Plasma pencil atmospheric mass spectrometry detection of positive ions from micronutrients emitted from surfaces

Template for 3D Printing a Low-Temperature Plasma Probe

Low-temperature plasma (LTP) ionization represents an emerging technology in ambient mass spectrometry. LTP enables the solvent-free direct detection of a broad range of molecules and mass spectrometry imaging (MSI). The low energy consumption and modest technical requirements of these ion sources favors their employment in mobile applications and as a means to upgrade existing mass analyzers. However, the broad adoption of LTP is hindered by the lack of commercial devices, and constructing personal devices is tricky. Improper setup can result in equipment malfunction or may cause serious damage to instruments due to strong electromagnetic fields or arcing. With this in mind, we developed a reproducible LTP probe, which is designed exclusively from commercial and 3D printed components. The plasma jet generated by the device has a diameter of about 200 μm, which is satisfactory for the ambient imaging of macroscopic samples. We coupled the 3D-LTP probe to an ion trap analyzer and demonstrated the functionality of the ion source by detecting organic and chemical compounds from pure reference standards, biological substances, and pharmaceutical samples. Molecules were primarily detected in their protonated form or as water/ammonium adducts. The identification of compounds was possible by standard collision-induced dissociation (CID) fragmentation spectra. The files necessary to reproduce the 3D parts are available from the project page ( http://lababi.bioprocess.org/index.php/3d-ltp ) under a dual license model, which permits reproduction of the probe and further community-driven development for noncommercial use ("peer production"). Our reproducible probe design thus contributes to a facilitated adaption and evolution of low-temperature plasma technologies in analytical chemistry.

Plasma-based ambient mass spectrometry techniques: The current status and future prospective

Plasma-based ambient mass spectrometry is emerging as a frontier technology for direct analysis of sample that employs low-energy plasma as the ionization reagent. The versatile sources of ambient mass spectrometry (MS) can be classified according to the plasma formation approaches; namely, corona discharge, glow discharge, dielectric barrier discharge, and microwave-induced discharge. These techniques allow pretreatment-free detection of samples, ranging from biological materials (e.g., flies, bacteria, plants, tissues, peptides, metabolites, and lipids) to pharmaceuticals, food-stuffs, polymers, chemical warfare reagents, and daily-use chemicals. In most cases, plasma-based ambient MS performs well as a qualitative tool and as an analyzer for semi-quantitation. Herein, we provide an overview of the key concepts, mechanisms, and applications of plasma-based ambient MS techniques, and discuss the challenges and outlook.

Low-temperature plasma for compositional depth profiling of crosslinking organic multilayers: comparison with C60 and giant argon gas cluster sources

RATIONALE

For organic electronics, device performance can be affected by interlayer diffusion across interfaces. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) can resolve buried structures with nanometer resolution, but instrument artifacts make this difficult. Low-temperature plasma (LTP) is suggested as a way to prepare artifact-free surfaces for accurate determination of chemical diffusion.

METHODS

A model organic layer system consisting of three 1 nm delta layers of 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) separated by three 30 nm layers of tris(8-hydroxyquinolinato)aluminum (Alq3) was used to evaluate the effectiveness of LTP etching for the preparation of crater edge surfaces for subsequent compositional depth profile analysis. This was compared with depth profiles obtained using an instrument equipped with an argon cluster sputter source.

RESULTS

The quality of the depth profiles was determined by comparing the depth resolutions of the BCP delta layers. The full width at half maximum gave depth resolutions of 6.9 nm and 6.0 nm using LTP, and 6.2 nm and 5.8 nm using argon clusters. In comparison, the 1/e decay length of the trailing edge gave depth resolutions of 2.0 nm and 1.8 nm using LTP, and 3.5 nm and 3.4 nm using argon clusters.

CONCLUSIONS

The comparison of the 1/e decay lengths showed that LTP can determine the thickness and composition of the buried structures without instrument artifacts. Although it does suffer from contaminant deposition, LTP was shown to be a viable option for preparing crater edges for a more accurate determination of buried structures.

