Label-Free Sugar Detection Using Phenylboronic Acid-Functionalized Piezoresistive Microcantilevers

Boronate-Affinity Cross-Linking-Based Ratiometric Electrochemical Detection of Glycoconjugates

Despite the widespread application of the boronate-affinity cross-linking (BAC) in the separation, enrichment, and sensing of glycoconjugates, it remains a huge challenge to integrate the BAC into the selective electrochemical detection of glycoconjugates due to the poor selectivity of the BAC. Herein, we demonstrate a BAC-based ratiometric electrochemical method for the simple, low-cost, and highly sensitive and selective detection of glycoconjugates. Briefly, the methylene blue (MB)-tagged nucleic acid aptamer is exploited as the recognition element to selectively capture target glycoconjugate, to which a large number of ferrocene (Fc) tags are subsequently labeled via the BAC between the phenylboronic acid (PBA) group and the cis-diol site of the oligosaccharide chains on the captured targets. Using the MB tag as the internal reference and the Fc tag as the reporter of the target capture, the dual-signal output enables the ratiometric detection. Due to the presence of a high density of the cis-diol sites on a glycoconjugate, sufficiently high sensitivity can be obtained even without using any amplification strategies. Using glycoprotein mucin 1 (MUC1) as the model target, the signal ratio (I_Fc/I_MB) exhibits good linearity over the range from 0.05 to 50 U/mL, with a detection limit of 0.021 U/mL. In addition to the high sensitivity and selectivity, the results of the analysis of MUC1 in serum samples are acceptable. By virtue of its simplicity, cost-effectiveness, and high robustness and reproducibility, this BAC-based ratiometric electrochemical method holds great promise in the highly sensitive and selective detection of glycoconjugates.

Selective Separation and Analysis of Catecholamines in Urine Based on Magnetic Solid Phase Extraction by Mercaptophenylboronic Acid Functionalized Fe3O4-NH2@Au Magnetic Nanoparticles Coupled with HPLC

A novel magnetic solid phase extraction based on mercaptophenylboronic acid (MPBA)-functionalized Fe3O4-NH2@Au nanomaterial (Fe3O4-NH2@Au-MPBA) was developed for selective separation and enrichment of catecholamines (including dopamine, norepinephrine and adrenaline). Fe3O4-NH2@Au-MPBA nanoparticles were achieved by self-assembly-anchoring MPBA molecules on the surface of Fe3O4-NH2@Au nanocomposites, which were synthesized via a facial ultrasonic auxiliary in situ reduction process. The interaction between cis-diol from catecholamines and boronic acid was reversible and could be flexibly controlled by adjusting pH value. The catecholamines could be quickly adsorbed by Fe3O4-NH2@Au-MPBA in weak alkaline solution (pH 8.0–9.0) and subsequently released in acid solution (pH 1.0–2.0). The process of adsorption and dissociation was very fast. Furthermore, the three catecholamines could be detected in urine from children by high performance liquid chromatography (HPLC) with electrochemical detector. Under optimal conditions, norepinephrine (NE), epinephrine (EP) and dopamine (DA) were separated very well from internal standard and exhibited a good linearity in the range of 2.5–500.0 ng mL−1, with correlation coefficients of r2 > 0.9907. Limits of detection (LOD) (signal to noise = 3) were 0.39, 0.27 and 0.60 ng mL−1 for NE, EP and DA, respectively. Recoveries for the spiked catecholamines were in the range of 85.4–105.2% with the relative standard deviation (RSD) < 11.5%.

