Open-tubular capillary electrochromatography with an on-line ion trap storage/reflectron time-of-flight mass detector for ultrafast peptide mixture analysis

Integration of an on-line protein digestion microreactor to a nanoelectrospray emitter for peptide mapping

A method for integrating nanoelectrospray mass spectrometry with a microreactor for on-line digestion and fast peptide mass mapping from dilute protein samples is presented. Fused silica capillaries (i.d. 50 microm, o.d. 360 microm) are employed as the digestion microreactor and the nanoelectrospray emitter by immobilizing trypsin onto the surface of the inner wall of the fused silica capillary tubing. The procedure is demonstrated using solutions of 1pmol/mul angiotensin II, cytochrome c, hemoglobin, and beta-casein. Because the inner walls of the capillaries are modified by covalent chemical bonds, the adsorption of peptides and proteins to the inner walls of the capillaries is suppressed. This procedure was performed with solutions as dilute as 1fmol/mul (1nM) cytochrome c. This method shows generation of tryptic peptides with sequence coverage up to 90% within minutes; trypsin autolysis products are not detected. In addition, the immobilized enzyme can be cleaned easily, enabling the microreactor to be reused for nanoelectrospray.

Monolithic silica columns with mixed mode of hydrophilic interaction and weak anion-exchange stationary phase for pressurized capillary electrochromatography

A silica-based monolithic column as polar stationary phase is proposed for pressurized CEC (pCEC). The monolithic silica matrix from a sol-gel process was chemically modified by 3-aminopropyltrimethoxysilane to produce a column for hydrophilic interaction applications. The amino groups on the surface of the polar stationary phase generated anodic EOF under acidic conditions and served at the same time as a weak anion-exchanger. The anion solutes such as nucleotides were separated by the mixed mode mechanism, which comprised hydrophilic interaction, weak anion-exchange, and electrophoresis. The influences of buffer concentration and organic modifier content on the separation of nucleotides by pCEC have been investigated. In addition, the monolithic silica columns were also able to separate various polar compounds such as phenols, nucleic acid bases, and nucleosides in the hydrophilic interaction CEC mode.

Advances in the analysis of proteins and peptides by capillary electrophoresis with matrix-assisted laser desorption/ionization and electrospray-mass spectrometry detection

High throughput, outstanding certainty in peptide/protein identification, exceptional resolution, and quantitative information are essential pillars in proteome research. Capillary electrophoresis (CE) coupled to mass spectrometry (MS) has proven to meet these requirements. Soft ionization techniques, such as matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI), have paved the way for the story of success of CE-MS in the analysis of biomolecules and both approaches are subject of discussion in this article. Meanwhile, CE-MS is far away from representing a homogeneous field. Therefore the review will cover a vast area including the coupling of different modes of CE (capillary zone electrophoresis, capillary isoelectric foscusing, capillary electrochromatography, micellar electrokinetic chromatography, nonaqueous capillary electrophoresis) to MS as well as on-line preconcentration techniques (transient capillary isotachophoresis, solid-phase extraction, membrane preconcentration) applied to compensate for restricted detection sensitivity. Special attention is given to improvements in interfacing, namely addressing nanospray and coaxial sheath liquid design. Peptide mapping, collision-induced dissociation with subsequent tandem MS, and amendments in mass accuracy of instruments improve information validity gained from MS data. With 2-D on-line coupling of liquid chromatography (LC) and CE a further topic will be discussed. A special section is dedicated to recent attempts in establishing CE-ESI-MS in proteomics, in the clinical and diagnostic field, and in the food sector.

Open tubular capillary electrochromatography using capillaries coated with films of alkanethiol-self-assembled gold nanoparticle layers

We have used alkanethiol self-assembly and dithiol layer-by-layer (LBL) self-assembly processes to prepare an Au nanoparticle (NP)-coated open tubular capillary electrochromatography (OTCEC) column for the separation of three neutral steroid drugs (testosterone, progesterone, and testosterone propionate). The CEC column was fabricated through LBL self-assembly of Au NPs on a 3-aminopropyltrimethoxysilane (APTMS)-modified fused-silica capillary and subsequent surface functionalization of the Au NPs through self-assembly of alkanethiols. We investigated the electrochromatographic properties of the resulting Au NP-coated CEC column using a "reversed phase" test mixture of three steroid drugs. We found that the key factors affecting the separation performance were the number of Au NP layers, the length of the carbon-atom chain of the alkanethiol self-assembled on the Au NPs, the percentage of organic modifier, and the pH of the running electrolyte. This study reveals that the self-assembly of alkanethiols and dithiols onto Au NPs provides stationary phases for CEC separation that are easy to prepare and whose retention behavior is highly controllable and reproducible. We believe that our findings will contribute to further studies of the application of nanotechnology to separation science.