Technologies for detecting falsified and substandard drugs in low and middle-income countries

Falsified and substandard drugs are a global health problem, particularly in low- and middle-income countries (LMIC) that have weak pharmacovigilance and drug regulatory systems. Poor quality medicines have important health consequences, including the potential for treatment failure, development of antimicrobial resistance, and serious adverse drug reactions, increasing healthcare costs and undermining the public's confidence in healthcare systems. This article presents a review of the methods employed for the analysis of pharmaceutical formulations. Technologies for detecting substandard and falsified drugs were identified primarily through literature reviews. Key-informant interviews with experts augmented our methods when warranted. In order to aid comparisons, technologies were assigned a suitability score for use in LMIC ranging from 0-8. Scores measured the need for electricity, need for sample preparation, need for reagents, portability, level of training required, and speed of analysis. Technologies with higher scores were deemed the most feasible in LMICs. We categorized technologies that cost $10,000 USD or less as low cost, $10,000-100,000 USD as medium cost and those greater than $100,000 USD as high cost technologies (all prices are 2013 USD). This search strategy yielded information on 42 unique technologies. Five technologies were deemed both low cost and had feasibility scores between 6-8, and an additional four technologies had medium cost and high feasibility. Twelve technologies were deemed portable and therefore could be used in the field. Many technologies can aid in the detection of substandard and falsified drugs that vary from the simplest of checklists for packaging to the most complex mass spectrometry analyses. Although there is no single technology that can serve all the requirements of detecting falsified and substandard drugs, there is an opportunity to bifurcate the technologies into specific niches to address specific sections within the workflow process of detecting products.

Characterisation of a micro-plasma for ambient mass spectrometry imaging

A systematic characterisation and optimisation of parameters of a plasma-mediated ion source to achieve the best spatial resolution for MSI.

Ambient DESI and LESA-MS analysis of proteins adsorbed to a biomaterial surface using in-situ surface tryptic digestion

The detection and identification of proteins adsorbed onto biomaterial surfaces under ambient conditions has significant experimental advantages but has proven to be difficult to achieve with conventional measuring technologies. In this study, we present an adaptation of desorption electrospray ionization (DESI) and liquid extraction surface analysis (LESA) mass spectrometry (MS) coupled with in-situ surface tryptic digestion to identify protein species from a biomaterial surface. Cytochrome c, myoglobin, and BSA in a combination of single and mixture spots were printed in an array format onto Permanox slides, followed by in-situ surface digestion and detection via MS. Automated tandem MS performed on surface peptides was able to identify the proteins via MASCOT. Limits of detection were determined for DESI-MS and a comparison of DESI and LESA-MS peptide spectra characteristics and sensitivity was made. DESI-MS images of the arrays were produced and analyzed with imaging multivariate analysis to automatically separate peptide peaks for each of the proteins within a mixture into distinct components. This is the first time that DESI and LESA-MS have been used for the in-situ detection of surface digested proteins on biomaterial surfaces and presents a promising proof of concept for the use of ambient MS in the rapid and automated analysis of surface proteins.

Quantification and remote detection of nitro explosives by helium plasma ionization mass spectrometry (HePI-MS) on a modified atmospheric pressure source designed for electrospray ionization

Helium Plasma Ionization (HePI) generates gaseous negative ions upon exposure of vapors emanating from organic nitro compounds. A simple adaptation converts any electrospray ionization source to a HePI source by passing helium through the sample delivery metal capillary held at a negative potential. Compared with the demands of other He-requiring ambient pressure ionization sources, the consumption of helium by the HePI source is minimal (20-30 ml/min). Quantification experiments conducted by exposing solid deposits to a HePI source revealed that 1 ng of 2,4,6-trinitrotoluene (TNT) on a filter paper (about 0.01 ng/mm(2)) could be detected by this method. When vapor emanating from a 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) sample was subjected to helium plasma ionization mass spectrometry (HePI-MS), a peak was observed at m/z 268 for (RDX●NO(2))(-). This facile formation of NO(2)(-) adducts was noted without the need of any extra additives as dopants. Quantitative evaluations showed RDX detection by HePI-MS to be linear over at least three orders of magnitude. TNT samples placed even 5 m away from the source were detected when the sample headspace vapor was swept by a stream of argon or nitrogen and delivered to the helium plasma ion source via a metal tube. Among the tubing materials investigated, stainless steel showed the best performance for sample delivery. A system with a copper tube, and air as the carrier gas, for example, failed to deliver any detectable amount of TNT to the source. In fact, passing over hot copper appears to be a practical way of removing TNT or other nitroaromatics from ambient air.