Passive and wireless, implantable glucose sensing with phenylboronic acid hydrogel-interlayer RF resonators

A phenylboronic acid-based, hydrogel-interlayer Radio-Frequency (RF) resonator is demonstrated as a highly-responsive, passive and wireless sensor for glucose monitoring. Constructs are composed of unanchored, capacitively-coupled split rings interceded by glucose-responsive hydrogels. Phenylboronic acid-hydrogels exhibit volumetric and dielectric variations in response to environmental glucose concentrations-these are efficiently converted to large shifts in the resonant response of interlayer-RF sensors. These tiny, stretchable and scalable sensors (5 mm × 5 mm x 250 μm) require no microelectronics or power at the sensing node and can be read-out remotely via near-field coupling. Sensors exhibit high sensitivities (~10% shift in resonant frequency-corresponding to 50 MHz-per 150 mg/dL of glucose), possess a limit of detection of 10 mg/dL, and a step response time of approximately 1 h to abrupt shifts in carbohydrate concentration. Notably, these sensors exhibited no signal drift or hysteresis over the time periods characterized herein (45 days at room temperature). We transform sensors into bioelectronic RF reporter-tags via the attachment of a single LED-these remotely report on glucose concentration via emitted light. We anticipate the non-degradative, long-term nature of both RF read-out and phenylboronic acid-based hydrogels will enable biosensors capable of long-term, remote read-out of glucose.

Surface-enhanced Raman spectroscopy study on the structure changes of 4-Mercaptophenylboronic Acid under different pH conditions

4-Mercaptophenylboronic Acid (4-MPBA) plays pivotal role in various fields. The orientation and existing form of the 4-MPBA strongly depend on the pH value of the media. The general aim of this work is to obtain information about the structure changes of 4-MPBA absorbed on Ag nanoparticles in different pH environment. Surface-enhanced Raman spectroscopy (SERS) technique is a simple and rapid method to study adsorption phenomena at molecule level. The investigation is done by means of SERS. In order to interpret the experimental information, a series of SERS spectra is carried out. The relative intensities of the totally symmetric (a₁ mode) and non-totally symmetric (b₂ mode) bands in the SERS spectra of 4-MPBA change depend on the environmental pH values, which is a manifestation of charge transfer (CT) processes. The degree of charge transfer increases with the pH value of the media changing from acidity to alkalinity. The structure changes of MPBA had been carried out in different pH environment. We envision that this approach will be of great significance in related fields of 4-MPBA-involved detection.

Localized Surface Plasmon Resonance (LSPR)-Coupled Fiber-Optic Nanoprobe for the Detection of Protein Biomarkers

Here is presented a miniaturized, fiber-optic (FO) nanoprobe biosensor based on the localized surface plasmon resonance (LSPR) at the reusable dielectric-metallic hybrid interface with a robust, gold nano-disk array at the fiber end facet. The nanodisk array is directly fabricated using electron beam lithography (EBL) and metal lift-off process. The free prostate-specific antigen (f-PSA) has been detected with a mouse anti-human prostate-specific antigen (PSA) monoclonal antibody (mAb) as a specific receptor linked with a self-assembled monolayer (SAM) at the LSPR-FO facet surfaces. Experimental investigation and data analysis found near field refractive index (RI) sensitivity at ~226 nm/RIU with the LSPR-FO nanoprobe, and demonstrated the lowest limit of detection (LOD) at 100 fg/mL (~3 fM) of f-PSA in PBS solutions. The SAM shows insignificant nonspecific binding to the target biomarkers in the solution. The control experimentation using 5 mg/mL bovine serum albumin in PBS and nonspecific surface test shows the excellent specificity and selectivity in the detection of f-PSA in PBS. These results indicate important progress toward a miniaturized, multifunctional fiber-optic technology that integrates informational communication and sensing function for developing a high-performance, label-free, point-of-care (POC) device.

Determination of Glycoproteins by a Self-Assembled 4-Mercaptophenylboronic Acid Film on a Quartz Crystal Microbalance

Glycosylation plays an important part in many biological processes. However, many glycoproteins are either of low abundance or covered by other components in biological samples. Hence, developing new methods to measure the glycoproteins with both high efficiency and low detection limit is important. In this work, a self-assembled 4-mercaptophenylboronic acid film was coated on a quartz crystal microbalance chip. By optimizing the reaction time and the concentration of 4-mercaptophenylboronic acid, a sensor that specifically responded to glycoproteins was created. Then, several parameters for the prepared sensor were investigated and the working curve for representative glycoprotein-transferrin was established. The linearity range was from 50 to 400 ng/mL and the detection limit was 21.0 ng/mL. The sensor was used to detect transferrin in artificial urine samples. This sensor has a low detection limit of glycoproteins requiring only a small amount of samples, and thus has potential applications in both pharmaceutical and medical areas.