Alkylthiol gold nanoparticles in sol-gel-based open tubular capillary electrochromatography

A novel open-tubular capillary electrochromatography (OTCEC) column was prepared by immobilizing dodecanethiol gold nanoparticles on prederivatised fused-silica capillary columns with sol-gel technology. 3-Mercaptopropyl-trimethoxysilane (MPTMS) was selected as sol-gel precursor to develop a sol-gel layer on the inner wall of the capillary, prior to assembly of dodecanethiol gold nanoparticles onto the generated sol-gel layer through specific interaction between the gold nanoparticles and surface terminating thiol groups. The electrochromatographic behaviour of the sol-gel gold nanoparticle capillary was compared with a gold nanoparticle capillary prepared via MPTMS surface functionalisation, through variation of the percentage of the organic modifier, pH, and separation voltage. Efficient separation for a "reversed-phase" test mixture of thiourea, naphthalene, and biphenyl and for selected polycyclic aromatic hydrocarbons (PAHs) was obtained on the sol-gel based gold nanoparticle capillaries. OTCEC separations of three selected drug substances (propiophenone, benzoin, and warfarin) were also demonstrated. Scanning electron microscopy was used for the characterization of the sol-gel gold nanoparticle capillary surface. The results confirm that dodecanethiol gold nanoparticles, bound on the sol-gel-based inner layer of fused-silica capillary, can provide sufficient solute-bonded phase interactions for OTCEC with reproducible retention as well as characteristic reversed-phase behaviour.

A sheath-flow nanospray interface for capillary electrophoresis/mass spectrometry

We have developed a novel sheath-flow interface for low-flow electrospray ionization mass spectrometry (ESI-MS) and capillary electrophoresis/electrospray mass spectrometry (CE/ESI-MS). The interface is composed of two capillaries. One is a tapered fused-silica ESI emitter suitable for microliter and nanoliter flow rate electrospray and the other is a tail-end gold-coated CE separation column that is inserted into the emitter. A sheath liquid is supplied between the column and the emitter capillaries. The gold coating and the sheath liquid are used as the conducting media for ESI and the CE circuit. This novel design was initially evaluated by an infusion ESI-MS analysis of the most common antiretroviral dideoxynucleosides, followed by CE/MS coupling analysis of several antidepressant drugs. With infusion studies, the effects of the sheath liquid and the sample flow rates on detection sensitivity and signal stability were investigated. For an emitter with an internal diameter of 30 microm, the optimum flow rates for the sheath and the sample were 200 and 300 nL/min, respectively. The main improvement of this approach in comparison with conventional sheath liquid approaches using an ionspray interface is the gain in sensitivity. Sensitivities were three times better for dideoxynucleosides analyzed by infusion and 12 times higher for antidepressant drugs analyzed by CE/MS with this interface compared with ionspray. The emitter is durable, disposable, and simple to fabricate.

State-of-the-art of the hyphenation of capillary electrochromatography with mass spectrometry

The high separation efficiency and loading capacity of capillary electrochromatography (CEC) make it an attractive separation mode for coupling with mass spectrometry (MS), which has the ability to unambiguously identify analytes with high selectivity and sensitivity. We present an overview of recent advances on both instrumentation and separation columns employed in CEC-MS systems. In particular, the main characteristics of the stationary phases, as well as the configurations of the column outlet that are related with the coupling arrangements of the MS ionization sources, are reported. At present, packed columns and conventional electrospray ionization (ESI) sources are mainly employed in CEC-MS. Nevertheless, the use of monolithic capillary columns and nanoelectrospray sources has the potential for wide acceptance in the next future. Moreover, the main features of several mass analyzers including ion trap, quadrupole, time-of-flight, magnetic sector, and Fourier transform-ion cyclotron resonance are examined. Finally, current applications of this technology, mainly in the pharmaceutical field and proteomics, are reviewed.

Sol–gel stationary phases for capillary electrochromatography

A review is presented on the current state of the art and future trends in the development of sol-gel stationary phases for capillary electrochromatography (CEC). The design and synthesis of stationary phases with prescribed chromatographic and surface charge properties represent challenging tasks in contemporary CEC research. Further developments in CEC as a high-efficiency liquid-phase separation technique will greatly depend on new breakthroughs in the area of stationary phase development. The requirements imposed on CEC stationary phase performance are significantly more demanding compared with those for HPLC. The design of CEC stationary phase must take into consideration the structural characteristics that will provide not only the selective solute/stationary phase interactions leading to chromatographic separations but also the surface charge properties that determine the magnitude and direction of the electroosmotic flow responsible for the mobile phase movement through the CEC column. Therefore, the stationary phase technology in CEC presents a more complex problem than in conventional chromatographic techniques. Different approaches to stationary phase development have been reported in contemporary CEC literature. The sol-gel approach represents a promising direction in this important research. It is applicable to the preparation of CEC stationary phases in different formats: surface coatings, micro/submicro particles, and monolithic beds. Besides, in the sol-gel approach, appropriate sol-gel precursors and other building blocks can be selected to create a stationary phase with desired structural and surface properties. One remarkable advantage of the sol-gel approach is the mild thermal conditions under which the stationary phase synthesis can be carried out (typically at room temperature). It also provides an effective pathway to integrating the advantageous properties of organic and inorganic material systems, and thereby enhancing and fine-tuning chromatographic selectivity of the created hybrid organic-inorganic stationary phases. This review focuses on recent developments in the design, synthesis, characterization, properties, and applications of sol-gel stationary phases in CEC.

