A Damping System for Syringe Pumps Used for Microdialysis with On-Line Electrochemical Detection

Online ascorbate sensing reveals oxidative injury occurrence in inferior colliculus in salicylate-induced tinnitus animal model

Tinnitus is a widespread and serious clinical and social problem. Although oxidative injury has been suggested to be one of pathological mechanisms in auditory cortex, whether this mechanism could be applied to inferior colliculus remains unclear. In this study, we used an online electrochemical system (OECS) integrating in vivo microdialysis with selective electrochemical detector to continuously monitor the dynamics of ascorbate efflux, an index of oxidative injury, in inferior colliculus of living rats during sodium salicylate-induced tinnitus. We found that OECS with a carbon nanotubes (CNTs)-modified electrode as the detector selectively responses to ascorbate, which is free from the interference from sodium salicylate and MK-801 that were used to induce tinnitus animal model and investigate the N-methyl-d-aspartate (NMDA) receptor mediated excitotoxicity, respectively. With the OECS, we found that the extracellular ascorbate level in inferior colliculus significantly increases after salicylate administration and such increase was suppressed by immediate injection of NMDA receptor antagonist MK-801. In addition, we found that salicylate administration significantly increases the spontaneous and sound stimuli evoked neural activity in inferior colliculus and that the increases were inhibited by the injection of MK-801. These results suggest that oxidative injury may occur in inferior colliculus following salicylate-induced tinnitus, which is closely relevant to the NMDA-mediated neuronal excitotoxicity. This information is useful for understanding the neurochemical processes in inferior colliculus involved in tinnitus and its related brain diseases.

Microdialysis-coupled enzymatic microreactor for in vivo glucose monitoring in rats

Continuous glucose monitoring (CGM) is an important aid for diabetic patients to optimize glycemic control and to prevent long-term complications. However, current CGM devices need further miniaturization and improved functional performance. We have coupled a previously described microfluidic chip with enzymatic microreactor (EMR) to a microdialysis probe and evaluated the performance of this system for monitoring subcutaneous glucose concentration in rats. Nanoliter volumes of microdialysis sample are efficiently reacted with continuously supplied glucose oxidase (GOx) solution in the EMR. The hydrogen peroxide produced is amperometrically detected at a (polypyrrole (PPy)-protected) thin-film Pt electrode. Subcutaneous glucose concentration was continuously monitored in anesthetized rats in response to intravenous injections of 20% glucose (w/v), 5 U/kg insulin, or saline as a control. In vitro evaluation showed a linear range of 2.1-20.6 mM and a sensitivity of 7.8 ± 1.0 nA/mM (n = 6). The physical lag time between microdialysis and the analytical signal was approximately 18 min. The baseline concentration of blood glucose was 10.2 ± 2.3 mM. After administering glucose to the rats, glucose levels increased by about 2 mM to 12.1 ± 2.3 mM in blood and 11.9 ± 1.5 mM in subcutaneous interstitial fluid (ISF). After insulin administration, glucose levels decreased by about 8 mM relative to baseline to 2.1 ± 0.6 mM in blood and 2.1 ± 0.9 mM in ISF. A microfluidic device with integrated chaotic mixer and EMR has been successfully combined with subcutaneous microdialysis to continuously monitor glucose in rats. This proof-of-principle demonstrates the feasibility of improved miniaturization in CGM based on microfluidics.

Hybridization of bioelectrochemically functional infinite coordination polymer nanoparticles with carbon nanotubes for highly sensitive and selective in vivo electrochemical monitoring

This study demonstrates the formation of a three-dimensional conducting framework through hybridization of bioelectrochemically active infinite coordination polymer (ICP) nanoparticles with single-walled carbon nanotubes (SWNTs) for highly sensitive and selective in vivo electrochemical monitoring with combination with in vivo microdialysis. The bioelectrochemically active ICP nanoparticles are synthesized through the self-assembly process of NAD(+) and Tb(3+), in which all biosensing elements including an electrocatalyst (i.e., methylene green, MG), cofactor (i.e., β-nicotinamide adenine dinucleotide, NAD(+)), and enzyme (i.e., glucose dehydrogenase, GDH) are adaptively encapsulated. The ICP/SWNT-based biosensors are simply prepared by drop-coating the as-formed ICP/SWNT nanocomposite onto a glassy carbon substrate. Electrochemical studies demonstrate that the simply prepared ICP/SWNT-based biosensors exhibit excellent biosensing properties with a higher sensitivity and stability than the ICP-based biosensors prepared only with ICP nanoparticles (i.e., without hybridization of SWNTs). By using a GDH-based electrochemical biosensor as an example, we demonstrate a technically simple yet effective online electroanalytical platform for continuously monitoring glucose in the brain of guinea pigs with the ICP/SWNT-based biosensor as an online detector in a continuous-flow system combined with in vivo microdialysis. Under the experimental conditions employed here, the dynamic linear range for glucose with the ICP/SWNT-biosensor is from 50 to 1000 μM. Moreover, in vivo selectivity investigations with the biosensors prepared by the GDH-free ICPs reveal that ICP/SWNT-based biosensors are very selective for the measurement of glucose in the cerebral system. The basal level of glucose in the microdialysates from the striatum of guinea pigs is determined to be 0.31 ± 0.03 mM (n = 3). The study offers a simple route to the preparation of electrochemical biosensors, which is envisaged to be particularly useful for probing the chemical events involved in some physiological and pathological processes.

