Evaluation of Various pH and Temperature Conditions on the Stability of Azaspiracids and Their Importance in Preparative Isolation and Toxicological Studies

Preparation of 18O-labelled azaspiracids for accurate quantitation using liquid chromatography-mass spectrometry

Azaspiracids (AZAs) are a group of polyether marine algal toxins known to accumulate in shellfish, posing a risk to human health and the seafood industry. Analysis of AZAs is typically performed using LC-MS, which can suffer from matrix effects that significantly impact the accuracy of measurement results. While the use of isotopic internal standards is an effective approach to correct for these effects, isotopically labelled standards for AZAs are not currently available. In this study, 18O-labelled AZA1, AZA2, and AZA3 were prepared by reaction with H218O under acidic conditions, and the reaction kinetics and sites of incorporation were studied using LC-HRMS/MS aided by mathematical analysis of their isotope patterns. Analysis of the isotopic incorporation in AZA1 and AZA3 indicated the presence of four exchangeable oxygen atoms. Excessive isomerization occurred during preparation of 18O-labelled AZA2, suggesting a role for the 8-methyl group in the thermodynamic stability of AZAs. Neutralized mixtures of 18O-labelled AZA1 and AZA3 were found to maintain their isotopic and isomeric integrities when stored at -20 °C and were used to develop an isotope-dilution LC-MS method which was applied to reference materials of shellfish matrices containing AZAs, demonstrating high accuracy and excellent reproducibility. Preparation of isotopically labelled compounds using the isotopic exchange method, combined with the kinetic analysis, offers a feasible way to obtain isotopically labelled internal standards for a wide variety of biomolecules to support reliable quantitation.

Stability and Chemical Conversion of the Purified Reference Material of Gymnodimine-A under Different Temperature and pH Conditions

Gymnodimines (GYMs) are a group of fast-acting phycotoxins and their toxicological effects on human beings are still unclear due to the lack of sufficiently well-characterized large quantities of purified toxins for toxicology studies. In this study, a certified reference material (CRM) of GYM-A was prepared from the dinoflagellate Karenia selliformis, followed by multi-step chromatography separation and purification. Subsequently, the stability of GYM-A in methanolic media was evaluated at different temperature (-20, 4, and 20 °C) and pH (3, 5, and 7) conditions for 8 months, and the conversion products of GYM-A were explored by liquid chromatography-high resolution mass spectrometry (LC-HRMS). The results show that the stability of GYM-A decreased with increasing temperature and pH values. The GYM-A was stable during storage at -20 °C regardless of pH, but it decreased rapidly (81.8% ± 9.3%) at 20 °C in pH 7 solution after 8 months. Moreover, the concentrations of GYM-A did not significantly change at all temperatures in solutions with pH 3 (p > 0.05). It is recommended that GYM-A should be stored at low temperature (≤-20 °C) and pH (≤3) conditions for long-term storage in aqueous methanolic media. In addition, two conversion products of GYM-A, tentatively named as GYM-K (m/z 540) and GYM-L (m/z 524), were identified in the samples stored at high levels of pH and temperature. Based on the LC-HRMS data, the hypothetical chemical structures of both converting derivatives were proposed. A useful strategy for long-term storage of GYM-A CRM in aqueous methanolic media was suggested and two hypothesized conversion products of GYM-A were discovered in this study.

Emerging Marine Biotoxins in European Waters: Potential Risks and Analytical Challenges

Harmful algal blooms pose a challenge regarding food safety due to their erratic nature and forming circumstances which are yet to be disclosed. The best strategy to protect human consumers is through legislation and monitoring strategies. Global warming and anthropological intervention aided the migration and establishment of emerging toxin producers into Europe's temperate waters, creating a new threat to human public health. The lack of information, standards, and reference materials delay effective solutions, being a matter of urgent resolution. In this work, the recent findings of the presence of emerging azaspiracids, spirolildes, pinnatoxins, gymnodimines, palitoxins, ciguatoxins, brevetoxins, and tetrodotoxins on European Coasts are addressed. The information concerning emerging toxins such as new matrices, locations, and toxicity assays is paramount to set the risk assessment guidelines, regulatory levels, and analytical methodology that would protect the consumers.

