Forensic Science

Orientation of Antibody Modified and Reacted on Carboxy-Functionalized Polystyrene Particle Revealed by Zeta Potential Measurement

The comprehensive understanding of the orientation of antibodies on a solid surface is crucial for affinity-based sensing mechanisms. In this study, we demonstrated that the orientation of primary antibodies modified on carboxy-functionalized polystyrene (PS) particles can be analyzed using zeta potential behavior at different pH based on the combined Gouy-Chapman-Stern model and the acid dissociation of carboxy groups and antibodies. We observed that at low surface concentrations of the primary antibody, a side-on orientation was predominant. However, at higher concentrations (approximately 30000 antibodies per PS particle), the orientation shifted to an end-on type due to steric hindrance. Furthermore, the reaction mechanism of the secondary antibody exhibited pH-dependent behavior. At pH > 7, the zeta potential changes were attributed to the antibody-antibody reaction, whereas at pH < 7, adsorption of secondary antibody onto the PS particle was observed, leading to a change in the orientation of the primary antibody modified on the PS particle to an end-on type. The change in zeta potential due to secondary antibody binding indicated a detection limit of 37000 antibodies per PS particle. As a result, we revealed that the analysis of zeta potential behavior enables the evaluation of antibody orientation and the detection of zeptomole order antibodies. This study represents the first demonstration of this capability. We anticipate that the present concept and results will broaden the quantitative application of zeta potential measurements and have significant implications for research areas, including physical chemistry and analytical chemistry.

Identification of the Remains of an Adult Using DNA from Their Deciduous Teeth as a Reference Sample

In many forensic cases, the identification of human remains is performed by comparing their genetic profile with profiles from reference samples of relatives, usually the parents. Here, we report, for the first time, the identification of the remains of an adult using DNA from the person's deciduous teeth as a reference sample. Fragments of a skeletonized and burned body were found, and a short tandem repeat (STR) profile was obtained. A woman looking for her missing son went to the authorities. When the DNA profile of the woman was compared to a database, a positive match suggested a first-degree kinship with the person to whom the remains belonged. The woman had kept three deciduous molars from her son for more than thirty years. DNA typing of dental pulp was performed. The genetic profiles obtained from the molars and those from the remains coincided in all alleles. The random match probability was 1 in 2.70 × 1021. Thus, the remains were fully identified. In the routine identification of human remains, ambiguous STR results may occur due to the presence of null alleles or other mutational events. In addition, erroneous results can be produced by false matches with close family members or even with people who are completely unrelated to the victim, such that, in some cases, a probability of paternity greater than 99.99% does not necessarily indicate biological paternity. Whenever possible, it is preferable to use reference samples from the putative victim as a source of DNA for identification.

Verification of a loss of heterozygosity at the D8S1179 locus in a paternity case by the MiSeq FGx system

Capillary electrophoresis is widely used to study short tandem repeats (STRs) in forensic genetics. However, next-generation sequencing platforms have become a new strategy for forensic DNA typing. In this study, we report a false four-step STR mutation between an alleged father (AF) and child in a paternity case. A total of 23 autosomal STR loci were evaluated using the Huaxia™ Platinum and Goldeneye™ 20A kits, revealing a single mismatch in D8S1179 between the AF (10/10) and the male child (14/14). Additional Y-STR typing of the AF and child was performed, and the results were consistent with those based on 27 Y-STR loci. To further confirm the experimental results, we sequenced the individuals using the MiSeq FGx system and detected 10/15 unbalanced alleles in the D8S1179 locus of the AF and 14/15 unbalanced alleles in the D8S1179 locus of the child. Sanger sequencing revealed that both the AF and child had the C→G point mutation in the primer binding region of D8S1179 resulting in allelic dropout. Therefore, the verification of STR typing by different sequencing systems is helpful for the interpretation of results in cases of multistep STR mutations.

