Loss of Bonded Phase in Reversed-Phase Liquid Chromatography in Acidic Eluents and Practical Ways To Improve Column Stability

Efficient mapping of lignin depolymerization product pools and quantification of specific monomers through rapid GPC-HPLC-UV/VIS analysis

BACKGROUND

Growing research on lignin depolymerization to functionalized bio-aromatics has necessitated dedicated analysis techniques. However, immense variability in molecular weight and functional groups of the depolymerization products impedes fast analysis of a large number of samples while remaining in-depth enough for catalyst screening or reaction condition optimization. While GPC-HPLC-UV/VIS has been a promising technique, up until now, the information it provides is largely qualitative. By enabling quantification of key monomeric products and through further reduction of overall analysis time, this study aims to increase the potential of GPC-HPLC-UV/VIS for fast and in-depth characterization of lignin depolymerization product pools.

RESULTS

Analysis of selected samples, isolated from GPC-HPLC-UV/VIS analyses of lignin depolymerization product pools, with gas chromatography (GC) equipped with an Orbitrap high-resolution accurate mass spectrometer (Orbitrap-HR/AM-MS) is successful in identifying the main low monomeric products. Moreover, these identifications are further substantiated through GPC-HPLC-UV/VIS analysis of standards. Furthermore, straight forward quantification of these products directly within GPC-HPLC-UV/VIS is successfully developed with limits of detection ≤0.05 mmol/L, which is at least on par with more complex analysis techniques. Additionally, several different reversed phase columns are assessed to reduce 2nd dimension (2D) time and, hence, overall analysis time while maintaining the possibility for quantification. A reduction in overall analysis time of about 30% as compared to the state-of-the-art is achieved by using a YMC Triart BIO C4 column as 2D.

SIGNIFICANCE

Through the enhancements introduced in this study, GPC-HPLC-UV/VIS emerges as a unique technique for the analysis of lignin depolymerization product pools, which is capable of fast yet sufficiently in-depth analysis of a large volume of samples. This capability is indispensable for catalyst screening and fine-tuning reaction conditions.

Managing nonspecific adsorption to liquid chromatography hardware: A review

The choice of alternative materials over stainless steel hardware in the construction of liquid chromatography systems has unveiled the degree to which nonspecific adsorption impacts the reproducibility of LC methods. Some of the major contributors to nonspecific adsorption losses are charged metallic surfaces and leached metallic impurities, that may interact with the analyte and result in analyte loss and overall poor chromatographic performance. In this review, we describe several mitigation strategies available to chromatographers to minimize nonspecific adsorption to chromatographic systems. Alternative surfaces to stainless steel such as titanium, PEEK, and hybrid surface technologies are discussed. Furthermore, mobile phase additives used to prevent metal ion-analyte interactions are reviewed. Nonspecific adsorption of analytes is not reserved to metallic surfaces, as analytes may adsorb to the surfaces of filters, tubes, and pipette tips during sample preparation. Identifying the source of nonspecific interactions is paramount, as mitigation strategies may differ depending on what stage nonspecific losses are taking place. With this in mind, we discuss diagnostic methods that may help the chromatographer to differentiate losses resulting from sample preparation, and losses during LC runs.

Evaluation of hybrid surface technology for the analysis of the B-group vitamins by LC-ESI-MS/MS

Recently, a novel hybrid surface technology (HST) has been developed to mitigate metal analyte adsorption in liquid chromatography. The HST provides a hybrid organic-inorganic surface on the metal fluidic path, from injection to detector and including the column frits and wall, to mitigate the interaction between analytes and metals. Here the impact of the HST on the analysis of B group vitamins using liquid chromatography coupled with electrospray tandem mass spectrometry (LC-ESI-MS/MS) has been evaluated. Significant improvements in analyte intensity, limit of quantification (LOQ), carry-over, and peak shape were observed using an LC-ESI-MS/MS system and column that incorporated the HST. The key observed improvements include a 3-10 times increase in sensitivity (providing a lower LOQ) for riboflavin, thiamine, nicotinamide, FMN, PLP, and 5MTHF, no carry-over, and a more symmetrical peak for thiamine. When applied to the analysis of B group vitamins in energy drinks and B vitamin dietary supplement samples, the HST system demonstrated excellent accuracy and repeatability.

Some factors that can lead to poor peak shape in hydrophilic interaction chromatography, and possibilities for their remediation

Some factors which present difficulties for obtaining good peak shape in hydrophilic interaction chromatography (HILIC) were studied. The effect of injection solvent composition and volume was systematically investigated using a selection of weak and stronger basic compounds on a hybrid bare silica phase. Increasing the mismatch between the injection solvent (range 95-0% ACNv/v) and the mobile phase (maintained at 95% ACNv/v) gave increasing deterioration in peak shape. With the 2.1mm ID columns used, injections in the mobile phase of increasing volume (1-20 μL) gave poorer peak shape, but the magnitude of the effect was considerably smaller than that of solvent mismatch over this range. Some solute structural features such as galloyl (trihydroxy benzene), catechol (benzene diol) and phosphate (in nucleotides) gave serious peak tailing, attributed to interactions with metals in the stationary phase or the chromatographic hardware. These undesirable effects can be moderated by including complexing agents in the mobile phase, by changing the stationary phase chemistry, or by altering the mobile phase pH.

