High-throughput differentiation of heparin from other glycosaminoglycans by pyrolysis mass spectrometry

Capillary Electrophoretic Analysis of Isolated Sulfated Polysaccharides to Characterize Pharmaceutical Products

Capillary electrophoresis is a powerful methodology for quantification and structural characterization of highly anionic polysaccharides. Separation of saccharides under conditions of electrophoretic flow, typically achieved under low pH (Ampofo et al., Anal Biochem 199: 249-255, 1991; Rhomberg et al., Proc Natl Acad Sci U S A 95: 4176-4181, 1998) is charge-based. Resolution of components is often superior to flow-based techniques, such as liquid chromatography. During the heparin contamination crisis, capillary electrophoresis was one of the key methodologies used to identify whether or not heparin lots were contaminated (Guerrini et al., Nat Biotechnol 26: 669-675, 2008; Ye et al., J Pharm Biomed Anal 85: 99-107, 2013; Volpi et al., Electrophoresis 33: 1531-1537, 2012).Here we describe a method for the isolation of sulfated heparin/heparan sulfate saccharides from urine, their digestion by deployment of heparinase enzymes (Ernst et al., Crit Rev Biochem Mol Biol 30: 387-444, 1995) resolution of species through use of orthogonal digestions, and analysis of the resulting disaccharides by capillary electrophoresis.

Clinical Chemistry for Developing Countries: Mass Spectrometry

Early disease diagnosis is necessary to enable timely interventions. Implementation of this vital task in the developing world is challenging owing to limited resources. Diagnostic approaches developed for resource-limited settings have often involved colorimetric tests (based on immunoassays) due to their low cost. Unfortunately, the performance/sensitivity of such simplistic tests are often limited and significantly hinder opportunities for early disease detection. A new criterion for selecting diagnostic tests in low- and middle-income countries is proposed here that is based on performance-to-cost ratio. For example, modern mass spectrometry (MS) now involves analysis of the native sample in the open laboratory environment, enabling applications in many fields, including clinical research, forensic science, environmental analysis, and agriculture. In this critical review, we summarize recent developments in chemistry that enable MS to be applied effectively in developing countries. In particular, we argue that closed automated analytical systems may not offer the analytical flexibility needed in resource-limited settings. Alternative strategies proposed here have potential to be widely accepted in low- and middle-income countries through the utilization of the open-source ambient MS platform that enables microsampling techniques such as dried blood spot to be coupled with miniature mass spectrometers in a centralized analytical platform. Consequently, costs associated with sample handling and maintenance can be reduced by >50% of the total ownership cost, permitting analytical measurements to be operated at high performance-to-cost ratios in the developing world.

Tools for the Quality Control of Pharmaceutical Heparin

Heparin is a vital pharmaceutical anticoagulant drug and remains one of the few naturally sourced pharmaceutical agents used clinically. Heparin possesses a structural order with up to four levels of complexity. These levels are subject to change based on the animal or even tissue sources that they are extracted from, while higher levels are believed to be entirely dynamic and a product of their surrounding environments, including bound proteins and associated cations. In 2008, heparin sources were subject to a major contamination with a deadly compound-an over-sulphated chondroitin sulphate polysaccharide-that resulted in excess of 100 deaths within North America alone. In consideration of this, an arsenal of methods to screen for heparin contamination have been applied, based primarily on the detection of over-sulphated chondroitin sulphate. The targeted nature of these screening methods, for this specific contaminant, may leave contamination by other entities poorly protected against, but novel approaches, including library-based chemometric analysis in concert with a variety of spectroscopic methods, could be of great importance in combating future, potential threats.

