Amperometric immunosensor for the detection of anti-West Nile virus IgG

Advances in rapid point-of-care virus testing

Outbreaks of viral diseases seriously jeopardize people's health and cause huge economic losses. At the same time, virology provides a new perspective for biology, molecular biology and cancer research, and it is important to study the discovered viruses with potential applications. Therefore, the development of immediate and rapid viral detection methods for the prevention and treatment of viral diseases as well as the study of viruses has attracted extensive attention from scientists. With the continuous progress of science and technology, especially in the field of bioanalysis, a series of new detection techniques have been applied to the on-site rapid detection of viruses, which has become a powerful approach for human beings to fight against viruses. In this paper, the latest research progress of rapid point-of-care detection of viral nucleic acids, antigens and antibodies is presented. In addition, the advantages and disadvantages of these technologies are discussed from the perspective of practical application requirements. Finally, the problems and challenges faced by rapid viral detection methods and their development prospects are discussed.

Peptide-Based Flavivirus Biosensors: From Cell Structure to Virological and Serological Detection Methods

In tropical and developing countries, mosquito-borne diseases by flaviviruses pose a serious threat to public health. Early detection is critical for preventing their spread, but conventional methods are time-consuming and require skilled technicians. Biosensors have been developed to address this issue, but cross-reactivity with other flaviviruses remains a challenge. Peptides are essentially biomaterials used in diagnostics that allow virological and serological techniques to identify flavivirus selectively. This biomaterial originated as a small protein consisting of two to 50 amino acid chains. They offer flexibility in chemical modification and can be easily synthesized and applied to living cells in the engineering process. Peptides could potentially be developed as robust, low-cost, sensitive, and selective receptors for detecting flaviviruses. However, modification and selection of the receptor agents are crucial to determine the effectiveness of binding between the targets and the receptors. This paper addresses two potential peptide nucleic acids (PNAs) and affinity peptides that can detect flavivirus from another target-based biosensor as well as the potential peptide behaviors of flaviviruses. The PNAs detect flaviviruses based on the nucleotide base sequence of the target's virological profile via Watson-Crick base pairing, while the affinity peptides sense the epitope or immunological profile of the targets. Recent developments in the functionalization of peptides for flavivirus biosensors are explored in this Review by division into electrochemical, optical, and other detection methods.

Fast-response electrochemical biosensor based on a truncated aptamer and MXene heterolayer for West Nile virus detection in human serum

West Nile virus (WNV) is a mosquito-borne flavivirus that can cause West Nile fever, meningitis, encephalitis, and polio. Early detection of WNV is important to prevent infection spread on the field. To commercialize the electrochemical biosensor for WNV, rapid target detection with the cheap manufacture cost is essential. Here, we developed a fast-response electrochemical biosensor consisting of a truncated WNV aptamer/MXene (Ti3C2Tx) bilayer on round-type micro gap. To reduce the target binding time, the application of the alternating current electrothermal flow (ACEF) technology reduced the target detection time to within 10 min, providing a rapid biosensor platform. The MXene nanosheet improved electrochemical signal amplification, and the aptamer produced through systematic evolution of ligands by exponential enrichment process eliminated unnecessary base sequences via truncation and lowered the manufacturing cost. Under optimized conditions, the WNV limit of detection (LOD) and selectivity were measured using electrochemical measurement methods, including cyclic voltammetry and square wave voltammetry. The LOD was 2.57 pM for WNV diluted in deionized water and 1.06 pM for WNV diluted in 10% human serum. The fabricated electrochemical biosensor has high selectivity and allows rapid detection, suggesting the possibility of future application in the diagnosis of flaviviridae virus.

Strategies for Surface Immobilization of Whole Bacteriophages: A Review

Bacteriophage immobilization is a key unit operation in emerging biotechnologies, enabling new possibilities for biodetection of pathogenic microbes at low concentration, production of materials with novel antimicrobial properties, and fundamental research on bacteriophages themselves. Wild type bacteriophages exhibit extreme binding specificity for a single species, and often for a particular subspecies, of bacteria. Since their specificity originates in epitope recognition by capsid proteins, which can be altered by chemical or genetic modification, their binding specificity may also be redirected toward arbitrary substrates and/or a variety of analytes in addition to bacteria. The immobilization of bacteriophages on planar and particulate substrates is thus an area of active and increasing scientific interest. This review assembles the knowledge gained so far in the immobilization of whole phage particles, summarizing the main chemistries, and presenting the current state-of-the-art both for an audience well-versed in bioconjugation methods as well as for those who are new to the field.

