Polymer Monoliths with Exchangeable Chemistries: Use of Gold Nanoparticles As Intermediate Ligands for Capillary Columns with Varying Surface Functionalities

Galactose-functionalized methacrylate polymers as affinity sorbents for extraction of food allergen lectins

In this study, glycidyl methacrylate (GMA)-based materials functionalized with different galactose derivatives were prepared to be used as affinity sorbents for solid-phase extraction (SPE) of several food allergen lectins (such as phytohemagglutinin (PHA)). First, GMA-based polymers were synthesized and then galactose derivatives were immobilized onto the GMA surface using two different synthetic routes. In the first approach, the bare polymer was modified with ethylenediamine and glutaraldehyde, and subsequently two galactose derivatives were immobilized. In the second strategy, the starting polymer was modified with cystamine and gold nanoparticles (AuNPs), on which a thiolated galactose derivative was subsequently anchored. The resulting materials were characterized by scanning electron microscopy and used as SPE sorbents for the isolation of PHA (as probe protein) from food matrices. Different SPE parameters (sample pH, eluent solution composition, binding capacity, sample volume, selectivity and reusability) were evaluated. The material that provided the best PHA recovery (98%) was the one obtained in the second approach, being this material successfully applied to the selective extraction of PHA and other similar lectins from different foods (red and lima dried beans, fresh soybeans and biscuits containing soybean protein traces as indicated in their label). After SDS-PAGE of eluates, all samples only exhibited the characteristic PHA band around 30 kDa, suggesting the high potential of the developed material for application in food allergy field.

Universal gold nanoparticle modified hybrid monolithic substrate developed for facile in-column post-functionalization

Organic-inorganic hybrid monolithic columns, due to the comprehensive advantages, have been applied as promising solid-phase separation matrices for pretreatment of complex samples in biomedical and environmental analyses, however, a tremendous time and efforts are cost to optimize the preparation methods of hybrid monolithic columns with different functional groups for various target analytes. Herein, we proposed a strategy to develop basic hybrid monolithic column materials for flexible and facile post-functionalization. Three kinds of single-functionalized (amine, thiol, and carboxyl) and two kinds of bi-functionalized (amine and thiol, and amine and carboxyl) hybrid monolithic columns were immobilized with gold nanoparticles (GNPs) as intermediary bridge to construct the universal substrates. The GNPs adsorption capacities of the five hybrid monoliths were compared through qualitative characterization and quantitative analysis. Thioglycolic acid (TGA) and an aptamer against human α-thrombin were respectively used for further functionalizing the substrates to select the most suitable hybrid monolith for optional post-functionalization. It was reported for the first time that the coverage density of TGA on functionalized monolithic column modified by GNPs was 168.41 nmol μL^-1. Notably, the coverage density (2205.8 pmol μL^-1) of the aptamer decorated on the hybrid monolithic column was significantly higher than most other similar materials in published works. After that, the aptamer functionalized hybrid monolithic column screened out was applied for the solid-phase microextraction of thrombin, which possessed excellent adsorption selectivity in interference experiment. Consequently, the developed GNPs modified amine- and thiol-bi-functionalized hybrid monolithic column is an attractive universal substrate to realize easy and efficient post-modification of separation materials for other target analytes in complex samples avoiding a lot of time and labor consumption in the optimization of process preparation.

Polymeric monolithic microcartridges with gold nanoparticles for the analysis of protein biomarkers by on-line solid-phase extraction capillary electrophoresis-mass spectrometry

In this study, polymeric monoliths with gold nanoparticles (AuNP@monolith) were investigated as microcartridges for the analysis of protein biomarkers by on-line solid-phase extraction capillary electrophoresis-mass spectrometry (SPE-CE-MS). "Plug-and-play" microcartridges (7 mm) were prepared from a glycidyl methacrylate (GMA)-based monolithic capillary column (5 cm x 250 µm i.d.), which was modified with ammonia and subsequently functionalized with gold nanoparticles (AuNPs). The performance of these novel microcartridges was evaluated with human transthyretin (TTR), which is a protein related to different types of familial amyloidotic polyneuropathies (FAP). Protein retention depended on the isoelectric point of the protein (TTR pI~5.4) and elution was achieved with a basic phosphate solution. Under the optimized conditions, limits of detection (LODs) for TTR by AuNP@monolith-SPE-CE-MS were 50 times lower than by CE-MS (5 vs 250 mg•L^-1, with an ion trap (IT) mass spectrometer). The sensitivity enhancement was similar compared to SPE-CE-MS using immunoaffinity (IA) microcartridges with intact antibodies against TTR. Linearity, repeatability in migration times and peak areas, reusability, reproducibility and application to serum samples were also evaluated.

