Sol−Gel Germania Triblock Polymer Coatings of Exceptional pH Stability in Capillary Microextraction Online-Coupled to High-Performance Liquid Chromatography

Tantala-based sol-gel coating for capillary microextraction on-line coupled to high-performance liquid chromatography

A sol-gel organic-inorganic hybrid sorbent, consisting of chemically integrated tantalum (V) ethoxide (TaEO) and polypropylene glycol methacrylate (PPGM), was developed for capillary microextraction (CME). The sol-gel sorbent was synthesized within a fused silica capillary through hydrolytic polycondensation of TaEO and chemical incorporation of PPGM into the evolving sol-gel tantala network. A part of the organic-inorganic hybrid sol-gel network evolving in the vicinity of the capillary walls had favorable conditions to get chemically bonded to the silanol groups on the capillary surface forming a surface-bonded coating. The newly developed sol-gel sorbent was employed to isolate and enrich a variety of analytes from aqueous samples for on-line analysis by high-performance liquid chromatography (HPLC) equipped with a UV detector. CME was performed on aqueous samples containing trace concentrations of analytes representing polycyclic aromatic hydrocarbons, ketones, alcohols, amines, nucleosides, and nucleotides. This sol-gel hybrid coating provided efficient extraction with CME-HPLC detection limits ranging from 4.41pM to 28.19 pM. Due to direct chemical bonding between the sol-gel sorbent coating and the fused silica capillary inner surface, this sol-gel sorbent exhibited enhanced solvent stability. The sol-gel tantala-based sorbent also exhibited excellent pH stability over a wide pH range (pH 0-pH 14). Furthermore, it displayed great performance reproducibility in CME-HPLC providing run-to-run HPLC peak area relative standard deviation (RSD) values between 0.23% and 3.83%. The capillary-to-capillary RSD (n=3), characterizing capillary preparation method reproducibility, ranged from 0.24% to 4.11%. The results show great performance consistency and application potential for the sol-gel tantala-PPGM sorbent in various fields including biomedical, pharmaceutical, and environmental areas.

Review of geometries and coating materials in solid phase microextraction: Opportunities, limitations, and future perspectives

The development of new support and geometries of solid phase microextraction (SPME), including metal fiber assemblies, coated-tip, and thin film microextraction (TFME) (i.e. self-supported, fabric and blade supported), as well as their effects on diffusion and extraction rate of analytes were discussed in the current review. Application of main techniques widely used for preparation of a variety of coating materials of SPME, including sol-gel technique, electrochemical and electrospinning methods as well as the available commercial coatings, were presented. Advantages and limitations of each technique from several aspects, such as range of application, biocompatibility, availability in different geometrical configurations, method of preparation, incorporation of various materials to tune the coating properties, and thermal and physical stability, were also investigated. Future perspectives of each technique to improve the efficiency and stability of the coatings were also summarized. Some interesting materials including ionic liquids (ILs), metal organic frameworks (MOFs) and particle loaded coatings were briefly presented.

Highly selective detection of polycyclic aromatic hydrocarbons using multifunctional magnetic-luminescent molecularly imprinted polymers

A facile method is presented for the selective luminescence detection of trace polycyclic aromatic hydrocarbons (PAHs) based on a combination of the specific recognition of molecularly imprinted polymers (MIPs) and magnetic separation (MS). Multifunctional magnetic-luminescent MIP nanocomposites were fabricated via a one-pot emulsion strategy using polystyrene-co-methacrylic acid copolymer, hydrophobic Fe3O4 nanoparticles and luminescent LaVO4:Eu(3+) nanoparticles as building blocks with a phenanthrene template. The resulting nanocomposites can be employed in a simple method for the luminescence detection of phenanthrene. Furthermore, magnetic separation of the nanocomposites from the target mixture prior to luminescence detection of phenanthrene affords significantly enhanced selectivity and sensitivity, with a 3σ limit of detection (LOD) as low as 3.64 ng/mL. Milk samples spiked with phenanthrene (5.0 μg/mL) were assayed via this method and recoveries ranging from 97.11 to 101.9% were obtained, showing that our strategy is potentially applicable for the preconcentration, recovering, and monitoring of trace PAHs in complex mixtures.

Thin-film octadecyl-silica glass coating for automated 96-blade solid-phase microextraction coupled with liquid chromatography-tandem mass spectrometry for analysis of benzodiazepines

A thin-film octadecyl (C18)-silica glass coating was developed as the extraction phase for an automated 96-blade solid-phase microextraction (SPME) system coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS). Various factors (e.g., sol-gel composition and aging time, coating preparation speed, coating thickness, and drying conditions) affecting the quality of C18-silica glass thin-film coating were studied and optimized. The results showed that the stability and durability of the coating are functions of the coating thickness and drying conditions. Coating thickness is controlled by sol-gel composition, aging time and the withdrawal speed in the dipping method. Automated sample preparation was achieved using a robotic autosampler that enabled simultaneous preparation of 96 samples in a 96-well plate format. Under the optimum SPME conditions the proposed system requires a total of 140 min for preparation of all 96 samples (i.e., 30 min preconditioning, 40 min equilibrium extraction, 40 min desorption and 30 min carry over step). The performance of the C18-silica glass 96-blade SPME system was evaluated for high-throughput analysis of benzodiazepines from phosphate-buffered saline solution (PBS) and human plasma, and the reusability, repeatability, and validity of the system were evaluated. When analysing spiked PBS and human plasma, the inter-blade reproducibility for four benzodiazepines was obtained in the ranges of 4-8% and 9-11% RSD (relative standard deviation), respectively, and intra-blade reproducibility were in the ranges of 3-9% and 8-13% RSD, respectively. The limits of detection and quantitation for plasma analysis were in the ranges of 0.4-0.7 ng/mL and 1.5-2.5 ng/mL for all four analytes.