Exploring Electrosorption at Iron Electrode with in Situ Surface-Enhanced Infrared Absorption Spectroscopy

Structural Degradation of M-N-C (M=Co, Ni and Fe) Single-Atom Electrocatalysts at Industrial-Grade Current Density for Long-Term Reduction

M-N-C single-atom catalysts (SACs) are promising electrode materials for many electro-reduction reactions. However, their stability is far from practical applications, and their deactivation mechanism has been rarely investigated. Herein, we demonstrate the structural degradation of M-N-C (M=Co, Ni, and Fe) at industrial-grade current density for long-term electro-reduction. Both M-N and N-C bonds are broken, resulting in the gradual hydrogenation and dissolution of N in the form of ammonia. The residual M is finally converted to M-containing core-shell nanoparticles after sequential dissolution, redeposition, and electro-reduction. The destruction of the M-N-C structure and the formation of nanoparticles greatly affect the electrocatalytic performance. Our work highlights the structural degradation and deactivation mechanism of M-N-C-type SACs under strong reductive conditions and provides useful information for inspiring researchers to develop new strategies to improve the electrocatalytic stability of similar types of materials.

Corrosion inhibitor distribution on abrasive-blasted steels

HYPOTHESIS

Abrasive-blasted steel surfaces exhibit a complex, multi-substrate environment. Adsorption to contaminant substrates can reduce the amount of available corrosion inhibitor and decrease its efficiency. Knowledge of where inhibitors preferentially adsorb is required.

EXPERIMENTS

The quantitative extent and strength of adsorption of the representative corrosion inhibitor benzotriazole (BTAH) from toluene to particular substrates is given, including corrections for solution self-association, and complemented by X-ray photoelectron spectroscopy (XPS), sum-frequency generation spectroscopy (SFG), and quartz crystal microbalance (QCM) measurements.

FINDINGS

All substrates show adsorbed BTAH layers. Based on the adsorption strength, preferential adsorption is found to be in the order steel > iron oxide > calcium carbonate and garnet > silica - this is relevant when there is limited BTAH. However, with ample BTAH, the amounts adsorbed in the plateau regions of the isotherm are more relevant and the order is calcium carbonate and silica > iron oxide > garnet > steel. Although the contaminant substrates deplete the BTAH concentration, the steel should still have a complete monolayer of BTAH inhibitor. This work is part of a larger initiative developing novel methods of corrosion inhibitor delivery via the blasting process, to prevent corrosion between blasting and repainting.

In situ monitoring of the selective adsorption mechanism of small environmental pollutant molecules on aptasensor interface by attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS)

In situ monitoring of the interactions and properties of pollutant molecules at the aptasensor interface is being a very hot and interesting topic in environmental analysis since its charming molecule level understanding of the mechanism of environmental biosensors. Attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) provides a unique and convenient technique for the in situ analysis, but is not easy for small molecules. Herein, an ATR-SEIRAS platform has been successfully developed to in situ monitor the selective adsorption mechanism of small pollutant molecule atrazine (ATZ) on the aptasensor interface by characteristic N‒H peak of ATZ for the first time. Based on the constructed ATR-SEIRAS platform, a thermodynamics model is established for the selective adsorption of ATZ on the aptasensor interface, described with Langmuir adsorption with a dissociation constant of 1.1 nM. The adsorption kinetics parameters are further obtained with a binding rate constant of 8.08×10⁵ M^-1 s^-1. A promising and feasible platform has therefore successfully provided for the study of the selective sensing mechanism of small pollutant molecules on biosensors interfaces, further broadening the application of ATR-SEIRAS technology in the field of small pollutant molecules.

Copper foam in situ loaded with precious metal nanoparticles as transmission SEIRAS substrate for rapid detection of dithiocarbamate pesticides

A transmission surface-enhanced infrared absorption spectroscopy (SEIRAS) substrate based on copper foam (CF) was developed for the rapid detection of dithiocarbamate (DTC) pesticides. The transmission SEIRAS substrate was prepared by immersing CF in a mixed solution of a precious metal solution and a polyvinyl pyrrolidone (PVP) solution. Then CF could be in situ loaded with precious metal nanoparticles (MNPs) by PVP-modified displacement reaction in seconds. PVP could be helpful for the uniform distribution of MNPs. Experimental parameters were evaluated with 11-mercaptoundecanoic acid (MUA) as a probe molecule, including the concentration of the precious metal solution, the amount of PVP, and the reaction time. Taking CF loaded with gold nanoparticles (Au NPs-CF) as an example, the signal intensity of DTC pesticide (Ziram) could be enhanced by two orders of magnitude, and the R² of the calibration curve was 0.999. In addition, the Pt NPs-CF substrate was applied to the rapid detection of other DTC pesticides (Ferbam). In summary, we have developed a new method to prepare the transmission SEIRAS substrate and apply it to the rapid detection of DTC pesticides in liquid.

In-Situ Infrared Spectroscopy Applied to the Study of the Electrocatalytic Reduction of CO2 : Theory, Practice and Challenges

The field of electrochemical CO₂ conversion is undergoing significant growth in terms of the number of publications and worldwide research groups involved. Despite improvements of the catalytic performance, the complex reaction mechanisms and solution chemistry of CO₂ have resulted in a considerable amount of discrepancies between theoretical and experimental studies. A clear identification of the reaction mechanism and the catalytic sites are of key importance in order to allow for a qualitative breakthrough and, from an experimental perspective, calls for the use of in-situ or operando spectroscopic techniques. In-situ infrared spectroscopy can provide information on the nature of intermediate species and products in real time and, in some cases, with relatively high time resolution. In this contribution, we review key theoretical aspects of infrared reflection spectroscopy, followed by considerations of practical implementation. Finally, recent applications to the electrocatalytic reduction of CO₂ are reviewed, including challenges associated with the detection of reaction intermediates.

Adsorption configuration of sodium 2-quinoxalinecarboxylate on iron substrate: Investigation by in situ SERS, XPS and theoretical calculation

The adsorption geometry of sodium 2-quinoxalinecarboxylate (2-QC) on iron surface was investigated by in situ surface-enhanced Raman scattering spectroscopy (SERS) and X-ray photoelectron spectroscopy (XPS) measurements. The density functional theory (DFT) calculations predicted that 2-QC ion was a highly efficient inhibitor and N as well as O atoms were the possible adsorption centers, and theoretically offered the Raman-active band position and intensity. Potential-dependent SERS results suggested that the 2-QC strongly bonded to the iron surface via the lone pair electrons of the two O atoms of the carboxylate group in a bidentate configuration with a vertical orientation at more positive potentials; However, at -1.0 V, only one O atom of the carboxylate and the neighboring N(1) atom (or very close to surface) adsorbed on the iron surface forming an unidentate configuration with a titled orientation. The ions did not remain on the iron surface at more negative potentials.