Automated in-tube solid-phase microextraction coupled with liquid chromatography/electrospray ionization mass spectrometry for the determination of beta-blockers and metabolites in urine and serum samples

Zinc oxide-aluminum oxide nanocomposite solid phase microextraction for diazepam and oxazepam trace determination

A new efficient ZnO-Al2O3 nanocomposite (ZANC) was synthesized to form solid-phase microextraction (SPME) fiber. The prepared fiber was used for trace determination of benzodiazepines by gas chromatography-flame ionization detector in urine samples. The effective parameters on the extraction process including extraction time, salt percentage, desorption time and sample pH were optimized by a factorial design method. The method was evaluated at the optimum conditions and limits of detection (LODs) were calculated 20 µg/L for diazepam and oxazepam. The method repeatability for oxazepam and diazepam (50 µg/L, n = 4) was calculated at 8.8 % and 6.4 %. Also, the method reproducibility was obtained, 7.45 % and 6.61 % for oxazepam and diazepam (50 µg/L, n = 4). Also, fiber-to-fiber relative standard deviation (RSDs%) for the target analytes were less than 15.5 %. The method linearity is within the range of 62-500 µg/L for diazepam and oxazepam. The ZANC-SPME fiber showed a good lifetime (60 times) with high chemical stability. The high thermal stability of ZANC-SPME fiber was attained at 280 °C. The extraction results of poly dimethylsiloxan/divinyl benzene (PDMS/DVB) fiber were compared by ZANC-SPME fiber. Therefore, the method is proposed as a suitable technique for benzodiazepines detection in the urine sample.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Bioanalytical HPLC Applications of In-Tube Solid Phase Microextraction: A Two-Decade Overview

In-tube solid phase microextraction is a cutting-edge sample treatment technique offering significant advantages in terms of miniaturization, green character, automation, and preconcentration prior to analysis. During the past years, there has been a considerable increase in the reported publications, as well as in the research groups focusing their activities on this technique. In the present review article, HPLC bioanalytical applications of in-tube SPME are discussed, covering a wide time frame of twenty years of research reports. Instrumental aspects towards the coupling of in-tube SPME and HPLC are also discussed, and detailed information on materials/coatings and applications in biological samples are provided.

Graphene Oxide/Polyethylene Glycol-Stick for Thin Film Microextraction of β-Blockers from Human Oral Fluid by Liquid Chromatography-Tandem Mass Spectrometry

A wooden stick coated with a novel graphene-based nanocomposite (Graphene oxide/polyethylene glycol (GO/PEG)) is introduced and investigated for its efficacy in solid phase microextraction techniques. The GO/PEG-stick was prepared and subsequently applied for the extraction of β-blockers, acebutolol, and metoprolol in human oral fluid samples, which were subsequently detected by liquid chromatography tandem mass spectrometry (LC-MS/MS). Experimental parameters affecting the extraction protocol including sample pH, extraction time, desorption time, appropriate desorption solvent, and salt addition were optimized. Method validation for the detection from oral fluid samples was performed following FDA (Food and Drug Administration) guidelines on bioanalytical method validation. Calibration curves ranging from 5.0 to 2000 nmol L⁻¹ for acebutolol and 25.0 to 2000 nmol L⁻¹ for metoprolol were used. The values for the coefficient of determination (R²) were found to be 0.998 and 0.996 (n = 3) for acebutolol and metoprolol, respectively. The recovery of analytes during extraction was 80.0% for acebutolol and 62.0% for metoprolol, respectively. The limit of detections (LODs) were 1.25, 8.00 nmol L⁻¹ for acebutolol and metoprolol and the lower limit of quantifications (LLOQ) were 5.00 nmol L⁻¹ for acebutolol and 25.0 nmol L⁻¹ for metoprolol. Validation experiments conducted with quality control (QC) samples demonstrated method accuracy between 80.0% to 97.0% for acebutolol and from 95.0% to 109.0% for metoprolol. The inter-day precision for QC samples ranged from 3.6% to 12.9% for acebutolol and 9.5% to 11.3% for metoprolol. Additionally, the GO/PEG-stick was demonstrated to be reusable, with the same stick observed to be viable for more than 10 extractions from oral fluid samples.

