3'-Protected 2'-deoxynucleoside 5'-triphosphates as a tool for heat-triggered activation of polymerase chain reaction

Design, optimization, and application of multiplex rRT-PCR in the detection of respiratory viruses

Viral respiratory infections are common and serious diseases. Because there is no effective treatment method or vaccine for respiratory tract infection, early diagnosis is vital to identify the pathogen so as to determine the infectivity of the patient and to quickly take measures to curb the spread of the virus, if warranted, to avoid serious public health problems. Real-time reverse transcriptase PCR (rRT-PCR), which has high sensitivity and specificity, is the best approach for early diagnosis. Among rRT-PCR methods, multiplex rRT-PCR can resolve issues arising from various types of viruses, high mutation frequency, coinfection, and low concentrations of virus. However, the design, optimization, and validation of multiplex rRT-PCR are more complicated than singleplex rRT-PCR, and comprehensive research on multiplex rRT-PCR methodology is lacking. This review summarizes recent progress in multiplex rRT-PCR methodology, outlines the principles of design, optimization and validation, and describes a scheme to help diagnostic companies to design and optimize their multiplex rRT-PCR detection panel and to assist laboratory staff to solve problems in their daily work. In addition, the analytical validity, clinical validity and clinical utility of multiplex rRT-PCR in viral respiratory tract infection diagnosis are assessed to provide theoretical guidance and useful information for physicians to understand the test results.

Reverse transcriptase kinetics for one-step RT-PCR

Understanding reverse transcriptase (RT) activity is critical for designing fast one-step RT-PCRs. We report a stopped-flow assay that monitors SYBR Green I fluorescence to investigate RT activity in PCR conditions. We studied the influence of PCR conditions on RT activity and assessed the accuracy of cDNA synthesis predictions for one-step RT-PCR. Nucleotide incorporation increased from 26 to 89 s^-1 between 1.5 and 6 mM MgCl₂ but was largely unaffected by changes in KCl. Conversely, increasing KCl from 15 to 75 mM increased apparent rate constants for RT-oligonucleotide binding (0.010-0.026 nM^-1 s^-1) and unbinding (0.2-1.5 s^-1). All rate constants increased between 22 and 42 °C. When evaluated by PCR quantification cycle, cDNA predictions differed from experiments using RNase H+ RT (average 1.7 cycles) and RNase H- (average 4.5 cycles). Decreasing H+ RT concentrations 10 to 10⁴-fold from manufacturer recommendations improved cDNA predictions (average 0.8 cycles) and increased RT-PCR assay efficiency. RT activity assays and models can be used to aid assay design and improve the speed of RT-PCRs. RT type and concentration must be selected to promote rapid cDNA synthesis but minimize nonspecific amplification. We demonstrate 2-min one-step RT-PCR of a Zika virus target using reduced RT concentrations and extreme PCR.

Template-Independent Enzymatic Oligonucleotide Synthesis (TiEOS): Its History, Prospects, and Challenges

There is a growing demand for sustainable methods in research and development, where instead of hazardous chemicals, an aqueous medium is chosen to perform biological reactions. In this Perspective, we examine the history and current methodology of using enzymes to generate artificial single-stranded DNA. By using traditional solid-phase phosphoramidite chemistry as a metric, we also explore criteria for the method of template-independent enzymatic oligonucleotide synthesis (TiEOS). As its key component, we delve into the biology of one of the most enigmatic enzymes, terminal deoxynucleotidyl transferase (TdT). As TdT is found to exponentially increase antigen receptor diversity in the vertebrate immune system by adding nucleotides in a template-free manner, researchers have exploited this function as an alternative to the phosphoramidite synthesis method. Though TdT is currently the preferred enzyme for TiEOS, its random nucleotide incorporation presents a barrier in synthesis automation. Taking a closer look at the TiEOS cycle, particularly the coupling step, we find it is comprised of additions > n+1 and deletions. By tapping into the physical and biochemical properties of TdT, we strive to further elucidate its mercurial behavior and offer ways to better optimize TiEOS for production-grade oligonucleotide synthesis.

The Effect of Single Mismatches on Primer Extension

BACKGROUND

Allele-specific PCR is an important diagnostic tool that identifies single-nucleotide variants by preferential amplification of a particular allele, using primers that are mismatched to all but one allele variant.

METHODS

We applied a fluorescent stopped-flow polymerase assay to measure extension rates from oligonucleotide hairpins to simulate primer-template pairs. Under PCR-applicable conditions, reaction rates were recorded in nucleotides per second per polymerase (nt/s/poly). The effects of temperature, potassium chloride, mismatch type, and position were studied with primarily a deletion mutant of Thermus aquaticus (Taq) DNA polymerase and 135 oligonucleotide sequences.

RESULTS

Rates at 65 °C were between 205 ± 11 and 177 ± 8 nt/s/poly for matched templates and between 4.55 ± 0.21 and 0.008 ± 0.005 nt/s/poly for 3'-mismatched templates. Although extension rates progressively increased with mismatches further away from the 3' end, rates were still reduced by as much as 84% with a C · C mismatch 6 bases from the 3' end. The optimal extension temperature for matched sequences was 70 °C, shifting to 55-60 °C for 3' mismatches. KCl inhibited mismatch extension. The Michaelis constant (K_m) was increased and the apparent unimolecular rate constant (k_cat) decreased for 3' mismatches relative to matched templates.

