Detailed Electrochemical Analysis of the Redox Chemistry of Tetrafluorotetracyanoquinodimethane TCNQF4, the Radical Anion [TCNQF4]•–, and the Dianion [TCNQF4]2– in the Presence of Trifluoroacetic Acid

The role of molecular oxygen (O2) and UV light in the anion radical formation and stability of TCNQ and its fluorinated derivatives

We report the electronic absorption spectroscopy of 7,7,8,8-tetracyanoquinodimethane (TCNQ) and its fluorinated derivatives (F2TCNQ and F4TCNQ), well-known electron-accepting molecules in common organic solvents (toluene, chlorobenzene, acetonitrile, and ethanol) under controlled exposure to air (O2) and UV light. All compounds (FxTCNQ (x = 0, 2, 4)) were stable in a neutral state (FxTCNQ0) in toluene and chlorobenzene, even under both O2 and UV light. On the other hand, in EtOH, the formation of FxTCNQ·− was monitored upon controlled exposure to O2 or UV light. Especially in air-equilibrated ethanol upon the UV-illumination, efficient α,α-dicyano-p-toluoylcyanide anion (DCTC−) and its fluorinated derivatives were generated evinced by the absorption peak near 480 nm, whereas the reaction was shut off by removing O2 or blocking UV light, thereby keeping FxTCNQ·− stable. However, even in deaerated ethanol, upon the UV-illumination, the anion formation of TCNQ and its fluorinated derivatives (FxTCNQ·−, x = 0, 2, 4) was inevitable, showing the stability of FxTCNQ0 depends on the choice of solvent.

Visible-light driven water oxidation and oxygen production at soft interfaces

The visible light driven water oxidation reaction (WOR) by the organic electron acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyano-quinodimethane (TCNQF₄) was studied at the water|butyronitrile interface. The WOR was performed at neutral pH, and without any metal or organometallic catalysts. The oxygen generated was measured by GC-MS and cyclic voltammetry, and the protons produced were monitored by measuring the aqueous pH. This work opens novel perspectives for water photo-oxidation in liquids and artificial photosynthesis.

Tuning Organic Electrochemical Transistor (OECT) Transconductance toward Zero Gate Voltage in the Faradaic Mode

In this work, we investigate material design criteria for low-powered/self-powered and efficient organic electrochemical transistors (OECTs) to be operated in the faradaic mode (detection at the gate electrode occurs via electron transfer events). To rationalize device design principles, we adopt a Marcus-Gerischer perspective for electrochemical processes at both the gate and channel interfaces. This perspective considers density of states (DOS) for the semiconductor channel, the gate electrode, and the electrolyte. We complement our approach with energy band offsets of relevant electrochemical potentials that can be independently measured from transistor geometry using conventional electrochemical methods as well as an approach to measure electrolyte potential in an operating OECT. By systematically changing the relative redox property offsets between the redox-active electrolyte and semiconducting polymer channel, we demonstrate a first-order design principle that necessary gate voltage is minimized by good DOS overlap of the two redox processes at the gate and channel. Specifically, for p-type turn-on OECTs, the voltage-dependent, electrochemically active semiconductor DOS should overlap with the oxidant form of the electrolyte to minimize the onset voltage for transconductance. A special case where the electrolyte can be used to spontaneously dope the polymer via charge transfer is also considered. Collectively, our results provide material design pathways toward the development of simple, robust, power-saving, and high-throughput OECT biosensors.

Increased Crystallization of CuTCNQ in Water/DMSO Bisolvent for Enhanced Redox Catalysis

Controlling the kinetics of CuTCNQ (TCNQ = 7,7,8,8-tetracyanoquinodimethane) crystallization has been a major challenge, as CuTCNQ crystallizing on Cu foil during synthesis in conventional solvents such as acetonitrile simultaneously dissolves into the reaction medium. In this work, we address this challenge by using water as a universal co-solvent to control the kinetics of crystallization and growth of phase I CuTCNQ. Water increases the dielectric constant of the reaction medium, shifting the equilibrium toward CuTCNQ crystallization while concomitantly decreasing the dissolution of CuTCNQ. This allows more CuTCNQ to be controllably crystallized on the surface of the Cu foil. Different sizes of CuTCNQ crystals formed on Cu foil under different water/DMSO admixtures influence the solvophilicity of these materials. This has important implications in their catalytic performance, as water-induced changes in the surface properties of these materials can make them highly hydrophilic, which allows the CuTCNQ to act as an efficient catalyst as it brings the aqueous reactants in close vicinity of the catalyst. Evidently, the CuTCNQ synthesized in 30% (v/v) water/DMSO showed superior catalytic activity for ferricyanide reduction with 95% completion achieved within a few minutes in contrast to CuTCNQ synthesized in DMSO that took over 92 min.

