Specific Probe Selection from Landscape Phage Display Library and Its Application in Enzyme-Linked Immunosorbent Assay of Free Prostate-Specific Antigen

Phage Display's Prospects for Early Diagnosis of Prostate Cancer

Prostate cancer (PC) is the second most diagnosed cancer among men. It was observed that early diagnosis of disease is highly beneficial for the survival of cancer patients. Therefore, the extension and increasing quality of life of PC patients can be achieved by broadening the cancer screening programs that are aimed at the identification of cancer manifestation in patients at earlier stages, before they demonstrate well-understood signs of the disease. Therefore, there is an urgent need for standard, sensitive, robust, and commonly available screening and diagnosis tools for the identification of early signs of cancer pathologies. In this respect, the "Holy Grail" of cancer researchers and bioengineers for decades has been molecular sensing probes that would allow for the diagnosis, prognosis, and monitoring of cancer diseases via their interaction with cell-secreted and cell-associated PC biomarkers, e.g., PSA and PSMA, respectively. At present, most PSA tests are performed at centralized laboratories using high-throughput total PSA immune analyzers, which are suitable for dedicated laboratories and are not readily available for broad health screenings. Therefore, the current trend in the detection of PC is the development of portable biosensors for mobile laboratories and individual use. Phage display, since its conception by George Smith in 1985, has emerged as a premier tool in molecular biology with widespread application. This review describes the role of the molecular evolution and phage display paradigm in revolutionizing the methods for the early diagnosis and monitoring of PC.

Bioscreening specific peptide-expressing phage and its application in sensitive dual-mode immunoassay of SARS-CoV-2 spike antigen

Biorecognition components with high affinity and selectivity are vital in bioassay to diagnose and treat epidemic disease. Herein a phage display strategy of combining single-amplification-panning with non-amplification-panning was developed, by which a phage displaying cyclic heptapeptide ACLDWLFNSC (peptide J4) with good affinity and specificity to SARS-CoV-2 spike protein (SP) was identified. Molecular docking suggests that peptide J4 binds to S2 subunit by hydrogen bonding and hydrophobic interaction. Then the J4-phage was used as the capture antibody to establish phage-based chemiluminescence immunoassay (CLIA) and electrochemical impedance spectroscopy (EIS) analytical systems. The as-proposed dual-modal immunoassay platform exhibited good sensitivity and reliability in SARS-CoV-2 SP and pseudovirus assay. The limit of detection for SARS-CoV-2 SP by EIS immunoassay is 0.152 pg/mL, which is dramatically lower than that of 42 pg/mL for J4-phage based CLIA. Further, low to 40 transducing units (TU)/mL, 10 TU/mL SARS-CoV-2 pseudoviruses can be detected by the proposed J4-phage based CLIA and electrochemical immunosensor, respectively. Therefore, the as-developed dual mode immunoassays are potential methods to detect SARS-CoV-2. It is also expected to explore various phages with specific peptides to different targets for bioanalysis.

Sensitive Lateral Flow Immunoassay Based on Specific Peptide and Superior Oxidase Mimics with a Universal Dual-Mode Significant Signal Amplification

Rapid and sensitive antigen detection using a lateral flow immunoassay (LFIA) is crucial for diagnosing infectious diseases due to its simplicity, speed, and user-friendly features. However, it remains a critical issue to explore specific biorecognition elements and powerful signal amplification. In this study, taking SARS-CoV-2 as a proof of concept, a specific peptide, WFLNDSELIML, binding to the SARS-CoV-2 spike (S) antigen was identified by a nonamplified biopanning method, which exhibited high affinity to the target, with a dissociation constant of 9.29 ± 1.55 nM. Molecular docking analysis reveals that this peptide binds to the N-terminal domain of the SARS-CoV-2 S antigen. Then, using this peptide as a capture probe and angiotensin-converting enzyme 2 as a detection probe, a peptide-based lateral flow immunoassay (pLFIA) for the sensitive detection of the SARS-CoV-2 S antigen without any antibody was developed, for which a polydopamine nanosphere (PDA)@MnO2 nanocomposite with excellent oxidase-like activity was used as a colorimetric label, exhibiting dual-mode remarkable signal amplification of natural melanin and on-demand nanozyme catalytic enhancement. The PDA@MnO2-based pLFIA is capable of detecting the SARS-CoV-2 S antigen with a limit of detection of 8.01 pg/mL, which is 18.7 times lower than that of a conventional pLFIA tagged with gold nanoparticles. Additionally, the as-proposed PDA@MnO2-based pLFIA can detect up to 150 transduction units/mL SARS-CoV-2 pseudoviruses spiked in saliva samples. Given the outstanding analytical performance, the proposed PDA@MnO2-based pLFIA may offer a reliable option for the rapid diagnosis of SARS-CoV-2.

An ultrasensitive ELISA to assay femtomolar level SARS-CoV-2 antigen based on specific peptide and tyramine signal amplification

The SARS-CoV-2 spreading rapidly has aroused catastrophic public healthcare issues and economy crisis worldwide. It plays predominant role to rapidly and accurately diagnose the virus for effective prevention and treatment. As an abundant transmembrane protein, spike protein (SP) is one of the most valuable antigenic biomarkers for diagnosis of COVID-19. Herein a phage expression of WNLDLSQWLPPM peptide specific to SARS-CoV-2 SP was screened. Molecular docking revealed that the isolated peptide binds to major antigenic epitope locating at S2 subunit with hydrogen bonding. Taking the specific peptide as antigen sensing probe and tyramine signal amplification (TSA), an ultrasensitive "peptide-antigen-antibody" ELISA (p-ELISA) was explored, by which the limit of detection (LOD) was 14 fM and 2.8 fM SARS-CoV-2 SP antigen for first TSA and secondary TSA, respectively. Compared with the LOD by the p-ELISA by direct mode, the sensitivity with 2nd TSA enhanced 100 times. Further, the proposed p-ELISA method can detect SARS-CoV-2 pseudoviruses down to 10 and 3 TCID₅₀/mL spiked in healthy nasal swab sample with 1st TSA and 2nd TSA, separately. Thus, the proposed p-ELISA method with TSA is expected to be a promising ultrasensitive tool for rapidly detecting SARS-CoV-2 antigen to help control the infectious disease.

