Sensitivity and working range of backside calibration potentiometry

Exploitation of o-benzoyl benzoic acid as an efficient electroactive material for selective determination of Cr (III) ions in pharmaceutical samples and industrial waste water using carbon sensor

Herein, for the first time, o-benzoyl benzoic acid has been explored as a promising electroactive material for the fabrication of sensitive, precise and accurate carbon paste electrode (CPE) for selective detection of Cr (III) ion. o-benzoyl benzoic acid (o-BBA) as a sensing material and tricresylphosphate (TCP) as a solvent mediator improved the developed sensor performance to get the Nernstian cationic slope of 20.03 ± 0.11 mV decade^-1 within the concentration range of 5.0 × 10^-7-1.0 × 10^-1 mol L^-1. The sensor displayed a fast response time of 12 s reflecting a pH independency over the pH range of 3.1-4.7. Moreover, the reaction between the sensing material and Cr (III) ion on the developed sensor surface was elucidated using the microscopic technique such as scanning electron microscope (SEM) in addition to the energy dispersive X-ray analyzer (EDX). The proposed sensor showed an adequate shelf lifetime (∼33 days). The values of potentiometric selectivity coefficient were obtained by fixed interference and separate solution methods affirming a high distinguishing power of the fabricated sensor toward Cr (III) ions over the other interfering ions. The established sensor could be utilized with a promising success for the Cr (III) ion estimation in the industrial waste water and in the pharmaceutical forms. Additionally, it has been employed as a promising indicator sensor with a superior performance for potentiometric titration of Cr (III) ion against EDTA.

Si-corrole-based fluoride fluorometric turn-on sensor

We present here a new type of fluoride ion optode, constituted by a highly lipophilic PVDF porous membrane modified with a liquid receptor layer containing the emission-active Si corrole F[Formula: see text] selective ionophore. For the optimized composition of the receptor layer, in acidic solutions an increase of Si-corrole emission was observed by increasing fluoride ion concentration, a behavior different from most porphyrinoid-based optical sensors. An observed linear dependence of the Si corrole emission intensity (read at 635 nm) was within the range 10[Formula: see text] to 10[Formula: see text] M of fluoride ions.

Electrospun nanofiber supported optodes: scaling down the receptor layer thickness to nanometers – towards 2D optodes

A novel type of optode sensor is proposed using electrospun nanofibers as the supporting inert material.

Synthesis and Characterization of Organic-Inorganic Nanocomposite Poly-o-anisidine Sn(IV) Arsenophosphate: Its Analytical Applications as Pb(II) Ion-Selective Membrane Electrode

Poly-o-anisidine Sn(IV) arsenophosphate is a newly synthesized nanocomposite material and has been characterized on the basis of its chemical composition, ion exchange capacity, TGA-DTA, FTIR, X-RAY, SEM, and TEM studies. On the basis of distribution studies, the exchanger was found to be highly selective for lead that is an environmental pollutant. For the detection of lead in water a heterogeneous precipitate based ion-selective membrane electrode was developed by means of this composite cation exchanger as electroactive material. The membrane electrode is mechanically stable, with a quick response time, and can be operated over a wide pH range. The selectivity coefficients were determined by mixed solution method and revealed that the electrode is sensitive for Pb(II) in presence of interfering cations. The practical utility of this membrane electrode has been established by employing it as an indicator electrode in the potentiometric titration of Pb(II).

Backside calibration chronopotentiometry: using current to perform ion measurements by zeroing the transmembrane ion flux

A recent new direction in ion-selective electrode (ISE) research utilizes a stir effect to indicate the disappearance of an ion concentration gradient across a thin ion-selective membrane. This zeroing experiment allows one to evaluate the equilibrium relationship between front and backside solutions contacting the membrane by varying the backside solution composition. This method is attractive since the absolute potential during the measurement is not required, thus avoiding standard recalibrations from the sample solution and a careful control of the reference electrode potential. We report here on a new concept to alleviate the need to continuously vary the composition of the backside solution. Instead, transmembrane ion fluxes are counterbalanced at an imposed critical current. A theoretical model illustrates the relationship between the magnitude of this critical current and the concentration of analyte and countertransporting ions and is found to correspond well with experimental results. The approach is demonstrated with lead(II)-selective membranes and protons as dominating interference ions, and the concentration of Pb(2+) was successfully measured in tap water samples. The principle was further evaluated with calcium-selective membranes and magnesium as counterdiffusing species, with good results. Advantages and limitations arising from the kinetic nature of the perturbation technique are discussed.