Multiplexing ligand-receptor binding measurements by chemically patterning microfluidic channels

Micropatterning of functional lipid bilayer assays for quantitative bioanalysis

Interactions of the cell with its environment are mediated by the cell membrane and membrane-localized molecules. Supported lipid bilayers have enabled the recapitulation of the basic properties of cell membranes and have been broadly used to further our understanding of cellular behavior. Coupled with micropatterning techniques, lipid bilayer platforms have allowed for high throughput assays capable of performing quantitative analysis at a high spatiotemporal resolution. Here, an overview of the current methods of the lipid membrane patterning is presented. The fabrication and pattern characteristics are briefly described to present an idea of the quality and notable features of the methods, their utilizations for quantitative bioanalysis, as well as to highlight possible directions for the advanced micropatterning lipid membrane assays.

Wafer-scale bioactive substrate patterning by chemical lift-off lithography

The creation of bioactive substrates requires an appropriate interface molecular environment control and adequate biological species recognition with minimum nonspecific attachment. Herein, a straightforward approach utilizing chemical lift-off lithography to create a diluted self-assembled monolayer matrix for anchoring diverse biological probes is introduced. The strategy encompasses convenient operation, well-tunable pattern feature and size, large-area fabrication, high resolution and fidelity control, and the ability to functionalize versatile bioarrays. With the interface-contact-induced reaction, a preformed alkanethiol self-assembled monolayer on a Au surface is ruptured and a unique defect-rich diluted matrix is created. This post lift-off region is found to be suitable for insertion of a variety of biological probes, which allows for the creation of different types of bioactive substrates. Depending on the modifications to the experimental conditions, the processes of direct probe insertion, molecular structure change-required recognition, and bulky biological species binding are all accomplished with minimum nonspecific adhesion. Furthermore, multiplexed arrays via the integration of microfluidics are also achieved, which enables diverse applications of as-prepared substrates. By embracing the properties of well-tunable pattern feature dimension and geometry, great local molecular environment control, and wafer-scale fabrication characteristics, this chemical lift-off process has advanced conventional bioactive substrate fabrication into a more convenient route.

Liposomes and lipid bilayers in biosensors

Biosensors for the rapid, specific, and sensitive detection of analytes play a vital role in healthcare, drug discovery, food safety, and environmental monitoring. Although a number of sensing concepts and devices have been developed, many longstanding challenges to obtain inexpensive, easy-to-use, and reliable sensor platforms remain largely unmet. Nanomaterials offer exciting possibilities for enhancing the assay sensitivity and for lowering the detection limits down to single-molecule resolution. In this review, we present an overview of liposomes and lipid bilayers in biosensing applications. Lipid assemblies in the form of spherical liposomes or two-dimensional planar membranes have been widely used in the design of biosensing assays; in particular, we highlight a number of recent promising developments of biosensors based on liposomes in suspension, liposome arrays, and lipid bilayers arrays. Assay sensitivity and specificity are discussed, advantages and drawbacks are reviewed, and possible further developments are outlined.

Supported Lipid Bilayers for the Generation of Dynamic Cell-Material Interfaces

Supported lipid bilayers (SLB) offer unique possibilities for studying cellular membranes and have been used as a synthetic architecture to interact with cells. Here, the state-of-the-art in SLB-based technology is presented. The fabrication, analysis, characteristics and modification of SLBs are described in great detail. Numerous strategies to form SLBs on different substrates, and the means to patteren them, are described. The use of SLBs as model membranes for the study of membrane organization and membrane processes in vitro is highlighted. In addition, the use of SLBs as a substratum for cell analysis is presented, with discrimination between cell-cell and cell-extracellular matrix (ECM) mimicry. The study is concluded with a discussion of the potential for in vivo applications of SLBs.

