Neutral coatings for the study of polycation/multicharged anion interactions by capillary electrophoresis: application to dendrigraft poly-L-lysines with negatively multicharged molecules

Spectroscopic and solution properties characterization of quaternary ammonium ion containing polycations complexed with fluorescent rhodamine sulfonic acid dyes

Based on the growing range of applications for polycations in research and commercial materials, a continuing need exists to advance the fundamental knowledge and understanding of this class of materials. Spectroscopic and solution properties characterizations of noncovalently labeled, fluorescent Alexa Fluor® dye complexes of two commercial polycations, poly(2-(trimethylamino) ethyl methacrylate) monocation and poly[bis[2-chloroethyl] ether-alt-1,3-bis[3-(dimethylamino) propyl] urea] dication are reported to help address this need. A variety of fluorescence spectroscopic methods are used with a special emphasis on fluorescence correlation spectroscopy (FCS) which is applied to characterize the Stokes radius (RS) and equilibrium dissociation constants (Kd) of dye-polycation complexes at nanomolar dye concentrations. Resulting RS values indicate dye binding to individual polycation chains. Measured Kd values in the sub-micromolar range are consistent with strong dye binding. Increasing solution ionic strength with sodium chloride addition inhibits dye binding and decreases the RS of dye-polycation complexes due to size collapse of polycation chains. The complexes differ in their solution stability to ionic strength changes suggesting that both electrostatic and hydrophobic binding interactions influence dye binding. This study establishes the viability of noncovalent dye-polycation complexation in concert with FCS characterization as a general approach for investigating the properties of quaternary ammonium ion containing polycations in aqueous solution.

DNA interactive property of poly-L-lysine induces apoptosis in MCF-7 cells through DNA interaction

Poly-L-lysine (PLL) is known to be an encapsulating agent in drug formulation and delivery. PLL also has apoptotic and antiproliferative activities that enable blocking of the tumorigenesis process. However, the dose-selective activities of PLL in exerting apoptosis against cancer are unclear. Therefore, this study has been designed to explore the potential role and dose of PLL in apoptosis, if any. For this, PLL was administered at several doses in cancer cell lines and was found to be more potent against MCF-7 cells. PLL causes mitochondria-mediated apoptotic death through the upregulation of cleaved caspase-3. To investigate the mechanism responsible for this activity, we have analyzed if PLL could have the DNA interactive property or not. For this, molecular docking analysis was carried out to prove whether it has the property to bind with DNA or not. Studies have revealed that PLL is a potent DNA binder and it probably performs such apoptotic activities through the binding of cellular DNA early in an exposure. Simultaneous upregulation of both ROS-mediated stress and also in key protein expressions like γ-H2AX could also help us to confirm that PLL induces apoptosis through DNA interaction. This finding leads us to believe that PLL could play an interfering role with other chemotherapeutic compounds when used as a drug-coating material as it exerts an apoptotic effect on cancer cells, which should be avoided by using a much lower concentration.

Molecular Dynamics of Lysine Dendrigrafts in Methanol-Water Mixtures

The molecular dynamics method was used to study the structure and properties of dendrigrafts of the first and second generations in methanol-water mixtures with various volume fractions of methanol. At a small volume fraction of methanol, the size and other properties of both dendrigrafts are very similar to those in pure water. A decrease in the dielectric constant of the mixed solvent with an increase in the methanol fraction leads to the penetration of counterions into the dendrigrafts and a reduction of the effective charge. This leads to a gradual collapse of dendrigrafts: a decrease in their size, and an increase in the internal density and the number of intramolecular hydrogen bonds inside them. At the same time, the number of solvent molecules inside the dendrigraft and the number of hydrogen bonds between the dendrigraft and the solvent decrease. At small fractions of methanol in the mixture, the dominant secondary structure in both dendrigrafts is an elongated polyproline II (PPII) helix. At intermediate volume fractions of methanol, the proportion of the PPII helix decreases, while the proportion of another elongated β-sheet secondary structure gradually increases. However, at a high fraction of methanol, the proportion of compact α-helix conformations begins to increase, while the proportion of both elongated conformations decreases.