Nanomechanical Sensors

This chapter introduces nanomechanical sensors and their applications. All molecules have “volume” and “mass.” Direct measurement of these fundamental parameters can realize label-free and real-time measurements. Nanomechanical sensors have been emerging as a key device for such label-free and real-time measurements with their multiple operation modes; static and dynamic modes for detecting volume- and mass-related features, respectively. A cantilever array sensor is a representative example among various geometries, while structural optimization can enhance the scope of nanomechanical sensors in both academic and industrial applications. One of the most advanced sensing platforms is a membrane-type surface stress sensor (MSS), which realizes both high sensitivity and compact system at the same time. The MSS is also expected to contribute to addressing nanomechanical behavior of living cells and their network.

Synthesis and polymerization of boronic acid containing monomers

This mini-review summarizes the most commonly used methods for the synthesis of phenylboronic acid-(co)polymers ranging from simple straightforward polymerization to complex post-polymerization modification.

Label-free detection of liver cancer cells by aptamer-based microcantilever biosensor

Liver cancer is one of the most common and highly malignant cancers in the world. There are no effective therapeutic options if an early liver cancer diagnosis is not achieved. In this work, detection of HepG2 cells by label-free microcantilever array aptasensor was developed. The sensing microcantilevers were functionalized by HepG2 cells-specific aptamers. Meanwhile, to eliminate the interferences induced by the environment, the reference microcantilevers were modified with 6-mercapto-1-hexanol self-assembled monolayers. The aptasensor exhibits high specificity over not only human liver normal cells, but also other cancer cells of breast, bladder, and cervix tumors. The linear relation ranges from 1×10(3) to 1×10(5)cells/mL, with a detection limit of 300 cells/mL (S/N=3). Our work provides a simple method for detection of liver cancer cells with advantages in terms of simplicity and stability.

Paper membrane-based SERS platform for the determination of glucose in blood samples

In this report, we present a paper membrane-based surface-enhanced Raman scattering (SERS) platform for the determination of blood glucose level using a nitrocellulose membrane as substrate paper, and the microfluidic channel was simply constructed by wax-printing method. The rod-shaped gold nanorod particles were modified with 4-mercaptophenylboronic acid (4-MBA) and 1-decanethiol (1-DT) molecules and used as embedded SERS probe for paper-based microfluidics. The SERS measurement area was simply constructed by dropping gold nanoparticles on nitrocellulose membrane, and the blood sample was dropped on the membrane hydrophilic channel. While the blood cells and proteins were held on nitrocellulose membrane, glucose molecules were moved through the channel toward the SERS measurement area. Scanning electron microscopy (SEM) was used to confirm the effective separation of blood matrix, and total analysis is completed in 5 min. In SERS measurements, the intensity of the band at 1070 cm(-1) which is attributed to B-OH vibration decreased depending on the rise in glucose concentration in the blood sample. The glucose concentration was found to be 5.43 ± 0.51 mM in the reference blood sample by using a calibration equation, and the certified value for glucose was 6.17 ± 0.11 mM. The recovery of the glucose in the reference blood sample was about 88 %. According to these results, the developed paper-based microfluidic SERS platform has been found to be suitable for use for the detection of glucose in blood samples without any pretreatment procedure. We believe that paper-based microfluidic systems may provide a wide field of usage for paper-based applications.

4-Mercaptophenylboronic acid: conformation, FT-IR, Raman, OH stretching and theoretical studies

4-Mercaptophenylboronic acid (4-mpba, C6H7BO2S) was investigated experimentally by vibrational spectroscopy. The molecular structure and spectroscopic parameters were studied by computational methods. The molecular dimer was investigated for intermolecular hydrogen bonding. Potential energy distribution analysis of normal modes was performed to identify characteristic frequencies. The present work provides a simple physical picture of the OH stretch vibrational spectra of 4-mpba and analogues of the compound studied. When the different computational methods are compared, there is a strong evidence of the better performance of the BLYP functional than the popular B3LYP functional to describe hydrogen bonding in the dimer. The findings of this research work should be useful to experimentalists in their quests for functionalised 4-mpba derivatives.

