Dioxetane-Doped Silica Nanoparticles as Ultrasensitive Reagentless Thermochemiluminescent Labels for Bioanalytics

Luminescent Aptamer-Based Bioassays for Sensitive Detection of Food Allergens

The presence of hidden allergens in food products, often due to unintended contamination along the food supply chain (production, transformation, processing, and transport), has raised the urgent need for rapid and reliable analytical methods for detecting trace levels of such species in food products. Indeed, food allergens represent a high-risk factor for allergic subjects due to potentially life-threatening adverse reactions. Portable biosensors based on immunoassays have already been developed as rapid, sensitive, selective, and low-cost analytical platforms that can replace analyses with traditional bench-top instrumentation. Recently, aptamers have attracted great interest as alternative biorecognition molecules for bioassays, since they can bind a variety of targets with high specificity and selectivity, and they enable the development of assays exploiting a variety of transduction and detection technologies. In particular, aptasensors based on luminescence detection have been proposed, taking advantage of the development of ultrasensitive tracers and enhancers. This review aims to summarize and discuss recent efforts in the field of food allergen analysis using aptamer-based bioassays with luminescence detection.

Prevent or Cure-The Unprecedented Need for Self-Reporting Materials

Self-reporting smart materials are highly relevant in modern soft matter materials science, as they allow for the autonomous detection of changes in synthetic polymers, materials, and composites. Despite critical advantages of such materials, for example, prolonged lifetime or prevention of disastrous material failures, they have gained much less attention than self-healing materials. However, as diagnosis is critical for any therapy, it is of the utmost importance to report the existence of system changes and their exact location to prevent them from spreading. Thus, we herein critically review the chemistry of self-reporting soft matter materials systems and highlight how current challenges and limitations may be overcome by successfully transferring self-reporting research concepts from the laboratory to the real world. Especially in the space of diagnostic self-reporting systems, the recent SARS-CoV-2 (COVID-19) pandemic indicates an urgent need for such concepts that may be able to detect the presence of viruses or bacteria on and within materials in a self-reporting fashion.

A rapid screening method for thermal conductivity properties of thermal insulation materials by a thermochemiluminescence probe

Acridine-based 1,2-dioxetane as a thermochemiluminescence (TCL) probe for temperature sensing exhibited an excellent response for temperature in the range of 85-130 °C with favorable sensitivity and good resolution. The proposed TCL probe could be applied to screen thermal conductivity properties of different thermal insulation materials.

Precision medicine, bioanalytics and nanomaterials: toward a new generation of personalized portable diagnostics

The customization of disease treatment focused on genetic, environmental and lifestyle factors of individual patients, including tailored medical decisions and treatments, is identified as precision medicine. This approach involves the combination of various aspects such as the collection and processing of a large amount of data, the selection of optimized and personalized drug dosage for each patient and the development of selective and reliable analytical tools for the monitoring of clinical, genetic and environmental parameters. In this context, miniaturized, compact and ultrasensitive bioanalytical devices play a crucial role for achieving the goals of personalized medicine. In this review, the latest analytical technologies suitable for providing portable and easy-to-use diagnostic tools in clinical settings will be discussed, highlighting new opportunities arising from nanotechnologies, offering peculiar perspectives and opportunities for precision medicine.

2-Sulfanylhydroquinone Dimer as a Switchable Fluorescent Dye

A new dye was developed, the photoluminescence properties of which are controlled by a chemical reaction. The fluorescence properties of 2-sulfanylhydroquinone dimers depend on the number of hydroxyl groups that are acylated. Unprotected or monoacylated 2-sulfanylhydroquinone dimers displayed good fluorescence properties, whereas diacylated and tetraacylated 2-sulfanylhydroquinone dimers showed dramatically decreased fluorescence. A monomesylated derivative was devised, which shows good fluorescence characteristics as a switching fluorescence dye through a chemical reaction.

Thermochemiluminescent peroxide crystals

Chemiluminescence, a process of transduction of energy stored within chemical bonds of ground-state reactants into light via high-energy excited intermediates, is known in solution, but has remained undetected in macroscopic crystalline solids. By detecting thermally induced chemiluminescence from centimeter-size crystals of an organic peroxide here we demonstrate direct transduction of heat into light by thermochemiluminescence of bulk crystals. Heating of crystals of lophine hydroperoxide to ~115 °C results in detectable emission of blue-green light with maximum at 530 nm with low chemiluminescent quantum yield [(2.1 ± 0.1) × 10^‒7 E mol^‒1]. Spectral comparison of the thermochemiluminescence in the solid state and in solution revealed that the solid-state thermochemiluminescence of lophine peroxide is due to emission from deprotonated lophine. With selected 1,2-dioxetane, endoperoxide and aroyl peroxide we also establish that the thermochemiluminescence is common for crystalline peroxides, with the color of the emitted light varying from blue to green to red.

Chemiluminescence is known in solution, but has remained undetected in macroscopic crystalline solids so far. Here the authors demonstrate direct transduction of heat into light by thermochemiluminescence in a centimeter-size lophine hydroperoxide crystal.