An in-tube aptamer/gold nanoparticles coated capillary solid-phase microextraction for separation of adenosine in serum and urine samples

As an endogenous nucleoside, adenosine was significant for the diagnosis and treatment of some diseases, such as schizophrenia. However, due to the complicated matrix interference, it was difficult to monitor trace or ultra-trace adenosine directly in bio-samples. In this contribution, a novel in-tube SPME technique based on aptamer/Au nanoparticles coated open tubular fused-silica capillary was established to separate and enrich adenosine in bio-samples with high affinity. Therefore, a uniform and dense AuNPs layer was coated on the inner surface of the open tubular capillary, and then adenosine aptamer was immobilized on AuNPs with a high capacity of 2.44 μg per 27-cm capillary. As a result, the capillary shown high selectivity to adenosine with a selectivity factor of 14.4 when compared with the scrambled aptamer/AuNPs coated capillary. Also, the extraction amount of adenosine was 2.8-24.8 times higher than those of its structural analogs and contrast, such as guanosine, uridine, cytidine, thymidine, and toluic acid. After the optimization of extraction conditions, the aptamer/AuNPs coated in-tube SPME-HPLC method was developed for the adenosine assay with the linear range of 0.002-0.100 μg mL^-1 and the detection limit of 0.45 ng mL^-1. Subsequently, the approach was applied for trace adenosine monitoring in human serum and urine samples. It showed a strong performance of reducing matrix interference and improving sensitivity, and the spiking recoveries of 89.9-92.6% and 91.1-94.5% were achieved respectively.

Butyl Methacrylate-Co-Ethylene Glycol Dimethacrylate Monolith for Online in-Tube SPME-UHPLC-MS/MS to Determine Chlopromazine, Clozapine, Quetiapine, Olanzapine, and Their Metabolites in Plasma Samples

This manuscript describes a sensitive, selective, and online in-tube solid-phase microextraction coupled with an ultrahigh performance liquid chromatography-tandem mass spectrometry (in-tube SPME-UHPLC-MS/MS) method to determine chlopromazine, clozapine, quetiapine, olanzapine, and their metabolites in plasma samples from schizophrenic patients. Organic poly(butyl methacrylate-co-ethylene glycol dimethacrylate) monolith was synthesized on the internal surface of a fused silica capillary (covalent bonds) for in-tube SPME. Analyte extraction and analysis was conducted by connecting the monolithic capillary to an UHPLC-MS/MS system. The monolith was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectrometry (FTIR). The developed method presented adequate linearity for all the target antipsychotics: R² was higher than 0.9975, lack-of-fit ranged from 0.115 to 0.955, precision had variation coefficients lower than 14.2%, and accuracy had relative standard error values ranging from -13.5% to 14.6%, with the exception of the lower limit of quantification (LLOQ). The LLOQ values in plasma samples were 10 ng mL^-1 for all analytes. The developed method was successfully applied to determine antipsychotics and their metabolites in plasma samples from schizophrenic patients.

Polythiophene/graphene oxide nanostructured electrodeposited coating for on-line electrochemically controlled in-tube solid-phase microextraction

In this work, a novel polythiophene/graphene oxide (PTh/GO) nanostructured coating was introduced for on-line electrochemically-controlled in-tube solid phase microextraction of amitriptyline (AMI) and doxepin (DOX) as antidepressant drugs. The PTh/GO coating was prepared on the inner surface of a stainless steel tube by a facile in-situ electro-deposition method and it was used as a working electrode for electrochemically control in-tube solid phase microextraction. In the PTh/GO coating, GO acts as an anion dopant and sorbent. The PTh/GO coating, compared to PTh and GO coatings, exhibited enhanced long lifetime, good mechanical stability and a large specific surface area. Regarding the in-tube SPME, some important factors such as the extraction and desorption voltage, extraction and desorption times and flow rates of the sample solution and eluent, which could affect the extraction and separation efficiency of the analytes, were optimized. Total analysis time of this method including the online extraction and desorption time was about 21min for each sample. AMI and DOX were extracted, separated and determined with limits of detection as small as 0.3μgL^-1 and 0.5μgL^-1, respectively. This method showed good linearity in the range of 0.7-200μgL^-1, 2.3-200μgL^-1 and 2.9-200μgL^-1 for AMI, and in the range 0.9-200μgL^-1, 2.5-200μgL^-1 and 3.0-200μgL^-1 for DOX in water, urine and plasma samples, respectively; the coefficients of determination were also equal to or higher than 0.9976. The inter- and intra-assay precisions (RSD%, n=3) were in the range of 2.8-3.4% and 2.9-3.9% at the three concentration levels of 5, 25 and 50μgL^-1, respectively. Finally, under the optimal conditions, the method was applied for the analysis of the drugs in human urine and plasma pretreated samples and good results were obtained.