Microfluidic antibody arrays for simultaneous cell separation and stimulus

A microfluidic chip containing stamped antibody arrays was developed for simultaneous cell separation and drug testing. Poly(dimethyl siloxane) (PDMS) stamping was used to deposit antibodies in a microfluidic channel, forming discrete cell-capture regions on the surface. Cell mixtures were then introduced, resulting in the separation of cells when specific antibodies were used. Anti-CD19 antibody regions resulted in 94 % capture purity for CD19+ Ramos cells. An antibody that captures multiple cell types, for example anti-CD71, can also be used to capture several cell types simultaneously. Cells could also be loaded onto the arrays with spatial control using laminar streams. Both Ramos B cells and HuT 78 T cells were isolated in the chip and exposed to staurosporine in the same channel. Both cell lines had similar responses to the drug, with 2-10 % of cells remaining viable after 20 h of drug treatment, depending on cell type. The chip can also be used to analyze the efficacy of antibody therapy against cancer cells. Anti-CD95 was deposited on the surface and used for simultaneous cell capture and apoptosis induction via the extrinsic pathway. Cells captured on anti-CD95 surfaces had significant viability loss (15 % viability after 24 h) when compared with a control anti-CD71 antibody (81 % viability after 24 h). This chip can be used for a variety of cell separation and/or drug testing studies, enabling researchers to isolate cells and test them against different anti-cancer compounds and to follow cell response using fluorescence or other readout methods.

Monitoring phosphatidic acid formation in intact phosphatidylcholine bilayers upon phospholipase D catalysis

We have monitored the production of the negatively charged lipid, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidic acid acid (POPA), in supported lipid bilayers via the enzymatic hydrolysis of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (PC), a zwitterionic lipid. Experiments were performed with phospholipase D (PLD) in a Ca(2+) dependent fashion. The strategy for doing this involved using membrane-bound streptavidin as a biomarker for the charge on the membrane. The focusing position of streptavidin in electrophoretic-electroosmotic focusing (EEF) experiments was monitored via a fluorescent tag on this protein. The negative charge increased during these experiments due to the formation of POPA lipids. This caused the focusing position of streptavidin to migrate toward the negatively charged electrode. With the use of a calibration curve, the amount of POPA generated during this assay could be read out from the intact membrane, an objective that has been otherwise difficult to achieve because of the lack of unique chromophores on PA lipids. On the basis of these results, other enzymatic reactions involving the change in membrane charge could also be monitored in a similar way. This would include phosphorylation, dephosphorylation, lipid biosynthesis, and additional phospholipase reactions.

Tunable two dimensional protein patterns through self-assembly nanosphere template

By the aim of constructing surfaces for multi-component and multifunctional bioassay, a microsphere lithography technique was employed to control the surface morphology. Two kinds of protein molecules (antibodies) were used as building blocks. As a result, dual-component biocompatible surfaces with alternate immunoglobulin micropatterns were fabricated. The employed antibodies included human Immunoglobulin G (IgG) and rabbit IgG, which composed nanometer scale surface arrays on the surfaces. The antibodies were identified specially by immunoreactions with labeled antigens of fluorescein isothiocyanate (FITC)-antihuman IgG and tetramethylrhodamine-5-(and 6)-isothiocyanate (TRITC)-antirabbit IgG. The immune responses were confirmed by confocal fluorescence (FL) microscopy. A study on the sensitivity and quantification was done by using surface-enhanced resonance Raman scattering (SERRS) spectroscopy. The obtained SERRS spectra showed satisfactory resolution in the multi-component detection objects. No interference was observed from inner- or interactions of detecting molecules. The detection limits for both of the antigens reached to as low as 1 ng/mL, which was comparable to FL method. Meanwhile, a good linear relationship between SERRS peak intensity and the logarithm of antigens' concentrations (from 1 ng/mL to 1 mg/mL) were observed. The results demonstrated that SERRS is a very promising detection technique for multi-component immunoassay, and has great potential applications in biotechnology and biochemistry.