Phage-Based Sensors in Medicine: A Review

Bacteriophages are interesting entities on the border of biology and chemistry. In nature, they are bacteria parasites, while, after genetic manipulation, they gain new properties, e.g., selectively binding proteins. Owing to this, they may be applied as recognition elements in biosensors. Combining bacteriophages with different transducers can then result in the development of innovative sensor designs that may revolutionize bioanalytics and improve the quality of medical services. Therefore, here, we review the use of bacteriophages, or peptides from bacteriophages, as new sensing elements for the recognition of biomarkers and the construction of the highly effective diagnostics tools.

Phage-based Electrochemical Sensors: A Review

Phages based electrochemical sensors have received much attention due to their high specificity, sensitivity and simplicity. Phages or bacteriophages provide natural affinity to their host bacteria cells and can serve as the recognition element for electrochemical sensors. It can also act as a tool for bacteria infection and lysis followed by detection of the released cell contents, such as enzymes and ions. In addition, possible detection of the other desired targets, such as antibodies have been demonstrated with phage display techniques. In this paper, the recent development of phage-based electrochemical sensors has been reviewed in terms of the different immobilization protocols and electrochemical detection techniques.

Detecting Biothreat Agents: From Current Diagnostics to Developing Sensor Technologies

Although a fundamental understanding of the pathogenicity of most biothreat agents has been elucidated and available treatments have increased substantially over the past decades, they still represent a significant public health threat in this age of (bio)terrorism, indiscriminate warfare, pollution, climate change, unchecked population growth, and globalization. The key step to almost all prevention, protection, prophylaxis, post-exposure treatment, and mitigation of any bioagent is early detection. Here, we review available methods for detecting bioagents including pathogenic bacteria and viruses along with their toxins. An introduction placing this subject in the historical context of previous naturally occurring outbreaks and efforts to weaponize selected agents is first provided along with definitions and relevant considerations. An overview of the detection technologies that find use in this endeavor along with how they provide data or transduce signal within a sensing configuration follows. Current "gold" standards for biothreat detection/diagnostics along with a listing of relevant FDA approved in vitro diagnostic devices is then discussed to provide an overview of the current state of the art. Given the 2014 outbreak of Ebola virus in Western Africa and the recent 2016 spread of Zika virus in the Americas, discussion of what constitutes a public health emergency and how new in vitro diagnostic devices are authorized for emergency use in the U.S. are also included. The majority of the Review is then subdivided around the sensing of bacterial, viral, and toxin biothreats with each including an overview of the major agents in that class, a detailed cross-section of different sensing methods in development based on assay format or analytical technique, and some discussion of related microfluidic lab-on-a-chip/point-of-care devices. Finally, an outlook is given on how this field will develop from the perspective of the biosensing technology itself and the new emerging threats they may face.

Ultrasensitive and rapid immuno-detection of human IgE anti-therapeutic horse sera using an electrochemical immunosensor

Antivenom allergy disease mediated by patient IgE is an important public health care concern. To improve detection of hypersensitive individuals prior to passive antibody therapy, an amperometric immunosensor was developed to detect reactive human IgE. Whole horse IgG3 (hoIgG3) was immobilized onto the surface of carbon or gold screen-printed electrodes through a cross-linking solution of glutaraldehyde on a chitosan film. Sera from persons with a known allergic response to hoIgG3 or non-allergic individuals was applied to the sensor. Bound human IgE (humIgE) was detected by an anti-humIgE antibody through a quantitative amperometric determination by tracking via the electrochemical reduction of the quinone generated from the hydroquinone with the application of a potential of 25 mV. The optimal immunosensor configuration detected reactive humIgE at a dilution of 1:1800 of the human sera that represent a detection limit of 0.5 pg/mL. Stability testing demonstrated that through 20 cycles of a scan, the specificity and performance remained robust. The new immunosensor successfully detected humIgE antibodies reactive against hoIgG3, which could allow the diagnosis of potential allergenic patients needing therapeutic antivenom preparations from a horse.

