Quasi-Confocal, Multichannel Parallel Scan Hyperspectral Fluorescence Imaging Method Optimized for Analysis of Multicolor Microarrays

Surface Plasmon Resonance Biosensors: A Review of Molecular Imaging with High Spatial Resolution

Surface plasmon resonance (SPR) is a powerful tool for determining molecular interactions quantitatively. SPR imaging (SPRi) further improves the throughput of SPR technology and provides the spatially resolved capability for observing the molecular interaction dynamics in detail. SPRi is becoming more and more popular in biological and chemical sensing and imaging. However, SPRi suffers from low spatial resolution due to the imperfect optical components and delocalized features of propagating surface plasmonic waves along the surface. Diverse kinds of approaches have been developed to improve the spatial resolution of SPRi, which have enormously impelled the development of the methodology and further extended its possible applications. In this minireview, we introduce the mechanisms for building a high-spatial-resolution SPRi system and present its experimental schemes from prism-coupled SPRi and SPR microscopy (SPRM) to surface plasmonic scattering microscopy (SPSM); summarize its exciting applications, including molecular interaction analysis, molecular imaging and profiling, tracking of single entities, and analysis of single cells; and discuss its challenges in recent decade as well as the promising future.

Mapping port wine stain in vivo by optical coherence tomography angiography and multi-metric characterization

Port wine stain (PWS) is a congenital cutaneous capillary malformation composed of ecstatic vessels, while the microstructure of these vessels remains largely unknown. Optical coherence tomography angiography (OCTA) serves as a non-invasive, label-free and high-resolution tool to visualize the 3D tissue microvasculature. However, even as the 3D vessel images of PWS become readily accessible, quantitative analysis algorithms for their organization have mainly remained limited to analysis of 2D images. Especially, 3D orientations of vasculature in PWS have not yet been resolved at a voxel-wise basis. In this study, we employed the inverse signal-to-noise ratio (iSNR)-decorrelation (D) OCTA (ID-OCTA) to acquire 3D blood vessel images in vivo from PWS patients, and used the mean-subtraction method for de-shadowing to correct the tail artifacts. We developed algorithms which mapped blood vessels in spatial-angular hyperspace in a 3D context, and obtained orientation-derived metrics including directional variance and waviness for the characterization of vessel alignment and crimping level, respectively. Combining with thickness and local density measures, our method served as a multi-parametric analysis platform which covered a variety of morphological and organizational characteristics at a voxel-wise basis. We found that blood vessels were thicker, denser and less aligned in lesion skin in contrast to normal skin (symmetrical parts of skin lesions on the cheek), and complementary insights from these metrics led to a classification accuracy of ∼90% in identifying PWS. An improvement in sensitivity of 3D analysis was validated over 2D analysis. Our imaging and analysis system provides a clear picture of the microstructure of blood vessels within PWS tissues, which leads to a better understanding of this capillary malformation disease and facilitates improvements in diagnosis and treatment of PWS.

A low-cost average valence detector for mixed electrolytes in vanadium flow batteries

The decay in capacity has hindered the applications of vanadium redox flow batteries (VFBs), which are promising energy storage devices with many benefits. Mixing positive and negative electrolytes can recover some of the lost capacity but is ineffective towards the increasing average valence of the mixed electrolyte caused by the side reactions. In this study, a low-cost optical average valence detector has been developed to monitor the average valence of the mixed electrolyte in VFBs. We demonstrate experimentally that with the aid of the average valence detector, the capacity of VFBs can be regularly recovered via electrolyte mixing and online electrolysis. This low-cost average valence detector has great potential for recovering the decayed capacities of VFBs in large-scale energy storage stations, which consist of thousands of VFBs.

An optical average valence detector has been developed to enable the capacity recovery of VFBs via electrolyte mixing and online electrolysis.

An ultra-small, multi-point, and multi-color photo-detection system with high sensitivity and high dynamic range

Although multi-point, multi-color fluorescence-detection systems are widely used in various sciences, they would find wider applications if they are miniaturized. Accordingly, an ultra-small, four-emission-point and four-color fluorescence-detection system was developed. Its size (space between emission points and a detection plane) is 15 × 10 × 12 mm, which is three-orders-of-magnitude smaller than that of a conventional system. Fluorescence from four emission points with an interval of 1 mm on the same plane was respectively collimated by four lenses and split into four color fluxes by four dichroic mirrors. Then, a total of sixteen parallel color fluxes were directly input into an image sensor and simultaneously detected. The emission-point plane and the detection plane (the image-sensor surface) were parallel and separated by a distance of only 12 mm. The developed system was applied to four-capillary array electrophoresis and successfully achieved Sanger DNA sequencing. Moreover, compared with a conventional system, the developed system had equivalent high fluorescence-detection sensitivity (lower detection limit of 17 pM dROX) and 1.6-orders-of-magnitude higher dynamic range (4.3 orders of magnitude).