Determination of lipophilic marine biotoxins by liquid chromatography-tandem mass spectrometry in five shellfish species from Washington State, USA

Low extraction efficiency (60-81%) of okadaic acid (OA) and dinophysistoxin 1 (DTX1) was obtained for 4 out of 5 shellfish species from Washington State (WA), USA, during application of a standard extraction method for determination of lipophilic marine biotoxins by LC-MS/MS as recommended by the European Union Reference Laboratory for Marine Biotoxins (EURLMB). OA and total OA including esters, DTX1, DTX2, and total DTX including esters, azaspiracid 1, 2, and 3 (AZA1, AZA2, and AZA3), pectenotoxin 2 (PTX2), and yessotoxin (YTX) were the toxins examined. Matrix-matched standards prepared from the same control samples used for spike-and-recovery tests were employed to evaluate toxin extraction efficiency and sample clean-up procedures. We adjusted the EURLMB extraction method by either using an acidified methanol extraction or pre-cooking shellfish homogenates at 70 °C for 20 min before EURLMB extraction. Extraction efficiency was improved markedly for OA and DTX1 with both modified methods and for YTX with the pre-cooking step included. However, recoveries were lower for YTX using the acidified methanol extraction and for PTX2 in non-mussel samples with the pre-cooking step. A hexane wash was applied to clean water-diluted non-hydrolyzed samples and a hexane wash was combined with solid-phase extraction for cleaning hydrolyzed samples. Improved sample clean-up, combined with LC-MS/MS adjustments, enabled quantification of U.S. Food and Drug Administration-regulated toxins in five shellfish species from WA with acceptable accuracy using non-matrix matched calibration standards.

Fatty acid esters of azaspiracids identified in mussels (Mytilus edulis) using liquid chromatography-high resolution mass spectrometry

Azaspiracids (AZAs) are lipophilic polyether toxins produced by Azadinium and Amphidoma species of marine microalgae. The main dinoflagellate precursors AZA1 and AZA2 are metabolized by shellfish to produce an array of AZA analogues. Many marine toxins undergo fatty acid esterification in shellfish, therefore mussel tissues contaminated with AZAs were screened for intact fatty acid esters of AZAs using liquid chromatography-high resolution mass spectrometry. Acyl esters were primarily observed for AZAs containing hydroxy groups at C-3 with 3-O-palmitoylAZA4 identified as the most abundant acyl ester, while other fatty acid esters including 18:1, 16:1, 17:0, 20:2 and 18:0 acyl esters were detected. The structures of these acyl derivatives were determined through LC-MS/MS experiments, and supported by periodate cleavage reactions and semi-synthesis of palmitate esters of the AZAs. Esters of the hydroxy groups at C-20 or C-21 were not observed in mussel tissue. The relative proportion of the most abundant AZA ester was less than 3% of the sum of the major free AZA analogues. These findings reveal an additional metabolic pathway for AZAs in shellfish.

•

Fatty acid esters of azaspiracids were identified in mussels (Mytilus edulis).

•

Fatty acid esters of azaspiracids with hydroxy groups at C-3 were primarily observed.

•

Fatty acid esters of regulated azaspiracids (AZA1, 2, −3) were absent.

•

Structures were determined with LC-HRMS and confirmed by semi-synthesis of palmitate esters and periodate cleavage.

•

This work reveals an additional metabolic pathway for azaspiracids in shellfish.

Identification of 21,22-Dehydroazaspiracids in Mussels ( Mytilus edulis) and in Vitro Toxicity of Azaspiracid-26

Azaspiracids (AZAs) are marine biotoxins produced by the genera Azadinium and Amphidoma, pelagic marine dinoflagellates that may accumulate in shellfish resulting in human illness following consumption. The complexity of these toxins has been well documented, with more than 40 structural variants reported that are produced by dinoflagellates, result from metabolism in shellfish, or are extraction artifacts. Approximately 34 μg of a new AZA with MW 823 Da (AZA26 (3)) was isolated from blue mussels ( Mytilus edulis), and its structure determined by MS and NMR spectroscopy. AZA26, possibly a bioconversion product of AZA5, lacked the C-20-C-21 diol present in all AZAs reported thus far and had a 21,22-olefin and a keto group at C-23. Toxicological assessment of 3 using an in vitro model system based on Jurkat T lymphocyte cells showed the potency to be ∼30-fold lower than that of AZA1. The corresponding 21,22-dehydro-23-oxo-analogue of AZA10 (AZA28) and 21,22-dehydro analogues of AZA3, -4, -5, -6, -9, and -10 (AZA25, -48 (4), -60, -27, -49, and -61, respectively) were also identified by HRMS/MS, periodate cleavage reactivity, conversion from known analogues, and NMR (for 4 that was present in a partially purified sample of AZA7).

