Integrated and Ultrasensitive Gel Protein Identification

Characterization of an immobilized enzyme reactor for on-line protein digestion

Despite the developments for faster liquid chromatographic and mass spectral detection techniques, the standard in-solution protein digestion for proteomic analyses has remained relatively unchanged. The typical in-solution trypsin protein digestion is usually the slowest part of the workflow, albeit one of the most important. The development of a highly efficient immobilized enzyme reactor (IMER) with rapid performance for on-line protein digestion would greatly decrease the analysis time involved in a proteomic workflow. Presented here is the development of a silica based IMER for on-line protein digestion, which produced rapid digestions in the presence of organic mobile phase for both model proteins and a complex sample consisting of the insoluble portion of a yeast cell lysate. Protein sequence coverage and identifications evaluated between the IMER and in-solution digestions were comparable. Overall, for a yeast cell lysate with only a 10s volumetric residence time on-column, the IMER identified 507 proteins while the in-solution digestion identified 490. There were no significant differences observed based on identified protein's molecular weight or isoelectric point between the two digestion methods. Implementation of the IMER into the proteomic workflow provided similar protein identification results, automation for sample analysis, and reduced the analysis time by 15h.

An integrated high-performance liquid chromatography-mass spectrometry system for the activity-dependent analysis of matrix metalloproteases

Matrix metalloproteases (MMPs) comprise a family of enzymes that play important roles in mediating angiogenesis, the remodelling of tissues and in cancer metastasis. Consequently, they are attractive targets for therapeutic intervention in chronic inflammation, cancer and neurological disorders. In order to study MMPs in body fluids in an activity-dependent manner, we have developed an automated, integrated system comprising an immobilized inhibitor cartridge for activity-dependent enrichment, an immobilized trypsin reactor for rapid on-line proteolysis and a capillary or nanoLC-MS system for separation and identification of the obtained peptide fragments. This targeted proteomics system was optimized with respect to recovery and evaluated through the analysis of urine samples that were spiked with recombinant MMP-12. MMP-12 specific peptide fragments were easily detected in a nanoLC-MS analysis of 500 microL crude urine spiked at a level of 8 nM. These results show the feasibility of selective, activity-dependent enrichment of MMPs from a non-treated biofluid at low nM concentrations.

Capillary electrophoresis mass spectrometry coupling with immobilized enzyme electrospray capillaries

Open tubular capillary enzyme reactors were studied for rapid protein digestion and possible on-line integration into a CE/ESI/MS system. The need to minimize the time of the analyte molecules to diffuse towards the surface immobilized enzyme and to maximize the surface-to-volume (S/V) ratio of the open tubular reactors dictated the use of very narrow bore capillaries. Extremely small protein amounts (atto-femtomoles loaded) could be digested with enzymes immobilized directly on the inside wall of a 10 microm I.D. capillary. Covalently immobilized L-1-tosylamido-2-phenylethyl chloromethyl ketone (TPCK)-trypsin and pepsin A were tested for the surface immobilization. The enzymatic activity was characterized in the flow-through mode with on-line coupling to electrospray ionization-time of flight-mass spectrometer (ESI/TOF-MS) under a range of protein concentrations, buffer pH's, temperatures and reaction times. The optimized reactors were tested as the nanospray needles for fast identification of proteins using CE-ESI/TOF-MS.

Characterization of a monolithic immobilized trypsin microreactor with on-line coupling to ESI-MS

The preparation and characterization of a miniaturized trypsin reactor using on-line coupling with an ESI-TOF mass spectrometer are described. L-1-Tosylamido-2-phenylethyl chloromethyl ketone-trypsin was covalently immobilized on poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith prepared in a 75 microm ID fused silica capillary resulting in a bioreactor with high local concentration of the proteolytic enzyme. Covalent immobilization of trypsin on this support was performed using the epoxide functional groups in either a one- or a multistep reaction. For on-line protein digestion-MS analysis the bioreactor was coupled with the mass spectrometer using a liquid junction microelectrospray interface. The performance of the reactor was tested using an on-line flow through the system with flow rates of 50-300 nL/min. The resulting protein consumption was in the atto- to low femtomole range. Proteolytic activity was characterized in a wide range of conditions with respect to the flow rate, pH, and temperature. Complete protein digestion was achieved in less than 30 s at 25 degrees C with the sequence coverage of 80% (cytochrome c), which is comparable to 3 h digestion in solution at 37 degrees C. Besides the good performance at laboratory temperature, the immobilized trypsin in the bioreactor also performed well at lower pH compared to the standard in-solution protocols.

Enzymatic microreactors in chemical analysis and kinetic studies

The fields of application of microreactors are becoming wider every year. A considerable number of papers have been published recently reporting successful application of enzymatic microreactors in chemistry and biochemistry. Most are devices with enzymes immobilized on beads or walls of microfluidic channels, whilst some use dissolved enzymes to run a reaction in the microfluidic system. Apart from model systems, mostly with glucose oxidase, horseradish peroxidase and alkaline phosphatase, the principal fields of application of microreactors are tryptic digestion of proteins and polymerase chain reaction in automated analyses of proteomic and genetic material, respectively. Enzymatic microreactors also facilitate characterization of enzyme activity as a function of substrate concentration, and enable fast screening of new biocatalysts and their substrates. They may constitute key parts of lab-on-a-chip and muTAS, assisting the analysis of biomolecules. This review provides systematic coverage of examples of reports on enzymatic microreactors published recently, as well as relevant older papers.

Prototype for integrated two-dimensional gel electrophoresis for protein separation

Two-dimensional gel electrophoresis practitioners have long waited for a fully automated system. This article presents an integrated platform that is capable of complete automation from sample introduction to spots detection. The strip gel for the first dimensional separation is fixed on the edge of a discrete planar stage before separation. A pair of platinum pin electrodes for isoelectric focusing (IEF) makes contact from underneath the stage. IEF is performed directly after rehydration and protein loading. After the first dimensional separation, sodium dodecyl sulfate (SDS) equilibration is done on the same stage without moving the gel. The IEF stage is then moved horizontally to couple with a precast second dimensional gel. The <0.5 mm gap between the two gels is filled with poly (ethylene oxide) solution. After SDS-polyacrylamide gel electrohporesis separation, a charge-coupled device camera is used to detect spots via protein native fluorescence excited by a Hg (Xe) lamp with the gel inside the running cell. Potential for full automation is demonstrated with 0.5 microg of Escherichia coli proteins on this miniaturized platform. More than 240 spots are detected in a total experiment time of <2.5 h.

Immobilized microfluidic enzymatic reactors

The use of enzymes for cleavage, synthesis or chemical modification represents one of the most common processes used in biochemical and molecular biology laboratories. The continuing progress in medical research, genomics, proteomics, and related emerging biotechnology fields leads to exponential growth of the applications of enzymes and the development of modified or new enzymes with specific activities. Concurrently, new technologies are being developed to improve reaction rates and specificity or perform the reaction in a specific environment. Besides large-scale industrial applications, where typically a large processing capacity is required, there are other, much lower-scale applications, benefiting form the new developments in enzymology. One such technology is microfluidics with the potential to revolutionize analytical instrumentation for the analyses of very small sample amounts, single cells or even subcellular assemblies. This article aims at reviewing the current status of the development of the immobilized microfluidic enzymatic reactors (IMERs) technology.