Separation of peptides by pressurized capillary electrochromatography

A pressurized electrochromatography (pCEC) instrument with gradient capability was used in this work for separation of peptides. Three separation modes, namely, pCEC, high-performance liquid chromatography and capillary electrophoresiscan be carried out with the instrument. In pCEC mode, the mobile phase is driven by both electroosmotic flow and pressurized flow, facilitating fine-tuning in selectivity of neutral and charged species. A continuous gradient elution can be carried out conveniently on this instrument, which demonstrates that it is more powerful than isocratic pCEC for separation of complicated samples. The effects of applied voltage, supplementary pressure and ion-pairing agents on separation of peptides in gradient pCEC were investigated. The effects of flow-rate of the pump and the volume of the mixer on resolution were also evaluated.

Analytical separations using molecular micelles in open-tubular capillary electrochromatography

Open-tubular capillary electrochromatography (OT-CEC) is an alternative approach to conventional CEC. The primary advantage of OT-CEC is the elimination of problems associated with frits and silica particles in conventional CEC. This report is an investigation of the utility of using a polymeric surfactant (molecular micelle) for OT-CEC. In this approach, fused-silica capillaries coated with thin films of physically adsorbed charged polymers are developed by use of a polyelectrolyte multilayer (PEM) coating procedure. The PEM coating is constructed in situ by alternating rinses with positively and negatively charged polymers, where the negatively charged polymer is a molecular micelle. This can offer a number of advantages for separation of hydrophobic analytes. In this study, poly(diallyldimethylammonium chloride) was used as the cationic polymer and poly(sodium N-undecanoyl-L-glycinate) was used as the anionic polymer for PEM coating. The performance of the modified capillaries as a separation medium is evaluated by use of seven benzodiazepines as analytes. The run-to-run, day-to-day, week-to-week, and capillary-to-capillary reproducibilities of electroosmotic flow are very good with relative standard deviation values of less than 1% in all cases. In addition, the chromatographic performance of the monomeric form of the molecular micelle is compared for the separation of these analytes. The PEM-coated capillary was remarkably robust with more than 200 runs accomplished in this study. Strong stability against extreme pH values was also observed. The general utility of this approach is discussed in detail.

Electroosmotic flow controllable coating on a capillary surface by a sol-gel process for capillary electrophoresis

A simple coating procedure employing a sol-gel process to modify the inner surface of a bare fused-silica capillary with a positively charged quaternary ammonium group is established. Scanning electron microscopic studies reveal that a smooth coating with 1 to approximately 2 microm thickness can be obtained at optimized coating conditions. With 40 mM citrate as a running electrolyte, the plot of electroosmotic flow (EOF) versus pH shows a unique three-stage EOF pattern from negative to zero and then to positive over a pH range of 2.5 to 7.0. At pH above 5.5, the direction of the EOF is from the anode to the cathode, as is the case in a bare fused-silica capillary, and the electroosmotic mobility increases as the pH increases. However, the direction of the EOF is reversed at pH below 4.0. Over the pH range of 4.0 to 5.5, zero electroosmotic mobility is obtained. Such a three-stage EOF pattern has been used to separate six aromatic acids under suppressed EOF and to separate nitrate and nitrite with the anions migrating in the same direction as the EOF. The positively charged quaternary ammonium group on the coating was also utilized to minimize the adsorption problem during the separation of five basic drugs under suppressed EOF and during the separation of four basic proteins with the cations migrate in the opposite direction as the EOF. Also, the stability and reproducibility of this column are good.

Application of CEC procedures for the analysis of synthetic peptides: characterization of linear immunogenic peptides that mimic a HIV-1 gp120 epitope

In this study, we describe the application of a new analytical procedure based on capillary electrochromatographic(CEC) techniques for the characterization of different basic and acidic peptides using isocratic eluent conditions containing acetonitrile and ammonium acetate buffers of different molarities between pH 3.8 and 5.2. In particular,10 immunogenic peptide analogs with isoelectric points ranging from 3.7 to 10.1 were investigated; nine of these peptides, 1-9, were truncated analogs of the parent peptide, 10, which is a peptidomimetic related to a HIV-1 gp120 epitope. Several of these peptides have the propensity to form alpha-helical secondary structures in solution. Electrochromatographic separations of these peptides were achieved with packed fused silica capillaries(25 cm packed length, 100 microm i.d.) containing 3 microm n-octadecylsilica particles. The influence of temperature on the CEC elution behavior of these peptides, as well as the impact of changes in the eluent composition, e.g. pH, buffer concentration and acetonitrile content, were examined. The results confirm that improvements in the resolution and analysis of synthetic peptides by CEC procedures result from the increase inelectroosmotic flow (EOF) as the temperature is increased. These findings emphasize the dominant influence of the temperature-dependent viscosity parameter, eta, on the EOF and thus on peptide resolution in CEC. Moreover, these investigations have shown that eluent properties can be specifically chosen to favor either electrophoretic mobility or chromatographic retention, with the overall CEC selectivity peptides of different sequence or composition reflecting the summated contributions from both separation mechanisms. Over the pH range 4.0-5.0, and using eluents with ionic strengths ranging from 6.2 to 15 mM ammonium acetate but containing a fixed volume fraction, psi, of acetonitrile above psi = 0.40, the CEC retention behavior of peptides 1-10 correlated with a linear relationship linking the retention coefficient, kappta(cec), and the differential frictional size-to-mass ratio parameter, Xi(fric), of these peptides. However, using eluents with a low acetonitrile content and low pH values, linear correlations were also observed between the incremental retention coefficient, Delta(Kappa)cec, and the product term [-0.66(Delta(Sigma[Xn]) log(Mi/Mj)], which links the difference in intrinsic hydrophobicities and molecular masses of two peptides, Pi and Pj. This study thus demonstrates the power of CEC procedures in the analysis of synthetic bioactive peptides and provides a general experimental framework to evaluate,using CEC procedures, the influence of the key molecular attributes of peptides on their structure-retention dependencies.Finally, these studies provide additional, practical insights into the use of CEC procedures for the analysis, resolution and biophysical characterization of closely related peptide analogs derived from solid-state peptide synthesis under conditions of different eluent composition or temperature.