An enhanced LSPR fiber-optic nanoprobe for ultrasensitive detection of protein biomarkers

A miniaturized, localized surface plasmon resonance (LSPR)-coupled fiber-optic (FO) nanoprobe is reported as a biosensor that is capable of label-free, sensitive detection of a cancer protein biomarker, free prostate specific antigen (f-PSA). The biosensor is based on the LSPR at the reusable dielectric-metallic hybrid interface with a robust, gold nano-disk array at the fiber end facet that is directly fabricated using EBL and metal lift-off process. The f-PSA has been detected with a mouse anti-human PSA monoclonal antibody (mAb) as a specific receptor linked with a self-assembled monolayer at the LSPR-FO facet surfaces. Experimental investigation and data analysis found near field refractive index (RI) sensitivity at ~226 nm/RIU with current LSPR-FO nanoprobe, and demonstrated the lowest limit of detection (LOD) at 100 fg/mL (~3 fM) of f-PSA in PBS solutions. The control experimentation using 5mg/mL bovine serum albumin in PBS and nonspecific surface test shows the excellent specificity and selectivity in the detection of f-PSA in PBS. These results present important progress towards a miniaturized, multifunctional fiber-optic technology that integrates informational communication and sensing function for developing a high performance, label-free, point-of-care (POC) device.

Boronic Acid-based approach for separation and immobilization of glycoproteins and its application in sensing

Glycoproteins influence a broad spectrum of biological processes including cell-cell interaction, host-pathogen interaction, or protection of proteins against proteolytic degradation. The analysis of their glyco-structures and concentration levels are increasingly important in diagnosis and proteomics. Boronic acids can covalently react with cis-diols in the oligosaccharide chains of glycoproteins to form five- or six-membered cyclic esters. Based on this interaction, boronic acid-based ligands and materials have attracted much attention in both chemistry and biology as the recognition motif for enrichment and chemo/biosensing of glycoproteins in recent years. In this work, we reviewed the progress in the separation, immobilization and detection of glycoproteins with boronic acid-functionalized materials and addressed its application in sensing.

Miniaturised technologies for the development of artificial lipid bilayer systems

Artificially reproducing cellular environments is a key aim of synthetic biology, which has the potential to greatly enhance our understanding of cellular mechanisms. Microfluidic and lab-on-a-chip (LOC) techniques, which enable the controlled handling of sub-microlitre volumes of fluids in an automated and high-throughput manner, can play a major role in achieving this by offering alternative and powerful methodologies in an on-chip format. Such techniques have been successfully employed over the last twenty years to provide innovative solutions for chemical analysis and cell-, molecular- and synthetic- biology. In the context of the latter, the formation of artificial cell membranes (or artificial lipid bilayers) that incorporate membrane proteins within miniaturised LOC architectures offers huge potential for the development of highly sensitive molecular sensors and drug screening applications. The aim of this review is to give a comprehensive and critical overview of the field of microsystems for creating and exploiting artificial lipid bilayers. Advantages and limitations of three of the most popular approaches, namely suspended, supported and droplet-based lipid bilayers, are discussed. Examples are reported that show how artificial cell membrane microsystems, by combining together biological procedures and engineering techniques, can provide novel methodologies for basic biological and biophysical research and for the development of biotechnology tools.

Microcantilever biosensors for chemicals and bioorganisms

In the last fifteen years, microcantilevers (MCLs) have been emerging as a sensitive tool for the detection of chemicals and bioorganisms. Because of their small size, lightweight, and high surface-to-volume ratio, MCL-based sensors improve our capability to detect and identify biological agents by orders of magnitude. A biosensor is a device for the detection of an analyte that combines a biological component with a physicochemical detector component. The MCL biosensors have recently been reviewed in several papers. All of these papers were organized based on the sensing biological elements (antibody, enzyme, proteins, etc.) for recognition of analytes. In this review, we intend to summarize the microcantilever biosensors in a format of each specific chemical and bioorganism species to make information on individual biosensors easily accessible. We did this to aid researchers to locate relevant references.