CONCLUSIONS

Although primer extension of mismatches depends on mismatch type and position, variation also depends on local sequence, KCl concentration, and the type of polymerase. Introduction of 3' mismatches reduces the optimal temperature for extension, suggesting higher annealing temperatures for better allele discrimination. Quantitative descriptions of expected specificity in allele-specific PCR provide additional design direction and suggest when other methods (e.g., high-resolution melting analysis) may be a better choice.

Covalent modification of primers improves PCR amplification specificity and yield

We report a method for covalent modification of primers that enhances the specificity of PCR and increases the yield of specific amplification products at the end of PCR. The introduction of thermally stable covalent modifications, such as alkyl groups to the exocyclic amines of deoxyadenosine or cytosine residues at the 3'-ends of primers results in enhanced specificity of reactions. This higher specificity can result in greater sensitivity of detection by reducing competition with non-productive reactions. The reduction in the amplification of unintended byproducts is most apparent when both primers are modified at their respective 3'-ends. The T Ms of such modified primers are only slightly affected by the inclusion of these modifiers. The principal mode of action is believed to be driven by the poor enzyme extension of substrates with closely juxtaposed bulky alkyl groups, such as would result from the replication of primer dimer artifact.

A Tale of Tails: Dissecting the Enhancing Effect of Tailed Primers in Real-Time PCR

Non-specific tail sequences are often added to the 5’-terminus of primers to improve the robustness and overall performance of diagnostic assays. Despite the widespread use of tailed primers, the underlying working mechanism is not well understood. To address this problem, we conducted a detailed in vitro and in silico analysis of the enhancing effect of primer tailing on 2 well-established foot-and-mouth disease virus (FMDV) RT-qPCR assays using an FMDV reference panel. Tailing of the panFMDV-5UTR primers mainly affected the shape of the amplification curves. Modelling of the raw fluorescence data suggested a reduction of the amplification efficiency due to the accumulation of inhibitors. In depth analysis of PCR products indeed revealed the rapid accumulation of forward-primer derived artefacts. More importantly, tailing of the forward primer delayed artefacts formation and concomitantly restored the sigmoidal shape of the amplification curves. Our analysis also showed that primer tailing can alter utilisation patterns of degenerate primers and increase the number of primer variants that are able to participate in the reaction. The impact of tailed primers was less pronounced in the panFMDV-3D assay with only 5 out of 50 isolates showing a clear shift in Cq values. Sequence analysis of the target region of these 5 isolates revealed several mutations in the inter-primer region that extend an existing hairpin structure immediately downstream of the forward primer binding site. Stabilisation of the forward primer with either a tail sequence or cationic spermine units restored the sensitivity of the assay, which suggests that the enhancing effect in the panFMDV-3D assay is due to a more efficient extension of the forward primer. ur results show that primer tailing can alter amplification through various mechanisms that are determined by both the assay and target region. These findings expand our understanding of primer tailing and should enable a more targeted and efficient use of tailed primers.

Development of a high-throughput real time PCR based on a hot-start alternative for Pfu mediated by quantum dots

Hot start (HS) PCR is an excellent alternative for high-throughput real time PCR due to its ability to prevent nonspecific amplification at low temperature. Development of a cost-effective and simple HS PCR technique to guarantee high-throughput PCR specificity and consistency still remains a great challenge. In this study, we systematically investigated the HS characteristics of QDs triggered in real time PCR with EvaGreen and SYBR Green I dyes by the analysis of amplification curves, standard curves and melting curves. Two different kinds of DNA polymerases, Pfu and Taq, were employed. Here we showed that high specificity and efficiency of real time PCR were obtained in a plasmid DNA and an error-prone two-round PCR assay using QD-based HS PCR, even after an hour preincubation at 50 °C before real time PCR. Moreover, the results obtained by QD-based HS PCR were comparable to a commercial Taq antibody DNA polymerase. However, no obvious HS effect of QDs was found in real time PCR using Taq DNA polymerase. The findings of this study demonstrated that a cost-effective high-throughput real time PCR based on QD triggered HS PCR could be established with high consistency, sensitivity and accuracy.

A hot start alternative for high-fidelity DNA polymerase amplification mediated by quantum dots

Quantum dots (QDs) are of great interest due to their unique chemical and physical properties. Recently, a hot start (HS) polymerase chain reaction (PCR) amplification performance based on QDs with a high-fidelity Pfu DNA polymerase has been reported. However, whether QDs can trigger HS effects with other high-fidelity or conventional DNA polymerases is yet to be understood. In the present study, we studied the QD-triggered HS effects with four high-fidelity and three conventional DNA polymerases, and the HS effect comparisons among them were also made. It was found that QDs could trigger a distinct HS PCR amplification performance with all the four tested high-fidelity DNA polymerases, and specific target DNA could be well amplified even if the PCR mixture was pre-incubated for 2 h at 50°C. On the contrary, the HS effects were not prominent with all the three conventional Taq DNA polymerases. Specifically, the fidelity of Pfu is not sacrificed in the presence of QDs, even after a 1 h pre-incubation at 50°C before PCR. Furthermore, the electrophoresis results preliminarily demonstrated that QDs prefer to adsorb high-fidelity polymerases rather than conventional ones, which might result in the QD-triggered HS effects on PCR performance by using high-fidelity DNA polymerases.