Single Molecule Identification and Quantification of Glycosaminoglycans Using Solid-State Nanopores

Glycosaminoglycans (GAGs) are a class of polysaccharides with potent biological activities. Due to their complex and heterogeneous composition, varied charge, polydispersity, and presence of isobaric stereoisomers, the analysis of GAG samples poses considerable challenges to current analytical techniques. In the present study, we combined solid-state nanopores-a single molecule sensor with a support vector machine (SVM)-a machine learning algorithm for the analysis of GAGs. Our results indicate that the nanopore/SVM technique could distinguish between monodisperse fragments of heparin and chondroitin sulfate with high accuracy (>90%), allowing as low as 0.8% (w/w) of chondroitin sulfate impurities in a heparin sample to be detected. In addition, the nanopore/SVM technique distinguished between unfractionated heparin (UFH) and enoxaparin (low molecular weight heparin) with an accuracy of ∼94% on average. With a reference sample for calibration, a nanopore could achieve nanomolar sensitivity and a 5-Log dynamic range. We were able to quantify heparin with reasonable accuracy using multiple nanopores. Our studies demonstrate the potential of the nanopore/SVM technique to quantify and identify GAGs.

Simultaneous determination of multiple components in cigarettes by mechanochemical extraction and direct analysis in real time mass spectrometry in minutes

A simple, rapid and high throughput analytical approach with combination of mechanochemical extraction (MCE) and direct analysis in real time mass spectrometry (DART-MS) analysis was developed for the simultaneous determination of multiple chemical components in cigarette fillers. Different kinds of substances including nicotine, cigarette alkaloids, carbohydrates, organic acids, humectants and other additives were successfully extracted using MCE and detected by high resolution DART-MS. Six solvents of various polarities were compared during MCE process and significant differences were observed. Different brands of cigarettes as well as standard research cigarette exhibited distinctive chemical features and DART-MS fingerprints. Principle component analysis showed clear differentiation among different cigarettes extracted with the same solvent and different solvent extracts of the same type of cigarette. The putative chemical formulas were proposed based on accurate m/z values with <10 ppm mass errors. The relative contents of nicotine and other identified substances were compared and significant differences were observed among cigarettes of different locations. The whole procedure of MCE combined with DART-MS only takes minutes from raw cigarette fillers to obtaining the semi-quantitative results. The operation is simple and high throughput, providing an efficient method to analyze cigarette composition, and to establish a methodology to acquire the rapid cigarette fingerprints for quality control.

Analytical Chemistry in the Regulatory Science of Medical Devices

In the United States, regulatory science is the science of developing new tools, standards, and approaches to assess the safety, efficacy, quality, and performance of all Food and Drug Administration-regulated products. Good regulatory science facilitates consumer access to innovative medical devices that are safe and effective throughout the Total Product Life Cycle (TPLC). Because the need to measure things is fundamental to the regulatory science of medical devices, analytical chemistry plays an important role, contributing to medical device technology in two ways: It can be an integral part of an innovative medical device (e.g., diagnostic devices), and it can be used to support medical device development throughout the TPLC. In this review, we focus on analytical chemistry as a tool for the regulatory science of medical devices. We highlight recent progress in companion diagnostics, medical devices on chips for preclinical testing, mass spectrometry for postmarket monitoring, and detection/characterization of bacterial biofilm to prevent infections.

The US regulatory and pharmacopeia response to the global heparin contamination crisis

The contamination of the widely used lifesaving anticoagulant drug heparin in 2007 has drawn renewed attention to the challenges that are associated with the characterization, quality control and standardization of complex biological medicines from natural sources. Heparin is a linear, highly sulfated polysaccharide consisting of alternating glucosamine and uronic acid monosaccharide residues. Heparin has been used successfully as an injectable antithrombotic medicine since the 1930s, and its isolation from animal sources (primarily porcine intestine) as well as its manufacturing processes have not changed substantially since its introduction. The 2007 heparin contamination crisis resulted in several deaths in the United States and hundreds of adverse reactions worldwide, revealing the vulnerability of a complex global supply chain to sophisticated adulteration. This Perspective discusses how the US Food and Drug Administration (FDA), the United States Pharmacopeial Convention (USP) and international stakeholders collaborated to redefine quality expectations for heparin, thus making an important natural product better controlled and less susceptible to economically motivated adulteration.