Highly Branched Polymers Based on Poly(amino acid)s for Biomedical Application

Polymers consisting of amino acid building blocks continue to receive consideration for biomedical applications. Since poly(amino acid)s are built from natural amino acids, the same building blocks proteins are made of, they are biocompatible, biodegradable and their degradation products are metabolizable. Some amino acids display a unique asymmetrical AB2 structure, which facilitates their ability to form branched structures. This review compares the three forms of highly branched polymeric structures: structurally highly organized dendrimers, dendrigrafts and the less organized, but readily synthesizable hyperbranched polymers. Their syntheses are reviewed and compared, methods of synthesis modulations are considered and variations on their traditional syntheses are shown. The potential use of highly branched polymers in the realm of biomedical applications is discussed, specifically their applications as delivery vehicles for genes and drugs and their use as antiviral compounds. Of the twenty essential amino acids, L-lysine, L-glutamic acid, and L-aspartic acid are asymmetrical AB2 molecules, but the bulk of the research into highly branched poly(amino acid)s has focused on the polycationic poly(L-lysine) with a lesser extent on poly(L-glutamic acid). Hence, the majority of potential applications lies in delivery systems for nucleic acids and this review examines and compares how these three types of highly branched polymers function as non-viral gene delivery vectors. When considering drug delivery systems, the small size of these highly branched polymers is advantageous for the delivery of inhalable drug. Even though highly branched polymers, in particular dendrimers, have been studied for more than 40 years for the delivery of genes and drugs, they have not translated in large scale into the clinic except for promising antiviral applications that have been commercialized.

Study of Interactions between Antigens and Polymeric Adjuvants in Vaccines by Frontal Analysis Continuous Capillary Electrophoresis

Vaccine adjuvants are used to enhance the immune response induced by antigens that have insufficient immunostimulatory capabilities. The present work aims at developing a frontal analysis continuous capillary electrophoresis (FACCE) methodology for the study of antigen-adjuvant interactions in vaccine products. After method optimization using three cationic model proteins, namely lysozyme, cytochrome c, and ribonuclease A, FACCE was successfully implemented to quantify the free antigen and thus to determine the interaction parameters (stoichiometry and binding constant) between an anionic polymeric adjuvant (polyacrylic acid, SPA09) and a cationic vaccine antigen in development for the treatment for Staphylococcus aureus. The influence of the ionic strength of the medium on the interactions was investigated. A strong dependence of the binding parameters with the ionic strength was observed. The concentration of the polymeric adjuvant was also found to significantly modify the ionic strength of the formulation, the extent of which could be estimated and corrected.

Arginine–glycine–aspartate (RGD)-targeted positron-labeled dendritic polylysine nanoprobe for tumor PET imaging

This work investigated the optimization of the ⁶⁸Ga radiolabeling of the dendritic polylysine-1,4,7-triazacyclononane-1,4,7-triacetic acid conjugate (DGL-NOTA). Under pH = 4.0, reaction temperature of 70 °C, and incubation time of 10.0 min, the conjugate (DGL-NOTA) radiochemical yield was between 50% and 70%. After separation and purification, the radiochemical purity was greater than 98%. The radiolabeled formulation (⁶⁸Ga-NOTA-DGL-PEG-RGDyC) remained stable in both phosphate buffer and serum (all radiochemically greater than 95%) for up to 2 hours with a specific activity of 30 GBq/μmol. Cellular experimental studies have shown that radiolabeled preparations can rapidly enter U87MG cells, and after 2 hours, there was still retention of imaging agents in the cells. In vivo distribution studies had shown that the tracer is excreted by the kidneys. Two hours after injecting the imaging agent, the U87MG tumor tissue uptake value was (4.67 ± 0.09)% ID/g. Positron emission tomography (PET) imaging in animals showed that ⁶⁸Ga-NOTA-DGL-PEG-RGDyC had good targeting and can be enriched in tumor sites. Through hemolysis testing and morphological changes of red blood cells, it was proved that NOTA-DGL-PEG-RGDyC has good blood compatibility.

