Automated Measurement of Lipid Hydroperoxides in Oil and Fat Samples by Flow Injection Photometry

Light-emitting diodes for analytical chemistry

Light-emitting diodes (LEDs) are playing increasingly important roles in analytical chemistry, from the final analysis stage to photoreactors for analyte conversion to actual fabrication of and incorporation in microdevices for analytical use. The extremely fast turn-on/off rates of LEDs have made possible simple approaches to fluorescence lifetime measurement. Although they are increasingly being used as detectors, their wavelength selectivity as detectors has rarely been exploited. From their first proposed use for absorbance measurement in 1970, LEDs have been used in analytical chemistry in too many ways to make a comprehensive review possible. Hence, we critically review here the more recent literature on their use in optical detection and measurement systems. Cloudy as our crystal ball may be, we express our views on the future applications of LEDs in analytical chemistry: The horizon will certainly become wider as LEDs in the deep UV with sufficient intensity become available.

Flow cell within an LED: a proposal for an optical absorption detector

Droplets formed at the tip of a tube under the same conditions possess extreme uniformity of form, volume and weight. These properties of liquid drop formation have been known for a long time and consequently many applications for the drop have been found in instrumentation and chemical analysis methods. In the present paper, we report on the analytical use of a dynamic LED-based flow-through optical absorption detector with optical path length controlled by continuous dropping of a solution. This arrangement consists of a flow cell built within a high-intensity red LED (lambda(max) = 630 nm). The feasibility of the detector is demonstrated by colorimetric determination of methylene blue, and ammonium by Berthelot's reaction, in a flow-injection system. For ammonium, the reaction forms a blue dye (indophenol) with a maximum absorption at 630-650 nm. The detection limit, considered as 3 times the signal of the blank, is better than 125 microg l(-1). The small flow cell represents a good combination of optical path length, low volume and fast washout. This detector can be used advantageously in automated methods and can represent a solution to problems of optical detection involving gas bubbles and precipitation of particles in turbidimetric applications.

Flow-injection methylene blue-based spectrophotometric method for the determination of peroxide values in edible oils

A flow-injection method for measuring the peroxide value (PV, mequiv. O2 kg(-1)) in edible oils is described. The technique is based on spectrophotometric monitoring at 660 nm of methylene blue (MB), generated from leucomethylene blue (LMB) oxidation with peroxides present in oil samples. After being optimized, the method was validated in terms of linearity, precision sensitivity and recovery. Linear calibration graph was obtained in the range 0.1-5 mequiv. O2 kg(-1), with a detection limit (S/N=3) of 0.014 mequiv. O2 kg(-1). The precision of the method (R.S.D., n=9) for within and between-days is better than 1.5% and 2.2%, respectively at 0.4 mequiv. O2 kg(-1). The method was applied successfully to the determination of PV in six edible oil samples, and compared to the classical official method. Using the linear regression test, Student's t-test and variance ratio F-test, there was no significant difference between the compared methods. The proposed method is accurate, simple, cheap and could be used to control edible oil rancidity with a high sample throughputs (30 samples h(-1)).

Structural analysis of hydroperoxy- and epoxy-triacylglycerols by liquid chromatography mass spectrometry

Oxidation of triacylglycerols (TAGs) containing oleic acid leads to the formation of several products. This study characterizes hydroperoxy- and epoxy-TAGs including their regio-isomers. For this purpose, epoxy- and hydroperoxy-TAGs, formed by oxidation of 1,2-dipalmitoyl-3-oleoyl-glycerol (PPO) and 1,3-dipalmitoyl-2-oleoyl-glycerol (POP) under air and 18O2, were analysed by reverse phase liquid chromatography-electrospray ionisation-mass spectrometry (LC-ESI-MS) using a triple quadrupole mass analyser, in positive ion mode. Post-column infusion of ammonium formiate was used to obtain intense molecular ion adducts. Pure 1,2-dipalmitoyl-3-epoxystearoyl-glycerol (PPEs) and 1,3-dipalmitoyl-2-epoxystearoyl-glycerol (PEsP), synthesized by epoxidation of the corresponding monounsaturated TAGs, were used to confirm MS/MS identification. The use of 18O2 oxidation experiments permitted unambiguous identification of MS/MS fragmentation pathways of both hydroperoxide and epoxy-TAGs. Fragmentation of hydroperoxy-TAGs are very distinct from their epoxy-TAGs homologues and consist of simultaneous losses of hydrogen peroxide (34 a.m.u.) and water (18 a.m.u.).

Study and application of flow injection spectrofluorimetry with a fluorescent probe of 2-(2-pyridil)-benzothiazoline for superoxide anion radicals

This paper presents an automatic spectrofluorimetric method (flow injection spectrofluorimetry) using a novel fluorescent probe named H. Py. Bzt (2-(2-pyridil)-benzothiazoline) for determining superoxide dismutase (SOD) activity. The fluorescent probe was synthesized in house and fully characterized by elemental analysis and by infrared and (1)H nuclear magnetic resonance spectra. It could specially identify and trap O(2)(*-) and was oxidized by O(2)(*-) to form a strong fluorescence product. Based on this reaction, the flow injection spectrofluorimetric method was proposed and successfully used to determine SOD activity. The proposed method has a better selectivity in the determination of reactive oxygen species because the probe can be oxidized only by O(2)(*-) excluding H(2)O(2). As a kind of simple, rapid, precise, sensitive and automatic technique, it was applied to measurement of SOD activity in scallion, garlic, and onion with satisfactory results.