Zeptomole detection of DNA based on microparticle dissociation from a glass plate in a combined acoustic-gravitational field

In this study, we propose a novel detection principle based on the dissociation of microparticles immobilized on a glass plate through weak hybridization involving 4-6 base pairs (bps) in a combined acoustic-gravitational field. Particle dissociation from the glass plate occurs when the resultant of the acoustic radiation force (F_ac) and the sedimentation force (F_sed) exerted on the particle exceeds the binding force owing to the weak hybridization (F_bind). Because F_ac and F_sed can be controlled by the microparticle density, and F_ac is a function of the applied voltage to the transducer (V), an increase in V induces particle dissociation. The binding of gold nanoparticles (AuNPs) onto silica microparticles (SPs) resulting from the strong hybridization of 20 bps induces an increase in the density of SPs, leading to an increase in F_ac and F_sed; consequently, the voltage V required for dissociation becomes lower than that required without AuNP binding. We demonstrate that the dependence of the binding number of AuNPs per SP on V follows the theoretical prediction. The binding of 7500 AuNPs per SP can be detected as a 10 V change in V. The present approach allows the detection of 2000 DNA molecules involved in the strong hybridization between AuNPs and SP.

Writing sequence identification of seals and signatures in documents using ambient mass spectrometry imaging with chemometric methods

Identifying the writing sequence of seals and signatures in documents is often performed and difficult to resolve in forensic determination. Morphological and physical-chemical analysis methods are often limited by the destructive nature of samples, a high signal response strength and specific materials. Mass spectrometry imaging (MSI) has been used as an alternative method because it can generate molecular images from many surfaces and produce rich chemical information. Herein, we developed a sequence identification method by coupling an air flow-assisted desorption electrospray ionization (AFADESI)-MSI system with a chemometric analysis, which can holistically and directly analyse document samples under ambient, moderate and selectable conditions and maintain the original appearance of the paper documents after sampling. By integrating principal component analysis (PCA) and the partial least squares discriminant analysis (PLS-DA), equivocal point analysis can be objectively performed, where knowing the components of the seal or signature is not necessary to identify the sequence. In total, 28 prepared samples with known sequences and two original blind test samples were analysed. One prepared sample was analysed in negative ionization mode, and other samples were inferred in positive ionization mode. All writing sequences were in accordance with the actual case. The writing sequence of the blind testing of the original samples was correctly identified. This study provided a convenient, objective and quasi-nondestructive method to investigate the sequence differences among equivocal document samples and is promising for providing an alternative method for the sequence identification of seals and signatures in questionable documents.

Development of Electronic Nose for Qualitative and Quantitative Monitoring of Volatile Flammable Liquids

A real-time electric nose (E-nose) with a metal oxide sensor (MOS) array was developed to monitor 5 highly flammable liquids (ethanol, tetrahydrofuran, turpentine, lacquer thinner, and gasoline) in this work. We found that temperature had a significant impact on the test results and temperature control could efficiently improve the performance of our E-nose. The results of our qualitative analysis showed that principal component analysis (PCA) could not efficiently distinguish these samples compared to a back-propagation artificial neural network (BP-ANN) which had a 100% accuracy rate on the test samples. Quantitative analysis was performed by regression analysis and the average errors were 9.1%–18.4%. In addition, through anti-interference training, the E-nose could filter out the potential false alarm caused by mosquito repellent, perfume and hair jelly.

Characterization of sequence variation at 30 autosomal STRs in Chinese Han and Tibetan populations

Massively parallel sequencing (MPS) technologies have the ability to reveal sequence variations within STR alleles as well as their nominal allele lengths, which have traditionally been detected by CE instruments. Recently, Thermo Fisher Scientific has updated the MPS-STR panel, named the Precision ID GlobalFiler next-generation sequencing (NGS) STR Panel version 2, with primers redesigned to add two pentanucleotide tandem repeat loci and profile interpretation supported by the Converge software. Using the Ion Chef System, the Ion S5XL System, and the Converge software, genetic variations were characterized within STR repeat and flanking regions of 30 autosomal STR markers in 115 unrelated individuals from two Chinese population groups (58 Tibetans and 57 Hans). Nineteen STRs demonstrated a relative increase in diversity with the variant sequence alleles compared with those of traditional nominal length alleles. In total, 390 alleles were identified by their sequences compared with 258 alleles that were identified by length. Of these 92 sequence variants found within the STR repeat regions, 40 variants were located in STR flanking regions. Additionally, the agreement of the results with CE data was evaluated, as was the ability of this new MPS panel to analyze case-type (11 samples) and artificially degraded samples (seven samples in triplicate). The results generated from this study illustrate that extensive sequence variation exists in commonly used STR markers in the selected population samples and indicate that this NGS STR panel has the potential to be used as an effective tool for human forensics.

