Colloidal gold filtrates as metal substrates for surface-enhanced infrared absorption spectroscopy

Application of Alanine Scanning to Determination of Amino Acids Essential for Peptide Adsorption at the Solid/Solution Interface and Binding to the Receptor: Surface-Enhanced Raman/Infrared Spectroscopy versus Bioactivity Assays

The article describes the application of the alanine-scanning technique used in combination with Raman, surface-enhanced Raman, attenuated total reflection Fourier transform infrared, and surface-enhanced infrared absorption (SEIRA) spectroscopies, which allowed defining the role of individual amino acid residues in the C-terminal 6-14 fragment of the bombesin chain (BN6-14) on the path of its adsorption on the surface of Ag (AgNPs) and Au nanoparticles (AuNPs). A reliable analysis of the SEIRA spectra of these peptides was possible, thanks to a curve fitting of these spectra. By combining alanine-scanning with biological activity studies using cell lines overexpressing bombesin receptors and the intracellular inositol monophosphate assay, it was possible to determine which peptide side chains play a significant role in binding a peptide to membrane-bound G protein-coupled receptors (GPCRs). Based on the analysis of spectral profiles and bioactivity results, conclusions for the specific peptide-metal and peptide-GPCR interactions were drawn and compared.

Is the Use of Surface-Enhanced Infrared Spectroscopy Justified in the Selection of Peptide Fragments That Play a Role in Substrate-Receptor Interactions? Adsorption of Amino Acids and Neurotransmitters on Colloidal Ag and Au Nanoparticles

This paper describes an application of attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and surface-enhanced infrared spectroscopy (SEIRA) to characterize the selective adsorption of four peptides present in body fluids such as neuromedin B (NMB), bombesin (BN), neurotensin (NT), and bradykinin (BK), which are known as markers for various human carcinomas. To perform a reliable analysis of the SERIA spectra of these peptides, curve fitting of these spectra in the spectral region above 1500 cm^–1 and SEIRA measurements of sulfur-containing and aromatic amino acids were performed. On the basis of the analyses of the spectral profiles, specific conclusions were drawn regarding specific molecule–metal interactions and changes in the interaction during the substrate change from the surface of silver nanoparticles (AgNPs) to gold nanoparticles (AuNPs).

Chemical Routes to Surface Enhanced Infrared Absorption (SEIRA) Substrates

Bottom-up strategies for fabricating SEIRA substrates are presented. For this purpose, wet-chemically prepared gold nanoparticles are coated with a polystyrene shell and subsequently self-assembled into different nanostructures such as quasi-hexagonally ordered gold nanoparticle monolayers, double layers, and honeycomb structures. Furthermore elongated gold nanostructures are obtained by sintering of gold nanoparticle double layers. The optical properties of these different gold nanostructures are directly connected to their morphology and geometrical arrangement – leading to surface plasmon resonances from the visible to the infrared wavelength range. Finally, SEIRA enhancement factors are determined. Gold nanoparticle double layers show the best performance as SEIRA substrates.

Probing the Sulfur-Modified Capping Layer of Gold Nanoparticles Using Surface Enhanced Raman Spectroscopy (SERS) Effects

Gold nanoparticles (AuNP) exhibit particular plasmonic properties when stimulated by visible light, which makes them a promising tool to many applications in sensor technology and biomedical applications, especially when associated to sulfur-based compounds. Sulfur species form a great variety of self-assembled structures that cap AuNP and this interaction rules the optical and plasmonic properties of the system. Here, we report the behavior of citrate-stabilized gold nanospheres in two distinct sulfur colloidal solutions, namely, thiocyanate and sulfide ionic solutions. Citrate-capped gold nanospheres were characterized using ultraviolet-visible (UV-Vis) absorption, transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), and atomic force microscopy (AFM). In the presence of sulfur species, we have observed the formation of NP clusters and chain-like structures, giving rise to surface-enhanced effects. Surface-enhanced Raman spectroscopy (SERS) pointed to a modification in citrate vibrational modes, which suggests substitution of citrate by either thiocyanate or sulfide ions with distinct dynamics, as showed by in situ fluorescence. Moreover, we report the emergence of surface-enhanced infrared absorption (SEIRA) effect, which corroborates SERS conclusions. Further, SEIRA shows a great potential as a tool for specification of sulfur compounds in colloidal solutions, which is particularly useful when dealing with sensor technology.