High resolution mass spectrometry for quantitative analysis and untargeted screening of algal toxins in mussels and passive samplers

Measurement of marine algal toxins has traditionally focussed on shellfish monitoring while, over the last decade, passive sampling has been introduced as a complementary tool for exploratory studies. Since 2011, liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been adopted as the EU reference method (No. 15/2011) for detection and quantitation of lipophilic toxins. Traditional LC-MS approaches have been based on low-resolution mass spectrometry (LRMS), however, advances in instrument platforms have led to a heightened interest in the use of high-resolution mass spectrometry (HRMS) for toxin detection. This work describes the use of HRMS in combination with passive sampling as a progressive approach to marine algal toxin surveys. Experiments focused on comparison of LRMS and HRMS for determination of a broad range of toxins in shellfish and passive samplers. Matrix effects are an important issue to address in LC-MS; therefore, this phenomenon was evaluated for mussels (Mytilus galloprovincialis) and passive samplers using LRMS (triple quadrupole) and HRMS (quadrupole time-of-flight and Orbitrap) instruments. Matrix-matched calibration solutions containing okadaic acid and dinophysistoxins, pectenotoxin, azaspiracids, yessotoxins, domoic acid, pinnatoxins, gymnodimine A and 13-desmethyl spirolide C were prepared. Similar matrix effects were observed on all instruments types. Most notably, there was ion enhancement for pectenotoxins, okadaic acid/dinophysistoxins on one hand, and ion suppression for yessotoxins on the other. Interestingly, the ion selected for quantitation of PTX2 also influenced the magnitude of matrix effects, with the sodium adduct typically exhibiting less susceptibility to matrix effects than the ammonium adduct. As expected, mussel as a biological matrix, quantitatively produced significantly more matrix effects than passive sampler extracts, irrespective of toxin. Sample dilution was demonstrated as an effective measure to reduce matrix effects for all compounds, and was found to be particularly useful for the non-targeted approach. Limits of detection and method accuracy were comparable between the systems tested, demonstrating the applicability of HRMS as an effective tool for screening and quantitative analysis. HRMS offers the advantage of untargeted analysis, meaning that datasets can be retrospectively analyzed. HRMS (full scan) chromatograms of passive samplers yielded significantly less complex data sets than mussels, and were thus more easily screened for unknowns. Consequently, we recommend the use of HRMS in combination with passive sampling for studies investigating emerging or hitherto uncharacterized toxins.

Effect of the industrial steaming on the toxicity, estimated by LC-MS/MS, of mussels exposed for a long time to diarrhetic shellfish poisoning (DSP) toxins

The effect of industrial steaming on mussels that had been naturally exposed to DSP toxins for a long time was studied using LC-MS/MS. The estimated toxicity increased with steaming by a percentage that cannot be explained by weight loss. The estimated toxin content per mussel increased substantially with the treatment, which can only be explained by an incorrect estimation by the technique (at the extraction or analytical level) or by the presence of unknown derivatives or analogues. Direct alkaline hydrolysis of the mussel meat yielded more toxin than the standard hydrolysis (hydrolysis of the methanolic extracts), suggesting that extraction was, at least in part, responsible for the increase of toxin content. In situations as the one described in this work, it can be expected that mussels with toxicities well below the regulatory limit could easily surpass that level after industrial steaming, thus producing important losses for food processors.