Biopanning of specific peptide for SARS-CoV-2 nucleocapsid protein and enzyme-linked immunosorbent assay-based antigen assay

The ongoing severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has rapidly spread worldwide which triggered serious public health issues. The search for rapid and accurate diagnosis, effective prevention, and treatment is urgent. The nucleocapsid protein (NP) of SARS-CoV-2 is one of the main structural proteins expressed and most abundant in the virus, and is considered a diagnostic marker for the accurate and sensitive detection of SARS-CoV-2. Herein, we report the screening of specific peptides from the pIII phage library that bind to SARS-CoV-2 NP. The phage monoclone expressing cyclic peptide N1 (peptide sequence, ACGTKPTKFC, with C&C bridged by disulfide bonding) specifically recognizes SARS-CoV-2 NP. Molecular docking studies reveal that the identified peptide is bound to the "pocket" region on the SARS-CoV-2 NP N-terminal domain mainly by forming a hydrogen bonding network and through hydrophobic interaction. Peptide N1 with the C-terminal linker was synthesized as the capture probe for SARS-CoV-2 NP in ELISA. The peptide-based ELISA was capable of assaying SARS-CoV-2 NP at concentrations as low as 61 pg/mL (∼1.2 pM). Furthermore, the as-proposed method could detect the SARS-CoV-2 virus at limits as low as 50 TCID₅₀ (median tissue culture infective dose)/mL. This study demonstrates that selected peptides are powerful biomolecular tools for SARS-CoV-2 detection, providing a new and inexpensive method of rapidly screening infections as well as rapidly diagnosing coronavirus disease 2019 patients.

Phage engineering for development of diagnostic tools

The bacteriophages rely on the host cell to provide energy and resources for their own replication. Antibody-based diagnostic tests rely on the antibody and the biomarker interactions. Since, most of these diagnostic tools employ the use of antibodies; hence, they require intensive storage protocols at cold conditions and incur high time and capital cost due to their production and purification process. Phage-based diagnostics can overcome this limitation. Bacteriophages, have been used as emerging tools for the detection of various pathogens. Rapid phage-mediated detection assays have become commercial diagnostic tools. Conventional method and new cloning approaches have been followed to specifically detect a disease- causing microbial strains. This review discusses use of Phage typing as diagnostic tools, phage-based detection methods, and their usage for signal amplification. Design rules for reporter phage engineering are also discussed followed by different engineering platforms for phage genome editing. We also discuss recent examples of how phage research is influencing the recent advances in the development of phage-based diagnostics for ultra-sensitive detection of various bio-species, outlining the advantages and limitations of detection technology of phage-based assays.

M13 phage: a versatile building block for a highly specific analysis platform

Viruses are changing the biosensing and biomedicine landscape due to their multivalency, orthogonal reactivities, and responsiveness to genetic modifications. As the most extensively studied phage model for constructing a phage display library, M13 phage has received much research attention as building blocks or viral scaffolds for various applications including isolation/separation, sensing/probing, and in vivo imaging. Through genetic engineering and chemical modification, M13 phages can be functionalized into a multifunctional analysis platform with various functional regions conducting their functionality without mutual disturbance. Its unique filamentous morphology and flexibility also promoted the analytical performance in terms of target affinity and signal amplification. In this review, we mainly focused on the application of M13 phage in the analytical field and the benefit it brings. We also introduced several genetic engineering and chemical modification approaches for endowing M13 with various functionalities, and summarized some representative applications using M13 phages to construct isolation sorbents, biosensors, cell imaging probes, and immunoassays. Finally, current issues and challenges remaining in this field were discussed and future perspectives were also proposed.

Recombinant antibodies by phage display for bioanalytical applications

Antibody phage display, aimed at preparing antibodies to defined antigens, is a useful replacement for hybridoma technology. The phage system replaces all work stages that follow animal immunization with simple procedures for manipulating DNA and bacteria. It enables the time needed to generate stable antibody-producing clones to be shortened considerably, making the process noticeably cheaper. Antibodies prepared by phage display undergo several affinity selection steps and can be used as selective receptors in biosensors. This article briefly describes the techniques used in the making of phage antibodies to various antigens. The possibilities and prospects are discussed of using phage antibodies as selective agents in analytical systems, including biosensors.

An ultrasensitive label-free electrochemical impedimetric immunosensor for vascular endothelial growth factor based on specific phage via negative pre-screening

As a vascular growth regulator, vascular endothelial growth factor (VEGF) exerts significant biological roles through specific binding to its receptors on the vascular endothelial cells. VEGF165 is generally referenced as a potential therapeutic target of many malignant tumors. In this study, a negative pre-screening strategy with structurally analogous members of VEGF121, VEGFC and VEGFD was first proposed for VEGF165 biopanning, aiming at significantly improving the specificity of the selected phage monoclones. Indirect ELISA experiment showed that the phage monoclone expressing peptide SPFLLRM demonstrates excellent affinity and specificity. Then a VEGF165 electrochemical impedimetric spectroscopy (EIS) immunosensor was constructed by above specific phage modified electrode. After optimizing the experimental conditions, the as-explored EIS immunosensor had a linear range of 0.5-1000 pg/mL with the limit of detection of 0.15 pg/mL VEGF165. In addition, the developed phage-based EIS immunosensor was applied to satisfactorily detect VEGF165 in human serum samples. Considering its ultra-sensitivity, good selectivity, batch reproducibility and stability, the screened selective phage-based EIS sensor is envisioned potential application in diagnosis and therapy.