Virus-Enabled Biosensor for Human Serum Albumin

The label-free detection of human serum albumin (HSA) in aqueous buffer is demonstrated using a simple, monolithic, two-electrode electrochemical biosensor. In this device, both millimeter-scale electrodes are coated with a thin layer of a composite containing M13 virus particles and the electronically conductive polymer poly(3,4-ethylenedioxy thiophene) or PEDOT. These virus particles, engineered to selectively bind HSA, serve as receptors in this biosensor. The resistance component of the electrical impedance, Zre, measured between these two electrodes provides electrical transduction of HSA binding to the virus-PEDOT film. The analysis of sample volumes as small as 50 μL is made possible using a microfluidic cell. Upon exposure to HSA, virus-PEDOT films show a prompt increase in Zre within 5 s and a stable Zre signal within 15 min. HSA concentrations in the range from 100 nM to 5 μM are detectable. Sensor-to-sensor reproducibility of the HSA measurement is characterized by a coefficient-of-variance (COV) ranging from 2% to 8% across this entire concentration range. In addition, virus-PEDOT sensors successfully detected HSA in synthetic urine solutions.

Amperometric bioaffinity sensing platform for avian influenza virus proteins with aptamer modified gold nanoparticles on carbon chips

A sandwich assay platform involving a surface formed aptamer-protein-antibody complex was developed to obtain the highly selective and sensitive amperometric detection of H5N1 viral proteins using a gold nanoparticle (NP) modified electrode. This is the first aptamer-antibody pairing reported for the selective detection of H5N1. Nanoparticle deposited screen-printed carbon electrodes were first functionalized by the covalent immobilization of a DNA aptamer specific to H5N1 followed by the adsorption of H5N1 protein. Alkaline phosphatase (ALP) conjugated monoclonal antibody was then adsorbed to form a surface bound Au NPs-aptamer/H5N1/antiH5N1-ALP sandwich complex which was further reacted with the enzyme substrate, 4-amino phenyl phosphate (APP). The current associated with the electrocatalytic reaction of the surface bound ALP with APP increased as the H5N1 concentration increased. A lowest detectable concentration of 100 fM was obtained with a linear dynamic range of 100 fM to 10 pM using differential pulse voltammetry. As an example, the biosensor was applied to the detection of H5N1 protein in diluted human serum samples spiked with different concentrations of the viral protein target.

Electrochemical immunosensor for detection of antibodies against influenza A virus H5N1 in hen serum

This paper describes the development of an immunosensor for detection of anti-hemagglutinin antibodies. Its preparation consists of successive modification steps of glassy carbon electrodes: (i) creation of COOH groups, (ii) covalent immobilization of protein A with EDC/NHS coupling reaction, (iii) covering with anti-His IgG monoclonal antibody, (iv) immobilization of the recombinant His-tagged hemagglutinin (His6-H5 HA), (v) filling free space with BSA. The interactions between two variants of recombinant HA (short and long) from highly pathogenic avian influenza virus H5N1 and the anti-H5 HA monoclonal antibody (Mab 6-9-1) have been explored with electrochemical impedance spectroscopy (EIS). The impedimetric immunosensor displayed a very good detection limit (LOD) of 2.1 pg/mL, the quantification limit (LOQ) of 6.3 pg/mL and a dynamic range from 4 pg/mL to 20 pg/mL. In addition, this analytical device was applied for detection of antibodies against His6-H5 HA in serum of vaccinated hen using serial 10-fold dilutions of serum. The immunosensor proposed was able to detect antibody in hen serum diluted up to 7 × 10(7)-fold. The sensitivity of immunosensor was about four orders of magnitude much better than ELISA.