Eco-friendly production of metal nanoparticles immobilised on organic monolith for pepsin extraction

Polymer monoliths modified by using nanoparticles (NPs) integrate high NP specific surface area with different monolith surface chemistry and high porosity. As a result, they have extensive applications within different fields, whereas nanomaterial-functionalised porous polymer monoliths have elicited considerable interest from investigators. This study is aimed at fabricating organic polymer-based monoliths from polybutyl methacrylate-co-ethylenedimethacrylate (BuMA-co-EDMA) monoliths prior to immobilization of gold or silver metal on the pore surface of the monoliths using reducing reagent (extracts of lemon peels). This was intended to denote a sustainable technique of immobilizing nanoparticles that are advantageous over physical and chemical techniques because it is safe in terms of handling, readily available, environmentally friendly, and cheap. Two different methods were used in the study to effectively immobilize nanoparticles on monolithic components. The outcomes showed that soaking the monolith rod in the prepared nano solution directly and placing it within ovens at temperatures of 80°C constituted the most effective method. Characterisation of the fabricated monolith was undertaken using SEM/EDX analysis, UV-vis. spectra analysis, and visual observation. The SEM analysis showed that nanoparticles were extensively immobilised on the surface polymers. Another peak was attained through EDX analysis, thus confirming the Au atom existence at 2.83% alongside another peak that proved the Ag atom existence at 1.92%. The fabricated components were used as sorbents for purifying protein. The ideal performance was achieved using gold nanoparticles (GNPs) immobilised organic monolith that attained a greater pepsin extraction recovery compared to silver nanoparticles (SNPs) immobilised organic monoliths alongside bare organic-based monolith.

Various Strategies in Post-Polymerization Functionalization of Organic Polymer-Based Monoliths Used in Liquid Phase Separation Techniques

This review article is aimed at summarizing the various strategies that have been developed so far for post-polymerization functionalization (PPF) of organic polymer-based monoliths used in liquid phase separation techniques, namely HPLC at all scales and capillary electrochromatography (CEC). The reader will find the organic reactions performed on monolithic columns for grafting the chromatographic ligands needed for solving the separation problems on hand. This process involves therefore the fabrication of template monoliths that carry reactive functional groups to which chromatographic ligands can be covalently attached in a post-polymerization kind of approach. That is, the template monolith that has been optimized in terms of pore structure and other morphology can be readily modified and tailor made on column to fit a particular separation. The review article will not only cover the various strategies developed so far but also describe their separation applications. To the best of our knowledge, this review article will be the first of its kind.

Recent Advances in Capillary Electrochromatography of Proteins and Carbohydrates in the Biopharmaceutical and Biomedical Field

Capillary electrochromatography (CEC) is a powerful hybrid separation technique that combines capillary electrophoresis and capillary chromatography, capable to address the analytical challenges of proteomics and glycomics. The focus of this paper is to review the recent developments in capillary electrochromatography of proteins and carbohydrates. The different column types applied in capillary electrochromatography such as packed bed, open tubular and monoliths are conferred in detail with respective separation examples. A comprehensive comparison is also given listing the mostly utilized coating methods, stationary phase materials and column preparation methods. The choice of porogenic solvent combinations for monolithic column fabrication is thoroughly discussed, paying close attention to the fine tuning options for the separation driving electroosmotic flow. Application examples of CEC in process analytical technology for the biopharmaceutical and biomarker discovery in the biomedical fields are also given.

