Mass Selection of Ions from Beams Using Waveform Isolation in Radiofrequency Quadrupoles

Square Parametric Excitation: A Digital Resonant Method for the Quadrupole Ion Trap

Digital ion trap technology is an alternate method for driving quadrupole ion traps and mass filters using variable frequency, fixed amplitude RF square waves in place of variable amplitude, fixed frequency RF sine waves. This technique offers some advantages such as an increase in the high mass analysis range by varying frequency and lower overall voltage requirements. Here, we present a complex square waveform developed for resonant parametric excitation in a quadrupole linear ion trap. Unlike traditional resonance methods, the driving RF square wave and auxiliary square wave are coupled using the same digital circuitry without the need for transformer coupling. In this work, we use this complex waveform to selectively excite the first order parametric resonances of ion motion. The square parametric excitation method presented here employs a simple and repetitive circuit design consisting of a low-voltage waveform generator followed by a series of high-voltage MOSFET switches. This design allows for resonance methods to be easily implemented in the all-digital quadrupole. The complex square waveform can perform the same useful functions as sine wave auxiliary signals, such as selective mass elimination and mass isolation. We also demonstrate that the mass resolution performance and S/N of our digital mass spectrometer is improved by applying the complex square waveform during ion ejection.

Linear ion trap mass selectivity with impulse power supply and sinusoidal dipolar excitation

RATIONALE

An ion trap mass analyzer can be operated by either a sinusoidal waveform power supply or an impulse waveform power supply. The optimal conditions for the performance of ion trap which is driven by an impulse waveform power supply with sinusoidal dipolar voltage were investigated theoretically, and further verified by experiments.

METHODS

The analytical relationship between β and q values is derived theoretically for optimal performance, and the dependencies β(q) for different trapezoidal waveforms are studied. To explain the dependence of resolution with working point q, the derivative dβ/dq is also derived analytically for the case of a rectangular waveform power supply. The theoretical results are further verified by experiments.

RESULTS

The results from both theoretical calculations and experiments are in very good agreement. The behaviour resolution with q is controlled by the dispersion dβ/dq that was also confirmed by experiments, when the resolution increases with q.

CONCLUSIONS

The optimal conditions of β, q_ex values and required excitation time n are when S(q) is close to 1 for an ion trap driven by trapezoidal waveform voltage with sinusoidal dipolar voltage. It shown that with increasing impulse parameter τ the dispersion dβ/dq decreases and the mass resolution also decreases as result. In the case of applying a rectangular waveform shape voltage, the mass selectivity is the same as for the sinusoidal wave shape. Copyright © 2016 John Wiley & Sons, Ltd.

Novel control modes to improve the performance of rectilinear ion trap mass spectrometer with dual pressure chambers

The rectilinear ion trap (RIT) has gradually become one of the preferred mass analyzers for portable mass spectrometers because of its simple configuration. In order to enhance the performance, including sensitivity, quantitation capability, throughput, and resolution, a novel RIT mass spectrometer with dual pressure chambers was designed and characterized. The studied system constituted a quadrupole linear ion trap (QLIT) in the first chamber and a RIT in the second chamber. Two control modes are hereby proposed: Storage Quadrupole Linear Ion Trap-Rectilinear Ion Trap (SQLIT-RIT) mode, in which the QLIT was used at high pressure for ion storage and isolation, and the RIT was used for analysis; and Analysis Quadrupole Linear Ion Trap-Rectilinear Ion Trap (AQLIT-RIT) mode, in which the QLIT was used for ion storage and cooling. Subsequently, synchronous scanning and analysis were carried out by QLIT and RIT. In SQLIT-RIT mode, signal intensity was improved by a factor of 30; the limit of quantitation was reduced more than tenfold to 50 ng mL^-1, and an optimal duty cycle of 96.4% was achieved. In AQLIT-RIT mode, the number of ions coexisting in the RIT was reduced, which weakened the space-charge effect and reduced the mass shift. Furthermore, the mass resolution was enhanced by a factor of 3. The results indicate that the novel control modes achieve satisfactory performance without adding any system complexity, which provides a viable pathway to guarantee good analytical performance in miniaturization of the mass spectrometer.

An energy-filtering device coupled to a quadrupole mass spectrometer for soft-landing molecular ions on surfaces with controlled energy

We have developed an energy-filtering device coupled to a quadrupole mass spectrometer to deposit ionized molecules on surfaces with controlled energy in ultra high vacuum environment. Extensive numerical simulations as well as direct measurements show that the ion beam flying out of a quadrupole exhibits a high-energy tail decreasing slowly up to several hundred eV. This energy distribution renders impossible any direct soft-landing deposition of molecular ions. To remove this high-energy tail by energy filtering, a 127° electrostatic sector and a specific triplet lenses were designed and added after the last quadrupole of a triple quadrupole mass spectrometer. The results obtained with this energy-filtering device show clearly the elimination of the high-energy tail. The ion beam that impinges on the sample surface satisfies now the soft-landing criterion for molecular ions, opening new research opportunities in the numerous scientific domains involving charges adsorbed on insulating surfaces.