Surface enhanced infrared absorption spectroscopy based on gold nanostars and spherical nanoparticles

Plasmonic anisotropic nanoparticles possess a number of hot spots on their surface due to the presence of sharp edges, tips or vertices, leading to a high electric field strength surrounding the nanostructures. In this paper, we explore different plasmonic nanostructures, including anisotropic gold nanostars (AuNSts) and spherical gold nanoparticles, in surface-enhanced infrared absorption spectroscopy (SEIRAS) in an attenuated total reflection (ATR) configuration. In our experiments, we observed up to 10-times enhancement of the infrared (IR) absorption of thioglycolic acid (TGA) and up to 2-times enhancement of signals for bovine serum albumin (BSA) protein on plasmonic nanostructure-based films deposited on a silicon (Si) internal reflection element (IRE) compared to bare Si IRE. The dependence of the observed enhancement on the amount of AuNSts present at the surface of the IRE has been demonstrated. Quantitative studies with both, TGA and BSA were performed, observing that the SEIRA signal can be correlated to the concentration of analyte molecules present within the evanescent field. The calibration curves in the presence of the AuNSts showed enhanced sensitivity as compared with the bare Si IRE. We finally compare efficiencies of anisotropic AuNSts and spherical citrate-capped and "bare" laser-synthesized gold nanoparticles as SEIRAS substrates for the detection of TGA and BSA. The signal obtained from AuNSts was at least 2 times higher for TGA molecules in comparison with spherical gold nanoparticles, which was explained by a more efficient generation of hot spots on anisotropic surface due to the presence of sharp edges, tips or vertices, leading to a high electric field strength surrounding the AuNSts.

Advanced molecular diagnostic techniques for detection of food-borne pathogens: Current applications and future challenges

The elimination of disease-causing microbes from the food supply is a primary goal and this review deals with the overall techniques available for detection of food-borne pathogens. Now-a-days conventional methods are replaced by advanced methods like Biosensors, Nucleic Acid-based Tests (NAT), and different PCR-based techniques used in molecular biology to identify specific pathogens. Bacillus cereus, Staphylococcus aureus, Proteus vulgaris, Escherichia coli, Campylobacter, Listeria monocytogenes, Salmonella spp., Aspergillus spp., Fusarium spp., Penicillium spp., and pathogens are detected in contaminated food items that cause always diseases in human in any one or the other way. Identification of food-borne pathogens in a short period of time is still a challenge to the scientific field in general and food technology in particular. The low level of food contamination by major pathogens requires specific sensitive detection platforms and the present area of hot research looking forward to new nanomolecular techniques for nanomaterials, make them suitable for the development of assays with high sensitivity, response time, and portability. With the sound of these, we attempt to highlight a comprehensive overview about food-borne pathogen detection by rapid, sensitive, accurate, and cost affordable in situ analytical methods from conventional methods to recent molecular approaches for advanced food and microbiology research.

Surface-enhanced infrared absorption studies towards a new optical biosensor

Reflectometric interference spectroscopy (RIfS), which is well-established in the visual regime, measures the optical thickness change of a sensitive layer caused, e.g., by binding an analyte. When operated in the mid-infrared range the sensor provides additional information via weak absorption spectra (fingerprints). The originally poor spectra are magnified by surface-enhanced infrared absorption (SEIRA). This is demonstrated using the broad complex fluid water band at 3300 cm-1, which is caused by superposition of symmetric, antisymmetric stretching vibration, and the first overtone of the bending vibration under the influence of H-bonds and Fermi resonance effect. The results are compared with a similar experiment performed with an ATR (attenuated total reflectance) set-up.

Recent progress on colloidal metal nanoparticles as signal enhancers in nanosensing

Colloidal metal nanoparticles present very special optical and electromagnetic properties at the nanoscale range. Such plasmonic properties have derived in a huge research field that encompasses the understanding of nanoparticle formation mechanisms for the ultimate goal of developing novel materials for real-life applications. Plasmonic sensing is experiencing a rapid transition by taking advantage of the characteristic properties of colloidal metal nanoparticles. However, a rational design of novel nanoplasmonic substrates, which gathers as much as the required properties for a substrate to be a 'good' sensor is critical through the development of applications that can be effectively transferred as applied technologies. Also, the chosen sensing technique is a key factor when planning the design of a new plasmonic-based sensor. Several factors such as composition, shape, size, particle interactions or stability among others will define the final quality of the nanomaterial as sensing platform. Herein, we review the latest and most promising state-of-the art of nanoplasmonic-based sensors in four differentiated areas regarding the surface-enhanced spectroscopy detection technique being LSPR-, SERS- and SEIRA-, and SEF based platforms.

Gold nanoparticles from indole-3-carbinol exhibit cytotoxic, genotoxic and antineoplastic effects through the induction of apoptosis

The synthesized gold nanoparticles using indole-3-carbinol (AuNPI3Cs) has been characterized and its antineoplastic activities has been studied here.

