Low noise detection of biomolecular interactions with signal-locking surface plasmon resonance

Fluorescence Enhancement Using Bimetal Surface Plasmon-Coupled Emission from 5-Carboxyfluorescein (FAM)

We demonstrate the enhancement of fluorescence emission from a dye, 5-carboxyfluorescein (FAM), which couples with surface plasmons at the spectral channels of excitation and emission. Experiments and calculations revealed that bimetallic (gold-silver) plasmon, as compared to the monometallic ones, allowed such coupling to be enhanced, at both the spectral channels. We achieved the maximum fluorescence enhancement level of 46.5-fold, with markedly high reproducibility (coefficient of variation ~ 0.5%) at a FAM concentration of 10 nM. We also found that higher fluorescence enhancement was more likely to be reproducible. This encourages the use of this technology for practical applications in fluorescence-based biochemical assays. Moreover, we investigated a FAM concentration-dependent enhancement of fluorescence. It was found that fluorescence enhancement decreased and saturated at above 10 nM concentration possibly due to partial photo-bleaching of FAM molecules.

Kinetics of Reactive Modules Adds Discriminative Dimensions for Selective Cell Imaging

Living cells are chemical mixtures of exceptional interest and significance, whose investigation requires the development of powerful analytical tools fulfilling the demanding constraints resulting from their singular features. In particular, multiplexed observation of a large number of molecular targets with high spatiotemporal resolution appears highly desirable. One attractive road to address this analytical challenge relies on engaging the targets in reactions and exploiting the rich kinetic signature of the resulting reactive module, which originates from its topology and its rate constants. This review explores the various facets of this promising strategy. We first emphasize the singularity of the content of a living cell as a chemical mixture and suggest that its multiplexed observation is significant and timely. Then, we show that exploiting the kinetics of analytical processes is relevant to selectively detect a given analyte: upon perturbing the system, the kinetic window associated to response read-out has to be matched with that of the targeted reactive module. Eventually, we introduce the state-of-the-art of cell imaging exploiting protocols based on reaction kinetics and draw some promising perspectives.

Detection of Biomarkers for Different Diseases on Biosensor Surfaces Part II

In this chapter the authors analyze the binding and dissociation kinetics (if applicable) of (1) interferon-gamma as a function of aptamer variants and inclusion of spacer, (2) GST-N protein in PBS and GST-N protein in 10-fold diluted serum to a localized surface plasmon resonance coupled fluorescence biosensor, (3) cytochrome c mutant to a superoxide biosensor, (4) Carbonic Anhydrase-II to an 4-(2-aminoethyl)-benzene sulfonamide ligand on an surface plasmon resonance biosensor surface, (5) glycerol secretion from differentiated (murine 3T3-L1) adipocytes to a microfluidic platform for fluorescence-based assay, and (6) different concentrations of C-reactive protein in solution to a sandwich-type assay using reflectometric interference spectroscopy (label-free detection method).

Quantitative microfluidic biomolecular analysis for systems biology and medicine

In the postgenome era, biology and medicine are rapidly evolving towards quantitative and systems studies of complex biological systems. Emerging breakthroughs in microfluidic technologies and innovative applications are transforming systems biology by offering new capabilities to address the challenges in many areas, such as single-cell genomics, gene regulation networks, and pathology. In this review, we focus on recent progress in microfluidic technology from the perspective of its applications to promoting quantitative and systems biomolecular analysis in biology and medicine.

Ultrasensitive and selective gold film-based detection of mercury (II) in tap water using a laser scanning confocal imaging-surface plasmon resonance system in real time

An ultrasensitive and selective detection of mercury (II) was investigated using a laser scanning confocal imaging-surface plasmon resonance system (LSCI-SPR). The detection limit was as low as 0.01ng/ml for Hg(2+) ions in ultrapure and tap water based on a T-rich, single-stranded DNA (ssDNA)-modified gold film, which can be individually manipulated using specific T-Hg(2+)-T complex formation. The quenching intensity of the fluorescence images for rhodamine-labeled ssDNA fitted well with the changes in SPR. The changes varied with the Hg(2+) ion concentration, which is unaffected by the presence of other metal ions. The coefficients obtained for ultrapure and tap water were 0.99902 and 0.99512, respectively, for the linear part over a range of 0.01-100ng/ml. The results show that the double-effect sensor has potential for practical applications with ultra sensitivity and selectivity, especially in online or real-time monitoring of Hg(2+) ions pollution in tap water with the further improvement of portable LSCI-SPR instrument.

A droplet-based novel approach for viable and low volume consumption surface plasmon resonance bio-sensing inside a polydimethylsiloxane microchip

Over the course of last two decades, surface plasmon resonance (SPR) has emerged as a viable candidate for label-free detection and characterization for a large pool of biological interactions, ranging from hybridization of oligonucleotides to high throughput drug-screening. Conventional SPR bio-sensing involves a step-response method where the SPR sensorgram in response to a switched sequential flow of analyte and buffer is plotted in real-time and fitted to an exponential curve to extract the associative and dissociative reaction rates. Such measurement schemes involve continuous flow conditions where a substantial reagent volume is consumed and is subject to dispersive mixing at flow switching zones. In this paper, we demonstrate a new plug-train SPR technique in a microfluidic chip that separates and singulates solvent plugs in analyte and buffer by an immiscible air phase. Bio-samples are first discretized within plug droplets with volumes in order of few hundred nanoliters or less followed by pressure-driven transport onto SPR sensing sites of this hydrophobically modified SPR microdevise. The kinetic constants ka and kd for a model protein-small molecule interaction pair are extracted from a plug-train signal and are shown to be in reasonable agreement with our previous reports.

Fast measurement of binding kinetics with dual slope SPR microchips

We demonstrate a new dual slope SPR technique that is ten-fold faster than the conventional step-response method. The new scheme utilizes rapid slope-based measurements followed by rapid reset, and it separates association and dissociation half reaction measurements at two separate sites inside a dual-chamber PDMS microfluidic chip. For a model CAII-ABS test system, the association and dissociation slopes were measured in 30 seconds compared to 5 minutes for step-response. The values of k(a) and k(d) calculated from the slope method are 3.66 ± 0.19 × 10(3) M(-1) s(-1) and 4.83 ± 0.17 × 10(-2) s(-1), respectively, matching well with step-response values while facilitating ~10 to 15 fold faster detection and quantification.

Label-free detection of protein binding with multisine SPR microchips

Label-free techniques such as surface plasmon resonance (SPR) have used a step-response excitation method to characterize the binding of two biochemical entities. A major drawback of the step response technique is its high susceptibility to thermal drifts and noise which directly determine the minimum detectable binding mass. In this paper we present a new frequency-domain method based on the use of multisine chemical excitation that is much less sensitive to these disturbances. The multisine method was implemented in a PDMS microfluidic chip using a dual channel, dual multiplug chemical signal generator connected to functionalized and reference SPR binding spots. Kinetic constants for the reaction are extracted from the characteristics of the sense spot response versus frequency. The feasibility of the technique was tested using a model system of Carbonic Anhydrase-II analyte and amino-benzenesulfonamide ligand. The experimental signal to noise ratio (SNR) for the multisine measurement is about 32 dB; 7 dB higher than that observed with the single step-response method, while the overall measurement time is twice as long as the step method.