Discovery of a Phage Peptide Specifically Binding to the SARS-CoV-2 Spike S1 Protein for the Sensitive Phage-Based Enzyme-Linked Chemiluminescence Immunoassay of the SARS-CoV-2 Antigen

The COVID-19 pandemic has led to a global crisis with devastating effects on public healthcare and the economy. Sensitive detection of SARS-CoV-2 is the key to diagnose and control its spread. The spike (S) protein is an abundant viral transmembrane protein and a suitable target protein for the selective recognition of SARS-CoV-2. Here, we report that with bovine serum albumin prescreening, a specific phage peptide targeting SARS-CoV-2 S1 protein was biopanned with the pIII phage display library. The identified phage #2 expressing the peptide (amino acid sequence: NFWISPKLAFAL) shows high affinity to the target with a dissociation constant of 3.45 ± 0.58 nM. Furthermore, the identified peptide shows good specificity with a binding site at the N-terminal domain of the S1 subunit through a hydrogen bond network and hydrophobic interaction, supported by molecular docking. Then, a sandwiched phage-based enzyme-linked chemiluminescence immunoassay (ELCLIA) was established by using phage #2 as a bifunctional probe capable of SARS-CoV-2 S1 antigen recognition and signal amplification. After optimizing the conditions, the proposed phage ELCLIA exhibited good sensitivity, and as low as 78 pg/mL SARS-CoV-2 S1 could be detected. This method can be applied to detect as low as 60 transducing units (TU)/mL SARS-CoV-2 pseudovirus in 50% saliva. Therefore, specific phage peptides have good prospects as powerful biological recognition probes for immunoassay detection and biomedical applications.

Simultaneous detection of dual biomarkers using hierarchical MoS2 nanostructuring and nano-signal amplification-based electrochemical aptasensor toward accurate diagnosis of prostate cancer

Accurate and reliable quantification of tumor biomarkers in clinical samples is of vital importance for early stage diagnosis and treatment of cancer. However, a poor specificity of prostate specific antigen (PSA) testing alone fostering overdetection and overtreatment, remains a great controversy in prostate cancer (PCa) screening. Here we report an electrochemical aptasensor using hierarchical MoS₂ nanostructuring and SiO₂ nano-signal amplification for simultaneous detection of dual PCa biomarkers, PSA and sarcosine, to enhance the diagnostic performance of PCa. In this strategy, hierarchical flower-like MoS₂ nanostructures as functional interface accelerated intermolecular accessibility and improved DNA hybridization efficiency. Moreover, the spherical SiO₂ nanoprobe that conjugated with both electroactive tags and DNA probes, allowed effective electrochemical signal amplification. By deliberately designing different hybridization modes, we individually implemented the optimization of PSA and sarcosine sensing system. Based on this, simultaneous determination of PSA and sarcosine was achieved, with limit of detection (LOD) down to 2.5 fg/mL and 14.4 fg/mL, respectively, as well as excellent selectivity. More importantly, using this approach, we could directly differentiate cancer patients with healthy ones for clinical serum samples. The ultrasensitive biosensor provides single-step analysis with simple operation and a small sample volume (∼12 μL), shedding new light on accurate diagnosis and early-detection of cancer in clinical applications.

Sensitive and selective "signal-off" electrochemiluminescence sensing of prostate-specific antigen based on an aptamer and molecularly imprinted polymer

Specific and sensitive determination of prostate-specific antigen (PSA) in complex real samples holds significant importance as it is an effective molecular biomarker for the clinical diagnosis of prostate cancer. Herein, we constructed a dual-recognition electrochemiluminescence (ECL) sensor based on both the recognition elements of an aptamer and molecularly imprinted polymers (MIP) for the selective and ultrasensitive determination of PSA. The aptamer was self-assembled on gold nanoparticle (AuNP) modified electrodes through Au-S bonds. Subsequently, a layer of MIP membrane was synthesized by electropolymerization of dopamine (DA) to fabricate an aptamer-MIP sensor. After the rebinding of PSA onto imprinted cavities, the ECL response of luminol in the solution decreased. This "signal-off" strategy was employed for PSA detection with a wide linear range and a low limit of detection of 5 pg mL^-1-50 ng mL^-1 and 3.0 pg mL^-1, respectively. Compared with individual aptamer sensors, the dual-recognition sensor showed higher specific recognition ability for the determination of PSA. Meanwhile, the good stability, reproducibility, and regenerability endowed the dual recognition sensor with favorable application value in early clinical diagnosis.

Carbon-based aerogels for biomedical sensing: Advances toward designing the ideal sensor

Carbon based aerogels are special solid-state materials comprised of interconnected networks of 3D nanostructures with high amount of air-filled nanoporous. They expand the structural properties along with physicochemical characteristics of nanoscale construction blocks to macroscale, and incorporate distinctive attributes of aerogels, like large surface area, high porosity, and low density, with particular features of the different constituents. These features impart aerogels with rapid response signal, high selectivity, and ultra-sensitivity for sensing diverse targets in biomedical media. This has prompted researchers to develop a variety of aerogel-based sensors with encouraging achievements. Hence, this work outlines sensing applications of aerogel-based sensors with a comprehensive overview on the carbon aerogel hybrid materials and their analytical performances. Authors tried to list advantages and limitations of the developed approach and introduced more potent research for possible devices designing. We also point out some challenges and future perspectives related to the improvement of high-efficiency aerogel-based sensors.

A photoelectrochemical biosensor based on methylene blue sensitized Bi5O7I for sensitive detection of PSA

Herein, bismuth oxyiodide (Bi₅O₇I) was used as a signal probe to construct an effective sensitization structure with methylene blue (MB), combined with protein conversion strategy, and a photoelectrochemical (PEC) biosensor was constructed for sensitive detection of prostate-specific antigen (PSA). The designed biosensor had a high sensitivity and a low detection limit (LOD) of 0.047 fg mL^-1, which opened up a simple way for the detection of PSA and showed a good application prospect in clinical and medical fields.

