Immobilization of a human epidermal growth factor receptor 2 mimotope-derived synthetic peptide on Au and its potential application for detection of herceptin in human serum by quartz crystal microbalance

Site-Directed Electrochemical Grafting for Amplified Detection of Antibody Pharmaceuticals

Antibody pharmaceuticals have become the most popular immunotherapeutic drugs and are often administered with low serum drug dosages. Hence, the development of a highly sensitive method for the quantitative assay of antibody levels is of great importance to individualized therapy. On the basis of the dual signal amplification by the glycan-initiated site-directed electrochemical grafting of polymer chains (glyGPC), we report herein a novel strategy for the amplified electrochemical detection of antibody pharmaceuticals. The target of interest was affinity captured by a DNA aptamer ligand, and then the glycans of antibody pharmaceuticals were decorated with the alkyl halide initiators (AHIs) via boronate cross-linking, followed by the electrochemical grafting of the ferrocenyl polymer chains from the glycans of antibody pharmaceuticals through the electrochemically controlled atom transfer radical polymerization (eATRP). As the glycans can be decorated with multiple AHIs and the grafted polymer chains are composed of tens to hundreds of electroactive tags, the glyGPC-based strategy permits the dually amplified electrochemical detection of antibody pharmaceuticals. In the presence of trastuzumab (Herceptin) as the target, the glyGPC-based strategy achieved a detection limit of 71.5 pg/mL. Moreover, the developed method is highly selective, and the results of the quantitative assay of trastuzumab levels in human serum are satisfactory. Owing to its uncomplicated operation and cost-effectiveness, the glyGPC-based strategy shows great promise in the amplified electrochemical detection of antibody pharmaceuticals.

Amplification-Free Ratiometric Electrochemical Aptasensor for Point-of-Care Detection of Therapeutic Monoclonal Antibodies

The rapid quantification of therapeutic monoclonal antibodies (mAbs) is of great significance to their pharmacokinetics/pharmacodynamics (PK/PD) research and the personalized medication for disease treatment. Taking advantage of the direct decoration of tens of redox tags to the target of interest, we illustrate herein an amplification-free ratiometric electrochemical aptasensor for the point-of-care (POC) detection of trace amounts of therapeutic mAbs. The POC detection of therapeutic mAbs involved the use of the methylene blue (MB)-conjugated aptamer as the affinity element and the decoration of therapeutic mAbs with ferrocene (Fc) tags via the boronate crosslinking, in which the MB-derived peak current was used as the reference signal, and the peak current of the Fc tag was used as the output signal. As each therapeutic mAb carries tens of diol sites for the site-specific decoration of the Fc output tags, the boronate crosslinking enabled the amplification-free detection, which is cost-effective and quite simple in operation. In the presence of bevacizumab (BevMab) as the target, the resulting ratiometric signal (i.e., the IFc/IMB value) exhibited a good linear response over the range of 0.025-2.5 μg/mL, and the limit of detection (LOD) of the electrochemical aptasensor was 6.5 ng/mL. Results indicated that the aptamer-based affinity recognition endowed the detection of therapeutic mAbs with high selectivity, while the ratiometric readout exhibited satisfactory reproducibility and robustness. Moreover, the ratiometric electrochemical aptasensor is applicable to the detection of therapeutic mAbs in serum samples. Taking together, the amplification-free ratiometric electrochemical aptasensor holds great promise in the POC detection of therapeutic mAbs.

Liquid crystal-assisted optical biosensor for early-stage diagnosis of mammary glands using HER-2

Breast cancer (BC) is one of the most commonly diagnosed cancers and the second leading cause of cancer mortality among women around the world. The purpose of this study is to present a non-labeled liquid crystal (LC) biosensor, based on the inherent feature of nematic LCs, for the evaluation of BC using the human epidermal growth factor receptor-2 (HER-2) biomarker. The mechanism of this sensing is supported by surface modification with dimethyloctadecyl [3-(trimethoxysilyl) propyl] ammonium chloride (DMOAP) encouraging the long alkyl chains that induce a homeotropic orientation of the LC molecules at the interface. To enhance the binding efficacy of more HER-2 antibody (Ab) on LC aligning agents, a simple ultraviolet radiation-assisted method was also used to increase functional groups on the DMOAP coated slides, thereby improving binding affinity and efficiency onto HER-2 Abs. The designed biosensor makes use of the specific binding of HER-2 protein to HER-2 Ab and disruption of the orientation of LCs. This orientation change leads to a transition of the optical appearance from dark to birefringent, enabling the detection of HER-2. This novel biosensor exhibits a linear optical response to HER-2 concentration in the wide dynamic range of 10^-6-10² ng/mL, with an ultra-low detection limit of 1 fg/mL. As a proof of concept, the designed LC biosensor was successfully investigated for the quantification of HER-2 protein in patients suffering from BC. Owing to the sensitivity, selectivity, and label-free detection, this biosensor may amplify the application of LC-based biosensors for the detection of most types of cancers.

