Highly Permselective Membrane Surface Modification by Cold Plasma-Induced Grafting Polymerization of Molecularly Imprinted Polymer for Recognition of Pyrethroid Insecticides in Fish

Dummy Template-Based Molecularly Imprinted Membrane Coating for Rapid Analysis of Malachite Green and Its Metabolic Intermediates in Shrimp and Fish

A novel malachite green molecularly imprinted membrane (MG-MIM) with specific selectivity for malachite green (MG) and leucomalachite green (LMG) was prepared using a hydrophobic glass fiber membrane as the polymer substrate, methyl violet as a template analog, 4-vinyl benzoic acid as the functional monomer, and ethyleneglycol dimethacrylate as the crosslinking agent. MG-MIM and non-imprinted membrane (NIM) were structurally characterized using scanning electron microscopy, surface area analyzer, Fourier-transform infrared spectrometer and synchronous thermal analyzer. The results showed that MG-MIM possessed a fluffier surface, porous and looser structure, and had good thermal stability. Adsorption properties of MG-MIM were investigated under optimal conditions, and adsorption equilibrium was reached in 20 min. The saturated adsorption capacities for MG and LMG were 24.25 ng·cm^-2 and 13.40 ng·cm^-2, and the maximum imprinting factors were 2.41 and 3.20, respectively. Issues such as "template leakage" and "embedding" were resolved. The specific recognition ability for the targets was good and the adsorption capacity was stable even after five cycles. The proposed method was successfully applied for the detection of MG and LMG in real samples, and it showed good linear correlation in the range of 0 to 10.0 μg·L^-1 (R² = 0.9991 and 0.9982), and high detection sensitivity (detection limits of MG and LMG of 0.005 μg/kg and 0.02 μg·kg^-1 in shrimp, and 0.005 μg/kg and 0.02 μg/kg in fish sample). The recoveries and relative standard deviations were in the range of 76.31-93.26% and 0.73-3.72%, respectively. The proposed method provides a simple, efficient and promising alternative for monitoring MG and LMG in aquatic products.

Green Chemistry and Molecularly Imprinted Membranes

Technological progress has made chemistry assume a role of primary importance in our daily life. However, the worsening of the level of environmental pollution is increasingly leading to the realization of more eco-friendly chemical processes due to the advent of green chemistry. The challenge of green chemistry is to produce more and better while consuming and rejecting less. It represents a profitable approach to address environmental problems and the new demands of industrial competitiveness. The concept of green chemistry finds application in several material syntheses such as organic, inorganic, and coordination materials and nanomaterials. One of the different goals pursued in the field of materials science is the application of GC for producing sustainable green polymers and membranes. In this context, extremely relevant is the application of green chemistry in the production of imprinted materials by means of its combination with molecular imprinting technology. Referring to this issue, in the present review, the application of the concept of green chemistry in the production of polymeric materials is discussed. In addition, the principles of green molecular imprinting as well as their application in developing greenificated, imprinted polymers and membranes are presented. In particular, green actions (e.g., the use of harmless chemicals, natural polymers, ultrasound-assisted synthesis and extraction, supercritical CO2, etc.) characterizing the imprinting and the post-imprinting process for producing green molecularly imprinted membranes are highlighted.

Nickel oxide@nickel-graphene quantum dot self-healing hydrogel for colorimetric detection and removal of lambda-cyhalothrin in kumquat

Detection and removal of pesticide residues in fruit and vegetable are important to ensure human health, but the current methods face challenges in sensitivity, specificity and convenience of use. The...

A microtitre chemiluminescence sensor for detection of pyrethroids based on dual-dummy-template molecularly imprinted polymer and computational simulation

The residues of pyrethroids in foods of animal origin are dangerous to the consumers, so this study presented a chemiluminescence sensor for determination of pyrethroids in chicken samples. A dual-dummy-template molecularly imprinted polymer capable of recognizing 10 pyrethroids was synthesized. The results of computation simulation showed that the specific 3D conformations of the templates had important influences on the polymer' recognition ability. The polymer was used to prepare a sensor on conventional 96-well microplates, and the sample solution was added into the wells for direct absorption. The absorbed analytes were initiated with the bis(2,4,6-trichlorophenyl)oxalate-H₂ O₂ -imidazole system, and the chemiluminescence intensity was used for analyte quantification. Results showed that one assay was finished within 12 min, and this sensor could be reused four times. The limits of detection for the 10 analytes were in the range o0.3-6.0 pg/ml, and the recoveries from the standards of fortified blank chicken samples were in the range 70.5-99.7%.

Recent advancements in the application of non-thermal plasma technology for the seafood industry

Non-thermal plasma (NTP) is one of the most promising minimal processing methods for the food industry. However up until recently there are limited studies which would report the application and effect of NTP on processed seafood. The objective of this review is to highlight the recent findings and advancements in the application of NTP within the fish and other seafood industry, including direct application of fresh and dried fish and seafood with as well as indirect application of plasma activated water and seafood industry wastewater purification. The article also summarizes the effect of plasma treatment on microbiological quality, physicochemical and sensory properties and oxidation rate of treated fish and seafood. NTP has high potential to be used within various fields of seafood industry. It is especially effective in treatment of dried seafood products, but the use of plasma activated water during various processing steps such as seafood washing could be also beneficial. Moreover NTP could also be used as a cost effective and environmentally friendly method for seafood wastewater purification.