Peptide analysis by rapid, orthogonal technologies with high separation selectivities and sensitivities

This article examines the current status of peptide analysis by orthogonal micro-/nano-separation strategies, with emphasis on the complementary use of high performance capillary liquid chromatography (micro-HPLC), capillary zonal electrophoresis (HPCZE), open tubular capillary electrochromatography (ot -CEC) and packed capillary electrochromatography (p -CEC). The ability to interface these techniques with mass spectroscopic (MS) procedures has enabled substantial progress to be made in the analysis of very small quantities of peptides, as well as proteins and other bio-macromolecules. As a consequence, the staged application of these high resolution techniques as part of the standardisation of biological products via robust, sensitive protocols is rapidly becoming a reality. Recent conceptual and theoretical advances have also allowed improved levels of prediction and optimisation of these procedures. Since significant differences in selectivity can be achieved with micro-HPLC, HPCZE and HPCEC respectively, collectively these sophisticated techniques provide unprecedented opportunities for the rapid, orthogonal and sensitive separation of complex mixtures of peptides and proteins. Several advantages of using these technologies in tandem are highlighted.

Reversed-phase electrochromatography of amino acids and peptides using porous polymer monoliths

Efficient and rapid separation of minute levels of amino acids and bioactive peptides is of significant importance in the emerging field of proteomics as well as in the clinical and pharmaceutical arena. We have developed novel UV-initiated acrylate-based porous polymer monoliths as stationary phases for capillary- and chip-electrochromatography of cationic, anionic, and neutral amino acids and peptides, followed by absorbance or laser-induced fluorescence detection. The rigid monoliths are cast-to-shape and are tunable for charge and hydrophobicity. For separations at low pH, monoliths containing quaternary amine moieties were used to achieve high electroosmotic flow, and for high pH separations monoliths with acidic sulfonic acid groups were employed. Efficient and reproducible separations of phenylthiohydantoin-labeled amino acids, native peptides, and amino acids and peptides labeled with naphthalene-2,3-dicarboxaldehyde (NDA) were achieved using both negatively- and positively-charged polymer monoliths in capillaries. Separation efficiencies in the range of 65,000-371,000 plates/m were obtained with capillary electrochromatography. Buffer composition and the degree of column hydrophobicity were studied systematically to optimize separations. The monoliths were also cast in the microchannels of glass chips and electrochromatographic separation followed by laser-induced fluorescence detection of three NDA-labeled bioactive peptides was obtained.

Advances in column technology and instrumentation in capillary electrochromatography

Capillary electrochromatography (CEC) is an emerging technique gaining increased interest. Improvement of instrumentation and column technology will be of prime importance for the further development of this technique and its use in validated methods. In this paper, developments in column technology and instrumentation for CEC are reviewed with emphasis on developments within the last 3 years. Attention is directed to the employment of stationary phases specifically designed for CEC, the use of soft and rigid gels in place of packings, fritless packed capillaries, column dimensions, the optimization of injection and detection parameters, and gradient elution CEC.

Use of on-line mass spectrometric detection in capillary electrochromatography

Capillary electrochromatography (CEC) is a liquid phase analytical separation technique that is generally carried out with packed capillary columns by electroosmotically driven mobile phase at high electric field strength. The analytes are separated by virtue of the differences in their distribution between the mobile and stationary phases and, if charged in their electrophoretic mobilities as well. It is thus considered a hybrid of liquid chromatography and capillary electrophoresis and is expected to combine the high peak efficiency of capillary zone electrophoresis (CZE) with the versatility and loading capacity of HPLC. This review explores the potential use of on-line mass spectrometric detection for CEC. It discusses key design issues that focus on the physical and electrical arrangement of the CEC column with respect to the electrospray orifice inlet. The salient features of the sheathless, sheath flow and liquid junction interfaces that are frequently employed while coupling a CEC column to an electrospray ionization mass spectrometry system are also highlighted. Possible configurations of the CEC column outlet that would obviate the need for pressurizing the capillary column are also presented. While coupling CEC with MS both the nature of the interface and the configuration of the column outlet will determine the optimal arrangement. The review also discusses bandspreading that occurs when a connecting tube is employed to transfer mobile phase from the column outlet to the atmospheric region of the electrospray source with a concomitant loss in sensitivity. Selected examples that highlight the potential of this technique for a wide range of applications are also presented.