Recent advances in biosensor devices for HER-2 cancer biomarker detection

The human epidermal growth factor receptor 2 (HER-2) protein is a member of the epidermal growth factor receptor (EGFR or ErbB) family and is a transmembrane tyrosine kinase receptor. HER-2 is highly regulated in ovarian, lung, gastric, oral, and breast cancers. The low specificity, complexity, expensiveness and the lack of sensitivity are essential restrictions in traditional diagnosis methods such as FISH, immunohistochemistry and PCR and these disadvantages led to the need for more studies on alternative methods. Biosensor technology has greatly affected the quality of human life owing to its features including, sensitivity, specificity, and rapid diagnosis and monitoring of different patient diseases. In this review article, we examine various biosensors, considering that they have been categorized based on the transducers used including piezoelectric biosensors, optical sensors such as fluorescence and surface plasmon resonance, and electrochemical types for the diagnosis of HER-2 and the effectiveness of some drugs against that. Attention to developing some types of biosensor devices such as colorimetric biosensors for HER-2 detection can be an important point in future studies.

Quantitation of Trastuzumab and an Antibody to SARS-CoV-2 in Minutes Using Affinity Membranes in 96-Well Plates

Quantitation of therapeutic monoclonal antibodies (mAbs) in human serum could ensure that patients have adequate levels of mAbs for effective treatment. This research describes the use of affinity, glass-fiber membranes in a 96-well-plate format for rapid (<5 min) quantitation of the therapeutic mAb trastuzumab and a mAb against the SARS-CoV-2 spike protein. Adsorption of a poly(acrylic acid)-containing film in membrane pores and activation of the -COOH groups in the film enable covalent-linking of affinity peptides or proteins to the membrane. Passage of mAb-containing serum through the affinity membrane results in mAb capture within 1 min. Subsequent rinsing, binding of a secondary antibody conjugated to a fluorophore, and a second rinse yield mAb-concentration-dependent fluorescence intensities in the wells. Calibration curves established from analyses on different days have low variability and allow determination of mAb levels in separately prepared samples with an average error <10%, although errors in single-replicate measurements may reach 40%. The assays can occur in diluted serum with physiologically relevant mAb concentrations, as well as in undiluted serum. Thus, the combination of 96-well plates containing affinity membranes, a microplate reader, and a simple vacuum manifold affords convenient mAb quantitation in <5 min.

Epitope mapping from Mycobacterium leprae proteins: Convergent data from in silico and in vitro approaches for serodiagnosis of leprosy

Knowledge of immunodominant B-cell epitopes is essential to design powerful diagnostic strategies aiming for antibody detection. Outstanding progress in computational prediction has achieved a significant contribution to the biomedical fields, including immunodiagnosis. In silico analysis may have an even more important role when information concerning antigens from etiologic agents of neglected diseases, such as leprosy, is scarce. The aim of this study was to provide mapping of B-cell epitopes from two Mycobacterium leprae-derived antigens (Ag85B and ML2055), confirm their antigenicity, and to assess the ability of in silico immunoinformatics tools to accurately predict them. Linear B-cell epitopes predicted by ABCpred and SVMTrip servers were compared to antigenic regions of synthetic overlapping peptides that exhibited reactivity to antibodies from patients with leprosy. Our in vitro results identified several immunodominant regions that had also been indicated by in silico prediction, providing agreement between experimental and simulated data. After chemical synthesis, we used enzyme-linked immunosorbent assays to determine the effectiveness of the first identified sequence (GTNVPAEFLENFVHG) which had 72 % sensitivity and 78 % specificity (AUC = 0.79) while the second one (PVSSEAQPGDPNAPS) had 72 % sensitivity and 93.8 % specificity (AUC = 0.85). Using dot blotting, an easy-to-read visual test, both peptides could distinguish sera from patients with leprosy from those with tuberculosis and from sera of healthy volunteers. Our findings suggest that these synthetic peptides, with some refinement, may be useful as serological diagnostic antigens for leprosy. In addition, it was displayed that immunoinformatics provides reliable information for mapping potential B-cell epitopes for development of peptide-based diagnostic assays for neglected diseases.

