Sensitive Luminometric Method for Protein Quantification in Bacterial Cell Lysate Based on Particle Adsorption and Dissociation of Chelated Europium

Magnetic Nanohydrometallurgy Applied to Lanthanide Separation

Lanthanides play an important role in modern technology because of their outstanding optical, electronic, and magnetic properties. Their current hydrometallurgical processing involves lixiviation, leading to concentrates of elements whose separation requires exhaustive procedures because of their similar chemical properties. In this sense, a new nanotechnological approach is here discussed, involving the use of iron oxide nanoparticles functionalized with complexing agents, such as diethylenetriaminepentaacetic acid (DTPA), for carrying out the magnetic extraction and separation of the lanthanide ions in aqueous solution. This strategy, also known as magnetic nanohydrometallurgy (MNHM), was first introduced in 2011 for dealing with transition metal recovery in the laboratory, and has been recently extended to the lanthanide series. This technology is based on lanthanide complexation and depends on the chemical equilibrium involved. It has been better described in terms of Langmuir isotherms, considering a uniform distribution of the metal ions over the nanoparticles surface, as evidenced by high angle annular dark field microscopy. The observed affinity parameters correlate with the lanthanide ion contraction series, and the process dynamics have been studied by monitoring the nanoparticles migration under an applied magnetic field (magnetophoresis). The elements can be reversibly captured and released from the magnetically confined nanoparticles, allowing their separation by a simple acid-base treatment. It can operate in a circular scheme, facilitated by the easy magnetic recovery of the extracting agents, without using organic solvents and ionic exchange columns. MNHM has been successfully tested for the separation of the lanthanide elements from monazite mineral, and seems a promising green nanotechnology, particularly suitable for urban mining.

Nonspecific luminometric assay for monitoring protein adsorption efficiency and coverage on nanoparticles

Nonspecific assays utilizing time-resolved luminescence resonance energy transfer (TR-LRET) are developed for two applications: to monitor protein adsorption efficiency and to assess the degree of surface coverage on the solid phase. We successfully measure the adsorption efficiency of non-sedimenting nanoparticles since this has been notoriously difficult to determine. Monitoring of the protein adsorption on nanoparticles does not require the nanoparticles with the adsorbed protein to be washed and it is based on the competitive adsorption between the non-adsorbed analyte protein and the acceptor-labeled protein to donor europium(iii) polystyrene nanoparticles. The application for assessing the degree of surface coverage is performed with the final coated and washed analyte nanoparticles and it requires no fluorescent labeling of the studied protein. This application utilizes the competitive adsorption of the acceptor-labeled protein on analyte nanoparticles partly covered with protein and donor europium(iii) polystyrene nanoparticles. The developed methods detect either non-adsorbed protein or uncovered nanoparticle surface, not the proteins adsorbed on the nanoparticles. This is not achievable with the traditional total protein quantification assays applied for monitoring protein adsorption since both non-adsorbed and adsorbed protein are detected and their separation is required. Thus, the developed application for monitoring protein adsorption is user-friendly, requires no centrifugal instrumentation, and is applicable also for small nanoparticles requiring ultracentrifugation. No special expertise or investment in costly instruments is required compared to the existing methods, such as spectroscopic techniques, isothermal titration calorimetry, and surface plasmon resonance. The application for assessing the degree of surface coverage is compared to a reference literature method that comprised the analysis of adsorbed fluorescently labeled protein. The saturation reached at similar protein concentrations showing the reliability of the assay. Our results suggest that the developed applications could be exploited as rapid tools for protein adsorption studies on nanoparticles and for quality control and characterization of the coating processes.

Quantitative and discriminative analysis of nucleic acid samples using luminometric nonspecific nanoparticle methods

Homogeneous simple assays utilizing luminescence quenching and time-resolved luminescence resonance energy transfer (TR-LRET) were developed for the quantification of nucleic acids without sequence information. Nucleic acids prevent the adsorption of a protein to europium nanoparticles which is detected as a luminescence quenching of europium nanoparticles with a soluble quencher or as a decrease of TR-LRET from europium nanoparticles to the acceptor dye. Contrary to the existing methods based on fluorescent dye binding to nucleic acids, equal sensitivities for both single- (ssDNA) and double-stranded DNA (dsDNA) were measured and a detection limit of 60 pg was calculated for the quenching assay. The average coefficient of variation was 5% for the quenching assay and 8% for the TR-LRET assay. The TR-LRET assay was also combined with a nucleic acid dye selective to dsDNA in a single tube assay to measure the total concentration of DNA and the ratio of ssDNA and dsDNA in the mixture. To our knowledge, such a multiplexed assay is not accomplished with commercially available assays.

Method for determination of polyethylene glycol molecular weight

A method utilizing competitive adsorption between polyethylene glycols (PEGs) and labeled protein to nanoparticles was developed for the determination of PEG molecular weight (MW) in a microtiter plate format. Two mix-and-measure systems, time-resolved luminescence resonance energy transfer (TR-LRET) with donor europium(III) polystyrene nanoparticles and acceptor-labeled protein and quenching with quencher gold nanoparticles and fluorescently labeled protein were compared for their performance. MW is estimated from the PEG MW dependent changes in the competitive adsorption properties, which are presented as the luminescence signal vs PEG mass concentration. The curves obtained with the TR-LRET system overlapped for PEGs larger than 400 g/mol providing no information on MW. Distinctly different curves were obtained with the quenching system enabling the assessment of PEG MW within a broad dynamic range. The data was processed with and without prior knowledge of the PEG concentration to measure PEGs over a MW range from 62 to 35,000 g/mol. The demonstration of the measurement independent of the PEG concentration suggests that the estimation of MW is possible with quenching nanoparticle system for neutrally charged and relatively hydrophilic polymeric molecules widening the applicability of the simple and cost-effective nanoparticle-based methods.