Newest applications of molecularly imprinted polymers for extraction of contaminants from environmental and food matrices: A review

This paper presents an overview of the recent applications of molecularly imprinted polymers (MIPs) to sample preparation. The review is thought to cover analytical procedures for extraction of contaminants (mainly illegal/noxious organic compounds) from food and environmental matrices, with a particular focus on the various pre-concentration/cleanup techniques, that is offline and online solid-phase extraction (SPE), dispersive SPE (d-SPE), magnetic SPE (MSPE), solid-phase microextraction (SPME) and stir-bar sorptive extraction (SBSE), applied before instrumental quantification. The selectivity and extraction efficiency of MIP-based sorbent phases are critically discussed, also in relation to the physical-chemical properties resulting from the synthetic procedures. A variety of molecularly imprinted sorbents is presented, including hybrid composites embedding carbon nanomaterials and ionic liquids. The analytical performance of MIP materials in sample preparation is commented as function of the complexity of the matrix, and it is compared to that exhibited by (commercial) aspecific and/or immunosorbent phases.

Polyethyleneimine-facilitated high-capacity boronate affinity membrane and its application for the adsorption and enrichment of cis-diol-containing molecules

High capacity boronate affinity membranes were prepared for the first time, the membranes possess good selectivity, faster adsorption and desorption speed towards cis-diol-containing molecules.

Development of hydrophilic magnetic molecularly imprinted polymers by directly coating onto Fe3O4 with a water-miscible functional monomer and application in a solid-phase extraction procedure for iridoid glycosides

Development of hydrophilic magnetic molecularly imprinted polymers by directly coating onto Fe₃O₄ with a water-miscible functional monomer and application in a solid-phase extraction procedure for iridoid glycosides.

Water-compatible molecularly imprinted polymers for selective solid phase extraction of dencichine from the aqueous extract of Panax notoginseng

Specific molecularly imprinted polymers for dencichine were developed for the first time in this study by the bulk polymerization using phenylpyruvic acid and dl-tyrosine as multi-templates. The photographs confirmed that molecularly imprinted polymers prepared using N,N'-methylene diacrylamide as cross-linker and glycol dimethyl ether as porogen displayed excellent hydrophilicity. Selectivity, adsorption isotherm and adsorption kinetics were investigated. The sample loading-washing-eluting solvent was optimized to evaluate the property of molecularly imprinted solid phase extract. Compared with LC/WCX-SPE, water-compatible molecularly imprinted solid phase extraction displayed more excellent specific adsorption performance. The extracted dencichine from Panax notoginseng with the purity of 98.5% and the average recovery of 85.6% (n=3) was obtained.

Superhydrophilic molecularly imprinted polymers based on a water-soluble functional monomer for the recognition of gastrodin in water media

In this study, the first successfully developed superhydrophilic molecularly imprinted polymers (MIPs) for gastrodin recognition have been described. MIPs were prepared via the bulk polymerization process in an aqueous solution using alkenyl glycosides glucose (AGG) as the water-soluble functional monomer. The non-imprinted polymers (NIPs) were also synthesized using the same method without the use of the template. The dynamic water contact angles and photographs of the dispersion properties confirmed that the molecularly imprinted polymers displayed excellent superhydrophilicity. The results demonstrated that the MIPs exhibited high selectivity and an excellent imprinting effect. A molecularly imprinted solid phase extraction (MISPE) method was established. Optimization of various parameters affecting MISPE was investigated. Under the optimized conditions, a wide linear range (0.001-100.0μgmL(-1)) and low limits of detection (LOD) and quantification (LOQ) (0.03 and 0.09ngmL(-1), respectively) were achieved. When compared with the NIPs, higher recoveries (90.5% to 97.6%) of gastrodin with lower relative standard deviations values (below 6.4%) using high performance liquid chromatography were obtained at three spiked levels in three blank samples. These results demonstrated one efficient, highly selective and environmentally-friendly MISPE technique with excellent reproducibility for the purification and pre-concentration of gastrodin from an aqueous extract of Gastrodia elata roots.

Amine Enrichment of Thin-Film Composite Membranes via Low Pressure Plasma Polymerization for Antimicrobial Adhesion

Thin-film composite membranes, primarily based on poly(amide) (PA) semipermeable materials, are nowadays the dominant technology used in pressure driven water desalination systems. Despite offering superior water permeation and salt selectivity, their surface properties, such as their charge and roughness, cannot be extensively tuned due to the intrinsic fabrication process of the membranes by interfacial polymerization. The alteration of these properties would lead to a better control of the materials surface zeta potential, which is critical to finely tune selectivity and enhance the membrane materials stability when exposed to complex industrial waste streams. Low pressure plasma was employed to introduce amine functionalities onto the PA surface of commercially available thin-film composite (TFC) membranes. Morphological changes after plasma polymerization were analyzed by SEM and AFM, and average surface roughness decreased by 29%. Amine enrichment provided isoelectric point changes from pH 3.7 to 5.2 for 5 to 15 min of plasma polymerization time. Synchrotron FTIR mappings of the amine-modified surface indicated the addition of a discrete 60 nm film to the PA layer. Furthermore, metal affinity was confirmed by the enhanced binding of silver to the modified surface, supported by an increased antimicrobial functionality with demonstrable elimination of E. coli growth. Essential salt rejection was shown minimally compromised for faster polymerization processes. Plasma polymerization is therefore a viable route to producing functional amine enriched thin-film composite PA membrane surfaces.