Tailoring the Photoelectrochemical Activity of Hexametaphosphate-Capped CdS Quantum Dots by Ca2+-Triggered Surface Charge Regulation: A New Signaling Strategy for Sensitive Immunoassay

The development of efficient signaling strategies is highly important for photoelectrochemical (PEC) immunoassay. We report here a new and efficient strategy for sensitive PEC immunoassay by tailoring the electrostatic interaction between the photoactive material and the electron donor. The photoelectric conversion of hexametaphosphate (HMP)-capped CdS quantum dots (QDs) in Na₂SO₃ solution is significantly boosted after Ca²⁺ incubation. The negative surface charges on CdS@HMP QDs decrease because of the complexation reaction between HMP and Ca²⁺, and the electrostatic repulsion between CdS@HMP QDs and electron donor (SO₃^2-) becomes weak accordingly, leading to an improved electron-hole separation efficiency. Inspired by the PEC response of CdS@HMP QDs to Ca²⁺, a novel "signal-on" PEC immunoassay platform is established by employing CaCO₃ nanoparticles as labels. By regulating the surface charge of CdS@HMP QDs with in situ-generated Ca²⁺ from CaCO₃ labels, sensitive detection of the carcinoembryonic antigen (CEA) is achieved. The linear detection range is 0.005-50 ng mL^-1 and the detection limit is 1 pg mL^-1 for CEA detection. Our work not only provides a facile route to tailor the photoelectric conversion but also lays the foundation for sensitive PEC immunoassay by simply regulating the surface charge of photoactive materials.

Phage display: an ideal platform for coupling protein to nucleic acid

Display technology, especially phage display technology, has been widely applied in many fields. The theoretical core of display technology is the physical linkage between the protein/peptide on the surface of a phage and the coding DNA sequence inside the same phage. Starting from phage-displayed peptide/protein/antibody libraries and taking advantage of the ever-growing power of next-generation sequencing (NGS) for DNA sequencing/decoding, rich protein-related information can easily be obtained in a high-throughput way. Based on this information, many scientific and clinical questions can be readily addressed. In the past few years, aided by the development of NGS, droplet technology, and massive oligonucleotide synthesis, we have witnessed and continue to witness large advances of phage display technology, in both technology development and application. The aim of this review is to summarize and discuss these recent advances.

Electrochemically Controlled ATRP for Cleavage-Based Electrochemical Detection of the Prostate-Specific Antigen at Femtomolar Level Concentrations

As a single-chain glycoprotein with endopeptidase activity, the prostate-specific antigen (PSA) is valuable as an informative serum marker in diagnosing, staging, and prognosis of prostate cancer. In this report, an electrochemical biosensor based on the target-induced cleavage of a specific peptide substrate (PSA peptide) is designed for the highly selective detection of PSA at the femtomolar level, using electrochemically controlled atom transfer radical polymerization (eATRP) as a method for signal amplification. The PSA peptides, without free carboxyl sites, are attached to the gold surface via the N-terminal cysteine residue. The target-induced cleavage of PSA peptides results in the generation of carboxyl sites, to which the alkyl halide initiator α-bromophenylacetic acid (BPAA) is linked via the Zr(IV) linkers. Subsequently, the potentiostatic eATRP of ferrocenylmethyl methacrylate (FcMMA, as the monomer) leads to the surface-initiated grafting of high-density ferrocenyl polymers. As a result, a large amount of Fc redox tags can be recruited for signal amplification, through which the limit of detection (LOD) for PSA can be down to 3.2 fM. As the recognition element, the PSA peptide is easy to synthesize, chemically and thermally stable, and low-cost. Without the necessity of enzyme or nanoparticle labels, the eATRP-based amplification method is easy to operate and low-cost. Results also show that the cleavage-based electrochemical PSA biosensor is highly selective and applicable to PSA detection in complex biological samples. In view of these merits, the integration of the eATRP-based amplification method into cleavage-based recognition is believed to hold great promise for the electrochemical detection of PSA in clinical applications.

Application of Phage-Displayed Peptides in Tumor Imaging Diagnosis and Targeting Therapy

Phage display is an effective and powerful technique that provides a route to discovery unique peptides targeting to tumor cells. Specifically binding peptides are considered as the valuable target directing molecule fragments with potential efficiency to improve the current tumor clinic, and offer new approaches for tumor prevention, diagnosis and treatment. We focus on the recent advances in the isolation of tumor-targeting peptides by biopanning methods, with particular emphasis on molecular imaging, and pharmaceutical targeting therapy.

Colorimetric Assay of Bacterial Pathogens Based on Co3O4 Magnetic Nanozymes Conjugated with Specific Fusion Phage Proteins and Magnetophoretic Chromatography

It is important to detect pathogens rapidly, sensitively, and selectively for clinical medicine, homeland security, food safety, and environmental control. We report here a specific and sensitive colorimetric assay that incorporated a bovine serum albumin-templated Co₃O₄ magnetic nanozyme (Co₃O₄ MNE) with a novel specific fusion phage protein and magnetophoretic chromatography to detect Staphylococcus aureus. The Co₃O₄ MNE was conjugated to S. aureus-specific fusion-pVIII (Co₃O₄ MNE@fusion-pVIII), screened from the S. aureus-specific phage AQTFLGEQD (the phage monoclone is denoted by the peptide sequence). The as-prepared triple-functional Co₃O₄ MNE@fusion-pVIII particles were capable of capturing S. aureus in sterile milk, which were then isolated from milk magnetically. Assisted by polyethylene glycol, the Co₃O₄ MNE@fusion-pVIII@S. aureus complex was separated from the free Co₃O₄ MNE@fusion-pVIII by magnetophoretic chromatography in an external magnetic field. After transferring the isolated Co₃O₄ MNE@fusion-pVIII@S. aureus complexes into a 96-well plate, diammonium salt of 2,2'-azino-bis(3-ethylbenzo-thiazoline-6-sulfonic acid) and H₂O₂ were added to develop color because of the peroxidase mimetics activity of the Co₃O₄ MNE. A S. aureus concentration within 10-10,000 cfu/mL in milk can be detected (detection limit: 8 cfu/mL). The as-developed method is simple, cost-efficient, and sensitive, which is useful for rapidly diagnosing pathogenic bacteria and helpful to prevent disease outbreaks induced by pathogens in developing countries.