Ultrasensitive protein concentration detection on a micro/nanofluidic enrichment chip using fluorescence quenching

A micro/nanofluidic enrichment device combined with the Förster resonance energy transfer (FRET) technique has been developed for sensitive detection of trace quantities of protein. In this approach, sample protein is first adsorbed on gold nanoparticles (AuNPs) to occupy part of the AuNP surface. Then, dye-labeled protein is added, which adsorbs to the residual active sites of the AuNP surface, saturating the AuNP surface with protein molecules. The unadsorbed dye-labeled protein remains in a free state in the system. Keeping a fixed amount of dye-labeled protein, a high concentration of sample protein leads to more free dye-labeled protein molecules remaining in the system, and thus a larger photoluminescence signal. Under the action of an electric field, the free dye-labeled protein molecules can be efficiently enriched in front of the nanochannel of a micro/nanofluidic chip, which greatly amplifies the magnitude of the photoluminescence and improves the detection sensitivity. As a demonstration, bovine serum albumin (BSA) and fluorescein isothiocyanate-labeled dog serum albumin (FITC-DSA) are used as sample and fluorescent proteins, respectively. Using the proposed strategy, a detection limit of BSA as low as 2.5 pg/mL can be achieved, which is more than 10(3) times lower than the reported minimums in most sensitive commercial protein quantification methods.

Development of a microchip Europium nanoparticle immunoassay for sensitive point-of-care HIV detection

Rapid, sensitive and specific diagnostic assays play an indispensable role in determination of HIV infection stages and evaluation of efficacy of antiretroviral therapy. Recently, our laboratory developed a sensitive Europium nanoparticle-based microtiter-plate immunoassay capable of detecting target analytes at subpicogram per milliliter levels without the use of catalytic enzymes and signal amplification processes. Encouraged by its sensitivity and simplicity, we continued to miniaturize this assay to a microchip platform for the purpose of converting the benchtop assay technique to a point-of-care test. It was found that detection capability of the microchip platform could be readily improved using Europium nanoparticle probes. We were able to routinely detect 5 pg/mL (4.6 attomoles) of HIV-1 p24 antigen at a signal-to-blank ratio of 1.5, a sensitivity level reasonably close to that of microtiter-plate Europium nanoparticle assay. Meanwhile, use of the microchip platform effectively reduced sample/reagent consumption 4.5 fold and shortened total assay time 2 fold in comparison with microtiter plate assays. Complex matrix substance in plasma negatively affected the microchip assays and the effects could be minimized by diluting the samples before loading. With further improvements in sensitivity, reproducibility, usability, assay process simplification, and incorporation of portable time-resolved fluorescence reader, Europium nanoparticle immunoassay technology could be adapted to meet the challenges of point-of-care diagnosis of HIV or other health-threatening pathogens at bedside or in resource-limited settings.

Nonspecific particle-based method with two-photon excitation detection for sensitive protein quantification and cell counting

A novel easy-to-use homogeneous method utilizing two-photon excitation (TPX) for quantification of proteins or counting of eukaryotic cells in solution has been developed. This highly sensitive technique is based on the adsorption competition between the sample and fluorescently labeled protein to micrometer-sized carboxylate modified polystyrene particles and detection of two-photon excited fluorescence. The adsorption of the labeled protein to the particles was detected as a distinct fluorescence on individual microparticles. Analyte protein or eukaryotic cells interacted with particle surface and reduced the adsorption of labeled protein to the particles resulting in a decrease of the fluorescence. The optimizations of assay conditions were performed separately for protein quantification and cell counting, and the principle of the method was confirmed with the fluorescence microscopy imaging. The protein quantification assay allowed the determination of picogram quantities (1.2 μg/L) of protein, and the cell counting assay allowed three cells in the sample with an average variation of approximately 10% in the signal. The protein assay sensitivity was more than 500-fold improved from the common most sensitive commercial methods. Moreover, the dynamic range of the assay was broad, approximately 4 orders of magnitude. The cell assay has sensitivity comparable to the most sensitive commercial method. The developed method tolerates interfering agents such as neutral detergents found in cell lysate samples even at high concentrations. The method is experimentally fairly simple and allows the expansion for the use of the TPX technology.

Method for estimation of protein isoelectric point

Adsorption of sample protein to Eu(3+) chelate-labeled nanoparticles is the basis of the developed noncompetitive and homogeneous method for the estimation of the protein isoelectric point (pI). The lanthanide ion of the nanoparticle surface-conjugated Eu(3+) chelate is dissociated at a low pH, therefore decreasing the luminescence signal. A nanoparticle-adsorbed sample protein prevents the dissociation of the chelate, leading to a high luminescence signal. The adsorption efficiency of the sample protein is reduced above the isoelectric point due to the decreased electrostatic attraction between the negatively charged protein and the negatively charged particle. Four proteins with isoelectric points ranging from ~5 to 9 were tested to show the performance of the method. These pI values measured with the developed method were close to the theoretical and experimental literature values. The method is sensitive and requires a low analyte concentration of submilligrams per liter, which is nearly 10000 times lower than the concentration required for the traditional isoelectric focusing. Moreover, the method is significantly faster and simpler than the existing methods, as a ready-to-go assay was prepared for the microtiter plate format. This mix-and-measure concept is a highly attractive alternative for routine laboratory work.