A mussel (Mytilus edulis) tissue certified reference material for the marine biotoxins azaspiracids

Azaspiracids (AZAs) are lipophilic biotoxins produced by marine algae that can contaminate shellfish and cause human illness. The European Union (EU) regulates the level of AZAs in shellfish destined for the commercial market, with liquid chromatography-mass spectrometry (LC-MS) being used as the official reference method for regulatory analysis. Certified reference materials (CRMs) are essential tools for the development, validation, and quality control of LC-MS methods. This paper describes the work that went into the planning, preparation, characterization, and certification of CRM-AZA-Mus, a tissue matrix CRM, which was prepared as a wet homogenate from mussels (Mytilus edulis) naturally contaminated with AZAs. The homogeneity and stability of CRM-AZA-Mus were evaluated, and the CRM was found to be fit for purpose. Extraction and LC-MS/MS methods were developed to accurately certify the concentrations of AZA1 (1.16 mg/kg), AZA2 (0.27 mg/kg), and AZA3 (0.21 mg/kg) in the CRM. Quantitation methods based on standard addition and matrix-matched calibration were used to compensate for the matrix effects in LC-MS/MS. Other toxins present in this CRM at lower levels were also measured with information values reported for okadaic acid, dinophysistoxin-2, yessotoxin, and several spirolides.

Extended evaluation of polymeric and lipophilic sorbents for passive sampling of marine toxins

Marine biotoxins are algal metabolites that can accumulate in fish or shellfish and render these foodstuffs unfit for human consumption. These toxins, released into seawater during algal occurrences, can be monitored through passive sampling. Acetone, methanol and isopropanol were evaluated for their efficiency in extracting toxins from algal biomass. Isopropanol was chosen for further experiments thanks to a slightly higher recovery and no artifact formation. Comparison of Oasis HLB, Strata-X, BondElut C18 and HP-20 sorbent materials in SPE-mode led to the choice of Oasis HLB, HP-20 and Strata-X. These three sorbents were separately exposed as passive samplers for 24 h to seawater spiked with algal extracts containing known amounts of okadaic acid (OA), azaspiracids (AZAs), pinnatoxin-G (PnTX-G), 13-desmethyl spirolide-C (SPX1) and palytoxins (PlTXs). Low density polyethylene (LDPE) and silicone rubber (PDMS) strips were tested in parallel on similar mixtures of spiked natural seawater for 24 h. These strips gave significantly lower recoveries than the polymeric sorbents. Irrespective of the toxin group, the adsorption rate of toxins on HP-20 was slower than on Oasis HLB and Strata-X. However, HP-20 and Strata-X gave somewhat higher recoveries after 24 h exposure. Irrespective of the sorbent tested, recoveries were generally highest for cyclic imines and OA group toxins, slightly lower for AZAs, and the lowest for palytoxins. Trials in re-circulated closed tanks with mussels exposed to Vulcanodinium rugosum or Prorocentrum lima allowed for further evaluation of passive samplers. In these experiments with different sorbent materials competing for toxins in the same container, Strata-X accumulated toxins faster than Oasis HLB, and HP-20, and to higher levels. The deployment of these three sorbents at Ingril French Mediterranean lagoon to detect PnTX-G in the water column showed accumulation of higher levels on HP-20 and Oasis HLB compared to Strata-X. This study has significantly extended the range of sorbents for passive sampling of marine toxins. In particular, sorbents were included that had previously been evaluated for polyhalogenated contaminants, pharmaceuticals, phytochemicals or veterinary residues. Moreover, this study has for the first time demonstrated the usefulness of the polymeric Oasis HLB and Strata-X sorbents in laboratory and field studies for various microalgal toxins.

Epimers of azaspiracids: Isolation, structural elucidation, relative LC-MS response, and in vitro toxicity of 37-epi-azaspiracid-1

Since azaspiracid-1 (AZA1) was identified in 1998, the number of AZA analogues has increased to over 30. The development of an LC-MS method using a neutral mobile phase led to the discovery of isomers of AZA1, AZA2, and AZA3, present at ~2-16% of the parent analogues in phytoplankton and shellfish samples. Under acidic mobile phase conditions, isomers and their parents are not separated. Stability studies showed that these isomers were spontaneous epimerization products whose formation is accelerated with the application of heat. The AZA1 isomer was isolated from contaminated shellfish and identified as 37-epi-AZA1 by nuclear magnetic resonance (NMR) spectroscopy and chemical analyses. Similar analysis indicated that the isomers of AZA2 and AZA3 corresponded to 37-epi-AZA2 and 37-epi-AZA3, respectively. The 37-epimers were found to exist in equilibrium with the parent compounds in solution. 37-epi-AZA1 was quantitated by NMR, and relative molar response studies were performed to determine the potential differences in LC-MS response of AZA1 and 37-epi-AZA1. Toxicological effects were determined using Jurkat T lymphocyte cells as an in vitro cell model. Cytotoxicity experiments employing a metabolically based dye (i.e., MTS) indicated that 37-epi-AZA1 elicited a lethal response that was both concentration- and time-dependent, with EC50 values in the subnanomolar range. On the basis of EC50 comparisons, 37-epi-AZA1 was 5.1-fold more potent than AZA1. This data suggests that the presence of these epimers in seafood products should be considered in the analysis of AZAs for regulatory purposes.