Determination of the Serum Concentrations of the Monoclonal Antibodies Bevacizumab, Rituximab, and Panitumumab Using Porous Membranes Containing Immobilized Peptide Mimotopes

Effective monoclonal antibody (mAb) therapies require a threshold mAb concentration in patient serum. Moreover, the serum concentration of the mAb Bevacizumab should reside in a specific range to avoid side effects. Methods for conveniently determining the levels of mAbs in patient sera could allow for personalized dosage schedules that lead to more successful treatments. This work utilizes microporous nylon membranes functionalized with antibody-binding peptides to capture Bevacizumab, Rituximab, or Panitumumab from diluted (25%) serum. Modification of the capture-peptide terminus is often crucial to creating the affinity necessary for effective binding. The high purity of eluted mAbs allows for their quantitation using native fluorescence, and membranes are effective in spin devices that can be used in any laboratory. The technique is effective over the therapeutic range of Bevacizumab concentrations. Future work aims at further modifications to develop rapid point-of-care devices and decrease detection limits.

Fabrication and evaluation of a label-free piezoelectric immunosensor for sensitive and selective detection of amantadine in foods of animal origin

A label-free piezoelectric immunosensor was fabricated and applied to the detection of the antiviral drug amantadine (AM) in foods of animal origin. Experimental parameters associated with the fabrication and measurement process were optimized and are discussed here in detail. The proposed piezoelectric sensor is based on an immunosuppression format and uses a portable quartz crystal microbalance (QCM) chip. It was found to provide a good response to AM, with a sensitivity and limit of detection (LOD) of 33.9 and 1.3 ng mL^-1, respectively, as well as low cross-reactivity (CR, < 0.01%) with AM analogues. The immunosensor was further applied to quantify AM at three levels in spiked samples of typical foods of animal origin, and yielded recoveries of 83.2-93.4% and standard deviations (SDs, n = 3) of 2.4-4.5%, which are comparable to the results (recoveries: 82.6-94.3%; SDs: 1.7-4.2%) obtained using a high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) method. Furthermore, the piezoelectric immunosensing chip can be regenerated multiple (at least 20) times with low signal attenuation (about 10%). A sample analysis can be completed within 50 min (sample pretreatment: about 40 min, QCM measurement: 5 min). These results demonstrate that the developed piezoelectric immunosensor provides a sensitive, accurate, portable, and low-cost analytical strategy for the antiviral drug AM in foods of animal origin, and this label-free detection method could also be applied to analyze other targets in the field of food safety. Graphical abstract.

General Signal Amplification Strategy for Nonfaradic Impedimetric Sensing: Trastuzumab Detection Employing a Peptide Immunosensor

A label-free and reagent-free peptide mimotope capacitive biosensor has been developed for cancer drug (trastuzumab) quantification based on nonfaradic readout. The low sensitivity issue of capacitive biosensors was overcome with two innovations: peptide mimotope mixed self-assembled monolayer (SAM) biointerface and dilution of the analysis buffer. Signal amplification was achieved through dilution of phosphate-buffered saline (PBS) to tune C_dl to dominate the overall capacitance change upon target binding, which contribution is often negligible without dilution. After 1000× dilution, the limit of detection was lowered 500-fold (0.22 μg/mL) and the sensitivity was increased 20-fold [0.04192 (μg/mL)^-1] in comparison with undiluted PBS. The proposed signal amplification strategy is more straightforward and practical compared to biorecognition element engineering and other strategies. The proposed method was further applied to planar electrodes for optimizing sensing response time to less than 1 min.

Ionic Strength, Surface Charge, and Packing Density Effects on the Properties of Peptide Self-Assembled Monolayers

The various environmental parameters of packing density, ionic strength, and solution charge were examined for their effects on the properties of the immobilized peptide mimotope CH19 (CGSGSGSQLGPYELWELSH) that binds with the therapeutic antibody Trastuzumab (Herceptin) on a gold substrate. The immobilization of CH19 onto gold was examined with a quartz crystal microbalance (QCM). The QCM data showed the presence of intermolecular interactions resulting in the increase of viscoelastic properties of the peptide self-assembled monolayer (SAM). The CH19 SAM was diluted with CS7 (CGSGSGS) to decrease the packing density as CH19/CS7. The packing density and ionic strength parameters were evaluated by atomic force microscopy (AFM), ellipsometry, and QCM. AFM and ellipsometry showed a distinct conformational difference between CH19 and CH19/CS7, indicating a relationship between packing density and conformational state of the immobilized peptide. The CH19 SAM thickness was 40 Å with a rough topology, while the CH19/CS7 SAM thickness was 20 Å with a smooth topology. The affinity studies showed that the affinity of CH19 and CH19/CS7 to Trastuzumab were both on the order of 10⁷ M^-1 in undiluted PBS buffer, while the dilution of the buffer by 1000× increased both SAMs affinities to Trastuzumab to the order of 10¹⁵ M^-2 and changed the binding behavior from noncooperative to cooperative binding. This indicated that ionic strength had a more pronounced effect on binding properties of the CH19 SAM than packing density. Electrochemical impedance spectroscopy (EIS) was conducted on the CH19/CS7 SAM, which showed an increase in impedance after each EIS measurement cycle. Cyclic voltammetry on the CH19/CS7 SAM decreased impedance to near initial values. The impact of the packing density, buffer ionic strength, and local charge perturbation of the peptide SAM properties was interpreted based on the titratable sites in CH19 that could participate in the proton transfer and water equilibrium.