Sub-nanomolar detection of prostate-specific membrane antigen in synthetic urine by synergistic, dual-ligand phage

The sensitive detection of cancer biomarkers in urine could revolutionize cancer diagnosis and treatment. Such detectors must be inexpensive, easy to interpret, and sensitive. This report describes a bioaffinity matrix of viruses integrated into PEDOT films for electrochemical sensing of prostate-specific membrane antigen (PSMA), a prostate cancer biomarker. High sensitivity to PSMA resulted from synergistic action by two different ligands to PSMA on the same phage particle. One ligand was genetically encoded, and the secondary recognition ligand was chemically synthesized to wrap around the phage. The dual ligands result in a bidentate binder with high-copy, dense ligand display for enhanced PSMA detection through a chelate-based avidity effect. Biosensing with virus-PEDOT films provides a 100 pM limit of detection for PSMA in synthetic urine without requiring enzymatic or other amplification.

Quinone-based polymers for label-free and reagentless electrochemical immunosensors: application to proteins, antibodies and pesticides detection

Polyquinone derivatives are widely recognized in the literature for their remarkable properties, their biocompatibility, simple synthesis, and easy bio-functionalization. We have shown that polyquinones present very stable electroactivity in neutral aqueous medium within the cathodic potential domain avoiding side oxidation of interfering species. Besides, they can act as immobilized redox transducers for probing biomolecular interactions in sensors. Our group has been working on devices based on such modified electrodes with a view to applications for proteins, antibodies and organic pollutants using a reagentless label-free electrochemical immunosensor format. Herein, these developments are briefly reviewed and put into perspective.

Virus-poly(3,4-ethylenedioxythiophene) biocomposite films

Virus-poly(3,4-ethylenedioxythiophene) (virus-PEDOT) biocomposite films are prepared by electropolymerizing 3,4-ethylenedioxythiophene (EDOT) in aqueous electrolytes containing 12 mM LiClO(4) and the bacteriophage M13. The concentration of virus in these solutions, [virus](soln), is varied from 3 to 15 nM. A quartz crystal microbalance is used to directly measure the total mass of the biocomposite film during its electrodeposition. In combination with a measurement of the electrodeposition charge, the mass of the virus incorporated into the film is calculated. These data show that the concentration of the M13 within the electropolymerized film, [virus](film), increases linearly with [virus](soln). The incorporation of virus particles into the PEDOT film from solution is efficient, resulting in a concentration ratio of [virus](film):[virus](soln) ≈ 450. Virus incorporation into the PEDOT causes roughening of the film topography that is observed using scanning electron microscopy and atomic force microscopy (AFM). The electrical conductivity of the virus-PEDOT film, measured perpendicular to the plane of the film using conductive tip AFM, decreases linearly with virus loading, from 270 μS/cm for pure PEDOT films to 50 μS/cm for films containing 100 μM virus. The presence on the virus surface of displayed affinity peptides did not significantly influence the efficiency of incorporation into virus-PEDOT biocomposite films.

Approaches for the development of rapid serological assays for surveillance and diagnosis of infections caused by zoonotic flaviviruses of the Japanese encephalitis virus serocomplex

Flaviviruses are responsible for a number of important mosquito-borne diseases of man and animals globally. The short vireamic period in infected hosts means that serological assays are often the diagnostic method of choice. This paper will focus on the traditional methods to diagnose flaviviral infections as well as describing the modern rapid platforms and approaches for diagnostic antigen preparation.

Virus-poly(3,4-ethylenedioxythiophene) composite films for impedance-based biosensing

Composite films composed of poly(3,4-ethylenedioxythiophene), PEDOT, and the filamentous virus M13-K07 were prepared by electrooxidation of 3,4-ethylenedioxythiophene (EDOT) in aqueous solutions containing 8 nM of the virus at planar gold electrodes. These films were characterized using atomic force microscopy and scanning electron microscopy. The electrochemical impedance of virus-PEDOT films increases upon exposure to an antibody (p-Ab) that selectively binds to the M13 coat peptide. Exposure to p-Ab causes a shift in both real (Z(RE)) and imaginary (Z(IM)) impedance components across a broad range of frequencies from 50 Hz to 10 kHz. Within a narrower frequency range from 250 Hz to 5 kHz, the increase of the total impedance (Z(total)) with p-Ab concentration conforms to a Langmuir adsorption isotherm over the concentration range from from 6 to 66 nM, yielding a value for K(d) = 16.9 nM at 1000 Hz.