In-situ enrichment of phosphopeptides on MALDI plates modified by ambient ion landing

We report substantial in-situ enrichment of phosphopeptides in peptide mixtures using titanium and zirconium dioxide-coated matrix assisted laser desorption-ionization (MALDI) plates prepared by recently reported ambient ion landing deposition technique. The technique was able to modify four common materials currently used for MALDI targets (stainless steel, aluminum, indium-tin oxide glass and polymeric anchor chip). The structure of the deposited dioxide was investigated by electron microscopy, and different surfaces were compared and discussed in this study. Two standard proteins were used to test the enrichment capabilities of modified MALDI plates: casein and in-vitro phosphorylated trehalase. The enrichment of casein tryptic digest resulted in identification of 20 phosphopeptides (including miscleavages). Trehalase was used as a suitable model of larger protein that provided more complex peptide mixture after the trypsin digestion. All four possible phosphorylation sites in trehalase were identified and up to seven phosphopetides were found (including methionine oxidations and miscleavages). Two different mass spectrometers, MALDI-Fourier transform ion cyclotron resonance (FTICR) and MALDI-time of flight, were used to detect the phosphopeptides from modified MALDI plates after the enrichment procedure. It was observed that the desorption-ionization phenomena on the modified surfaces are not critically influenced by the parameters of the different MALDI ion sources (e.g. different pressure, different extraction voltages), and thus the presence of dioxide layer on the standard MALDI plate does not significantly interfere with the main MALDI processes. The detection of phosphopeptides after the enrichment could be done by both instruments. Desorption electrospray ionization coupled to the FTICR was also tested, but, unlike MALDI, it did not provide satisfactory results.

Soft landing of complex molecules on surfaces

Soft and reactive landing of mass-selected ions onto surfaces has become a topic of substantial interest due to its promising potential for the highly controlled preparation of materials. For example, there are possible applications in the production of peptide and protein microarrays for use in high-throughput screening, protein separation and conformational enrichment of peptides, redox protein characterization, thin-film production, and the preparation of catalysts through deposition of clusters and organometallic complexes. Soft landing overcomes many of the limitations associated with conventional thin-film production techniques and offers unprecedented selectivity and specificity of preparation of deposited species. This review discusses the fundamental aspects of soft and reactive landing of mass-selected ions on surfaces that pertain to applications of these techniques in biomaterials, molecular electronics, catalysis, and interfacial chemistry.

Ion trap mass analysis at high pressure: an experimental characterization

In recent years, it has become increasingly interesting to understand the performance of mass spectrometers at pressures much higher than those employed with conventional operating conditions. This interest has been driven by several influences, including demand for the development of reduced-power miniature mass spectrometers, desire for improved ion transfer into and through mass spectrometers, enhanced-yield preparative mass separations, and mass filtering at the atmospheric pressure interface. In this study, an instrument was configured to allow for the performance characterization of a rectilinear ion trap (RIT) at pressures up to 50 mtorr with air used as the buffer gas. The mass analysis efficiency, mass resolution, isolation efficiency, and collision-induced dissociation (CID) efficiency were evaluated at pressures ranging from 1 to 50 mtorr. The extent of degradation of mass resolution, isolation efficiency and ion stability as functions of pressure were characterized. Also, the optimal resonance ejection conditions were obtained at various pressures. Operations at 50 mtorr demonstrated improved CID efficiency in addition to peak widths of 2 and 5 m/z units (full width at half-maximum, FWHM) for protonated caffeine (m/z 195) and Ultramark (m/z 1521) respectively.

Ion trap mass analysis at high pressure: a theoretical view

The mass-selective manipulation of ions at elevated pressure, including mass analysis, ion isolation, or excitation, is of great interest for the development of mass spectrometry instrumentation, particularly for systems in which ion traps are employed as mass analyzers or storage devices. While experimental exploration of high-pressure mass analysis is limited by various difficulties, such as ion detection or electrical discharge at high-pressure, theoretical methods have been developed in this work to study ion/neutral collision effects within quadrupole ion traps and to explore their performance at pressures up to 1 Torr. Ion trapping, isolation, excitation, and resonance ejection were investigated over a wide pressure range. The theoretically calculated data were compared with available experimental data for pressures up to 50 mTorr, allowing the prediction of ion trap performance at pressures more than 10 times higher.

In situ SIMS analysis and reactions of surfaces prepared by soft landing of mass-selected cations and anions using an ion trap mass spectrometer

Mass-selected polyatomic cations and anions, produced by electrosonic spray ionization (ESSI), were deposited onto polycrystalline Au or fluorinated self-assembled monolayer (FSAM) surfaces by soft landing (SL), using a rectilinear ion trap (RIT) mass spectrometer. Protonated and deprotonated molecules, as well as intact cations and anions generated from such molecules as peptides, inorganic catalysts, and fluorescent dyes, were soft-landed onto the surfaces. Analysis of the modified surfaces was performed in situ by Cs(+) secondary ion mass spectrometry (SIMS) using the same RIT mass analyzer to characterize the sputtered ions as that used to mass select the primary ions for SL. Soft-landing times as short as 30 s provided surfaces that yielded good quality SIMS spectra. Chemical reactions of the surfaces modified by SL were generated in an attached reaction chamber into which the surface was transferred under vacuum. For example, a surface on which protonated triethanolamine had been soft landed was silylated using vapor-phase chlorotrimethylsilane before being returned still under vacuum to the preparation chamber where SIMS analysis revealed the silyloxy functionalization. SL and vapor-phase reactions are complementary methods of surface modification and in situ surface analysis by SIMS is a simple way to characterize the products produced by either technique.