Bubble-induced damping in displacement-driven microfluidic flows

Bubble damping in displacement-driven microfluidic flows was theoretically and experimentally investigated for a Y-channel microfluidic network. The system was found to exhibit linear behavior for typical microfluidic flow conditions. The bubbles induced a low-pass filter behavior with a characteristic cutoff frequency that scaled proportionally with flow rate and inversely with bubble volume and exhibited a minimum with respect to the relative resistances of the connecting channels. A theoretical model based on the electrical circuit analogy was able to predict experimentally observed damping of fluctuations with excellent agreement. Finally, a flowmeter with high resolution (0.01 μL/min) was demonstrated as an application of the bubble-aided stabilization. This study may aid in the design of many other bubble-stabilized microfluidic systems.

Rational design and one-step formation of multifunctional gel transducer for simple fabrication of integrated electrochemical biosensors

This study demonstrates a new strategy to simplify the biosensor fabrication and thus minimize the biosensor-to-biosensor deviation through rational design and one-step formation of a multifunctional gel electronic transducer integrating all elements necessitated for efficiently transducing the biorecognition events to signal readout, by using glucose dehydrogenase (GDH) based electrochemical biosensor as an example. To meet the requirements for preparing integrated biosensors and retaining electronic and ionic conductivities for electronically transducing process, ionic liquids (ILs) with enzyme cofactor (i.e., oxidized form of nicotinamide adenine dinucleotide) as the anion were synthesized and used to form a bucky gel with single-walled carbon nanotubes, in which methylene green electrocatalyst was stably encapsulated for the oxidation of nicotinamide adenine dinucleotide. With such kind of rationally designed and one-step-formed multifunctional gel as the electronic transducer, the GDH-based electrochemical biosensors were simply fabricated by polishing the electrodes onto the gel followed by enzyme immobilization. This capability greatly simplifies the biosensor fabrication, prolongs the stability of the biosensors, and, more remarkably, minimizes the biosensor-to-biosensor deviation. The relative standard deviations obtained both with one electrode for the repeated measurements of glucose and with the different electrodes prepared with the same method for the concurrent measurements of glucose with the same concentration were 3.30% (n = 7) and 4.70% (n = 6), respectively. These excellent properties of the multifunctional gel-based biosensors substantially enable them to well-satisfy the pressing need of rapid measurements, for example, environmental monitoring, food analysis, and clinical diagnoses.

Online electrochemical measurements of Ca2+ and Mg2+ in rat brain based on divalent cation enhancement toward electrocatalytic NADH oxidation

This study describes a novel electrochemical approach to effective online monitoring of electroinactive Ca(2+) and Mg(2+) in the rat brain based on the current enhancement of divalent cations toward electrocatalytic oxidation of NADH. Cyclic voltammetry for NADH oxidation at the electrodes modified with the polymerized film of toluidine blue O (TBO) reveals that the current of such an electrocatalytic oxidation process is remarkably enhanced by divalent cations such as Ca(2+) and Mg(2+). The current enhancement is thus used to constitute an electrochemical method for the measurements of Ca(2+) and Mg(2+) in a continuous-flow system with the polyTBO-modified electrode as the detector. Upon being integrated with in vivo microdialysis, the electrochemical method is successfully applied in investigating on cerebral Ca(2+) and Mg(2+) of living animals in two aspects: (1) online simultaneous measurements of the basal levels of Ca(2+) and Mg(2+) in the brain of the freely moving rats by using ethyleneglcol-bis(2-aminoethylether) tetraacetic acid (EGTA) as the selective masking agent for Ca(2+) to differentiate the net current responses selectively for Ca(2+) and Mg(2+); and (2) online continuous monitoring of the cerebral Mg(2+) following the global ischemia by using Ca(2+)-masking agent (i.e., EGTA) to completely eliminate the interference from Ca(2+). Compared with the existing methods for the measurements of cerebral Ca(2+) and Mg(2+), the method demonstrated here is advantageous in terms of its simplicity both in instrumentation and in the experimental procedures and near real-time nature, and is thus highly anticipated to find wide applications in understanding of chemical events involved in some physiological and pathological processes.