Flow-through immunosensors using antibody-immobilized polymer monoliths

High-sensitivity and rapid flow-through immunosensors based on photopolymerized surface-reactive polymer monoliths are investigated. The porous monoliths were synthesized within silica capillaries from glycidyl methacrylate and ethoxylated trimethylolpropane triacrylate precursors, providing a tortuous pore structure with high surface area for the immobilization of antibodies or other biosensing ligands. The unique morphology of the monolith ensures efficient mass transport and interactions between solvated analyte molecules and covalently immobilize antibodies anchored to the monolith surface, resulting in rapid immunorecognition. The efficacy of this approach is demonstrated through a direct immunoassay model using anti-IgG as a monolith-bound capture antibody and fluorescein-labeled IgG as an antigen. In situ antigen measurements exhibited a linear response over a concentration range between 0.1 and 50 ng/mL with 5 min assay times, while controllable injection of 1 μL volumes of antigen through the monolith elements yielded a mass detection limit of 100 pg ((∼700amol). These results suggest that porous monolith supports represent a flexible and promising material for the fabrication of rapid and sensitive immunosensors suitable for integration into capillary or microfluidic devices.

Trends and Perspectives of Biosensors for Food and Environmental Virology

Food and environmental virology has become a very important and interesting area of research because of food safety and public health concerns. During the last few decades, increasing foodborne diseases and environmental generated illnesses are considered to be highly challenging issues. Biosensor technology holds great promise for the healthcare market, and the security sector. Similar to clinical diagnostic tools, biosensors are being developed for the rapid, reliable, yet inexpensive identification and enumeration of pathogenic viruses which are adulterating environment, food and feed commodities. In this modern era, bio-and nano-technologies play a pivotal role in virological diagnostics of food industry, environmental and veterinary samples. This review covers the recent advances and future prospects of nanotechnology-based bioanalytical microsystems for food and environmental virology.

Antibody-based sensors: principles, problems and potential for detection of pathogens and associated toxins

Antibody-based sensors permit the rapid and sensitive analysis of a range of pathogens and associated toxins. A critical assessment of the implementation of such formats is provided, with reference to their principles, problems and potential for 'on-site' analysis. Particular emphasis is placed on the detection of foodborne bacterial pathogens, such as Escherichia coli and Listeria monocytogenes, and additional examples relating to the monitoring of fungal pathogens, viruses, mycotoxins, marine toxins and parasites are also provided.

Rapid and accurate in vitro assays for detection of West Nile virus in blood and tissues

West Nile virus (WNV) is a mosquito-borne single-stranded RNA virus, which has relatively recently emerged as a blood transfusion and organ transplantation transmissible pathogen. Low levels of WNV (viremia) are found in asymptomatic blood transfusion or cell/tissue donors with an infection, which poses a health threat to recipients. Since the introduction of nucleic acid testing (NAT) in 2003, many changes have occurred in the field of WNV detection and diagnosis. This review will focus on the recent progress in the in vitro assays for rapid and accurate detection of WNV in blood and tissues.

A glycosylated peptide in the West Nile virus envelope protein is immunogenic during equine infection

Using a monoclonal antibody directed to domain I of the West Nile virus (WNV) envelope (E) protein, we identified a continuous (linear) epitope that was immunogenic during WNV infection of horses. Using synthetic peptides, this epitope was mapped to a 19 aa sequence (WN19: E147-165) encompassing the WNV NY99 E protein glycosylation site at position 154. The inability of WNV-positive horse and mouse sera to bind the synthetic peptides indicated that glycosylation was required for recognition of peptide WN19 by WNV-specific antibodies in sera. N-linked glycosylation of WN19 was achieved through expression of the peptide as a C-terminal fusion protein in mammalian cells and specific reactivity of WNV-positive horse sera to the glycosylated WN19 fusion protein was shown by Western blot. Additional sera collected from horses infected with Murray Valley encephalitis virus (MVEV), which is similarly glycosylated at position E154 and exhibits high sequence identity to WNV NY99 in this region, also recognized the recombinant peptide. Failure of most WNV- and MVEV-positive horse sera to recognize the epitope as a deglycosylated fusion protein confirmed that the N-linked glycan was important for antibody recognition of the peptide. Together, these results suggest that the induction of antibodies to the WN19 epitope during WNV infection of horses is generally associated with E protein glycosylation of the infecting viral strain.