Separation/Preconcentration Techniques for Rare Earth Elements Analysis

The main aim of this chapter exactly characterizes the contribution. The analytical chemistry of the rare earth elements (REEs) very often is highly complicated and the determination of a specific element is impossible without a sample pre-concentration. Sample preparation can be carried out either by separation of the REEs from the matrix or by concentrating the REEs. The separation of REEs from each other is mainly made by chromatography.

At the beginning of REE analysis, the method of precipitation/coprecipitation was applied for the treatment of REE mixtures. The method is not applicable for the separation of trace amounts of REEs. The majority of the methods used are based on the distribution of REEs in a two-phase system, a liquid–liquid or a liquid–solid system. Various techniques have been developed for the liquid–liquid extraction (LLE), in particular the liquid phase micro-extraction. The extraction is always combined with a pre-concentration of the REEs in a single drop of extractant or in a hollow fiber filled with the extractant. Further modified techniques for special applications and for difficult REE separation have been developed. Compared to the LLE, the solid phase micro-extraction is preferred. The method is robust and easy to handle, in which the solid phase loaded with the REEs can be used directly for subsequent determination methods. At present, very new solid materials, like nanotubes, are developed and tested for solid phase extraction.

Determination of propranolol and carvedilol in urine samples using a magnetic polyamide composite and LC–MS/MS

Aim: β-blockers are compounds that bind with adrenoreceptors hindering their interaction with adrenalin and noradrenalin. They are clinically relevant and they are also used in some sport as doping agents. Results: A new method based on the combination of dispersive micro-solid phase extraction and LC–MS/MS has been developed to determine propranolol and carvedilol in urine samples. For this purpose a magnetic-polyamide composite is synthesized and used as sorbent. Working under the optimum conditions, the method provides limits of detection and quantification in the range of 0.1–0.15 μg/l and 0.3–0.5 μg/l, for carvedilol and propranolol, respectively. The precision, expressed as RSD, was better than 9.6% and the relative recoveries varied between 73.7 and 81.3%. Conclusion: The methodology is appropriate for the determination of β-blockers in urine samples at the low microgram per liter range for therapeutic purposes.

Water-compatible graphene oxide/molecularly imprinted polymer coated stir bar sorptive extraction of propranolol from urine samples followed by high performance liquid chromatography-ultraviolet detection

Due to the high selectivity and stability, molecularly imprinted polymers (MIPs) have been successfully applied in stir bar sorptive extraction (SBSE) as a special coating to improve the selective extraction capability for target analytes. However, traditional MIPs usually suffer from incompatibility in aqueous media and low adsorption capacity, which limit the application of MIP coated stir bar in aqueous samples. To solve these problems, a water-compatible graphene oxides (GO)/MIP composite coated stir bar was prepared in this work by in situ polymerization. The prepared water-compatible GO/MIP coated stir bar presented good mechanical strength and chemical stability, and its recognition ability in aqueous samples was improved due to the polymerization of MIP in water environment, the adsorption capacity for target analytes was also increased by the addition of GO in MIP pre-polymer solution. Based on it, a method of water-compatible GO/MIP coated stir bar sorptive extraction combined with high performance liquid chromatography-ultraviolet detector (HPLV-UV) was proposed for the analysis of propranolol (PRO) in aqueous solution. The influencing factors of SBSE, such as sample pH, salt effect, stirring rate, extraction time, desorption solvent and desorption time, were optimized, and the analytical performance of the developed SBSE-HPLC-UV method was evaluated under the optimized conditions. The limit of detection (LOD) of the proposed method for PRO was about 0.37 μg L(-1), and the enrichment factor (EF) was 59.7-fold (theoretical EF was 100-fold). The reproducibility was also investigated at concentrations of 5 μg L(-1) and the relative standard deviation (RSD) was found to be 7.3% (n=7). The proposed method of GO/MIP coating-SBSE-HPLC-UV was successfully applied for the assay of the interested PRO drug in urine samples, and further extended to the investigation of the excretion of the drugs by monitoring the variation of the concentration of PRO in urine within 10h after drug-taking.