Protein separation by electrophoretic-electroosmotic focusing on supported lipid bilayers

An electrophoretic-electroosmotic focusing (EEF) method was developed and used to separate membrane-bound proteins and charged lipids based on their charge-to-size ratio from an initially homogeneous mixture. EEF uses opposing electrophoretic and electroosmotic forces to focus and separate proteins and lipids into narrow bands on supported lipid bilayers (SLBs). Membrane-associated species were focused into specific positions within the SLB in a highly repeatable fashion. The steady-state focusing positions of the proteins could be predicted and controlled by tuning experimental conditions, such as buffer pH, ionic strength, electric field, and temperature. Careful tuning of the variables should enable one to separate mixtures of membrane proteins with only subtle differences. The EEF technique was found to be an effective way to separate protein mixtures with low initial concentrations, and it overcame diffusive peak broadening to allow four bands to be separated simultaneously within a 380 μm wide isolated supported membrane patch.

Facile assembly of micro- and nanoarrays for sensing with natural cell membranes

Microarray technology has facilitated many powerful high-throughput studies in the fields of genetics and proteomics, among others. However, preparation of microarrays composed of cell-derived membranes with embedded receptors has proven difficult. Here we describe a new method for forming microarrays composed of synthetic lipid vesicles and natural cell membranes. The method is based upon assembly of vesicles and natural membranes into recessed micro- and nanowells and using a polydimethylsiloxane (PDMS) block as a "squeegee." This method is used to assemble phospholipid vesicles into arrays with micrometer and nanoscale dimensions. Native myelin and neuronal lipid raft arrays are also formed in 30 min or less. We show the natural membrane arrays can be used for sensing lipid-protein interactions by detecting cholera toxin binding to ganglioside GM1 in neuronal lipid rafts. In multicomponent arrays myelin can be distinguished from neuronal rafts by antibody binding to cell-specific surface antigens. Finally, myelin arrays formed in gold nanowells are used for surface plasmon resonance sensing. This assembly approach is simple, broadly applicable, and opens up new avenues of research not easily accomplished with standard microarray technology.

Etched glass microarrays with differential resonance for enhanced contrast and sensitivity of surface plasmon resonance imaging analysis

We report the fabrication and characterization of gold-coated etched glass array substrates for surface plasmon resonance imaging (SPRi) analysis with significantly enhanced performance, in particular image contrast and sensitivity. The etching of the glass substrate induces a variation in the resonance condition and thus in the resonance angle between the etched wells and the surrounding area, leading to the isolation of the array spot resonance with a significant reduction of the background signal. FDTD simulations show arrays with large spots and minimal spot-to-spot spacing yield ideal differential resonance conditions, which are verified by experimental results. Simulations also indicate the etched well structure exhibits enhanced SPR electric field intensity by 3-fold as compared to standard planar gold chips. Changes in the bulk sensitivity of the etched arrays have been obtained at the 10(-4) RIU level based on image intensity difference. The strong image contrast allows for improved microarray imaging analysis with easily distinguished signals from background resonance. The etched array chips are demonstrated for SPRi detection of bacterial toxins through the coating of an ultrathin SiO(2) film for direct vesicle fusion that establishes a supported membrane-based biosensing interface. Protein detection with cholera toxin (CT) at 5 nM is obtained, making this chip one of the most sensitive SPR imaging substrates ever reported without a postbinding amplification scheme. Furthermore, the surface can be regenerated by Triton X-100 for repeated cycles of membrane formation, protein binding, and biomolecular removal. The reusability and enhanced performance of the etched glass array chips should find a broad range of applications, opening up new avenues for high-throughput SPR imaging detection with convenience and marked surface sensitivity.

Photopatterned materials in bioanalytical microfluidic technology

Microfluidic technologies are playing an increasingly important role in biological inquiry. Sophisticated approaches to the microanalysis of biological specimens rely, in part, on the fine fluid and material control offered by microtechnology, as well as a sufficient capacity for systems integration. A suite of techniques that utilize photopatterning of polymers on fluidic surfaces, within fluidic volumes, and as primary device structures underpins recent technological innovation in bioanalysis. Well-characterized photopatterning approaches enable previously fabricated or commercially fabricated devices to be customized by the user in a straight-forward manner, making the tools accessible to laboratories that do not focus on microfabrication technology innovation. In this review of recent advances, we summarize reported microfluidic devices with photopatterned structures and regions as platforms for a diverse set of biological measurements and assays.