A novel helper qPCR system for platinum detection via Pt-DNA coordination

A novel real-time polymerase chain reaction (qPCR) platform for the simple and robust detection of platinum is described for the first time. Compared with conventional qPCR, a helper template, which is related to the active template for performing qPCR, was introduced in our helper qPCR system. Several guanine (G) bases were introduced in the helper template to obtain a platinum-responsive on/off switch based on G-Pt-G coordination. Because of the helper template, a slight change in platinum concentration would significantly change the signal in the qPCR. This novel helper qPCR technique easily detects platinum with high sensitivity (1 ng/mL) and selectivity over other metal ions. Therefore, it will be a promising technique for the detection of platinum in biomedical and environmental samples.

Analytical Validation of a Portable Mass Spectrometer Featuring Interchangeable, Ambient Ionization Sources for High Throughput Forensic Evidence Screening

Forensic evidentiary backlogs are indicative of the growing need for cost-effective, high-throughput instrumental methods. One such emerging technology that shows high promise in meeting this demand while also allowing on-site forensic investigation is portable mass spectrometric (MS) instrumentation, particularly that which enables the coupling to ambient ionization techniques. While the benefits of rapid, on-site screening of contraband can be anticipated, the inherent legal implications of field-collected data necessitates that the analytical performance of technology employed be commensurate with accepted techniques. To this end, comprehensive analytical validation studies are required before broad incorporation by forensic practitioners can be considered, and are the focus of this work. Pertinent performance characteristics such as throughput, selectivity, accuracy/precision, method robustness, and ruggedness have been investigated. Reliability in the form of false positive/negative response rates is also assessed, examining the effect of variables such as user training and experience level. To provide flexibility toward broad chemical evidence analysis, a suite of rapidly-interchangeable ion sources has been developed and characterized through the analysis of common illicit chemicals and emerging threats like substituted phenethylamines. Graphical Abstract ᅟ.

Visualizing Forensic Publication Impacts and Collaborations: Presenting at a Scientific Venue Leads to Increased Collaborations between Researchers and Information Professionals

The Information Services Office (ISO) of the National Institute of Standards and Technology (NIST) proactively sought out an opportunity to present the findings of a study that showed the impact of NIST's forensic research output to its internal customers and outside researchers. ISO analyzed the impact of NIST's contributions to the peer-reviewed forensic journal literature through citation analysis and network visualizations. The findings of this study were compiled into a poster that was presented during the Forensics@NIST Symposium in December 2014. ISO's study informed the forensic research community where NIST has had some of the greatest scholarly impact. This paper describes the methodology used to assess the impact of NIST's forensic publications and shares the results, outcomes, and impacts of ISO's study and poster presentation. This methodology is adaptable and applicable to other research fields and to other libraries. It has improved the recognition of ISO's capabilities within NIST and resulted in application of the methodology to additional scientific disciplines.

Polymerase chain reaction with nearby primers

DNA analysis of biological specimens containing degraded nucleic acids such as mortal remains, archaeological artefacts, forensic samples etc. has gained more attention in recent years. DNA extracted from these samples is often inapplicable for conventional polymerase chain reaction (PCR), so for its amplification the nearby primers are commonly used. Here we report the data that clarify the features of PCR with nearby and abutting primers. We have shown that the proximity of primers leads to significant reduction of the reaction time and ensures the successful performance of DNA amplification even in the presence of PCR inhibitors. The PCR with abutting primers is usually characterized by the absence of nonspecific amplification products that causes extreme sensitivity with limit of detection on single copy level. The feasibility of PCR with abutting primers was demonstrated on species identification of 100 years old rotten wood.