Rapid detection of bacterial endotoxins in ophthalmic viscosurgical device materials by direct analysis in real time mass spectrometry

Bacterial endotoxins are lipopolysaccharides bound to the bacterial cell wall and released when bacteria rupture or disintegrate. Possible contamination of endotoxin in ophthalmic devices can cause a painful eye inflammation or result in toxic anterior segment syndrome after cataract surgery. Measurement of bacterial endotoxin in medical device materials is difficult since endotoxin binds with polymer matrix and some of the materials are very viscous and non-water soluble, where traditional enzyme-based Limulus amebocyte lysate (LAL) assay cannot be applied. Here we propose a rapid and high throughput ambient ionization mass spectrometric (MS) method using direct analysis in real time (DART) for the evaluation of endotoxin contamination in medical device materials. Large and structurally complex endotoxin instantaneously breaks down into low-mass characteristic fragment ions using DART and is detected by MS in both positive and negative ion modes. This method enables the identification and separation of endotoxin from medical materials with a detection limit of 0.03 ng mL^-1 endotoxins in aqueous solution. Ophthalmic viscosurgical device materials including sodium hyaluronate (NaHA), non-water soluble perfluoro-n-octane (PFO) and silicone oil (SO) were spiked with different known concentrations of endotoxin and analyzed by DART MS, where the presence of endotoxin was successfully detected and featured small mass fragment ions were generated for NaHA, PFO and SO as well. Current findings showed the feasibility of measuring endotoxin contamination in medical device materials using DART-MS, which can lead to a one-step analysis of endotoxins in different matrices, avoiding any potential contamination during sample pre-treatment steps.

Pharmacology of Heparin and Related Drugs

Heparin has been recognized as a valuable anticoagulant and antithrombotic for several decades and is still widely used in clinical practice for a variety of indications. The anticoagulant activity of heparin is mainly attributable to the action of a specific pentasaccharide sequence that acts in concert with antithrombin, a plasma coagulation factor inhibitor. This observation has led to the development of synthetic heparin mimetics for clinical use. However, it is increasingly recognized that heparin has many other pharmacological properties, including but not limited to antiviral, anti-inflammatory, and antimetastatic actions. Many of these activities are independent of its anticoagulant activity, although the mechanisms of these other activities are currently less well defined. Nonetheless, heparin is being exploited for clinical uses beyond anticoagulation and developed for a wide range of clinical disorders. This article provides a "state of the art" review of our current understanding of the pharmacology of heparin and related drugs and an overview of the status of development of such drugs.

The Challenge of Reproducibility and Accuracy in Nutrition Research: Resources and Pitfalls

Inconsistent and contradictory results from nutrition studies conducted by different investigators continue to emerge, in part because of the inherent variability of natural products, as well as the unknown and therefore uncontrolled variables in study populations and experimental designs. Given these challenges inherent in nutrition research, it is critical for the progress of the field that researchers strive to minimize variability within studies and enhance comparability between studies by optimizing the characterization, control, and reporting of products, reagents, and model systems used, as well as the rigor and reporting of experimental designs, protocols, and data analysis. Here we describe some recent developments relevant to research on plant-derived products used in nutrition research, highlight some resources for optimizing the characterization and reporting of research using these products, and describe some of the pitfalls that may be avoided by adherence to these recommendations.

Capillary electrophoretic analysis of isolated sulfated polysaccharides to characterize pharmaceutical products

Capillary electrophoresis is a powerful methodology for quantification and structural characterization of highly anionic polysaccharides. Separation of saccharides under conditions of electrophoretic flow, typically achieved under low pH (Ampofo et al., Anal Biochem 199:249-255, 1991; Rhomberg et al., Proc Natl Acad Sci U S A 95:4176-4181, 1998), is charge-based. Resolution of components is often superior to flow-based techniques, such as liquid chromatography. During the heparin contamination crisis, capillary electrophoresis was one of the key methodologies used to identify whether or not heparin lots were contaminated (Guerrini et al., Nat Biotechnol 26:669-675, 2008). Here we describe a method for isolation of sulfated heparin/heparan sulfate saccharides from urine, their digestion by deployment of heparinase enzymes (Ernst et al., Crit Rev Biochem Mol Biol 30:387-444, 1995), resolution of species through use of orthogonal digestions, and analysis of the resulting disaccharides by capillary electrophoresis.