A novel fluorescent assay based on DNAzyme-assisted detection of prostate specific antigen for signal amplification

Prostate specific antigen (PSA) is one of the most common biomarkers for the management of prostate cancer. However, it still remains urgent to develop highly sensitive, cost-effective and selective strategies for PSA assay. In this paper, we developed a low-cost, highly sensitive and specific analytical strategy for the detection of PSA by using a fluorescence sensor based on Pb²⁺-dependent DNAzyme. We designed a DNA sequence called cmMB with a hairpin structure, containing PSA-specific aptamers and Pb²⁺-dependent DNAzyme chains. Also, a fluorophore-labelled DNA sequence called Sub-FAM, which contains a cleavage site of Pb²⁺-dependent DNAzyme and serves as substrate, is also designed for the signal generation. In the presence of PSA, interaction between aptamer and PSA blocks the hairpin structure of cmMB, resulting in the formation of Pb²⁺-dependent DNAzyme with Pb²⁺. Then, Pb²⁺-dependent DNAzyme can cleavage Sub-FAM and produce a high fluorescence. In the absence of PSA, since Sub-FAM remains to be ssDNA and can be absorbed by GO, only low fluorescence can be detected. Under optimal experimental conditions, a good linear relationship in the range of 1-100 pg mL^-1 was exhibited, with a limit of detection (LOD) of 0.76 pg mL^-1. In addition, the proposed method has potential value in the diagnosis and monitoring of prostate cancer because of its good selectivity and practical application in biological samples.

Phage Display in the Quest for New Selective Recognition Elements for Biosensors

Phages are bacterial viruses that have gained a significant role in biotechnology owing to their widely studied biology and many advantageous characteristics. Perhaps the best-known application of phages is phage display that refers to the expression of foreign peptides or proteins outside the phage virion as a fusion with one of the phage coat proteins. In 2018, one half of the Nobel prize in chemistry was awarded jointly to George P. Smith and Sir Gregory P. Winter "for the phage display of peptides and antibodies." The outstanding technology has evolved and developed considerably since its first description in 1985, and today phage display is commonly used in a wide variety of disciplines, including drug discovery, enzyme optimization, biomolecular interaction studies, as well as biosensor development. A cornerstone of all biosensors, regardless of the sensor platform or transduction scheme used, is a sensitive and selective bioreceptor, or a recognition element, that can provide specific binding to the target analyte. Many environmentally or pharmacologically interesting target analytes might not have naturally appropriate binding partners for biosensor development, but phage display can facilitate the production of novel receptors beyond known biomolecular interactions, or against toxic or nonimmunogenic targets, making the technology a valuable tool in the quest of new recognition elements for biosensor development.

Tackling the Challenges of Enzymatic (Bio)Fuel Cells

The ever-increasing demands for clean and sustainable energy sources combined with rapid advances in biointegrated portable or implantable electronic devices have stimulated intensive research activities in enzymatic (bio)fuel cells (EFCs). The use of renewable biocatalysts, the utilization of abundant green, safe, and high energy density fuels, together with the capability of working at modest and biocompatible conditions make EFCs promising as next generation alternative power sources. However, the main challenges (low energy density, relatively low power density, poor operational stability, and limited voltage output) hinder future applications of EFCs. This review aims at exploring the underlying mechanism of EFCs and providing possible practical strategies, methodologies and insights to tackle these issues. First, this review summarizes approaches in achieving high energy densities in EFCs, particularly, employing enzyme cascades for the deep/complete oxidation of fuels. Second, strategies for increasing power densities in EFCs, including increasing enzyme activities, facilitating electron transfers, employing nanomaterials, and designing more efficient enzyme-electrode interfaces, are described. The potential of EFCs/(super)capacitor combination is discussed. Third, the review evaluates a range of strategies for improving the stability of EFCs, including the use of different enzyme immobilization approaches, tuning enzyme properties, designing protective matrixes, and using microbial surface displaying enzymes. Fourth, approaches for the improvement of the cell voltage of EFCs are highlighted. Finally, future developments and a prospective on EFCs are envisioned.

Rapid time-resolved luminescence based screening of bacteria in urine with luminescence modulating biosensing phages

Urinary tract infections (UTIs) are a common problem worldwide. The most prevalent causative pathogen of UTI is Escherichia coli, focus of this study. The current golden standard for detecting UTI is bacterial culture, creating a major workload for hospital laboratories - cost-effective and rapid mass screening of patient samples is needed. Here we present an alternative approach to screen patient samples with a single-step assay utilising time-resolved luminescence and luminescence modulating biosensing phages. Filamentous phage M13 was biopanned for binding luminescence quenching metal (copper) and further E. coli. The screening assay luminescence modulation was further enhanced by selecting right chemical environment for the functioning phage clones. Semi-specific interaction between phage, target bacteria and metal was detected by modulation in the signal of a weakly chelating, easily quenchable lanthanide complex. In the presence of the target pathogen, the phages collected quenching metal from solution to the bacterial surface changing the quenching effect on the lanthanide label and thus modulating the signal. Our method was compared with the bacterial culture data obtained from 70 patient samples. The developed proof-of-principle screening assay showed sensitivity and a specificity at the 90% mark when compared to culture method although some samples had high turbidity and even blood. The detection limit of E. coli was in the range of 1000-10 000 colony forming units/mL. Untreated urine sample was screened and time-resolved luminescence signal result was achieved within 10 min in a single incubation step.