Thermochemiluminescent semiconducting polymer dots as sensitive nanoprobes for reagentless immunoassay

Thermochemiluminescence (TCL) is a potentially simple and sensitive detection principle, as the light emission is simply elicited by thermally-triggered decomposition of a molecule to produce a singlet excited-state product. Here we report about TCL semiconductive polymer dots (TCL-Pdots) obtained by doping fluorescent cyano-polyphenylene vinylene (CN-PPV) Pdots with an acridine 1,2-dioxetane derivative. The TCL-Pdots showed remarkable stability over time and minimum leaching of the thermo-responsive species. Furthermore, detectability of TCL-Pdots was improved by taking advantage of both the high number of 1,2-dioxetanes entrapped in each nanoparticle (about 20 molecules per Pdot) and the 5-fold enhancement of TCL emission due to energy transfer from 1,2-dioxetane to the polymer matrix, which itself acted as an energy acceptor. Indeed, upon heating the TCL-Pdots to 110 °C, 1,2-dioxetane decomposes generating an acridanone product in its electronically excited state. The latter transfers its energy to the surrounding CN-PPV chains via the Förster mechanism (φFRET about 80%), resulting in intense yellow light emission (550 nm wavelength). We next conjugated streptavidin onto the surface of these TCL-Pdots and demonstrated their suitability for use in biological studies. In particular, we used TCL-Pdots as labels in a model non-competitive immunoassay for IgG detection, which showed a LOD of 13 nM IgG and a dynamic range extending up to 230 nM. By combining the biocompatibility, brightness and tunability of Pdot fluorescence emission with the thermally-triggered reagentless light generation from TCL 1,2-dioxetanes, a broad panel of ultrabright TCL nanosystems could be designed for a variety of bioscience applications, even in multiplexed formats.

Photoactive fluoropolymer surfaces that release sensitizer drug molecules

We describe a physical-organic study of two fluoropolymers bearing a photoreleasable PEGylated photosensitizer that generates (1)O2((1)Δg) [chlorin e6 methoxy tri(ethylene glycol) triester]. The surfaces are Teflon/poly(vinyl alcohol) (PVA) nanocomposite and fluorinated silica. The relative efficiency of these surfaces to photorelease the PEGylated sensitizer [shown previously to be phototoxic to ovarian cancer cells (Kimani, S. et al. J. Org. Chem 2012, 77, 10638)] was slightly higher for the nanocomposite. In the presence of red light and O2, (1)O2 is formed, which cleaves an ethene linkage to liberate the sensitizer in 68-92% yield. The fluoropolymers were designed to deal with multiple problems. Namely, their success relied not only on high O2 solubility and drug repellency but also on the C-F bonds, which physically quench little (1)O2, for singlet oxygen's productive use away from the surface. The results obtained here indicate that Teflon-like surfaces have potential uses in delivering sensitizer and singlet oxygen for applications in tissue repair and photodynamic therapy (PDT).

Amplified fluorescence quenching of lucigenin self-assembled inside silica/chitosan nanoparticles by Cl⁻

Fluorescence sensing of an analyte based on the fluorophore collective effect is a reliable, sensitive sensing approach. Many ultralow targets can be detected on the basis of the high sensitivity and signal amplification of the fluorescence sensing system. However, the complicated synthesis procedures, harsh conditions required to design and control the fluorescence molecular probes and conjugated chain length, and the higher cost of synthesis are still challenges. To address these issues, we developed a simple, rapid, and sensitive collective effect based fluorescence sensing platform. In this sensing platform, the fluorophore unit was self-assembled on the wall of the nanopores of the porous structural silica/chitosan nanoparticles (SCNPs) on the basis of the electrostatic interaction and supermolecular interaction between the fluorophores and SiO(-) groups and chitosan. Since these self-assembled fluorophores are close enough to communicate with each other on the basis of the space confinement effect of the pore size, many fluorophore units could interact with a single analyte and produce an amplified fluorescence sensing ability. Chloride ion, an important anion in biological fluids, and lucigenin, a typical fluorescent dye, were used as a model to confirm the proof-of-concept strategy. Our results showed that, compared to free-state lucigenin in solution, the assembled-state lucigenin in SCNPs presented an about 10-fold increase in its Stern-Volmer constant when the concentration of Cl(-) was lower than 10 mM, and this fluorescence nanosensor was also successfully used to sense the chloride ion in living cells.

Energy transfer processes in dye-doped nanostructures yield cooperative and versatile fluorescent probes

Fast and efficient energy transfer among dyes confined in nanocontainers provides the basis of outstanding functionalities in new-generation luminescent probes. This feature article provides an overview of recent research achievements on luminescent Pluronic-Silica NanoParticles (PluS NPs), a class of extremely monodisperse core-shell nanoparticles whose design can be easily tuned to match specific needs for diverse applications based on luminescence, and that have already been successfully tested in in vivo imaging. An outline of their outstanding properties, such as tuneability, bright and photoswitchable fluorescence and electrochemiluminescence, will be supported by a critical discussion of our recent works in this field. Furthermore, novel data and simulations will be presented to (i) thoroughly examine common issues arising from the inclusion of multiple dyes in a small silica core, and (ii) show the emergence of a cooperative behaviour among embedded dyes. Such cooperative behaviour provides a handle for fine control of brightness, emission colour and self-quenching phenomena in PluS NPs, leading to significantly enhanced signal to noise ratios.

Dye-doped silica nanoparticles as luminescent organized systems for nanomedicine

This review summarizes developments and applications of luminescent dye doped silica nanoparticles as versatile organized systems for nanomedicine.