Multi-channel hyperspectral fluorescence detection excited by coupled plasmon-waveguide resonance

We propose in this paper a biosensor scheme based on coupled plasmon-waveguide resonance (CPWR) excited fluorescence spectroscopy. A symmetrical structure that offers higher surface electric field strengths, longer surface propagation lengths and depths is developed to support guided waveguide modes for the efficient excitation of fluorescence. The optimal parameters for the sensor films are theoretically and experimentally investigated, leading to a detection limit of 0.1 nM (for a Cy5 solution). Multiplex analysis possible with the fluorescence detection is further advanced by employing the hyperspectral fluorescence technique to record the full spectra for every pixel on the sample plane. We demonstrate experimentally that highly overlapping fluorescence (Cy5 and Dylight680) can be distinguished and ratios of different emission sources can be determined accurately. This biosensor shows great potential for multiplex detections of fluorescence analytes.

Quantitative detection of well-based DNA array using switchable lanthanide luminescence

In this report a novel wash-free method for multiplexed DNA detection is demonstrated employing target specific probe pairs and switchable lanthanide luminescence technology on a solid-phase array. Four oligonucleotide capture probes, conjugated at 3' to non-luminescent lanthanide ion carrier chelate, were immobilized as a small array on the bottom of a microtiter plate well onto which a mix of corresponding detection probes, conjugated at 5' to a light absorbing antenna ligand, were added. In the presence of complementary target nucleic acid both the spotted capture probe and the liquid-phase detection probe hybridize adjacently on the target. Consequently the two non-luminescent label molecules self-assemble and form a luminescent mixed lanthanide chelate complex. Lanthanide luminescence is thereafter measured without a wash step from the spots by scanning in time-resolved mode. The homogeneous solid-phase array-based method resulted in quantitative detection of synthetic target oligonucleotides with 0.32 nM and 0.60 nM detection limits in a single target and multiplexed assay, respectively, corresponding to 3× SD of the background. Also qualitative detection of PCR-amplified target from Escherichia coli is described.

Line-scanning Raman imaging spectroscopy for detection of fingerprints

Fingerprints are the best form of personal identification for criminal investigation purposes. We present a line-scanning Raman imaging system and use it to detect fingerprints composed of β-carotene and fish oil on different substrates. Although the line-scanning Raman system has been used to map the distribution of materials such as polystyrene spheres and minerals within geological samples, this is the first time to our knowledge that the method is used in imaging fingerprints. Two Raman peaks of β-carotene (501.2, 510.3 nm) are detected and the results demonstrate that both peaks can generate excellent images with little difference between them. The system operates at a spectra resolution of about 0.4 nm and can detect β-carotene signals in petroleum ether solution with the limit of detection of 3.4×10(-9) mol/L. The results show that the line-scanning Raman imaging spectroscopy we have built has a high accuracy and can be used in the detection of latent fingerprints in the future.

Polarization-interferometry-based wavelength-interrogation surface plasmon resonance imager for analysis of microarrays

Polarization interferometry (PI) techniques, which are able to improve surface plasmon resonance (SPR) sensing performance and reduce restrictions on allowable parameters of SPR-supporting metal films, have been experimentally realized only in SPR sensors using monochromatic light as a source. Wavelength-interrogation SPR sensors modulated by PI techniques have not been reported due to the wavelength-sensitive characterization of PI phase compensators. In this work we develop a specially designed rhombic prism for phase compensating which is totally insensitive to wavelength. For the first time we successfully apply PI technique to a wavelength-interrogation SPR imager. This imager is able to offer two-dimensional imaging of the whole array plane. As a result of PI modulation, resolutions of 1.3×10(-6) refractive index unit (RIU) under the normal condition and 3.9×10(-7) RIU under a more time-consuming condition are acquired. The application of this imager was demonstrated by reading microarrays for identification of bacteria, and SPR results were confirmed by means of fluorescence imaging.

Line-monitoring, hyperspectral fluorescence setup for simultaneous multi-analyte biosensing

Conventional fluorescence scanners utilize multiple filters to distinguish different fluorescent labels, and problems arise because of this filter-based mechanism. In this work we propose a line-monitoring, hyperspectral fluorescence technique which is designed and optimized for applications in multi-channel microfluidic systems. In contrast to the filter-based mechanism, which only records fluorescent intensities, the hyperspectral technique records the full spectrum for every point on the sample plane. Multivariate data exploitation is then applied to spectra analysis to determine ratios of different fluorescent labels and eliminate unwanted artifacts. This sensor is designed to monitor multiple fluidic channels simultaneously, providing the potential for multi-analyte biosensing. The detection sensitivity is approximately 0.81 fluors/μm², and this sensor is proved to act with a good homogeneity. Finally, a model experiment of detecting short oligonucleotides has demonstrated the biomedical application of this hyperspectral fluorescence biosensor.