Capillary Electrophoresis with Electrochemical Detection for Chiral Separation of Optical Isomers

Study to Probe Subsistence of Host-Guest Inclusion Complexes of α and β-Cyclodextrins with Biologically Potent Drugs for Safety Regulatory Dischargement

Host-guest interaction of two significant drugs, phenylephrine hydrochloride and synephrine with α and β-cyclodextrins were studied systematically. Initially two simple but reliable physicochemical techniques namely conductance and surface tension were employed to find out saturation concentration for the inclusion and its stoichiometry. The obtained 1:1 stoichiometry was further confirmed by two spectrometric methods, UV-Vis study and spectrofluorimetry. Significant shifts in IR stretching frequency also support the inclusion process. Relative stabilities of the inclusion complexes were established by the association constants obtained from UV-Vis spectroscopic measurements, program based mathematical calculation of conductivity data. Calculations of the thermodynamic parameters dictates thermodynamic feasibility of the inclusion process. Spectrofluorometric measurement scaffolds the UV-Vis spectroscopic measurement validating stability of the ICs once again. Mass spectroscopic measurement gives the molecular ion peaks corresponding to the inclusion complex of 1:1 molar ratio of host and guest molecules. The mechanism of inclusion was drawn by ¹H-NMR and 2D ROESY spectroscopic analysis. Surface texture of the inclusion complexes was studied by SEM. Finally, the cytotoxic activities of the inclusion complexes were analyzed and found, Cell viability also balances for non-toxic behavior of the ICs. Moreover, all the studies reveal the formation of inclusion complexes of two ephedra free, alternatively emerging drugs (after their banned product having ephedra) SNP, PEH with α and β-CD which enriches the drug delivery system with their regulatory release without any chemical modification.

Simultaneous determination of phenylethanoid glycosides and aglycones by capillary zone electrophoresis with running buffer modifier

Although the separation efficiency of capillary electrophoresis (CE) is much higher than that of other chromatographic methods, it is sometimes difficult to adequately separate the complex ingredients in biological samples. This article describes how one effective and simple way to develop the separation efficiency in CE is to add some modifiers to the running buffer. The suitable running buffer modifier β-cyclodextrin (β-CD) was explored to fast and completely separate four phenylethanoid glycosides and aglycones (homovanillyl alcohol, hydroxytyrosol, 3,4-dimethoxycinnamic acid, and caffeic acid) in Lamiophlomis rotata (Lr) and Cistanche by capillary zone electrophoresis with ultraviolet (UV) detection. It was found that when β-CD was used as running buffer modifier, a baseline separation of the four analytes could be accomplished in less than 20 min and the detection limits were as low as 10(-3) mg L(-1). Other factors affecting the CE separation, such as working potential, pH value and ionic strength of running buffer, separation voltage, and sample injection time, were investigated extensively. Under the optimal conditions, a successful practical application on the determination of Lr and Cistanche samples confirmed the validity and practicability of this method.

Determination of the hydrolysis rate constants and activation energy of aesculin with capillary electrophoresis end-column amperometric detection

Aesculetin is the product of the hydrolysis reaction of aesculin. A high sensitivity and good repeatability method based on capillary electrophoresis with amperometric detection (CE-AD) was developed for simultaneous determination of aesculin and aesculetin in the hydrolysate of aesculin. Under the optimum condition: 10mmol/L KH(2)PO(4)-5mmol/L Na(2)B(4)O(7) (pH 6.0) buffer, separation at 18kV and +900mV (versus Ag/AgCl) as the detection potential, the hydrolysis rate constants of aesculin hydrolysis at 25, 30, 35, 40 and 45 degrees C in 0.1mol/L KOH were obtained as 1.45x10(-2)min(-1), 2.01x10(-2)min(-1), 2.93x10(-2)min(-1), 3.76x10(-2)min(-1) and 5.05x10(-2)min(-1), respectively. It was calculated that the activation energy for aesculin hydrolysis was 49.4kJ/mol.

Simultaneous determination of allantoin, choline and L-arginine in Rhizoma Dioscoreae by capillary electrophoresis

A rapid, easy and reproducible capillary electrophoresis (CE) method for the simultaneous determination of allantoin, choline and arginine in Rhizoma Dioscoreae was developed first time. Under the optimum condition, the three analytes could be well separated within 5 min in a 70 cm (60 cm effective length) x 75 microm i.d. capillary. The relative standard deviations for both migration time and peak height were less than 3.20%. The linear response range was 5.0-150, 0.9-100 and 1.0-200 microg/ml for arginine, choline and allantoin, respectively. The detection limit of three components was 2.0, 0.4 and 0.5 microg/ml for arginine, choline and allantoin, respectively. Contents of arginine, choline and allantoin in the crude drug of Rhizoma Dioscoreae could be easily determined by the proposed method with satisfactory results.