Production and isolation of azaspiracid-1 and -2 from Azadinium spinosum culture in pilot scale photobioreactors

Azaspiracid (AZA) poisoning has been reported following consumption of contaminated shellfish, and is of human health concern. Hence, it is important to have sustainable amounts of the causative toxins available for toxicological studies and for instrument calibration in monitoring programs, without having to rely on natural toxin events. Continuous pilot scale culturing was carried out to evaluate the feasibility of AZA production using Azadinium spinosum cultures. Algae were harvested using tangential flow filtration or continuous centrifugation. AZAs were extracted using solid phase extraction (SPE) procedures, and subsequently purified. When coupling two stirred photobioreactors in series, cell concentrations reached 190,000 and 210,000 cell·mL⁻¹ at steady state in bioreactors 1 and 2, respectively. The AZA cell quota decreased as the dilution rate increased from 0.15 to 0.3 day⁻¹, with optimum toxin production at 0.25 day⁻¹. After optimization, SPE procedures allowed for the recovery of 79 ± 9% of AZAs. The preparative isolation procedure previously developed for shellfish was optimized for algal extracts, such that only four steps were necessary to obtain purified AZA1 and -2. A purification efficiency of more than 70% was achieved, and isolation from 1200 L of culture yielded 9.3 mg of AZA1 and 2.2 mg of AZA2 of >95% purity. This work demonstrated the feasibility of sustainably producing AZA1 and -2 from A. spinosum cultures.

A perspective on the toxicology of marine toxins

Although there has been much progress with regard to marine toxins from dinoflagellates, much remains to be done. Because these compounds are a seafood consumer risk, the demands cover from legislative to scientific aspects. Legislation is required for all new toxins that appear in the coasts. On the other hand, it is important to understand the toxicity of the different analogues, in terms of both the relative toxicity to reference compounds and the mechanism of toxicity itself, both acute and long-term. For this, a uniform approach to do toxic studies is necessary, especially acute toxicity. The need for pure standards in sufficient supply and the understanding of the mode of action of some of the compounds (such as yessotoxin or azaspiracids) will help the development of another important field, the use of marine toxins as drug leads, and the chemistry around them.

Improved isolation procedure for azaspiracids from shellfish, structural elucidation of azaspiracid-6, and stability studies

Azaspiracids are a group of lipophilic polyether toxins produced by the small dinoflagellate Azadinium spinosum. They may accumulate in shellfish and can result in illnesses when consumed by humans. Research into analytical methods, chemistry, metabolism, and toxicology of azaspiracids has been severely constrained by the scarcity of high-purity azaspiracids. Consequently, since their discovery in 1995, considerable efforts have been made to develop methods for the isolation of azaspiracids in sufficient amounts and purities for toxicological studies, in addition to the preparation of standard reference materials. A seven-step procedure was improved for the isolation of azaspiracids-1-3 (1, 2, and 3) increasing recoveries 2-fold as compared to previous methods and leading to isolation of sufficiently purified azaspiracid-6 (6) for structural determination by NMR spectroscopy. The procedure, which involved a series of partitioning and column chromatography steps, was performed on 500 g of Mytilus edulis hepatopancreas tissue containing ~14 mg of 1. Overall yields of 1 (52%), 2 (43%), 3 (43%), and 6 (38%) were good, and purities were confirmed by NMR spectroscopy. The structure of 6 was determined by one- and two-dimensional NMR spectroscopy and mass spectrometry. The stability of 6 relative to 1 was also assessed in three solvents in a short-term study that demonstrated the greatest stability in aqueous acetonitrile.