Characterization of Self-Assembled Monolayers of Peptide Mimotopes of CD20 Antigen and Their Binding with Rituximab

CD20, expressed in greater than 90% of B-lymphocytic lymphomas, is a target for antibody therapy. Rituximab is a chimeric therapeutic monoclonal antibody (mAb) against the protein CD20, allowing it to destroy B cells and to treat lymphoma, leukemia, transplant rejection, and autoimmune disorder. In this work, the binding of rituximab to self-assembled monolayers (SAMs) of peptide mimotopes of CD20 antigen was systematically characterized. Four peptide mimotopes of CD 20 antigen were selected from the literature and redesigned to allow their SAM immobilizations on gold electrodes through a peptide linker with cysteine. The bindings of these peptides with rituximab and control mAbs (trastuzumab and bevacizumab) were characterized by quartz crystal microbalance (QCM). Among the four peptide mimotopes initially selected, the peptide designated as CN-14 (CGSGSGSWPRWLEN) was the most selective and sensitive for rituximab binding. The CN-14 SAM was further characterized by ellipsometry and atomic force microscopy. The thickness of the CN-14 SAM film was approximately 32 Å, and the CN-14 SAM is suggested to be stabilized by a salt bridge of Arg-10 and Glu-13 between CN-14 peptides. The CN-14 salt bridge was evaluated by a series of modifications to the CN-14 peptide sequence and characterized by QCM. The CN-14 amide variant produced a better affinity to rituximab than CN-14 without a significant impact on selectivity. As the pKa of the Glu residue of CN-14 increased, the affinity of the SAM to rituximab increased, whereas the selectivity decreased. This was attributed to the weakening of the salt bridge between the CN-14 Arg-10 and Glu-13 at higher pKa values for Glu-13. Our study shows that peptide mimotopes have potential benefits in sensor applications, as the peptide-peptide interactions in the SAMs can be manipulated by the addition of functional groups to the peptide to influence the binding of target proteins.

A continuous-flow mass biosensor for the real-time dynamic analysis of protease inhibition

A flow injection analysis–quartz crystal microbalance (FIA–QCM) biosensor system was introduced for probing the dynamic interactions during protease inhibition.

Mimtags: the use of phage display technology to produce novel protein-specific probes

In recent times the use of protein-specific probes in the field of proteomics has undergone evolutionary changes leading to the discovery of new probing techniques. Protein-specific probes serve two main purposes: epitope mapping and detection assays. One such technique is the use of phage display in the random selection of peptide mimotopes (mimtags) that can tag epitopes of proteins, replacing the use of monoclonal antibodies in detection systems. In this study, phage display technology was used to screen a random peptide library with a biologically active purified human interleukin-4 receptor (IL-4R) and interleukin-13 (IL-13) to identify mimtag candidates that interacted with these proteins. Once identified, the mimtags were commercially synthesised, biotinylated and used for in vitro immunoassays. We have used phage display to identify M13 phage clones that demonstrated specific binding to IL-4R and IL-13 cytokine. A consensus in binding sequences was observed and phage clones characterised had identical peptide sequence motifs. Only one was synthesised for use in further immunoassays, demonstrating significant binding to either IL-4R or IL-13. We have successfully shown the use of phage display to identify and characterise mimtags that specifically bind to their target epitope. Thus, this new method of probing proteins can be used in the future as a novel tool for immunoassay and detection technique, which is cheaper and more rapidly produced and therefore a better alternative to the use of monoclonal antibodies.