Challenges and Advances in the Fabrication of Monolithic Bioseparation Materials and their Applications in Proteomics Research

High-performance liquid chromatography integrated with tandem mass spectrometry (HPLC-MS/MS) has become a powerful technique for proteomics research. Its performance heavily depends on the separation efficiency of HPLC, which in turn depends on the chromatographic material. As the "heart" of the HPLC system, the chromatographic material is required to achieve excellent column efficiency and fast analysis. Monolithic materials, fabricated as continuous supports with interconnected skeletal structure and flow-through pores, are regarded as an alternative to particle-packed columns. Such materials are featured with easy preparation, fast mass transfer, high porosity, low back pressure, and miniaturization, and are next-generation separation materials for high-throughput proteins and peptides analysis. Herein, the recent progress regarding the fabrication of various monolithic materials is reviewed. Special emphasis is placed on studies of the fabrication of monolithic capillary columns and their applications in separation of biomolecules by capillary liquid chromatography (cLC). The applications of monolithic materials in the digestion, enrichment, and separation of phosphopeptides and glycopeptides from biological samples are also considered. Finally, advances in comprehensive 2D HPLC separations using monolithic columns are also shown.

Multi-lumen capillary based trypsin micro-reactor for the rapid digestion of proteins

In this work we evaluated a novel microreactor prepared using a surface modified, high surface-to-volume ratio multi-lumen fused silica capillary (MLC). The MLC investigated contained 126 parallel channels, each of 4 μm internal diameter. The MLC, along with conventional fused silica capillaries of 25 μm and 50 μm internal diameter, were treated by (3-aminopropyl)triethoxysilane (APTES) and then modified with gold nanoparticles, of ∼20 nm in diameter, to ultimately provide immobilisation sites for the proteolytic enzyme, trypsin. The modified capillaries and MLCs were characterised and profiled using non-invasive scanning capacitively coupled contactless conductivity detection (sC4D). The sC4D profiles confirmed a significantly higher amount of enzyme was immobilised to the MLC when compared to the fused silica capillaries, attributable to the increased surface to volume ratio. The MLC was used for dynamic protein digestion, where peptide fragments were collected and subjected to off-line chromatographic evaluation. The digestion was achieved with the MLC reactor, using a residence time of just 1.26 min, following which the HPLC peak associated with the intact protein decreased by >70%. The MLC reactors behaved similarly to the classical in vitro or in-solution approach, but provided a reduction in digestion time, and fewer peaks associated with trypsin auto-digestion, which is common using in-solution digestion. The digestion of cytochrome C using both the MLC-IMER and the in-solution approach, resulted in a sequence coverage of ∼80%. The preparation of the MLC microreactor was reproducible with <2.5% RSD between reactors (n = 3) as determined by sC4D.

Monolithic capillary columns consisting of poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) and their diol derivatives with incorporated hydroxyl functionalized multiwalled carbon nanotubes for reversed-phase capillary electrochromatography

Two types of monolithic stationary phases with incorporated hydroxyl functionalized multiwalled carbon nanotubes (OH-MWCNTs) were introduced and evaluated, namely, the poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) monolith, denoted as poly(GMA-co-EDMA), and a diol derivative of the poly(GMA-co-EDMA) monolith. The diol derivative monolith was obtained by subjecting the poly(GMA-co-EDMA) monolith with physically incorporated OH-MWCNTs to an acid treatment with 0.1 M sulfuric acid at a moderate temperature of 50 °C for a total of 7.5 h. Also, the poly(GMA-co-EDMA) monolith with both physically and covalently incorporated OH-MWCNTs was prepared by subjecting the physically incorporated monolithic column to a Lewis acid catalyzed reaction in the presence of BF₃ in order to react some of the OH-MWCNTs with the epoxy rings of the poly(GMA-co-EDMA) monolith. In all cases, the OH-MWCNTs were subjected to high power sonication at an output power of 10 W for 15 min with the aim of better dispersing the incorporated nanotubes into the monoliths under investigation. In fact, high power sonication yielded columns with a relatively higher plate count (∼2 fold increase) when compared to low power sonication. While the incorporation of OH-MWCNTs into the poly(GMA-co-EDMA) monolith acted as an amendment boosting the nonpolar character of the monolith and providing additional π-π interactions, the diol derivative monolith with its polar backbone character acted nearly as a support for the OH-MWCNT stationary phase giving rise to a carbon nanotube sorbent providing hydrophobic and π-π interactions via the incorporated OH-MWCNTs. These two kinds of columns were evaluated using alkylbenzenes, toluene derivatives, aniline compounds, phenols and polyaromatic hydrocarbons.

Organic polymer-based monolithic stationary phases with incorporated nanostructured materials for HPLC and CEC

This review article is concerned with the recent advances made in the field of organic polymer-based monoliths with incorporated nanostructured materials (NSMs) for use in liquid chromatography and capillary electrochromatography. It covers the pertinent literature published over the last 7-8 years with a total of 56 references. The present article has two distinct parts: one major part encompassing "traditional" organic polymer-based monoliths modified with NSMs and a minor part on cryogels modified with NSMs.