Specific applications of capillary electrochromatography to biopolymers, including proteins, nucleic acids, peptide mapping, antibodies, and so forth

Separation of biopolymers is an obvious application of capillary electrochromatography (CEC) technology, since speed and resolution should increase significantly over high-performance liquid chromatography (HPLC). All too often, HPLC chromatograms of polymers show poorly resolved envelopes of overlapping peaks from oligomers. The practical limitation of column length and pressure drop has hindered development of high resolution separations of many polymers in HPLC. However, this generally applies only to packed beds of small particles, and not to continuous (or monolithic) beds, as introduced by Hjerten et al. [S. Hjerten, Ind. Eng. Chem. Res. 38 (1999) 1205; S. Hjerten, C. Ericson, Y.-M. Li, R. Zhang, Biomed. Chromatogr. 12 (1998) 120; C. Ericson, S. Hjerten, Anal. Chem. 71 (1999) 1621; J.-L. Liao, N. Chen, C. Ericson, S. Hjerten, Anal. Chem. 68 (1996) 3468; S. Hjerten, A. Vegvari, T. Srichaiyo, H.-X. Zhang, C. Ericson, D. Eaker, J. Capillary. Elec. 5 (1998) 13; C. Ericson, J.-L. Liao, K. Nakazato, S. Hjerten, J. Chromatogr. A 767 (1997) 33; S. Hjerten, D. Eaker, K. Elenbring, C. Ericson, K. Kubo, J.-L. Liao, C.-M. Zeng, P.-A. Lidstrom, C. Lindh, A. Palm, T. Srichiayo, L. Valtcheva, R. Zhang, Jpn. J. Electroph. 39 (1995) 1]. Throughout this review we will refer to such packings as monolithic or continuous beds, but they are identical type packings, formed by the in situ polymerization in the capillary or column. CEC capillaries can be much longer, and contain smaller particles than is practical for HPLC. This improves resolution significantly. CEC is able to capitalize on existing mobile phase technology developed over 30 years to improve separations. The requirement that the mobile phase simultaneously promote the separation and mobile phase mobility needs to be considered. In RPLC, this dual role is not much of a problem. It may be much more important in other modes, particularly ion-exchange (IEC). As the field develops, it is becoming clear that CEC is not just a simple extension of HPLC. Instruments, column technology and operating optima are clearly different than HPLC. CEC will develop into its own unique field. Open tubular HPLC is almost precluded by the high pressures required for forcing liquids through 10 microm or smaller capillaries. Electroosmotic pumping (EOF) avoids the pressure constraints and provides better flow profiles. Compared to HPCE, the ability to interact with the stationary phase may enable separations that would be difficult with electrophoresis alone. Since the mobile phase can be less complex than micellar electrokinetic chromatography (MEKC), CEC also avoids the problem of high background signals from the micelle forming compounds. Thus CEC-MS (mass spectrometry) is expected to be even more powerful than HPCE-MS. The fortuitous, simultaneous development of matrix assisted laser desorption-time of flight MS (MALDI-TOF-MS) technology will enable extension of the mass range to above 100 000 Da. Lack of familiarity is the perhaps the largest liability of CEC compared to other techniques. This paper critically compares the state-of-the-art of CEC with HPLC and HPCE, with a particular emphasis on separation of biopolymers. The goal is to help the reader overcome the fear of the unknown, in this case, CEC.

Instrumentation for capillary electrochromatography

One of the reasons for the immense interest in capillary electrochromatography (CEC) is its feature to combine chromatographic selectivity with the high efficiency and the miniaturization potential of capillary electrophoresis (CE). The capability of commercial CE instruments to run CEC has enforced the readiness of users and researchers to work on this separation technique. Nevertheless, to fully exploit the potential of CEC, a routine CE device can certainly not fulfill all requirements. Two different approaches have been made to overcome this problem. The first was to modify commercial CE instruments for various demands. Pressurization of the packed capillary to prevent "air" bubble formation, gradient elution capabilities and thermostating devices allowing a greater flexibility in column designs have been implemented in CE instruments of several manufacturers. A completely different approach is the development of modular laboratory-made instrumentation dedicated to special CEC requirements. In order to increase mobile phase velocity and thus the speed of analysis the availability of voltages higher than 30 kV was accomplished in some of these devices. Gradient elution was achieved by either coupling of gradient LC systems or an electroosmotic generation of the changing eluent composition. When a pressure gradient is applied between both column ends in addition to the voltage gradient, a hybrid between capillary HPLC and CEC results. This chromatographic mode is named pressure-assisted electrochromatography (PEC). Either CE instruments equipped with additional HPLC pumps or modular laboratory-made devices are suitable for PEC. In CEC, sensitivity for UV detection is rather poor due to the short optical path length for on-column detection in capillary separation techniques. A special cell design with enhanced light path is presented and further principles like, e.g., fluorescence detection and coupling to mass spectrometry are discussed.