Micro- and nanotechnology for viral detection

Since the identification of viruses at the start of the 20th century, detecting their presence has presented great challenges. In the past two decades, there has been significant progress in viral detection methods for clinical diagnosis and environmental monitoring. The earliest advances were in molecular biology and imaging techniques. Advances in microfabrication and nanotechnology have now begun to play an important role in viral detection, and improving the detection limit, operational simplicity, and cost-effectiveness of viral diagnostics. Here we provide an overview of recent advances, focusing especially on advances in simple, device-based approaches for viral detection.

A novel electrochemical immunosensor based on ordered Au nano-prickle clusters

In this paper, we report a kind of ordered 3D Au nano-prickle clusters by directly electrodeposited on glassy carbon electrode utilizing the spatial obstruction/direction of the polycarbonate membrane. The proposed 3D nanoclusters are applied to fabricate a sandwich-type electrochemical immunosensor with human IgG as a model analyte. The electrodeposited Au nanoclusters build direct electrical contact and immobilization interface for protein molecules, which do not need post-modification and positioning. Scanning electron microscopy, cyclic voltammetry and alternating current impedance spectroscopy were used to investigate the properties of the modified interface. The deposited Au nanoclusters are stable with good biocompatibility, large specific surface area and high electron exchange capability. Under the optimized experimental conditions, a wide linear range from 1.0 to 10000.0 ng/mL was reached with a detection limit of 0.5 ng/mL. The calibration curve fits a second-order polynomial equation very well (R(2)=0.9914). The developed immunosensor based on Au nano-prickle clusters possesses advantages such as simple fabrication, fast response, low detection limit, wide linear range, easy regeneration, excellent reproducibility and long stability. To our knowledge, the Au nanostructure of special ordered 3D nano-prickle clusters is new for electrochemical immunosensor.

Phage-based label-free biomolecule detection in an opto-fluidic ring resonator

We have developed a sensitive and inexpensive opto-fluidic ring resonator (OFRR) biosensor using phage as a receptor for analyte detection. Phages have distinct advantages over antibodies as biosensor receptors. First, affinity selection from large libraries of random peptides displayed on phage provides a generic method of discovering receptors for detecting a wide range of analytes with high specificity and sensitivity. Second, phage production can be less complicated and less expensive than antibody production. Third, phages withstand harsh environments, reducing the environmental limitations and enabling regeneration of the biosensor surface. In this work, filamentous phage R5C2, displaying peptides that bind streptavidin specifically, was employed as a model receptor to demonstrate the feasibility of a phage-based OFRR biosensor. The experimental detection limit was approximately 100pM streptavidin and the K(d(apparent)) is 25pM. Specificity was verified using the RAP 5 phage, which is not specific to streptavidin, as the negative control. Sensing surface regeneration results show that the phage maintained functionality after surface regeneration, which greatly improves the sensors' reusability. The phage-based OFRR biosensor will become a promising platform for universal biomolecule detection with high sensitivity, low cost, and good reusability.

Affinity-based biosensors as promising tools for gene doping detection

Innovative bioanalytical approaches can be foreseen as interesting means for solving relevant emerging problems in anti-doping control. Sport authorities fear that the newer form of doping, so-called gene doping, based on a misuse of gene therapy, will be undetectable and thus much less preventable. The World Anti-Doping Agency has already asked scientists to assist in finding ways to prevent and detect this newest kind of doping. In this Opinion article we discuss the main aspects of gene doping, from the putative target analytes to suitable sampling strategies. Moreover, we discuss the potential application of affinity sensing in this field, which so far has been successfully applied to a variety of analytical problems, from clinical diagnostics to food and environmental analysis.