Thermally Induced Formation of HF4TCNQ- in F4TCNQ-Doped Regioregular P3HT

The prototypical system for understanding doping in solution-processed organic electronics has been poly(3-hexylthiophene) (P3HT) p-doped with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄TCNQ). Multiple charge-transfer states, defined by the fraction of electron transfer to F₄TCNQ, are known to coexist and are dependent on polymer molecular weight, crystallinity, and processing. Less well-understood is the loss of conductivity after thermal annealing of these materials. Specifically, in thermoelectrics, F₄TCNQ-doped regioregular (rr) P3HT exhibits significant conductivity losses at temperatures lower than other thiophene-based polymers. Through detailed spectroscopic investigation of progressively heated P3HT films coprocessed with F₄TCNQ, we demonstrate that this diminished conductivity is due to formation of the nonchromophoric, weak dopant HF₄TCNQ^-. This species is likely formed through hydrogen abstraction from the α aliphatic carbon of the hexyl chain at the 3-position of thiophene rings of rr-P3HT. This reaction is eliminated for polymers with ethylene glycol-containing side chains, which retain conductivity at higher operating temperatures. In total, these results provide a critical materials design guideline for organic electronics.

FTIR Spectroelectrochemistry of F4TCNQ Reduction Products and Their Protonated Forms

The tetrafluorinated derivative of 7,7,8,8-tetracyanoquinodimethane (TCNQ), 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ), is of interest for charge transfer complex formation and as a p-dopant in organic electronic materials. Fourier transform infrared (FTIR) spectroscopy is commonly employed to understand the redox properties of F4TCNQ in the matrix of interest; specifically, the ν(C≡N) region of the F4TCNQ spectrum is exquisitely sensitive to the nature of the charge transfer between F4TCNQ and its matrix. However, little work has been done to understand how these vibrational modes change in the presence of possible acid/base chemistry. Here, FTIR spectroelectrochemistry is coupled with density functional theory spectral simulation for study of the electrochemically generated F4TCNQ radical anion and dianion species and their protonation products with acids. Vibrational modes of HF4TCNQ^-, formed by proton-coupled electron transfer, are identified, and we demonstrate that this species is readily formed by strong acids, such as trifluoroacetic acid, and to a lesser extent, by weak acids, such as water. The implications of this chemistry for use of F4TCNQ as a p-dopant in organic electronic materials is discussed.

Dopant-Induced Ordering of Amorphous Regions in Regiorandom P3HT

Despite the fact that molecular doping of semiconducting polymers has emerged as a valuable strategy for improving the performance of organic electronic devices, the fundamental dopant-polymer interactions are not fully understood. Here we use 2-D grazing incidence wide-angle X-ray scattering (GIWAXS) to demonstrate that adding oxidizing small-molecule dopants, such as 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄TCNQ) and FeCl₃, into the amorphous conjugated polymer, regiorandom poly(3-hexylthiophene-2,5-diyl) (RRa-P3HT), improves polymer ordering and induces a change in domain orientation from isotropic to mostly edge-on. Doping thus causes RRa-P3HT to behave similarly to the more ordered regioregular P3HT. By comparing the optical, electrical, and structural properties of RRa-P3HT films doped with F₄TNCQ and FeCl₃ and those infiltrated with 7,7,8,8-tetracyanoquinodimethane (TCNQ), which occupies a similar volume as F₄TCNQ but does not dope RRa-P3HT, we show that the increased ordering results not from the ability of the dopant to fill space but instead from the need to delocalize charge on the polymer in more than one dimension.

X4TCNQ2− dianions: versatile building blocks for supramolecular systems

A new synthetic approach has led to the incorporation of TCNQ and F₄TCNQ dianions into a wide variety of structures.