Capillary electroendoosmotic chromatography of peptides

This review focuses on the current state of peptide separation by capillary electroendoosmotic chromatography (CEC). When carried out under optimised conditions, peptide separation by CEC methods represents an orthogonal and complementary technique to micro-HPLC (micro-HPLC) and high-performance capillary zone electrophoresis (HPCZE). The origin of the selectivity differences that can be achieved with these three separation techniques (CEC, micro-HPLC and HPCZE), respectively are discussed, and the current limits of performance with CEC methods documented. Peptide separations by CEC methods with n-alkyl bonded silicas or mixed-mode phases are also illustrated. The development of different variants of CEC and pressurised CEC (also commonly referred to in the literature as electrically-assisted micro-HPLC) are examined. The potential of coupling CEC systems to mass spectrometers for real-time analyses of peptides or protein digests has been examined. Several future directions for the application of this technique in phenotype/proteomic and zeomic mapping of naturally occurring peptides and proteins are highlighted.

The possibility of generating high-speed shear-driven flows and their potential application in liquid chromatography

An experimental proof of principle is presented for the possibility to use a shear force field to generate a stable, chromatography enabling fluid flow through micrometer and submicrometer channels without the need for a pressure or a voltage gradient. In our setup, we were able to successfully move a color tracer plug at speeds exceeding 2 cm/s through a 0.125-microm-thick and 4-mm-wide channel, without creating a pressure drop or a pressure buildup. By showing that the speed of microchannel flows can be drastically increased by simply switching from one driving force to another, the presented experiments open the road to the development of a new type of chromatography, referred to as shear-driven chromatography, potentially offering unprecedented separation speeds and resolutions and complying perfectly with the present trend toward the miniaturization and parallelization of analytical separation equipment.

Atmospheric pressure ionization time-of-flight mass spectrometry coupled with fast liquid chromatography for quantitation and accurate mass measurement of five pharmaceutical drugs in human plasma

The quantitative determination and accurate mass measurement of five tricyclic amine pharmaceutical drugs (doxepin, desipramine, imipramine, amitriptyline and trimipramine) fortified in human plasma within a per sample run time of 18 s was accomplished by atmospheric pressure ionization (API) time-of-flight (TOF) mass spectrometry using a turboIonspray liquid chromatography/mass spectrometry (LC/MS) interface coupled with high-performance liquid chromatography (HPLC). The relatively short HPLC separation (18 s) was achieved using a short C18 column (15 x 2.1 mm i.d.) with a high aqueous mobile phase maintained at a flow-rate of 1.4 ml min(-1). An acquisition speed of 0.2 s per spectrum accommodates these fast separation conditions. This method employs a one-step liquid-liquid extraction procedure to isolate the five tricyclic amines from biological matrix components The overall extraction recovery was 75% for desipramine and >90% for the other four tricyclic amines. The lower level of quantitation was 1-2 ng ml(-1) for each compound. The calibration curve was linear from 2 to 100 ng ml(-1) for desipramine and from 1 to 50 ng ml(-1) for the other four tricyclic amines. A deuterated internal standard, imipramine-d3, was used for all five tricyclic amines. Acceptable intra- and inter-assay precision (1.0-17.7%) and accuracy (0.2-14.5%) were obtained. The linear dynamic range was extended to 200 based on a software upgrade for correcting ion current detection saturation. The accurate masses of the five tricyclic amines were determined by on-line LC/TOFMS analyses of biological extracts using two-point internal mass calibration. This was done by infusing a reference standard, Jeffamine D230, post-column into the HPLC effluent. All results showed a mass error not greater than 9 ppm for all the target compounds. These results were obtained from both synthetic mixtures when as little as 100 pg were injected or extracts of spiked human plasma samples with analytical concentration as low as 5 ng ml(-1). The factors influencing accurate mass measurements are discussed.

Capillary electrochromatography/nanoelectrospray mass spectrometry for attomole characterization of peptides

The successful coupling of capillary electrochromatography (CEC) to an ion trap mass spectrometer via a nanoelectrospray interface (nESI) is described. Using a conductively coated tip butted to the end of a CEC column, it was possible to obtain a stable spray without any sheath liquid being employed. Selected small peptides were separated with CEC columns (100 microm i.d./25 cm long) packed with 3 microm Hypersil C8 or C18 bonded silica particles with an eluent composed of ammonium acetate/acetonitrile. Peptide mixtures of desmopressin, peptide A, oxytocin, carbetocin and [Met(5)]-enkephalin were detected in the mid-attomole range, which is the lowest amount analyzed using CEC combined with MS detection. It was also observed that sensitivity can be compromised at higher separation voltages. We demonstrate that CEC/nESI-MS, at the current stage of development, represents one of the most sensitive systems for peptide analysis.

Selectivity in capillary electrokinetic separations

This review gives a survey of selectivity modes in capillary electrophoresis separations in pharmaceutical analysis and bioanalysis. Despite the high efficiencies of these separation techniques, good selectivity is required to allow quantitation or identification of a particular analyte. Selectivity in capillary electrophoresis is defined and described for different separation mechanisms, which are divided into two major areas: (i) capillary zone electrophoresis and (ii) electrokinetic chromatography. The first area describes aqueous (with or without organic modifiers) and nonaqueous modes. The second area discusses all capillary electrophoretic separation modes in which interaction with a (pseudo)stationary phase results in a change in migration rate of the analytes. These can be divided in micellar electrokinetic chromatography and capillary electrochromatography. The latter category can range from fully packed capillaries, via open-tubular coated capillaries to the addition of microparticles with multiple or single binding sites. Furthermore, an attempt is made to differentiate between methods in which molecular recognition plays a predominant role and methods in which the selectivity depends on overall differences in physicochemical properties between the analytes. The calculation of the resolution for the different separation modes and the requirements for qualitative and quantitative analysis are discussed. It is anticipated that selectivity tuning is easier in separation modes in which molecular recognition plays a role. However, sufficient attention needs to be paid to the efficiency of the system in that it not only affects resolution but also detectability of the analyte of interest.