Design of five-layer gold nanoparticles self-assembled in a liquid open tubular column for ultrasensitive nano-LC-MS/MS proteomic analysis of 80 living cells

In this work, for the first time, a liquid open tubular column modified by five-layer gold nanoparticles and linked with C₁₈ (GNPs@C₁₈ ) was designed and fabricated for nano-LC-MS/MS analysis of 80 living cells. Sixty nanometer gold nanoparticles were self-assembled layer by layer on the inner wall of a 20 μm id fused-silica capillary. C₁₈ was then linked on the gold nanoparticles to make the liquid open tubular column show hydrophobic character. Enough loading capacities for analysis of 80 living cells, ∼100 fmol for pk-10 and ∼30 fmol for insulin, were obtained with the 2 m × 20 μm id five-layer GNPs@C₁₈ open tubular column. The open tubular column was used in an online pretreatment and direct nano-LC-MS/MS analysis system to analyze 80 living HepG2 cells. In total, 650 proteins were identified in triplicate runs. The subcellular localization of the identified proteins showed that our system had no bias toward different cellular compartments. Protein copy number per cell of the identified proteins showed that the detection limit could reach 50 zmol and the abundance of the identified proteins could cover a dynamic range of 6 orders.

Application of Porous Materials to Carbohydrate Chemistry and Glycoscience

There is a growing interest in using a range of porous materials to meet research needs in carbohydrate chemistry and glycoscience in general. Among the applications of porous materials reviewed in this chapter, enrichment of glycans from biological samples prior to separation and analysis by mass spectrometry is a major emphasis. Porous materials offer high surface area, adjustable pore sizes, and tunable surface chemistry for interacting with glycans, by boronate affinity, hydrophilic interactions, molecular imprinting, and polar interactions. Among the materials covered in this review are mesoporous silica and related materials, porous graphitic carbon, mesoporous carbon, porous polymers, and nanoporous gold. In some applications, glycans are enzymatically or chemically released from glycoproteins or glycopeptides, and the porous materials have the advantage of size selectivity admitting only the glycans into the pores and excluding proteins. Immobilization of lectins onto porous materials of suitable pore size allows for the use of lectin-carbohydrate interactions in capture or separation of glycoproteins. Porous material surfaces modified with carbohydrates can be used for the selective capture of lectins. Controlled release of therapeutics from porous materials mediated by glycans has been reported, and so has therapeutic targeting using carbohydrate-modified porous particles. Additional applications of porous materials in glycoscience include their use in the supported synthesis of oligosaccharides and in the development of biosensors for glycans.

Methacrylate Polymer Monoliths for Separation Applications

This review summarizes the development of methacrylate-based polymer monoliths for separation science applications. An introduction to monoliths is presented, followed by the preparation methods and characteristics specific to methacrylate monoliths. Both traditional chemical based syntheses and emerging additive manufacturing methods are presented along with an analysis of the different types of functional groups, which have been utilized with methacrylate monoliths. The role of methacrylate based porous materials in separation science in industrially important chemical and biological separations are discussed, with particular attention given to the most recent developments and challenges associated with these materials. While these monoliths have been shown to be useful for a wide variety of applications, there is still scope for exerting better control over the porous architectures and chemistries obtained from the different fabrication routes. Conclusions regarding this previous work are drawn and an outlook towards future challenges and potential developments in this vibrant research area are presented. Discussed in particular are the potential of additive manufacturing for the preparation of monolithic structures with pre-defined multi-scale porous morphologies and for the optimization of surface reactive chemistries.

Solid-phase extraction based on ground methacrylate monolith modified with gold nanoparticles for isolation of proteins

In this study, a novel polymeric material functionalized with gold nanoparticles (AuNPs) was prepared as solid-phase extraction (SPE) sorbent for isolation of proteins. The sorbent was synthesized from a powdered poly(glycidyl-co-ethylene dimethacrylate) monolith, and modified with ammonia, followed by immobilization of AuNPs on the pore surface of the material. To evaluate the performance of this SPE support, proteins were selected as test solutes, being the extraction conditions and other parameters (loading capacity and regenerative ability of sorbent) established. The results indicated that this sorbent could be employed to selectively capture proteins according to their pI, on the basis of the strong affinity of these biomacromolecules towards to AuNPs surface. The applicability of this sorbent was demonstrated by isolating protein species of interest (bovine serum albumin, cytochrome c and lectins in European mistletoe leaves), followed by SDS-PAGE analysis.