Identification of accelerants, fuels and post-combustion residues using a colorimetric sensor array

A linear (1 × 36) colorimetric sensor array has been integrated with a pre-oxidation technique for detection and identification of a variety of fuels and post-combustion residues. The pre-oxidation method permits the conversion of fuel vapor into more detectable species and therefore greatly enhances the sensitivity of the sensor array. The pre-oxidation technique used a packed tube of chromic acid on an oxide support and was optimized in terms of the support and concentration. Excellent batch to batch reproducibility was observed for preparation and use of the disposable pre-oxidation tubes. Twenty automotive fuels including gasolines and diesel from five gasoline retailers were individually identifiable with no confusions or misclassifications in quintuplicate trials. Limits of detection were at sub-ppm concentrations for gasoline and diesel fuels. In addition, burning tests were performed on commonly used fire accelerants, and clear differentiation was achieved among both the fuels themselves and their volatile residues after burning.

U.S. initiatives to strengthen forensic science & international standards in forensic DNA

A number of initiatives are underway in the United States in response to the 2009 critique of forensic science by a National Academy of Sciences committee. This article provides a broad review of activities including efforts of the White House National Science and Technology Council Subcommittee on Forensic Science and a partnership between the Department of Justice (DOJ) and the National Institute of Standards and Technology (NIST) to create the National Commission on Forensic Science and the Organization of Scientific Area Committees. These initiatives are seeking to improve policies and practices of forensic science. Efforts to fund research activities and aid technology transition and training in forensic science are also covered. The second portion of the article reviews standards in place or in development around the world for forensic DNA. Documentary standards are used to help define written procedures to perform testing. Physical standards serve as reference materials for calibration and traceability purposes when testing is performed. Both documentary and physical standards enable reliable data comparison, and standard data formats and common markers or testing regions are crucial for effective data sharing. Core DNA markers provide a common framework and currency for constructing DNA databases with compatible data. Recent developments in expanding core DNA markers in Europe and the United States are discussed.

Forensic Mass Spectrometry

Developments in forensic mass spectrometry tend to follow, rather than lead, the developments in other disciplines. Examples of techniques having forensic potential born independently of forensic applications include ambient ionization, imaging mass spectrometry, isotope ratio mass spectrometry, portable mass spectrometers, and hyphenated chromatography-mass spectrometry instruments, to name a few. Forensic science has the potential to benefit enormously from developments that are funded by other means, if only the infrastructure and personnel existed to adopt, validate, and implement the new technologies into casework. Perhaps one unique area in which forensic science is at the cutting edge is in the area of chemometrics and the determination of likelihood ratios for the evaluation of the weight of evidence. Such statistical techniques have been developed most extensively for ignitable-liquid residue analyses and isotope ratio analysis. This review attempts to capture the trends, motivating forces, and likely impact of developing areas of forensic mass spectrometry, with the caveat that none of this research is likely to have any real impact in the forensic community unless: (a) The instruments developed are turned into robust black boxes with red and green lights for positives and negatives, respectively, or (b) there are PhD graduates in the workforce who can help adopt these sophisticated techniques.

Electrochemical detection of synthetic DNA and native 16S rRNA fragments on a microarray using a biotinylated intercalator as coupling site for an enzyme label

The direct electrochemical detection of synthetic DNA and native 16S rRNA fragments isolated from Escherichia coli is described. Oligonucleotides are detected via selective post-labeling of double stranded DNA and DNA-RNA duplexes with a biotinylated intercalator that enables high-specific binding of a streptavidin/alkaline phosphatase conjugate. The alkaline phosphatase catalyzes formation of p-aminophenol that is subsequently oxidized at the underlying gold electrode and hence enables the detection of complementary hybridization of the DNA capture strands due to the enzymatic signal amplification. The hybridization assay was performed on microarrays consisting of 32 individually addressable gold microelectrodes. Synthetic DNA strands with sequences representing six different pathogens which are important for the diagnosis of urinary tract infections could be detected at concentrations of 60 nM. Native 16S rRNA isolated from the different pathogens could be detected at a concentration of 30 fM. Optimization of the sensing surface is described and influences on the assay performance are discussed.