Study of physically absorbed stationary phases for open tubullar capillary electrochromatography

A novel method based on the adsorption of positively charged compounds on the wall of a fused-silica capillary was applied to prepare stationary phases for open tubular capillary electrochromatography (OTCEC). The positively charged substances including cationic surfactant such as cetyltrimethylammonium bromide (CTAB) and basic chiral selectors such as protein, peptide and amino acid were physically adsorbed onto the capillary wall under specially selected conditions. The adsorbed stationary phase of CTAB was used to separate neutral compounds, while the others were used for chiral separations. The run-to-run reproducibility of retention time was rather good with relative standard deviation (RSD) values of less than 2.3%. The separation efficiency was excellent with the highest theoretical plate number of up to 590000/m and the average one above 250000/m. Stored at 2-8 degrees C in the refrigerator, the adsorbed stationary phase can last at least one month. It was observed that the UV spectra for the enantiomers are significantly different due to the diastereomeric interactions of enantiomers with the chiral stationary phase in the detection window. With the use of the same capillary, the same instrument, and the same mobile phase, the superiority of OTCEC over open tubular liquid chromatography (OTLC) and capillary zone electrophoresis (CZE) was illustrated.

Capillary electrophoresis of peptides

This article gives a review of the recent developments in capillary electrophoresis (CE) of peptides. New approaches to the theoretical description of electromigration behavior of peptides are described, and methodological aspects of CE separations of peptides such as selection of separation conditions, sample treatment, suppression of peptide adsorption to the capillary wall and specificities of CE separation modes are discussed. Progress in application of high performance detection schemes, namely laser-induced fluorescence and mass spectrometry, in peptide separations by CE is presented. Applications of different CE techniques, zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography and electrochromatography to peptide analysis, preparation and physicochemical characterization are demonstrated.

Electrokinetic chromatography

The important features of electrokinetic chromatography are critically reviewed. Special emphasis is given to systems using micelles as pseudostationary phase. Short and comprehensive overviews are given on the subjects of separation, comparison with capillary electrochromatography, on-line coupling with mass spectrometry, and developments that are expected in the future. A greater coverage on the subject of improvement of detection sensitivity, specifically by on-line concentration was also contributed.

Capillary columns with in situ formed porous monolithic packing for micro high-performance liquid chromatography and capillary electrochromatography

Capillary columns with monolithic stationary phase were prepared from silanized fused-silica capillaries of 75 microns I.D. by in situ copolymerization of divinylbenzene either with styrene or vinylbenzyl chloride in the presence of a suitable porogen. The porous monolithic support in this study was used either directly or upon functionalization of the surface to obtain a stationary phase that was appropriate for the separation of peptides by capillary electrochromatography (CEC). The main advantages of monolithic columns are as follows. They do not need retaining frits, they do not have charged particles that can get dislodged in high electric field, and they have relatively high permeability and stability. Whereas such columns are designed especially for CEC, they find application in micro high-performance liquid chromatography (mu-HPLC) as well. Five different porogens were employed to prepare the monolithic columns that were examined for permeability and porosity. The flexibility of fused-silica capillaries was not adversely affected by the monolithic packing and the longevity of the columns was satisfactory. This may also be due to the polymerization technique, which resulted in a fluid-impervious outer layer of the monolith that precluded contact between the fused-silica surface and the liquid mobile phase. For the most promising columns, the conductivity ratios and the parameters of the simplified van Deemter equation, both in mu-HPLC and CEC, were evaluated. It was found that the efficiency of the monolithic columns in CEC was significantly higher than in mu-HPLC in the same way as observed with capillary columns having conventional particulate packing. This is attributed to the relaxation of band-broadening with electroosmotic flow (EOF) with respect to that with viscous flow. It follows then that the requirement of high packing uniformity to obtain high efficiency may also be relaxed in CEC. Angiotensin-type peptides were separated by CEC with columns packed with a monolithic stationary phase having fixed n-octyl chains and quaternary ammonium groups at the surface. Plate heights of about 8 microns were routinely obtained. The mechanism of the separation is based on the interplay between EOF, chromatographic retention and electrophoretic migration of the positively charged peptides. The results of the complex migration process, with highly nonlinear dependence of the migration times on the organic modifier and the salt concentration, cannot be interpreted within the framework of classical chromatography or electrophoresis.