Gold Nanoparticle@Polyhedral Oligomeric Silsesquioxane Hybrid Scaffolds in Microfluidic Format - Highly Efficient and Green Catalytic Platforms

We report on the preparation of new hybrid organic–inorganic multiporous monolithic capillary columns carrying gold nanoparticles of 5, 10, 50, and 100 nm size and their use as flow‐through catalytic platforms for aqueous liquid‐phase reduction reactions. We found that the flow‐through performance of the reactors depends not only on the size of the gold nanoparticles but also on the interplay of the pore size of the scaffolds and the catalytically available gold surface within the system, that is, loading an increased number of gold nanoparticles of smaller size does not necessarily result in strictly improved performance. This indicates the importance of the interplay between the nanopore size of the scaffolds and the catalytically active gold surface existing within the system. Demonstration of the highly efficient catalytic flow‐through operation within seconds and the repeated use of the reactors without loss of performance indicates their excellent suitability as microfluidic device elements.

Novel in-capillary polymeric monoliths arising from glycerol carbonate methacrylate for flow-through catalytic and chromatographic applications

In-capillary reactive polymer monoliths have been prepared from glycerol carbonate methacrylate functional monomer, suitably functionalized and further applied to separation science and flow-through catalysis, respectively.

Preparation of an aptamer based organic–inorganic hybrid monolithic column with gold nanoparticles as an intermediary for the enrichment of proteins

Gold nanoparticles are used as an intermediary in a sandwich structure for the preparation of an aptamer-based organic–inorganic hybrid affinity monolithic column.

Selective capture of glycoproteins using lectin-modified nanoporous gold monolith

The surface of nanoporous gold (np-Au) monoliths was modified via a flow method with the lectin Concanavalin A (Con A) to develop a substrate for separation and extraction of glycoproteins. Self-assembled monolayers (SAMs) of α-lipoic acid (LA) on the np-Au monoliths were prepared followed by activation of the terminal carboxyl groups to create amine reactive esters that were utilized in the immobilization of Con A. Thermogravimetric analysis (TGA) was used to determine the surface coverages of LA and Con A on np-Au monoliths which were found to be 1.31×10(18) and 1.85×10(15)moleculesm(-2), respectively. An in situ solution depletion method was developed that enabled surface coverage characterization without damaging the substrate and suggesting the possibility of regeneration. Using this method, the surface coverages of LA and Con A were found to be 0.989×10(18) and 1.32×10(15)moleculesm(-2), respectively. The selectivity of the Con A-modified np-Au monolith for the high mannose-containing glycoprotein ovalbumin (OVA) versus negative control non-glycosylated bovine serum albumin (BSA) was demonstrated by the difference in the ratio of the captured molecules to the immobilized Con A molecules, with OVA:Con A=2.3 and BSA:Con A=0.33. Extraction of OVA from a 1:3 mole ratio mixture with BSA was demonstrated by the greater amount of depletion of OVA concentration during the circulation with the developed substrate. A significant amount of captured OVA was eluted using α-methyl mannopyranoside as a competitive ligand. This work is motivated by the need to develop new materials for chromatographic separation and extraction substrates for use in preparative and analytical procedures in glycomics.

On-column enrichment and surface-enhanced Raman scattering detection in nanoparticles functionalized porous capillary monolith

A monolithic column functionalized with gold nanoparticles (GNPs) was designed to provide ultrasensitive detection with surface-enhanced Raman scattering (SERS). The monolithic column based on poly (glycidyl methacrylate-co-ethylene dimethacrylate) (GMA-co-EDMA) was served as the enrichment sorbent to concentrate GNPs and targets. We found that 60 nm GNPs-functionalized monolithic columns demonstrated the best SERS enhancement, and the lowest detectable concentration for PATP and CV could be achieved at 10(-7) and 10(-11) M, respectively. Moreover, the columns exhibit a good reproducibility in both spot-to-spot (∼10%) and batch-to-batch (∼15%). The SERS monolithic column with a high sensitivity and reproducibility has a great potential in the field-based rapid detection of targets in complex real-world samples.