Development of SPME-LC-MS method for screening of eight beta-blockers and bronchodilators in plasma and urine samples

The current work describes the development and validation of a simple, efficient, and fast method using solid phase microextraction coupled to liquid chromatography-tandem mass spectrometry (SPME-LC-MS/MS) for the concomitant measurement of eight beta-blockers and bronchodilators in plasma and urine. The presented assay enables quantitative determination of acebutolol, atenolol, fenoterol, nadolol, pindolol, procaterol, sotalol, and timolol. In this work, samples were prepared on a high-throughput platform using the 96-well plate format of the thin film solid phase microextraction (TFME) system, and a biocompatible extraction phase made of hydrophilic-lipophilic balance particles. Analytes were separated on a pentafluorophenyl column (100mm×2.1mm, 3μm) by gradient elution using an UPLC Nexera coupled with an LCMS-8060 mass spectrometer. The mobile phase consisted of water-acetonitrile (0.1% formic acid) at a flow rate of 0.4mLmin(-1). The linearity of the method was checked within therapeutic blood-plasma concentrations, and shown to adequately reflect typically expected concentrations of future study samples. Post-extraction addition experiments showed that the matrix effect ranged in plasma from 98% for procaterol to 115% for nadolol, and in urine, from 85% for nadolol and pindolol to 119% for atenolol. The method was successfully validated using Food and Drug Administration (FDA) guidelines, and met all acceptance criteria for bioanalytical assays at five concentration levels for all selected drugs. The final protocol can be successfully applied for monitoring concentrations of the selected drugs in both plasma and urine matrices obtained from patients or athletes.

A new strategy to eliminate sample mixing during in-tube solid phase microextraction

During in-tube solid phase microextraction, sample mixing with mobile phase contained in the autosampler tubing during extraction may result in some amount of sample becoming entrained in the mobile phase rather than returning to the sample vial or being directed to waste after extraction. In cases where target analytes have relatively low affinity for the sorbent on the wall of the capillary, mixing can impact data quality. Where the sample contains components that may interfere with either the separation (e.g. proteins) or detection (e.g. ions with MS detection), additional difficulties can arise. In the current research, the magnitude of the sample mixing effect was illustrated by analyzing ranitidine and a series of polycyclic aromatic hydrocarbons (PAH). The sample volume equivalent of mixing was calculated as 37 μL for ranitidine and 20 μL for PAHs using the same inner diameter of capillary. To address this issue, a novel approach involving adding a switching valve located between the metering pump and the capillary was developed. Capillary flush conditions, draw/eject speed and extraction time were optimized for ranitidine with the result that in the final method, no mixing of sample with mobile phase was apparent in the detected amounts. To provide information on a compound class with intermediate polarity, two -blockers were also extracted using the optimized washing conditions respectively. The results indicated that the issue of sample mixing had been resolved for these as well. Finally, in-tube SPME calibration of these three analyte classes was shown to be highly linear, providing further indication that sample mixing was not impacting data quality. Available literature on the subject was surveyed, and a discussion on the rational selection of conditions to guide method development was also provided.

Microextraction by Packed Sorbent (MEPS) and Solid-Phase Microextraction (SPME) as Sample Preparation Procedures for the Metabolomic Profiling of Urine

For a long time, sample preparation was unrecognized as a critical issue in the analytical methodology, thus limiting the performance that could be achieved. However, the improvement of microextraction techniques, particularly microextraction by packed sorbent (MEPS) and solid-phase microextraction (SPME), completely modified this scenario by introducing unprecedented control over this process. Urine is a biological fluid that is very interesting for metabolomics studies, allowing human health and disease characterization in a minimally invasive form. In this manuscript, we will critically review the most relevant and promising works in this field, highlighting how the metabolomic profiling of urine can be an extremely valuable tool for the early diagnosis of highly prevalent diseases, such as cardiovascular, oncologic and neurodegenerative ones.

Clinical applications of fast liquid chromatography: a review on the analysis of cardiovascular drugs and their metabolites

One of the major challenges facing the medicine today is developing new therapies that enhance human health. To help address these challenges the utilization of analytical technologies and high-throughput automated platforms has been employed; in order to perform more experiments in a shorter time frame with increased data quality. In the last decade various analytical strategies have been established to enhance separation speed and efficiency in liquid chromatography applications. Liquid chromatography is an increasingly important tool for monitoring drugs and their metabolites. Furthermore, liquid chromatography has played an important role in pharmacokinetics and metabolism studies at these drug development stages since its introduction. This paper provides an overview of current trends in fast chromatography for the analysis of cardiovascular drugs and their metabolites in clinical applications. Current trends in fast liquid chromatographic separations involve monolith technologies, fused-core columns, high-temperature liquid chromatography (HTLC) and ultra-high performance liquid chromatography (UHPLC). The high specificity in combination with high sensitivity makes it an attractive complementary method to traditional methodology used for routine applications. The practical aspects of, recent developments in and the present status of fast chromatography for the analysis of biological fluids for therapeutic drug and metabolite monitoring, pharmacokinetic studies and bioequivalence studies are presented.