Physiologically relevant online electrochemical method for continuous and simultaneous monitoring of striatum glucose and lactate following global cerebral ischemia/reperfusion

This study demonstrates a new electroanalytical method with a high physiological relevance for simultaneous online monitoring of glucose and lactate in the striatum of the rat brain following global cerebral ischemia/reperfusion. The online analytical method is based on the efficient integration of in vivo microdialysis sampling with an online selective electrochemical detection with the electrochemical biosensors with dehydrogenases, i.e., glucose and lactate dehydrogenases, as recognition elements. The dehydrogenase-based electrochemical biosensors are developed onto the dual split-disk plastic carbon film (SPCF) electrodes with methylene green (MG) adsorbed onto single-walled carbon nanotubes (SWNTs) as the electrocatalyst for the oxidation of dihydronicotiamide adenine dinucleotide (NADH) at a low potential of 0.0 V (vs Ag/AgCl). Artificial cerebrospinal fluid (aCSF) containing NAD(+) is externally perfused from a second pump and online mixed with the brain microdialysates to minimize the variation of pH that occurred following the cerebral ischemia/reperfusion and to supply NAD(+) cofactor and O(2) for the enzymatic reactions of dehydrogenases and ascorbate oxidase, respectively. As a result, the developed online electroanalytical method exhibits a high selectivity against the electrochemically active species endogenously existing in the cerebral systems and a high tolerance against the variation of pH and O(2) following cerebral ischemia/reperfusion. This property, along with the good linearity and a high stability toward glucose and lactate as well as little cross-talk between two biosensors, substantially makes this method possible for the continuous, simultaneous, and online monitoring of glucose and lactate in the rat brain following global cerebral ischemia/reperfusion. This study establishes a new and effective platform for the investigation of the energy metabolism in physiological and pathological processes.

Continuous On-Line Monitoring of Extracellular Ascorbate Depletion in the Rat Striatum Induced by Global Ischemia with Carbon Nanotube-Modified Glassy Carbon Electrode Integrated into a Thin-Layer Radial Flow Cell

This study describes a novel analytical system integrating in vivo microdialysis sampling with a radial thin-layer flow cell with a single-walled carbon nanotube (SWNT)-modified glassy carbon electrode as working electrode for continuous and on-line monitoring of ascorbate depletion in the rat striatum induced by global ischemia. The SWNTs, especially those after vacuum heat treatment at 500 degrees C, are found to be able to enhance the electron-transfer kinetics of ascorbate oxidation at a low potential (ca. -50 mV) and possess a strong ability against electrode fouling. These properties essentially make it possible to determine ascorbate with a good stability and high selectivity against catecholamines and their metabolites and other electroactive species of physiological levels. While being integrated with in vivo microdialysis to assemble an on-line analytical system, the electrode is proved useful for continuous and sensitive monitoring of the basal dialysate level of ascorbate and its depletion in the rat striatum induced by global ischemia. The basal dialysate level of ascorbate is determined to be 5.0 +/- 0.5 microM (n = 5) and a 50 +/- 10% (n = 3) depletion is recorded for the basal ascorbate after 4 h of global ischemia.

Continuous on-line measurement of cerebral hydrogen peroxide using enzyme-modified ring-disk plastic carbon film electrode

An amperometric method suitable for the continuous on-line measurement of cerebral hydrogen peroxide from a microdialysate has been successfully performed for the first time by using an enzyme-modified ring-disk plastic carbon film electrode (PCFE) in a thin-layer radial flow cell. PCFE consists of a ring electrode modified with horseradish peroxidase to detect H2O2 at 0.0 V (vs Ag/ AgCl) and a disk electrode coated with ascorbate oxidase (AOx) to preoxidize ascorbic acid (AA) and thus suppress interference via direct oxidation. Analytes in solution (brain dialysates or standards) are mixed on-line with a phosphate-buffered solution containing dissolved oxygen and chelating agent, EDTA. The buffered solution is used to provide the O2 necessary for the AOx catalytic reaction, stabilize the changes in dialysate pH that are associated with the in vivo formation of H2O2, and remove heavy metal ion impurities and thus suppress reactions between AA and H2O2. This procedure enables trace levels of H2O2 to be readily monitored, virtually interference-free from physiological levels of AA, uric acid, electroactive neurotransmitters and their principle metabolites, in a continuous-flow system.