A dual amplification electrochemical immunosensor based on HRP-Au@Ag NPs for carcinoembryonic antigen detection

A sensitive sandwich-type electrochemical immunosensor based on dual amplification strategy was constructed. The dual amplification strategy has been used secondary antibody(Ab₂)-horseradish peroxidase(HRP)-Au@Ag nanoparticles (Au@Ag NPs) for carcinoembryonic antigen(CEA) detection. Ab₂-HRP-Au@Ag NPs as dual amplification markers triggered the disproportionation of H₂O₂, which could facilitate the catalytic oxidation of hydroquinone to quinone(BQ). In addition, due to their large surface area and excellent conductivity, nitrogen-doped graphene were used as a platform to firmly assemble primary antibody (Ab₁). Above mentioned generated amout of BQ are corresponding to trace CEA, resulting in the highly electrochemical reduction signal. Under the optimal conditions, the linear range of CEA concentration was 0.0001-100 ng mL^-1, and the limit of detection (LOD) could be as low as 0.05 pg mL^-1. Importantly, the immunosensor also showed acceptable stability, reproducibility and selectivity.

A novel fluorescence immunosensor based on Förster resonance energy transfer between nitrogen and sulfur co-doped carbon dot functionalized silica nanospheres and Au@Ag NPs

A fluorescence immunosensor for PSA detection was developed based on the FRET between Si/NS-CDs and Au@Ag NPs.

Selected landscape phage probe as selective recognition interface for sensitive total prostate-specific antigen immunosensor

The level of total prostate-specific antigen (t-PSA) is generally known as the key index of prostate cancer. Here, phage probes against t-PSA were selected from f8/8 landscape phage library. After three rounds of biopanning, four t-PSA-binding phage clones were isolated and identified by the DNA sequencing. Based on the phage capture assay, the phage clone displaying the fusion peptide ATRSANGM showed highest affinity and specificity against t-PSA. Subsequently, the t-PSA-specific phage was used as t-PSA capture probe in a sandwich enzyme-linked immunosorbent assay (ELISA) and differential pulse voltammetry (DPV) assay systems. Both assay methods showed high specificity and acceptable reliability for real serum samples analysis. By comparison, DPV method showed wider linear range (0.01-100 ng mL^-1) and lower limit of detection (3 pg mL^-1) than those (3.3-330 ng mL^-1 and 1.6 ng mL^-1) of ELISA. Moreover, DPV system showed smaller distinction to the authoritative method in real samples assay. Excitingly, the phage probe based DPV immunosensor showed high sensitivity for the detection of t-PSA and LOD achieved the pg mL^-1 level, which was far lower than those values (usually above 0.1 ng mL^-1) for reported immunosensors based on antibodies. Due to the biocompatibility, multivalency, stability, and high structural homogeneity, the t-PSA-specific landscape phage demonstrates as a novel specific interface in biosensors.

Target-triggered signal-on ratiometric electrochemiluminescence sensing of PSA based on MOF/Au/G-quadruplex

Signal-amplified ratiometric electrochemiluminescence (Sa-RECL) provides an attractive approach to maximize signal-to-noise ratio through enhancing signals and eliminate interferences. In this work, we prepared a novel metal-organic framework (MOF)/Au/G-quadruplex as both quenchers and enhancers to fabricate a target-triggered ratiometric ECL sensor for high sensitive and accurate detection of prostatic specific antigen (PSA). The ratiometric ECL sensor using the dual-potential-dependent ECL emitters (quantum dots (QDs) and luminol) and MOF/Au/G-quadruplex not only achieved signal self-calibration but also realized cooperative amplification. After the sequential hybridization among of complementary DNA-QDs, PSA aptamer and pDNA-Au-Hemin-MIL-DNAzyme and the further competition of PSA, the pDNA-Au-Hemin-MIL-DNAzyme probe would keep away from the electrode surface, causing a switchover of their ECL signals from "off-on" state to "on-off" state. The ratiometric ECL aptasensor exhibits high-sensitive and accurate analytical performance toward PSA with a linear detection range from 0.5 to 500 ng mL^-1 and a detection limit of 0.058 ng mL^-1 (S/N = 3). The novel ratiometric ECL biosensor has been successfully applied to determine different serum samples of PSA, indicating its potential application in the clinical diagnosis.

Landscape Phage: Evolution from Phage Display to Nanobiotechnology

The development of phage engineering technology has led to the construction of a novel type of phage display library-a collection of nanofiber materials with diverse molecular landscapes accommodated on the surface of phage particles. These new nanomaterials, called the "landscape phage", serve as a huge resource of diagnostic/detection probes and versatile construction materials for the preparation of phage-functionalized biosensors and phage-targeted nanomedicines. Landscape-phage-derived probes interact with biological threat agents and generate detectable signals as a part of robust and inexpensive molecular recognition interfaces introduced in mobile detection devices. The use of landscape-phage-based interfaces may greatly improve the sensitivity, selectivity, robustness, and longevity of these devices. In another area of bioengineering, landscape-phage technology has facilitated the development and testing of targeted nanomedicines. The development of high-throughput phage selection methods resulted in the discovery of a variety of cancer cell-associated phages and phage proteins demonstrating natural proficiency to self-assemble into various drug- and gene-targeting nanovehicles. The application of this new "phage-programmed-nanomedicines" concept led to the development of a number of cancer cell-targeting nanomedicine platforms, which demonstrated anticancer efficacy in both in vitro and in vivo experiments. This review was prepared to attract the attention of chemical scientists and bioengineers seeking to develop functionalized nanomaterials and use them in different areas of bioscience, medicine, and engineering.