Piezoresistive cantilever array sensor for consolidated bioprocess monitoring

Cellulolytic microbes occur in diverse natural niches and are being screened for industrial modification and utility. A microbe for consolidated bioprocessing (CBP) development can rapidly degrade pure cellulose and then ferment the resulting sugars into fuels. To identify and screen for novel microbes for CBP, we have developed a piezoresistive cantilever array sensor which is capable of simultaneous monitoring of glucose and ethanol concentration changes in a phosphate buffer solution. 4-mercaptophenylboronic acid and polyethyleneglycol-thiol are employed to functionalize each piezoresistive cantilever for glucose and ethanol sensing, respectively. Successful concentration measurements of glucose and ethanol with minimal interferences are obtained with our cantilever array sensor.

Synthesis and application of novel phenylboronate affinity materials based on organic polymer particles for selective trapping of glycoproteins

We report on synthesis concepts for the fabrication of various novel phenylboronate affinity materials based on polymethacrylate epoxy beads (Fractogel EMD Epoxy (M) 40-90 microm) and the testing of these functionalized polymer particles for selective trapping of a glycoprotein from a standard mixture containing a glycosylated and a nonglycosylated protein. Two inherently different approaches for the functionalization of the bare beads with boronate groups have been elucidated. In the first, the epoxy residues of the polymer particles were converted into reactive thiol groups which were subsequently used as anchor moieties for the immobilization of 4-vinylphenylboronic acid by radical addition or radical polymerization reaction. Three different ways for the generation of sulfhydryl groups have been examined leading to materials with distinct linker chemistries. In the second and more straightforward approach, the epoxy groups were reacted with 4-mercaptophenylboronic acid. The novel materials were thoroughly characterized by (i) quantitation of the sulfur content by elemental analysis, (ii) reactive sulfhydryls were determined in a photospectrometric assay, (iii) boron content was measured by inductively coupled plasma-atomic emission spectrometry, and (iv) the amount of reactive boronate groups was evaluated in a fast binding assay employing adenosine as test compound. A maximum concentration of 1.2 mmol boronate groups per gram dry beads could be achieved by the presented synthesis routes. Employing the novel phenylboronate affinity materials in capture and release experiments in the batch mode, a standard glycoprotein, viz. transferrin (Tf) from human serum was separated from a nonglycosylated protein, BSA. A commercial boronate affinity material based on 3-aminophenylboronic acid modified agarose gel was employed as reference material and was found to perform significantly worse compared to the herein presented novel polymethacrylate particles.

Landfill siloxane gas sensing using differentiating, responsive phase coated microcantilever arrays

Landfill biogases are being utilized more frequently as a new source of fuel energy. Volatile siloxane compounds usually contained in landfill biogases will form siloxane residues when the gases are burned, which significantly increases abrasion of combustion engines. Research on detection of siloxanes in landfill gas has been active during recent years with the principal analytical technique being gas chromatography/mass spectrometry (GC/MS). In our present work, we introduce a less expensive, compact methodology that employs microcantilever (MC) arrays for sensitive nanomechanical-based gas-phase sensing of the siloxanes. The cantilevers on the MC array were differentially coated on the active, nanostructured side with different responsive phases, and composite responses (magnitude of siloxane-induced MC bending) for four siloxanes were collected that exhibited selective signatures to aid in recognizing each siloxane. Limits of detection (LODs) derived from linear calibration plots were down to the sub-parts-per-million range, a sensitivity that is comparable with that of GC/MS reported by other researchers. Studies were performed in rather inert helium environment and a realistic matrix, and the overall response profiles and LODs were similar for both matrixes. A 5 week long-term reproducibility study illustrates the stability of the MC array. Moreover, the portable character of the MC array setup makes our method a very promising way to facilitate in-field detection of siloxanes in landfill gas in the future.