Surface-induced phase separation of a sphingomyelin/cholesterol/ganglioside GM1-planar bilayer on mica surfaces and microdomain molecular conformation that accelerates Abeta oligomerization

Ganglioside GM1 mediates the amyloid beta (Abeta) aggregation that is the hallmark of Alzheimer's disease (AD). To investigate how ganglioside-containing lipid bilayers interact with Abeta, we examined the interaction between Abeta40 and supported planar lipid bilayers (SPBs) on mica and SiO(2) substrates by using atomic force microscopy, fluorescence microscopy, and molecular dynamics computer simulations. These SPBs contained several compositions of sphingomyelin, cholesterol, and GM1 and were treated at physiological salt concentrations. Surprisingly high-speed Abeta aggregation of fibril formations occurred at all GM1 concentrations examined on the mica surface, but on the SiO(2) surface, only globular agglomerates formed and they formed slowly. At a GM1 concentration of 20mol%, unique triangular regions formed on the mica surface and the rapidly formed Abeta aggregations were observed only outside these regions. We have found that some unique surface-induced phase separations are induced by the GM1 clustering effects and the strong interactions between the GM1 head group and the water layer adsorbed in the ditrigonal cavities on the mica surface. The speed of Abeta40 aggregation and the shape of the agglomerates depend on the molecular conformation of GM1, which varies depending on the substrate materials. We identified the conformation that significantly accelerates Abeta40 aggregation, and we think that the detailed knowledge about the GM1 molecular conformation obtained in this work will be useful to those investigating Abeta-GM1 interactions.

Self-aligned supported lipid bilayers for patterning the cell-substrate interface

Supported lipid bilayers capture the fluidity and chemical properties of cellular membranes. In this report, we introduce a method for creating surfaces that contain multiple, aligned regions of supported membranes of different compositions at scales of micrometers and smaller. This method uses the design of a diffusional barrier to increase the resolution that can be achieved directly using traditional bilayer patterning techniques, such as laminar flow. We demonstrate the use of this platform for presenting ligands to the T Cell Receptor and LFA-1 that are tethered to separate, closely juxtaposed regions of bilayer, capturing an important aspect of the natural organization observed between T cells and Antigen Presenting Cells. Our results present a novel platform for the study of spatial separation of extracellular ligands and its impact on cell signals.

Laterally mobile, functionalized self-assembled monolayers at the fluorous-aqueous interface in a plug-based microfluidic system: characterization and testing with membrane protein crystallization

This paper describes a method to generate functionalizable, mobile self-assembled monolayers (SAMs) in plug-based microfluidics. Control of interfaces is advancing studies of biological interfaces, heterogeneous reactions, and nanotechnology. SAMs have been useful for such studies, but they are not laterally mobile. Lipid-based methods, though mobile, are not easily amenable to setting up the hundreds of experiments necessary for crystallization screening. Here we demonstrate a method, complementary to current SAM and lipid methods, for rapidly generating mobile, functionalized SAMs. This method relies on plugs, droplets surrounded by a fluorous carrier fluid, to rapidly explore chemical space. Specifically, we implemented his-tag binding chemistry to design a new fluorinated amphiphile, RfNTA, using an improved one-step synthesis of RfOEG under Mitsunobu conditions. RfNTA introduces specific binding of protein at the fluorous-aqueous interface, which concentrates and orients proteins at the interface, even in the presence of other surfactants. We then applied this approach to the crystallization of a his-tagged membrane protein, Reaction Center from Rhodobacter sphaeroides, performed 2400 crystallization trials, and showed that this approach can increase the range of crystal-producing conditions, the success rate at a given condition, the rate of nucleation, and the quality of the crystal formed.