Real time analysis of binding between Rituximab (anti-CD20 antibody) and B lymphoma cells

CD20, expressed on greater than 90% of B-lymphocytic lymphomas, is an attractive target for antibody therapy. Rituximab is a chimeric murine/human-engineered monoclonal antibody which can selectively deplete CD20-expressing cells in peripheral blood and lymphoid tissues. The immobilization of B-lymphoblast-like Burkitt's lymphoma Raji cells on the quartz crystal microbalance (QCM) gold electrode surface using arginine-glycine-aspartic acid (RGD) tripeptide was electrochemically confirmed. The real-time processes of attachment of Raji cells on the gold electrode and the subsequent binding of Rituximab to the cells were studied using a QCM biosensor. The interaction between Rituximab and Raji cells led to the increased resonant frequency shifts (Δf0) in the studied antibody concentration range from 5 to 250 μg mL(-1) following the Langmuir adsorption model. From these observations, the apparent binding constant between a single-layer of Rituximab and Raji cells was calculated to be 1.6 × 10(6) M(-1). Control experiments using other therapeutic antibodies (i.e., Trastuzumab and Bevacizumab) and different cells (i.e., T cells and endothelial cells) proved the specific interaction between Rituximab and B cells. The effects of Ca(2+) and Mn(2+) ions on the Rituximab-Raji cell interaction were also studied providing the enhanced QCM signals, in particular with Ca(2+), further indicating that CD20 is a calcium ion channel that can transport these metal ions into the cells and accelerate the cell lysis induced by Rituximab. Thus, the real time capability of QCM and its simplicity of operation are shown to be highly suitable for multipurpose studies on living cells including cell-immobilization, cytotoxicity of drugs, and the cell action mechanisms.

Characterization of the native and denatured herceptin by enzyme linked immunosorbent assay and quartz crystal microbalance using a high-affinity single chain fragment variable recombinant antibody

Herceptin/Trastuzumab is a humanized IgG1κ light chain antibody used to treat some forms of breast cancer. A phage-displayed recombinant antibody library was used to obtain a single chain fragment variable (scFv, designated 2B4) to a linear synthetic peptide representing Herceptin's heavy chain CDR3. Enzyme linked immunosorbent assays (ELISAs) and piezoimmunosensor/quartz crystal microbalance (QCM) assays were used to characterize 2B4-binding activity to both native and heat denatured Herceptin. The 2B4 scFv specifically bound to heat denatured Herceptin in a concentration dependent manner over a wide (35-220.5 nM) dynamic range. Herceptin denatures and forms significant amounts of aggregates when heated. UV-vis characterization confirms that Herceptin forms aggregates as the temperature used to heat Herceptin increases. QCM affinity assay shows that binding stoichiometry between 2B4 scFv and Herceptin follows a 1:2 relationship proving that 2B4 scFv binds strongly to the dimers of heat denatured Herceptin aggregates and exhibits an affinity constant of 7.17 × 10(13) M(-2). The 2B4-based QCM assay was more sensitive than the corresponding ELISA. Combining QCM with ELISA can be used to more fully characterize nonspecific binding events in assays. The potential theoretical and clinical implications of these results and the advantages of the use of QCM to characterize human therapeutic antibodies in samples are also discussed.

Recombinant antibodies and their use in biosensors

Inexpensive, noninvasive immunoassays can be used to quickly detect disease in humans. Immunoassay sensitivity and specificity are decidedly dependent upon high-affinity, antigen-specific antibodies. Antibodies are produced biologically. As such, antibody quality and suitability for use in immunoassays cannot be readily determined or controlled by human intervention. However, the process through which high-quality antibodies can be obtained has been shortened and streamlined by use of genetic engineering and recombinant antibody techniques. Antibodies that traditionally take several months or more to produce when animals are used can now be developed in a few weeks as recombinant antibodies produced in bacteria, yeast, or other cell types. Typically most immunoassays use two or more antibodies or antibody fragments to detect antigens that are indicators of disease. However, a label-free biosensor, for example, a quartz-crystal microbalance (QCM) needs one antibody only. As such, the cost and time needed to design and develop an immunoassay can be substantially reduced if recombinant antibodies and biosensors are used rather than traditional antibody and assay (e.g. enzyme-linked immunosorbant assay, ELISA) methods. Unlike traditional antibodies, recombinant antibodies can be genetically engineered to self-assemble on biosensor surfaces, at high density, and correctly oriented to enhance antigen-binding activity and to increase assay sensitivity, specificity, and stability. Additionally, biosensor surface chemistry and physical and electronic properties can be modified to further increase immunoassay performance above and beyond that obtained by use of traditional methods. This review describes some of the techniques investigators have used to develop highly specific and sensitive, recombinant antibody-based biosensors for detection of antigens in simple or complex biological samples.