Rapid chiral on-chip separation with simplified amperometric detection

The enantiomers of adrenaline, noradrenaline, ephedrine and pseudoephedrine were separated by capillary electrophoresis on a micromachined device. Detection was carried out with a new two-electrode amperometric detector, eliminating the need for individual counter and reference electrodes. Separation of the isomers was achieved by employing carboxymethyl-beta-cyclodextrin as chiral selector in the buffer, partly with the additional inclusion of the crown ether 18-crown-6. Plate numbers of up to 20,000, chiral resolutions of 2.5 and detection limits of the order of 10(-7) M were achieved. All separations were completed in less then 3 min.

Modeling and optimization of the chiral selectivity of basic analytes in chiral capillary electrophoresis with negatively charged cyclodextrins using electrochemical detection

A mathematical model concerning the separation selectivity of basic analytes in chiral capillary electrophoresis (CE) modified with negatively charged cyclodextrins (CDs) has been presented to describe the dependence of chiral selectivity on the buffer pH and the chiral selector concentration. The electrophoretic method to determine the parameters of the model has also been developed. The model has been tested with racemic epinephrine and isoproterenol as target analytes and sulfonated beta-CD as chiral selector. The agreements have been found between the calculated and the measured values. Some significant conclusions to optimize chiral CE separation have been derived from the model and proven by the experiments. Electrochemical detection was used to meet the requirement of the low introduced concentration of analytes.

Determination of enantiomeric excess by capillary electrophoresis

Capillary electrophoresis (CE) is becoming an established method for the determination of chiral trace impurities. This paper provides an overview of the state of the art of CE for such determinations. Detection limits of 0.1% impurity is widely accepted as a minimum requirement for chiral trace impurity determinations. This can be relatively easily achieved with CE. However, determination of lower concentrations requires careful optimization of the separation system. Four factors that are of particular significance for trace enantiomeric determinations: resolution, limit of detection, linear range and type of detection, are discussed. Further, the advantages and disadvantages of derivatization in this context are treated as well as the separation approach, ie., direct chiral separation or separation after the formation of diastereomers. It is concluded that the limit of impurity detection can be about 0.05% when UV detection is employed. Using laser-induced fluorescence detection, a quantitative determination at the 0.005% level is often possible.

Enantioselective determination by capillary electrophoresis with cyclodextrins as chiral selectors

This review surveys the separation of enantiomers by capillary electrophoresis using cyclodextrins as chiral selector. Cyclodextrins or their derivatives have been widely employed for the direct chiral resolution of a wide number of enantiomers, mainly of pharmaceutical interest, selected examples are reported in the tables. For method optimisation, several parameters influencing the enantioresolution, e.g., cyclodextrin type and concentration, buffer pH and composition, presence of organic solvents or complexing additives in the buffer were considered and discussed. Finally, selected applications to real samples such as pharmaceutical formulations, biological and medical samples are also discussed.

Enantiomer separation of drugs by capillary electromigration techniques

The review summarizes the most recent developments in the field of enantioseparation of chiral drugs using capillary electromigration techniques. The basic principles of enantioseparations in CE are discussed. Recent developments in sample introduction, separation and detection in capillary electrophoresis and capillary electrochromatography are summarized. The applications are arbitrarily divided into the following three groups: (a) racemates and artificial mixtures of enantiomers, (b) drug forms and (c) chiral drugs and their metabolites in biological fluids. Among the various techniques involved the relatively new developments such as CEC in aqueous and nonaqueous buffers, on-line CE-MS coupling, etc. are emphasized.

Applications of capillary electrophoresis with electrochemical detection in pharmaceutical and biomedical analyses

As a high efficiency separation technique, capillary electrophoresis has been widely used in various fields of analytical science. This review discusses the applications of electrochemical detection systems combined with capillary electrophoresis in pharmaceutical and biomedical analysis. These detection methods mainly involve amperometric detection but also include conductivity detection and potentiometric detection. Its applications in the field are divided into six parts, including catechol compounds, thiols, amino acids and peptides, carbohydrates, general pharmaceuticals, and other related compounds. A relatively detailed discussion is described for each compound under the current studied. On this basis, we have suggested several conceivable directions for capillary electrophoresis with electrochemical detection in the future.