Ultrasensitive colorimetric immunoassay for hCG detection based on dual catalysis of Au@Pt core-shell nanoparticle functionalized by horseradish peroxidase

In this paper, an ultrasensitive colorimetric biosensor for human chorionic gonadotrophin (hCG) detection was designed from bottom-up method based on the dual catalysis of the horseradish peroxidase (HRP) and Au@Pt nanoparticles (NPs) relative to H₂O₂-TEM system. HRP and monoclonal mouse anti-hCG antibody (β-submit, mAb₁) were co-immobilized onto the Au@Pt NP surface to improve catalytic efficiency and specificity, which formed a dual functionalized Au@Pt-HRP probe with the mean size of 42.8nm (D₅₀). The colorimetric immunoassay was developed for the hCG detection, and the Au@Pt-HRP probe featured a higher sensitivity in the concentration range of 0.4-12.8IUL^-1 with a low limit of detection (LOD) of 0.1IUL^-1 compared with the LODs of 0.8IUL^-1 for BA-ELISA and of 2.0IUL^-1 for Au@Pt, which indicated that the Au@Pt-HRP probe possessed higher catalytic efficiency with 2.8-fold increase over Au@Pt and 33.8-fold increase over HRP. Also, the Au@Pt-HRP probe exhibited good precision and reproducibility, high specificity and acceptable accuracy with CV being less than 15%. The dual functionalized Au@Pt-HRP probe as a type of signal amplified method was firstly applied in the colorimetric immunoassay for the hCG detection.

Sensitive colorimetric immunoassay of Vibrio parahaemolyticus based on specific nonapeptide probe screening from a phage display library conjugated with MnO2 nanosheets with peroxidase-like activity

Pathogen detection continues to receive significant attention due to the harmful effects of pathogens on public health. Herein, specific nonapeptide-fusion proteins pVIII (pVIII fusion) were isolated from phage VQTVQIGSD (designated by the sequence of a fused foreign peptide), which was specifically screened from the f8/9 landscape phage library against Vibrio parahaemolyticus (V. parahaemolyticus) in a high-throughput way. The as-prepared V. parahaemolyticus-specific recognition element is cheaper and more available than antibodies. Further, a highly sensitive colorimetric immunoassay for V. parahaemolyticus was established using pVIII fusion as capture probes coupled with protein-templated MnO₂ nanosheets (NSs) as signal probes. In the presence of a target bacterium, V. parahaemolyticus, a sandwich-type complex of pVIII fusion-V. parahaemolyticus-MnO₂ NS@pVIII fusion was formed through specific recognition of pVIII fusion and V. parahaemolyticus. The signal probes (MnO₂ NSs) could catalyze the reaction of 3,3',5,5'-tetramethylbenzidine and H₂O₂ to generate a colorimetric change. The proposed V. parahaemolyticus detection method demonstrated a wide detection range (20-10⁴ colony-forming units (CFU) mL^-1), low limit of detection (15 CFU mL^-1), excellent selectivity, and high reliability for real marine samples, showing potential application in marine microbiological detection and control.

Functional polymer materials affecting cell attachment

This review discusses the functional polymer materials effect on the cell adhesion. The applied polymer materials for the cell adhesion purpose was prepared based on organic fibers and biocompatible hydrogel. On the other hand, the active peptides are incorporated into the polymer materials substrate via the cysteine-containing peptides and N-hydroxysuccinimide-active group. Cancer cells and normal cells were presented for the selective adhesion via the introduced polymer materials substrate containing active peptides including Arginine-Glycine-Aspartic and Isoleucine-Lysine-Valine-Alanine-Valine sequence peptides. This selectivity is revealed by a significant cooperativity between specific and non-specific cell adhesion. This study is of a great impact for the design of the polymeric structures for cell attachment.

3D Nanostructured Palladium-Functionalized Graphene-Aerogel-Supported Fe3O4 for Enhanced Ru(bpy)32+-Based Electrochemiluminescent Immunosensing of Prostate Specific Antigen

We developed a novel Ru(bpy)₃²⁺-based electrochemiluminescence (ECL) immunosensor utilizing palladium nanoparticle (Pd NP)-functionalized graphene-aerogel-supported Fe₃O₄ (FGA-Pd) for real-sample analysis of prostate specific antigen (PSA). 3D nanostructured FGA-Pd, as a novel ECL carrier, was prepared by in situ reduction. Large amounts of Ru(bpy)₃²⁺ could combine with FGA-Pd via electrostatic interaction to establish a brand-new ECL emitter (Ru@FGA-Pd) for improving ECL efficiency. The obtained Ru@FGA-Pd composite was utilized to label the secondary antibody, which generated strong ECL signals with tripropylamine (TPrA) as a coreactant. Furthermore, we demonstrated that the participation of Pd NPs endowed FGA with favorable electrocatalytic ability in the luminescence process to produce more excited state [Ru(bpy)₃²⁺]* for realizing desirable signal amplification. In addition, the primary antibody was captured by gold nanoparticle (Au NP)-functionalized Fe₂O₃ nanodendrites (Au-FONDs), which possessed good electrical conductivity and favorable biocompatibility. Under optimum conditions, the fabricated sandwich-type ECL immunosensor showed a sensitive response to PSA with a low detection limit of 0.056 pg/mL (S/N = 3) and a calibration range of 0.0001-50 ng/mL. Featuring favorable selectivity, stability, and repeatability, the proposed immunosensor is expected to blaze a novel trail for the real sample detection of PSA and other biomarkers.