SEIRA studies of uracil adsorbed on wet-chemically prepared gold nanoparticles film on glass substrate - effect of morphology of film

Surface-enhanced infrared absorption (SEIRA) studies of uracil adsorbed on wet-chemically prepared gold nanoparticles (AuNp) immobilized on silanised glass substrate were carried out using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. The deposition time dependent evolution of morphological changes in AuNp films and its influence on the SEIRA spectra of uracil were investigated. The morphological changes were examined by atomic force microscopy (AFM). The spectrum of uracil adsorbed on AuNp film obtained with 1/2 an hour deposition time showed a clear enhancement than 2 and 4h deposition times. The small shift seen in SEIRA spectra indicates weak interaction of the molecules with AuNp film.

Investigation on the adsorption characteristics of sodium benzoate and taurine on gold nanoparticle film by ATR-FTIR spectroscopy

Fourier transform infrared (FTIR) spectroscopic studies of sodium benzoate and taurine adsorbed on gold nanoparticle (AuNp) film on silanised glass slides have been studied by attenuated total reflection technique (ATR). The surface morphology of the AuNp films has been measured by Atomic Force Microscopy. The ATR spectra of sodium benzoate and taurine deposited on AuNp film are compared with ATR spectra of their powdered bulk samples. A new red-shifted band appeared along with the symmetric and asymmetric stretches of carboxylate group of sodium benzoate leading to a broadening of the above peaks. Similar behavior is also seen in the case of symmetric and asymmetric stretches of sulphonate group of taurine. The results indicate presence of both chemisorbed and physisorbed layers of both sodium benzoate and taurine on the AuNp film with bottom layer chemically bound to AuNp through carboxylate and sulphonate groups respectively.

A "gold cluster-linked immunosorbent assay": optical near-field biosensor chip for the detection of allergenic beta-lactoglobulin in processed milk matrices

A new optical biosensor based on the resonance enhanced absorption (REA) effect is described. REA effects are observed when noble metal nanoclusters are deposited at a nanometric distance from a highly reflective mirror. The aim of our study was to adopt the REA effect for the rapid testing of proteins in a direct immunoassay format on chip and to adjust a conventional enzyme-linked immunosorbent assay (ELISA) to a cluster-linked immunosorbent assay (CLISA) by labelling the read-out antibody with monodisperse colloidal gold clusters. For generation of a strong REA signal 30 min of coating of the target protein was sufficient. To evaluate our approach we used the milk allergen beta-lactoglobulin (beta-LG) as analyte, and beta-LG-isolations of processed milk products to prove the applicability of our method to the analysis of proteins in complex matrices at even the trace level. For validating the specificity of the CLISA biosensor we used the non-functionalised cluster reagent without antibody and a non-immunoreactive milk matrix as controls. As expected, very weak background signals were obtained with the controls, whereas the purified food samples clearly showed that beta-LG was present and detectable. In conclusion, we were able to describe the successful development of a new biosensor chip for assaying proteins using the REA effect.

In situ surface-enhanced infrared absorption spectroscopy for the analysis of the adsorption and desorption process of Au nanoparticles on the SiO2/Si surface

The adsorption and desorption of Au nanoparticles (AuNP) in colloidal D2O suspension on the (3-aminopropyl)triethoxysilane treated SiO2/Si surface was investigated by in situ attenuated total reflection surface enhanced infrared absorption (ATR-SEIRA) spectroscopy with a liquid flow cell. With increasing surface density of AuNP, the absorption of the vibrational modes of D2O and of the citrate molecules covering the AuNP increases due to SEIRA. Repulsive electrostatic Coulomb forces between the AuNP lead to the saturation of the AuNP surface density at submonolayer coverage. We show that the adsorption kinetics can be investigated by monitoring in situ the molecular vibrational modes of D2O and the citrate molecules. Furthermore, we clarify that the adsorption process can be described very well by a diffusion-limited first-order Langmuir kinetics model. When exposing a saturated AuNP submonolayer to 2-aminoethanethiol (AET)/D2O solution, the AuNP are removed from the surface and the IR absorption of the D2O vibrational modes become weaker again. Taking into account the time dependencies of the OD and the CH peaks, we propose a microscopic model where the AET molecules quickly adsorb on the AuNP by replacing most of the precovering citrate molecules exposed to the AET solution. As this takes place, the AuNP agglomerate-as we could detect with scanning electron microscopy-and are finally removed from the surface.