A highly sensitive LC-MS/MS method capable of simultaneously quantitating celiprolol and atenolol in human plasma for a cassette cold-microdosing study

A highly sensitive simultaneous quantitative method for a cassette cold-microdosing study on celiprolol and atenolol was developed with liquid chromatography-tandem mass spectrometry. The method utilizes a combination of solid-phase extraction (SPE) with strong cation exchange (SCX) cartridge columns and reversed-phase chromatography with an ODS analytical column. SCX-SPE cartridge columns (100 mg sorbent) were used for a selective extraction of celiprolol, atenolol and metoprolol (internal standard) from 500 μL of human plasma samples. Turbo-ion spray at positive mode was employed for the ionization of the drug compounds. Quantitation was performed on a triple quadrupole mass spectrometer by selected reaction monitoring with the transitions of m/z 380 to m/z 251 for celiprolol and m/z 267 to m/z 145 for atenolol. Separation of analytes was achieved on an ODS column (100 mm length × 2.1 mm id, 3 μm) by a gradient elution with 10 mM formic acid and methanol by varying their proportion at a flow rate of 0.2 mL/min. The method was validated in the range of 1-250 pg/mL for celiprolol and 2.5-250 pg/mL for atenolol and was successfully applied to the elucidation of pharmacokinetic profiling in a cold cassette microdosing study of the β-blockers.

Simultaneous extraction of acidic and basic drugs at neutral sample pH: a novel electro-mediated microextraction approach

The simultaneous extraction of acidic and basic analytes from a particular sample is a challenging task. In this work, electromembrane extraction (EME) of acidic non-steroidal anti-inflammatory drugs and basic β-blockers in a single step was carried out for the first time. It was shown that by designing an appropriate compartmentalized membrane envelope, the two classes of drugs could be electrokinetically extracted by a 300 V direct current electrical potential. This method required only a very short 10-min extraction time from a pH-neutral sample, with a small amount (50 μL) of organic solvent (1-octanol) as the acceptor phase. Analysis was carried out using gas chromatography-mass spectrometry after derivatization of the analytes. Extraction parameters such as extraction time, applied voltage, pH range, and concentration of salt added were optimized. The proposed EME technique provided good linearity with correlation coefficients from 0.982 to 0.997 over a concentration range of 1-200 μg L⁻¹. Detection limits of the drugs ranged between 0.0081 and 0.26 μg L⁻¹, while reproducibility ranged from 6 to 13% (n=6). Finally, the application of the new method to wastewater samples was demonstrated.

Continuous solid-phase extraction and gas chromatography-mass spectrometry determination of pharmaceuticals and hormones in water samples

A semi-automatic flow-based method for the simultaneous determination of 9 pharmaceuticals and 3 hormones in water samples in a single analytical run is proposed. The analytes were retained on a solid-phase extraction sorbent column and 1 microL of the eluate analysed by gas chromatography in combination with electron impact ionization mass spectrometry in the SIM mode. The sorbent used, Oasis-HLB, provided near-quantitative recovery of all analytes. The proposed method was validated with quite good analytical results including low limits of detection (0.01-0.06 ng L(-1) for 100 mL of water) and good linearity (r2>0.993) throughout the studied concentration ranges. The method provided good accuracy (recoveries of 85-103%) and precision (between- and within-day RSD values less than 7%) in the determination of the pharmaceuticals and hormones in tap, river, pond, well, swimming pool and wastewater.

Detection and quantitation of β-blockers in plasma and urine

β-blockers are a class of antihypertensive drugs that are used for the management of cardiac arrhythmias, cardioprotection after myocardial infarction (heart attack) and hypertension. They have revolutionized the medical management of angina pectoris and are recommended as first-line agents by national and international guidelines. Although β-blockers are still the cornerstone for the treatment of heart failure, some of the drugs in this category are prohibited in several sports requiring vehicle control and bodily movements as they reduce heart rate and tremors, and improve performance. As a result, urine analysis of β-blockers is mandatory in doping control and toxicological screening. The determination of plasma levels of β-blockers helps to ensure noncompliance in patients with persistent hypertonia to confirm the diagnosis of β-blocker poisoning and for therapeutic drug monitoring. This review provides a comprehensive account of various analytical methods developed for detection and quantitation of β-blockers in plasma and urine.