Electrokinetically-driven cation-exchange chromatography of proteins and its comparison with pressure-driven high-performance liquid chromatography

This paper examines protein ion-exchange behavior in electrokinetically-driven open-tubular chromatography with columns produced by immobilization of poly(aspartic acid) on capillary walls. Retention and selectivity are similar in the electrokinetic elution mode to that observed in HPLC. The separation mechanism was found to depend on the relationship of mobile phase pH to that of protein pI and ionic strength. Column efficiency in the electrokinetic elution mode was found to be 10-100-times higher than in HPLC. The best separations were achieved at intermediate ionic strength and high pH. The great advantage of these low-phase-ratio, high-efficiency open tubular columns is that isocratic separations in the electrokinetic elution mode were equivalent to gradient elution in the HPLC mode. Low phase ratio has the net effect of collapsing the chromatogram into a narrow elution window while the very high efficiency produces the requisite resolution.

Sensitive, universal detection for capillary electrochromatography using condensation nucleation light scattering detection

Condensation nucleation light scattering detection (CNLSD) was coupled with a pressurized capillary electrochromatography (pCEC) system using an electrospray interface. Supplementary pressure from a high-pressure pump was used to stabilize the electrospray and electrochromatography processes. Hydrodynamic injections were made with a 20 nl injection valve, and the inherent dead volume from the valve was successfully minimized, such that plate numbers in the range of 120,000 to 350,000/m were observed. Selectivity tuning using both pressure and voltage with the pressurized capillary electrochromatography system was demonstrated. Good reproducibility, comparable sensitivities for a wide range of compounds, including carbohydrates, and limits of detection down to the 50 ng/ml level, corresponding to 1-2 pg levels, were determined without the need for derivatization, demonstrating that condensation nucleation light scattering detection is a sensitive, universal detection method for pressurized capillary electrochromatography.

Development of a three-dimensional topographic map display for capillary electrophoresis/mass spectrometry with an ion trap/reflectron time-of-flight mass spectrometer detector: applications to tryptic digests of isoforms of myelin basic protein

A three-dimensional (3-D) contour map format has been developed to display the large amount of data continuously collected throughout an on-line capillary separation using an ion trap storage/reflectron time-of-flight detector (IT/reTOF). The resulting data are displayed on a single computer screen with a mass-to-charge ratio value-elution time-intensity representation. The intensity of various components is represented by 16 different colors so that the mass-to-charge ratio value, the elution time, and the intensity can be conveniently determined for each component. In addition, the mass spectrum and total ion chromatogram or total ion electropherogram (TIE) are shown on the same screen as the 3-D map that enables the correlation of a single spot in the 3-D map to the peaks in the TIE and the corresponding mass spectrum. The 3-D map has been used to identify various posttranslational modification sites of bovine myelin basic protein charge isomers, where the datafiles of tryptic digests of proteins analyzed by capillary electrophoresis/mass spectrometry were processed by this software and a comparison could be performed among the isoforms. The feature of in-screen integration over both the separation domain and the mass domain makes the acquisition of the selected ion chromatogram very convenient and greatly improves the ability to detect modified components present in low amounts.

Advances in capillary electrophoresis

This review summarizes the advancement in operational modes and selected applications of the title technique over the past five years. Regarding operational modes particular emphasis is put upon increasing selectivity and resolution, hyphenation of capillary electrophoresis with techniques based on other than electromigration principles, the so-called chip technology and new ways of detection. In applications selected examples of chiral separation and separation of biopolymers (proteins, nucleic acids) are emphasized. It is demonstrated that capillary electrophoresis represents a complementary technique to high-performance column chromatography and in a number of cases it offers better separations than standard chromatographic procedures.

Rapid protein identification using a microscale electrospray LC/MS system on an ion trap mass spectrometer

A methodology has been developed for the rapid identification of gel separated proteins. Following in gel protein digestion with trypsin, the resulting peptide mixture is analyzed by on-line liquid chromatography, electrospray mass spectrometry (LC/MS). The mass spectral data containing either accurate mass values or sequence specific fragment ion information is then matched to a database of known protein sequences. Key features of the LC/MS system are the use of a novel integrated, microscale LC column-electrospray interface and variable flow solvent delivery to optimize the efficiency of sample loading and gradient elution. With these enhancements, only 10 min is required to analyze each sample. The method is routine for sample amounts ranging from 50 to 500 fmol. The analysis parameters for the ion trap mass spectrometer have to be carefully adjusted in order to keep pace with the rapidly eluting LC peaks. Although designed for rapid LC separations, the integrated column-electrospray interface is also able to provide extended analyses of selected components using a technique known as "peak parking".

On-line analysis by capillary separations interfaced to an ion trap storage/reflectron time-of-flight mass spectrometer

The interface of high-resolution capillary separation methods to time-of-flight mass spectrometry (TOF-MS) has generated considerable interest since TOF can provide the rapid and sensitive detection required by high resolution separations. In recent years, our laboratory has developed a variety of high-resolution capillary separation methods interfaced to TOF-MS via an ion trap storage/reflectron time-of-flight (IT/reTOF) instrument. Using this hybrid configuration, detection of fast separations at very low detection levels has been successfully performed for on-line separations of peptides and protein digests using electrospray ionization. In this report, we review the current status in our laboratory of interfacing high-performance liquid chromatography, capillary electrophoresis, and capillary electrochromatography to an IT/reTOF-MS instrument and various applications that have been developed involving this technology.