Construction of a library of cloned short tandem repeat (STR) alleles as universal templates for allelic ladder preparation

Short tandem repeat (STR) genotyping methods are widely used for human identity testing applications, including forensic DNA analysis. Samples of DNA containing the length-variant STR alleles are typically separated and genotyped by comparison to an allelic ladder. Here, we describe a newly devised library of cloned STR alleles. The library covers alleles X and Y for the sex-determining locus Amelogenin and 259 other alleles for 22 autosomal STR loci (TPOX, D3S1358, FGA, D5S818, CSF1PO, D7S820, D8S1179, TH01, vWA, D13S317, D16S539, D18S51, D21S11, D2S1338, D6S1043, D12S391, Penta E, D19S433, D11S4463, D17S974, D3S4529 and D12ATA63). New primers were designed for all these loci to construct recombinant plasmids so that the library retains core repeat elements of STR as well as 5'- and 3'-flanking sequences of ∼500 base pairs. Since amplicons of commercial STR genotyping kits and systems developed in laboratories are usually distributed from 50 to <500 base pairs, this library could provide universal templates for allelic ladder preparation. We prepared three different sets of allelic ladders for this locus TH01 and an updated version of an allelic ladder for the DNATyper(®)19 multiplex system using these plasmids to confirm the suitability of the library as a good source for allelic ladder preparation. Importantly, the authenticity of each construct was confirmed by bidirectional nucleotide sequencing and we report the repeat structures of the 259 STR alleles. The sequencing results showed all repeat structures we obtained for TPOX, CSF1PO, D7S820, TH01, D16S539, D18S51 and Penta E were the same as reported. However, we identified 102 unreported repeat structures from the other 15 STR loci, supplementing our current knowledge of repeat structures and leading to further understanding of these widely used loci.

Biosensors in forensic analysis. A review

Forensic analysis is an important branch of modern Analytical Chemistry with many legal and socially relevant implications. Biosensors can play an important role as efficient tools in this field considering their well known advantages of sensitivity, selectivity, easy functioning, affordability and capability of miniaturization and automation. This article reviews the latest advances in the use of biosensors for forensic analysis. The different methodologies for the transduction of the produced biological events are considered and the applications to forensic toxicological analysis, classified by the nature of the target analytes, as well as those related with chemical and biological weapons critically commented. The article provides several Tables where the more relevant analytical characteristics of the selected reported methods are gathered.

Microsample analyses via DBS: challenges and opportunities

The use of DBS is an appealing approach to employing microsampling techniques for the bioanalysis of samples, as has been demonstrated for the past 50 years in the metabolic screening of metabolites and diseases. In addition to its minimally invasive sample collection procedures and its economical merits, DBS microsampling benefits from the very high sensitivity, selectivity and multianalyte capabilities of LC–MS, which has been especially well demonstrated in newborn screening applications. Only a few microliters of a biological fluid are required for analysis, which also translates to significantly reduced demands on clinical samples from patients or from animals. Recently, the pharmaceutical industry and other arenas have begun to explore the utility and practicality of DBS microsampling. This review discusses the basis for why DBS techniques are likely to be part of the future, as well as offering insights into where these benefits may be realized.

Determining the fibrillar orientation of bast fibres with polarized light microscopy: the modified Herzog test (red plate test) explained

The identification of bast fibre samples, in particular, bast fibres used in textiles, is an important issue in archaeology, criminology and other scientific fields. One of the characteristic features of bast fibres is their fibrillar orientation, referred to as Z- or S twist (or alternatively right- and left-handed fibres). An empirical test for determining the fibrillar orientation using polarized light microscopy has been known in the community for many years. It is referred to as the modified Herzog test or red plate test. The test has the reputation for never producing false results, but also for occasionally not working. However, so far, no proper justification has been provided in the literature that the 'no false results' assumption is really correct and it has also not been clear up till now, why the method sometimes does not work. In this paper, we present an analytical model for the modified Herzog test, which explains why the test never gives a false result. We also provide an explanation for why the Herzog test sometimes does not work: According to our model, the Herzog test will not work if none of the three distinct layers in the secondary cell wall is significantly thicker than the others.