Capillary Electrophoresis Absorption Detection Using Fiber-Loop Ring-Down Spectroscopy

Multiscattering-enhanced absorption spectroscopy

An original scheme for sensitive absorption measurements, particularly well-suited for low analyte concentrations, is presented. The technique is based on multiscattering-enhanced absorption spectroscopy (MEAS) and benefits from the advantages of conventional absorption spectroscopy: simplicity, rapidity, and low costs. The technique relies on extending the optical path through the sensing volume by suspending dielectric beads in the solution containing the analytes of interest, resulting in multiple scattering of light, which increases the optical path length through the sample. This way, a higher sensitivity and lower limit of detection, compared to those of conventional absorption spectroscopy, can be achieved. The approach is versatile and can be used for a broad variety of analytes. Here, it is applied to the detection of phenol red, 10 nm gold nanoparticles, and envy green fluorescence dye; the limit of detection is decreased by a factor of 7.2 for phenol red and a factor of 3.3 for nanoparticles and dye. The versatility of this approach is illustrated by its application in increasing the sensitivity of colorimetric detection with gold nanoparticle probes and a commercially available hydrogen peroxide bioassay. The influence of different parameters describing the scattering medium is investigated in detail experimentally and numerically, with very good agreement between the two. Those parameters can be effectively used to tailor the enhancement for specific applications and analytes.

Integrated fiber optic incoherent broadband cavity enhanced absorption spectroscopy detector for near-IR absorption measurements of nanoliter samples

An integrated fiber-optic sensor is described that uses incoherent broadband cavity enhanced absorption spectroscopy for sensitive detection of aqueous samples in nanoliter volumes. Absorption was measured in a 100 µm gap between the ends of two short segments of multimode graded-index fiber that were integrated into a capillary using a precision machined V-grooved fixture that allowed for passive fiber alignment. The other ends of the fibers were coated with dielectric mirrors to form a 9.5 cm optical resonator. Light from a fiber-coupled superluminescent diode was directly coupled into one end of the cavity, and transmission was measured using a fiber-coupled silicon photodiode. Dilute aqueous solutions of near infrared dye were used to determine the minimum detectable absorption change of 2.4×10(-4) under experimental conditions in which pressure fluctuations limited performance. We also determined that the absolute minimum detectable absorption change would be 1.6×10(-5) for conditions of constant pressure in which absorption measurement is limited by electronic and optical noise. Tolerance requirements for alignment are also presented.

Absorption detection using optical waveguide cavities

Cavity ring-down spectroscopy is a spectroscopic method that uses a high quality optical cavity to amplify the optical loss due to the light absorption by a sample. In this presentation we highlight two applications of phase-shift cavity ring-down spectroscopy that are suited for absorption measurements in the condensed phase and make use of waveguide cavities. In the first application, a fiber loop is used as an optical cavity and the sample is introduced in a gap in the loop to allow absorption measurements of nanoliters of solution at the micromolar level. A second application involves silica microspheres as high finesse cavities. Information on the refractive index and absorption of a thin film of ethylene diamine on the surface of the microresonator is obtained simultaneously by the measurements of the wavelength shift of the cavity mode spectrum and the change in optical decay time, respectively.

Chemical sensing using fiber cavity ring-down spectroscopy

Waveguide-based cavity ring-down spectroscopy (CRD) can be used for quantitative measurements of chemical concentrations in small amounts of liquid, in gases or in films. The change in ring-down time can be correlated to analyte concentration when using fiber optic sensing elements that change their attenuation in dependence of either sample absorption or refractive index. Two types of fiber cavities, i.e., fiber loops and fiber strands containing reflective elements, are distinguished. Both types of cavities were coupled to a variety of chemical sensor elements, which are discussed and compared.

Fiber loop ringdown - a time-domain sensing technique for multi-function fiber optic sensor platforms: current status and design perspectives

Fiber loop ringdown (FLRD) utilizes an inexpensive telecommunications light source, a photodiode, and a section of single-mode fiber to form a uniform fiber optic sensor platform for sensing various quantities, such as pressure, temperature, strain, refractive index, chemical species, biological cells, and small volume of fluids. In FLRD, optical losses of a light pulse in a fiber loop induced by changes in a quantity are measured by the light decay time constants. FLRD measures time to detect a quantity; thus, FLRD is referred to as a time-domain sensing technique. FLRD sensors have near real-time response, multi-pass enhanced high-sensitivity, and relatively low cost (i.e., without using an optical spectral analyzer). During the last eight years since the introduction of the original form of fiber ringdown spectroscopy, there has been increasing interest in the FLRD technique in fiber optic sensor developments, and new application potential is being explored. This paper first discusses the challenging issues in development of multi-function, fiber optic sensors or sensor networks using current fiber optic sensor sensing schemes, and then gives a review on current fiber optic sensor development using FLRD technique. Finally, design perspectives on new generation, multi-function, fiber optic sensor platforms using FLRD technique are particularly presented.

Liquid-phase and evanescent-wave cavity ring-down spectroscopy in analytical chemistry

Due to its simplicity, versatility, and straightforward interpretation into absolute concentrations, molecular absorbance detection is widely used in liquid-phase analytical chemistry. Because this method is inherently less sensitive than zero-background techniques such as fluorescence detection, alternative, more sensitive measurement principles are being explored. This review discusses one of these: cavity ring-down spectroscopy (CRDS). Advantages of this technique include its long measurement pathlength and its insensitivity to light-source-intensity fluctuations. CRDS is already a well-established technique in the gas phase, so we focus on two new modes: liquid-phase CRDS and evanescent-wave (EW)-CRDS. Applications of liquid-phase CRDS in analytical chemistry focus on improving the sensitivity of absorbance detection in liquid chromatography. Currently, EW-CRDS is still in early stages: It is used to study basic interactions between molecules and silica surfaces. However, in the future this method may be used to develop, for instance, biosensors with high specificity.

Multichannel-fiber ringdown sensor based on time-division multiplexing

A multichannel-fiber ringdown sensor based on the principle of time-division multiplexing is described. The purpose of multiplexing is to obtain the information of one or more fiber ringdown sensor heads simultaneously under the premise of cost neutrality. To illustrate the principle, we study the typical dual-channel fiber ringdown force sensor in our experiment. It shows that the pressures at two different points can be measured simultaneously. In addition, we find by measurement that our sensors have good linear responses above the response threshold of the applied force.