Preparation and characterization by surface-enhanced infrared absorption spectroscopy of silver nanoparticles formed on germanium substrates by electroless displacement

In this paper, the feasibility of applying electroless displacement to prepare silver nanoparticles (AgNPs) on the surface of germanium (Ge) substrate is demonstrated, and the performances of surfaces prepared in this manner for surface-enhanced infrared absorption (SEIRA) spectroscopy are reported. The process used to produce suitable AgNPs for SEIRA by electroless deposition is simple and effective, requiring only pretreatment of the germanium surface with hot air, immersion of the substrate in a dilute solution of silver nitrate, and washing of the resulting plate. To quantify the behavior of AgNPs on a Ge substrate and to optimize the conditions for the preparation of AgNPs on Ge substrates, a monolayer of p-nitrothiophenol (PNTP) was bonded to the surface of the AgNPs by immersion of the plate in a dilute solution of PNTP and measurement of the transmission spectrum. The factors that influenced the formation of AgNPs, and hence the SEIRA signals, included the concentration of AgNO3, the reaction time and the temperature. Results indicated that stronger absorption bands in the SEIRA spectrum of a monolayer of PNTP were obtained if the reaction rate for the displacement of silver ions by Ge was slow. This condition was achieved by keeping the concentration of AgNO3 and the reaction temperature low. Under the optimal conditions found in this work, an enhancement factor of approximately 100 was achieved for commonly used probe molecules in SEIRA measurements.

Biochemical applications of surface-enhanced infrared absorption spectroscopy

An overview is presented on the application of surface-enhanced infrared absorption (SEIRA) spectroscopy to biochemical problems. Use of SEIRA results in high surface sensitivity by enhancing the signal of the adsorbed molecule by approximately two orders of magnitude and has the potential to enable new studies, from fundamental aspects to applied sciences. This report surveys studies of DNA and nucleic acid adsorption to gold surfaces, development of immunoassays, electron transfer between metal electrodes and proteins, and protein–protein interactions. Because signal enhancement in SEIRA uses surface properties of the nano-structured metal, the biomaterial must be tethered to the metal without hampering its functionality. Because many biochemical reactions proceed vectorially, their functionality depends on proper orientation of the biomaterial. Thus, surface-modification techniques are addressed that enable control of the proper orientation of proteins on the metal surface.

Figure

Tunable Surface-Enhanced Infrared Absorption on Au Nanofilms on Si Fabricated by Self-Assembly and Growth of Colloidal Particles

Au colloids were used to fabricate nanoscale-tunable Au nanofilms on silicon for surface-enhanced IR absorption bases in both ambient and electrochemical environments. This wet process incorporates the self-assembly of colloidal Au monolayer using 3-aminopropyl trimethoxysilane as the organic coupler with subsequent chemical plating in an Au(III)/hydroxylamine solution. FTIR spectroscopy in transmission mode of the probe species SCN- was used to evaluate the apparent surface enhancement in IR absorption of 2D Au colloid arrays and chemically plated Au particles. The nanostructure of Au films was examined by atomic force microscopy. The IR and AFM results show that the apparent surface enhancement factor (1-2 orders of magnitude) increases with increasing sizes and/or contact, and the severe aggregation of Au nanoparticles may cause the bipolar band shape. Cyclic voltammetry on the Au nanofilm obtained by the above nucleation and growth strategy exhibits a feasible electrochemical stability and behavior. In situ ATR-FTIR measurement of p-nitrobenzoic acid adsorption demonstrates that the as-grown Au film yields rather promising surface enhancement as well.

Detection of Salmonella enterica serovar typhimurium by using a rapid, array-based immunosensor

The multianalyte array biosensor (MAAB) is a rapid analysis instrument capable of detecting multiple analytes simultaneously. Rapid (15-min), single-analyte sandwich immunoassays were developed for the detection of Salmonella enterica serovar Typhimurium, with a detection limit of 8 x 10(4) CFU/ml; the limit of detection was improved 10-fold by lengthening the assay protocol to 1 h. S. enterica serovar Typhimurium was also detected in the following spiked foodstuffs, with minimal sample preparation: sausage, cantaloupe, whole liquid egg, alfalfa sprouts, and chicken carcass rinse. Cross-reactivity tests were performed with Escherichia coli and Campylobacter jejuni. To determine whether the MAAB has potential as a screening tool for the diagnosis of asymptomatic Salmonella infection of poultry, chicken excretal samples from a private, noncommercial farm and from university poultry facilities were tested. While the private farm excreta gave rise to signals significantly above the buffer blanks, none of the university samples tested positive for S. enterica serovar Typhimurium without spiking; dose-response curves of spiked excretal samples from university-raised poultry gave limits of detection of 8 x 10(3) CFU/g.

Study of Surface-Enhanced Infrared Spectroscopy

The dependence of surface-enhanced infrared absorption (SEIRA) on structure and vibration modes of chemisorbates was studied in a reflection-absorption mode by employing self-assembled monolayers of 4-pyridinethiol and 4-nitrothiophenol formed on Au island films deposited on glass substrates. The present work shows that both the electromagnetic and chemical effects contribute to the total SEIRA enhancement, with the former playing a predominant role. Moreover, the bands due to different vibration modes give rise to distinctly different magnitudes of enhancement, suggesting the presence of a chemical origin in the enhanced IR absorption. Copyright 2001 Academic Press.