This work investigated the optimization of the ⁶⁸Ga radiolabeling of the dendritic polylysine-1,4,7-triazacyclononane-1,4,7-triacetic acid conjugate (DGL-NOTA).

Pressure-assisted capillary electrophoresis frontal analysis for faster binding constant determination

Adding external pressure during the process of capillary electrophoresis usually add to the band broadening, especially if the pressure induced flow is significant. The resolution is normally negatively affected in pressure-assisted capillary electrophoresis (PACE). Frontal analysis (FA), however, can potentially benefit from using an external pressure while avoiding the drawbacks in other modes of CE. In this work, possible impact from the external pressure was simulated by COMSOL Multiphysics®. Under a typical CE-FA set-up, it was found that the detected concentrations of analyte will not be significantly affected by an external pressure less than 5 psi. Besides, the measured ligand concentration in PACE-FA was also not affected by common variables (molecular diffusion coefficient (10-8 to 10-11 m2 /s), capillary length etc). To provide an experimental proof, PACE-FA is used to study the binding interactions between hydroxypropyl β-cyclodextrin (HP-β-CD) and small ligand molecules. Taking the HP-β-CD /benzoate pair as an example, the binding constants determined by CE-FA (18.3 ± 0.8 M-1 ) and PACE-FA (16.5 ± 0.5 M-1 ) are found to be similar. Based on the experimental results, it is concluded that PACE-FA can reduce the time of binding analysis while maintaining the accuracy of the measurements.

Effect of Dendrigraft Generation on the Interaction between Anionic Polyelectrolytes and Dendrigraft Poly(l-Lysine)

In this present work, three generations of dendrigraft poly(l-Lysine) (DGL) were studied regarding their ability to interact with linear poly (acrylamide-co-2-acrylamido-2-methyl-1-propanesulfonate) (PAMAMPS) of different chemical charge densities (30% and 100%). Frontal analysis continuous capillary electrophoresis (FACCE) was successfully applied to determine binding constants and binding stoichiometries. The effect of DGL generation on the interaction was evaluated for the first three generations (G2, G3, and G4) at different ionic strengths, and the effect of ligand topology (linear PLL vs. dendrigraft DGL) on binding parameters was evaluated. An increase of the biding site constants accompanied with a decrease of the DGL-PAMAMPS (n:1) stoichiometry was observed for increasing DGL generation. The logarithm of the global binding constants decreased linearly with the logarithm of the ionic strength. This double logarithmic representation allowed determining the extent of counter-ions released from the association of DGL molecules onto one PAMAMPS chain that was compared to the total entropic reservoir constituted by the total number of condensed counter-ions before the association.

Layer-by-layer assembled hydrophobic coatings for cellulose nanofibril films and textiles, made of polylysine and natural wax particles

Herein we present a simple method to render cellulosic materials highly hydrophobic while retaining their breathability and moisture buffering properties, thus allowing for their use as functional textiles. The surfaces are coated via layer-by-layer deposition of two natural components, cationic poly-l-lysine and anionic carnauba wax particles. The combination of multiscale roughness, open film structure, and low surface energy of wax colloids, resulted in long-lasting superhydrophobicity on cotton surface already after two bilayers. Atomic force microscopy, interference microscopy, scanning electron microscopy and X-ray photoelectron spectroscopy were used to decouple structural effects from changes in surface energy. Furthermore, the effect of thermal annealing on the coating was evaluated. The potential of this simple and green approach to enhance the use of natural cellulosic materials is discussed.

Modelling and predicting the interactions between oppositely and variously charged polyelectrolytes by frontal analysis continuous capillary electrophoresis

In this work, a systematic study of the interactions between poly(l-lysine) and variously charged statistical copolymers of acrylamide and 2-acrylamido-2-methyl-1-propanesulfonate (PAMAMPS) has been carried out by frontal analysis continuous capillary electrophoresis (FACCE). FACCE was successfully implemented to obtain the interaction parameters (binding constant and stoichiometry) at different ionic strengths and for different PAMAMPS charge densities varying between 15% and 100%. The range of investigated ionic strengths was carefully adjusted according to the PAMAMPS charge density to obtain measurable binding constants by FACCE (i.e. formation binding constant typically comprised between 10⁴ and 10⁶ M^-1). The number of released counter-ions during the polyelectrolyte complex formation was systematically quantified via the ionic strength dependence of the binding constant and was compared to the total condensed counter-ion reservoir according to Manning theory on counter-ion condensation. A descriptive and predictive model relating the physico-chemical properties of the two partners, the binding constant and the ionic strength is proposed in the framework of multiple independent interaction sites of equal energy.