Transition metal-induced degradation of a pharmaceutical compound in reversed-phase liquid chromatographic analysis

Drug degradation that occurs in HPLC analysis, during either sample preparation or chromatographic separation, can greatly impact method robustness and result accuracy. In this work, we report a case study of drug dimerization in HPLC analysis where proximate causes were attributed to either the LC columns or the HPLC instrument. Solution stress studies indicated that the same pseudo-dimeric degradants could also be formed rapidly when the compound was exposed to certain oxidative transition metal ions, such as Cu(II) and Fe(III). Two pseudo-dimeric degradants were isolated from transition metal stressed samples and their structures were elucidated. A degradation pathway was proposed, whereby the degradation was initiated through transition metal-induced single electron transfer oxidation. Further studies confirmed that the dimerization was induced by trace transition metals in the HPLC flow path, which could arise from either the stainless steel frits in the LC column or stainless steel tubing in the HPLC instrument. Various procedures to prevent transition metal-induced drug degradation were explored, and a general strategy to mitigate such risks is briefly discussed.

Novel ultra stable silica-based stationary phases for reversed phase liquid chromatography--study of a hydrophobically assisted weak acid cation exchange phase

A mixed-mode reversed-phase/weak cation exchange (RP/WCX) phase has been developed by introducing a small amount of carboxylate functionality into a hydrophobic hyper-crosslinked (HC) platform. This silica-based HC platform was designed to form an extensive polystyrene network completely confined to the particle's surface. The fully connected polymer network prevents the loss of bonded phase, which leads to superior hydrolytic stability of the new phase when compared to conventional silica-based phases. Compared to previously introduced HC phases the added carboxylic groups impart a new weak cation exchange selectivity to the base hydrophobic HC platform. The phase thus prepared shows a mixed-mode retention mechanism, allowing for both neutral organic compounds and bases of a wide polarity range to be simultaneously separated on the same phase under the same conditions. In addition, the new phase offers the flexibility that gradients in organic modifier, pH or ionic competitors can be used to affect the separation of a wide range of solutes. Moreover, the inherent weak acid cation exchange groups allow formic and acetic acid buffers to be used as eluents thereby avoiding the mass spectrometric ionization suppression problems concomitant to the use of non-volatile additives such as strong amine modifiers (e.g. triethylamine) or salts (e.g. NaCl) to elute basic solutes from the strong cation exchange phase which was previously developed in this lab. The use of the new phase for achieving strong retention of rather hydrophilic neurotransmitters and drugs of abuse without the need for ion pairing agents is demonstrated.

Application of silica-based hyper-crosslinked sulfonate-modified reversed stationary phases for separating highly hydrophilic basic compounds

The separation and determination of hydrophilic basic compounds are of great importance in many fields including clinical and biological research, pharmaceutical development and forensic analysis. However, the most widely used analytical separation technique in these disciplines, reversed-phase liquid chromatography (RPLC), usually does not provide sufficient retention for several important classes of highly hydrophilic basic compounds including catecholamines, many drug metabolites and many drugs of abuse. Commonly eluents having little or no organic modifier and/or strong ion pairing agents must be used to achieve sufficient retention and separation. Use of highly aqueous eluents can lead to column failure by dewetting, resulting in poor retention, low selectivity and irreproducibility and slow recovery of performance. The use of a strong ion pairing agent to increase retention renders the separation incompatible with mass spectrometric detection and complicates preparative separations. This paper describes the successful applications of a novel type of silica-based, hyper-crosslinked, sulfonate-modified reversed stationary phase, denoted as (-)SO(3)-HC-C(8)-L, for the separation of highly hydrophilic cations and related compounds by a hydrophobically assisted cation-exchange mechanism. Compared to conventional reversed-phases, the (-)SO(3)-HC-C(8)-L phase showed significantly improved retention and separation selectivity for hydrophilic amines. Concurrently, due to the presence of both cation-exchange and reversed-phase retention mechanisms and the high acid stability of hyper-crosslinked phases, the separation can be optimized by changing the type or concentration of ionic additive or organic modifier, and by varying the column temperature. In addition, gradients generated by programming the concentration of either the ionic additive or the organic modifier can be applied to reduce the analysis time without compromising resolution. Furthermore, remarkably different chromatographic selectivities, especially toward cationic solutes, were observed upon comparing the (-)SO(3)-HC-C(8)-L phase with conventional reversed-phases. We believe that the combination of these two types of stationary phases will be very useful in two-dimensional liquid chromatography.

Synthesis and characterization of silica-based hyper-crosslinked sulfonate-modified reversed stationary phases

A novel type of silica-based sulfonate-modified reversed phase ((-)SO3-HC-C8) has been synthesized; it is based on a newly developed acid stable "hyper-crosslinked" C8 derivatized reversed phase, denoted HC-C8. The (-)SO3-HC-C8 phases containing controlled amounts of sulfonyl groups were made by sulfonating the aromatic hyper-crosslinked network of the HC-C(8) phase at different temperatures. The (-)SO3-HC-C8 phases are only slightly less hydrophobic than the parent HC-C8 phase. The added sulfonyl groups provide a unique strong cation-exchange selectivity to the hydrophobic hyper-crosslinked substrate as indicated by the very large C coefficient as shown through Snyder's hydrophobic subtraction reversed-phase characterization method. This cation-exchange activity clearly distinguishes the sulfonated phase from all other reversed phases as confirmed by the very high values of Snyder's column comparison function F(s). In addition, as was found in previous studies of silica-based and zirconia-based reversed phases, a strong correlation between the cation-exchange interaction and hydrophobic interaction was observed for these sulfonated phases in studies of the retention of cationic solutes. The overall chromatographic selectivity of these (-)SO3-HC-C8 phases is greatly enhanced by its high hydrophobicity through a "hydrophobically assisted" ion-exchange retention process.