Discovery of a polystyrene binding peptide isolated from phage display library and its application in peptide immobilization

Phage peptide display is a powerful technique for discovery of various target-specific ligands. However, target-unrelated peptides can often be obtained and cause ambiguous results. Peptide PB-TUP has been isolated repeatedly in our laboratory on different targets and we conducted a research on PB-TUP phage to investigate their binding properties and rate of propagation. ELISA and phage recovery assay demonstrated that PB-TUP phage had a significant superior affinity to polystyrene solid surface compared with control phage clones. In this study, some incidental bindings are excluded like blocking agents and non-specific binding of secondary antibodies. Propagation rate assays of the selected phage clones showed that the growth rate of PB-TUP phage was not superior to the control phages. Furthermore, the binding of PB-TUB to polystyrene was concentration dependent and varied with solution pH. Molecular modeling revealed that stable structures of α-helix and β-turn may contribute to the binding of PB-TUP to polystyrene plate. The PB-TUP sequence was fused to the N-terminus of peptide P2 and the fusion peptide significantly increased the binding affinity to polystyrene. The fusion peptide also enhanced the cell adhesion ability of peptide P2 with human umbilical vein endothelial cell (HUVEC). The addition of the polystyrene binding peptide provided a convenient method for peptide immobilization.

An ultrasensitive electrochemical immunosensor for the detection of prostate-specific antigen based on conductivity nanocomposite with halloysite nanotubes

A sensitive label-free amperometric electrochemical immunosensor for detection of prostate-specific antigen (PSA) was proposed in this work. The nanocomposite of halloysite nanotubes with polypyrrole shell and palladium nanoparticles (HNTs@PPy-Pd) was used as a novel signal label. The HNTs with adequate hydroxyl groups are economically available raw materials. PPy, as an electrically conducting polymer material, can be absorbed to the surface of HNTs by in situ oxidative polymerization of the pyrrole monomer and form a shell on the HNTs. The shell of PPy could not only improve the conductivity of the nanocomposite but also absorb large amounts of Pd nanoparticles (NPs). The Pd NPs with high electrocatalytic activity toward the reduction of H₂O₂ and the HNTs@PPy-Pd nanocomposite as the analytical signal label could improve the sensitivity of the immunosensor. Under optimal conditions, the immunosensor showed a low detection limit (0.03 pg/mL) and a wide linear range (0.0001 to 25 ng/mL) of PSA. Moreover, its merits such as good selectivity, acceptable reproducibility, and stability indicate that the fabricated immunosensor has a promising application potential in clinical diagnosis. Graphical Abstract A new label-free amperometric electrochemical immunosensor based on HNTs@PPy-Pd nanocomposite for quantitative detection of PSA.

Highly Uniform Gold Nanobipyramids for Ultrasensitive Colorimetric Detection of Influenza Virus

Gold nanoparticles (AuNPs) have been frequently utilized for the construction of diverse colorimetric biosensors. Normally, AuNPs with sharp edges could have better sensitivity. However, the poor monodipersity of AuNPs with sharp edges seriously confines their utility for colorimetric biosensing. Herein, we demonstrate the utility of highly uniform gold nanobipyramids (Au NBPs) for ultrasensitive colorimetric detection of H₅N₁ virus. The proposed method is based on the fact that alkaline phosphatase (ALP) could catalyze the decomposition of 4-aminophenyl phosphate (4-APP) to generate 4-aminophenol (4-AP), which would then reduce silver nitrate to metal silver and then deposited on Au NBPs. The metal silver shell coated on the Au NBPs changed the refractive index of gold and thus resulted in a blue shift of longitudinal localized surface plasmon resonance (LSPR) and accompanied a vivid color change. This method exhibited a higher sensitivity than that of other Au NPs such as gold nanorods due to the high-index-faceted on the tips of the Au NBPs. This method was used to detect the activity of ALP. It exhibited a linear range of 0.1-5 mU/mL with a limit of detection (LOD) of 0.086 mU/mL. Finally, the proposed method was used in immunoassay to detect H₅N₁ virus. The results showed that the corresponding linear range for the detection of H₅N₁ virus antigen was 0.001-2.5 ng/mL, and the LOD was determined to be 1 pg/mL, which is more sensitive than those in most of the colorimetric biosensors reported previously.

An efficient strategy to synthesize a multifunctional ferroferric oxide core@dye/SiO2@Au shell nanocomposite and its targeted tumor theranostics

Regular spheric magnetic ferroferric oxide nanoclusters have been developed and used for the targeted photothermal therapy of colorectal cancer cells after conjugation with SW620-specific phage fusion proteins.

All-in-one dual-aptasensor capable of rapidly quantifying carcinoembryonic antigen

Using a dual DNA aptamer (CEA aptamer linked to hemin aptamer), capable of rapidly capturing carcinoembryonic antigen (CEA) and hemin, an all-in-one dual-aptasensor with 1,1'-oxalyldiimidazole (ODI) chemiluminescence detection was developed for the early diagnosis of human cancer. CEA and hemin competitively bound with the dual DNA aptamer while the mixture in a detection cell was incubated for 30min at room temperature. When Amplex Red and H₂O₂ were added in the detection cell after the incubation, the yield of resorufin formed from the reaction Amplex Red and H₂O₂ depended on the concentration of HRP-mimicking G-quardruplex DNAzyme formed from the binding interaction between hemin and the dual DNA aptamer. Bright red light was observed with the addition of ODI and H₂O₂ in the detection cell containing resorufin. Relative CL intensity of all-in-one dual-aptasensor, operated with the competitive reaction of CEA and hemin in the presence of the dual aptamer, was exponentially decreased with the increase of CEA concentration in human serum. The limit of detection (LOD=3σ) of the all-in-one dual-aptasensor which operated with excellent accuracy, precision, and reproducibility was as low as 0.58ng/ml. The good correlation between the easy to use all-in-one dual-aptasensor and conventional enzyme-linked immunosorbent assay (ELISA), operated with time consuming procedures (e.g., long incubations and multiple washings), indicates that the rapid all-in-one dual-aptasensor can be applied as a novel clinical tool for the early diagnosis of breast cancer.