Evaluation of three neutral capillary coatings for the determination of analyte-cyclodextrin binding constants by affinity capillary electrophoresis. Application to N,N'-disubstituted piperazine derivatives

The performances of three neutral static coatings (hydroxypropyl cellulose, polyethylene oxide and poly(N,N-dimethylacrylamide) have been evaluated in order to determine the binding constants of the complexes formed between four polycationic compounds (piperazine derivatives) and four cyclodextrins of pharmaceutical interest (β-CD, HP-β-CD, Me-β-CD and sulfobutyl ether-β-CD) by affinity capillary electrophoresis. The physically-adsorbed poly(N,N-dimethylacrylamide) coating proves to be the more efficient to mask the silanol groups of the capillary wall since the lowest electroosmotic flow was measured for this coating. Moreover, it drastically reduces the adsorption of the compounds since it allows a correct repeatability of their migration time, higher efficiencies of the peaks and no baseline shift. Then, it was verified for four complexes that this coating allows a correct determination of the binding constants avoiding the CD adsorption which is responsible of an undervaluation of binding constants. The highest binding constants are obtained using the anionic sulfobutyl ether-β-CD (SBE-β-CD). The structure of the complex formed between the tacrine derivative and the SBE-β-CD was further investigated through 2D ROESY NMR experiments and structure-binding constant relationships. Results suggest that the inclusion in the SBE-β-CD cavity occurs through the aliphatic ring portion of the tacrine moiety.

Effect of dendrimer generation on the interactions between human serum albumin and dendrigraft polylysines

This work aims at studying the interaction between human serum albumin and different generations of dendrigraft poly-L-lysine (DGL) in physiological conditions. The binding constants and stoichiometry of the interaction were successfully determined using frontal analysis continuous capillary electrophoresis. The effect of generation on the interaction was evaluated for the five first generations of DGL. An increase of the binding constant accompanied with a decrease of the HSA:DGL (1:n) stoichiometry and a decrease of the cooperativity with dendrimer generation was observed. These findings were in good agreement with the increase of ligand (DGL) size, the increase of electrostatic ligand-ligand repulsion, and the localization of two negatively charged interaction sites on the HSA. The effect of the ligand topology (linear vs dendrigraft) on the HSA interaction revealed that linear poly(L-lysine) leads to much lower stoichiometry compared to DGL of similar molar mass due to much higher flexibility and contour length.

Grafting of poly-L-lysine dendrigrafts onto polypropylene surface using plasma activation for ATP immobilization - Nanomaterial for potential applications in biotechnology

The present work describes a new environmental friendly strategy for the development of surfaces with high amine density via the grafting of native or modified poly-L-lysine dendrigraft (DGL G3) onto plasma activated polypropylene (PP), polystyrene (PS), polyimide, and polytetrafluoroethylene (PTFE) surface. Modified DGL G3 was prepared by replacement of few peripheral amines by various functionalities. Grafting efficiency was determined by wettability measurements, IRTF, XPS, AFM, and by colorimetry using optimized Coomassie Brilliant Blue method tailored for surface analysis. It was shown that a 4-7nm DGL G3 monolayer with 4×10(14)aminecm(-)(2) was covalently grafted onto various surfaces. Immobilization of adenosine triphosphate on the DGL-g-PP material from dilute solution was studied by bioluminescence and proved the ability of the material to interact with polyanionic biological compounds: 1 ATP complex with 5 amine groups. So, this material has a potential use in diagnostic and more widely for biotechnology due to its high capacity for biomolecule immobilization.