Advances in Rhodium-Catalyzed Oxidative Arene Alkenylation

Rhodium-Catalyzed Arene Alkenylation: Selectivity and Reaction Mechanism as a Function of In Situ Oxidant Identity

Rhodium catalyzed arene alkenylation reactions with arenes and olefins using dioxygen as the direct oxidant (e.g., ACS Catal. 2020, 10, 11519), Cu(II) carboxylates (e.g., Science 2015, 348, 421; J. Am. Chem. Soc. 2017, 139, 5474) or Fe(III) carboxylate clusters (e.g., ACS Catal. 2024, 14, 10295), in the presence or absence of dioxygen, have been reported. These processes involve heating catalyst precursor [(η2-C2H4)2Rh(μ-OAc)]2, olefin, arene, and oxidant at temperatures between 120 and 200 °C. Herein, we report comparative studies of Rh-catalyzed arene alkenylation as a function of oxidant identity. This work includes comparisons of catalysis using Cu(II) carboxylates in the presence and absence of dioxygen, catalysis with only dioxygen as the oxidant, and Fe(III) carboxylates in the presence and absence of dioxygen. We report studies of catalysis with each oxidant including reagent concentration dependencies and kinetic isotope effect experiments using C6H6 or C6D6 and protio- or deutero carboxylic acid. Additionally, we probe ortho/meta/para regioselectivity for reactions of ethylene with monosubstituted arenes and Markovnikov/anti-Markovnikov selectivity with monosubstituted olefins. These studies indicate that the variation of oxidant identity impacts catalyst speciation, the reaction mechanism, and the reaction rate. Consequently, distinct Markovnikov/anti-Markovnikov and ortho/meta/para selectivities are observed for catalysis with each oxidant.

Hexa-Fe(III) Carboxylate Complexes Facilitate Aerobic Hydrocarbon Oxidative Functionalization: Rh Catalyzed Oxidative Coupling of Benzene and Ethylene to Form Styrene

Fe(II) carboxylates react with dioxygen and carboxylic acid to form Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 (X = acetate or pivalate), which is an active oxidant for Rh-catalyzed arene alkenylation. Heating (150-200 °C) the catalyst precursor [(η2-C2H4)2Rh(μ-OAc)]2 with ethylene, benzene, Fe(II) carboxylate, and dioxygen yields styrene >30-fold faster than the reaction with dioxygen in the absence of the Fe(II) carboxylate additive. It is also demonstrated that Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 is an active oxidant under anaerobic conditions, and the reduced material can be reoxidized to Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 by dioxygen. At optimized conditions, a turnover frequency of ∼0.2 s-1 is achieved. Unlike analogous reactions with Cu(II) carboxylate oxidants, which undergo stoichiometric Cu(II)-mediated production of phenyl esters (e.g., phenyl acetate) as side products at temperatures ≥150 °C, no phenyl ester side product is observed when Fe carboxylate additives are used. Kinetic isotope effect experiments using C6H6 and C6D6 give k H/k D = 3.5(3), while the use of protio or monodeutero pivalic acid reveals a small KIE with k H/k D = 1.19(2). First-order dependencies on Fe(II) carboxylate and dioxygen concentration are observed in addition to complicated kinetic dependencies on the concentration of carboxylic acid and ethylene, both of which inhibit the reaction rate at a high concentration. Mechanistic studies are consistent with irreversible benzene C-H activation, ethylene insertion into the formed Rh-Ph bond, β-hydride elimination, and reaction of Rh-H with Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 to regenerate a Rh-carboxylate complex.

Rhodium-Catalyzed Oxidative Alkenylation of Anisole: Control of Regioselectivity

We report the conversion of anisoles and olefins to alkenyl anisoles via a transition-metal-catalyzed arene C-H activation and olefin insertion mechanism. The catalyst precursor, [(η2-C2H4)2Rh(μ-OAc)]2, and the in situ oxidant Cu(OPiv)2 (OPiv = pivalate) convert anisoles and olefins (ethylene or propylene) to alkenyl anisoles. When ethylene is used as the olefin, the o/m/p ratio varies between approximately 1:3:1 (selective for 3-methoxystyrene) and 1:5:10 (selective for 4-methoxystyrene). When propylene is the olefin, the o/m/p regioselectivity varies between approximately 1:8:20 and 1:8.5:5. The o/m/p ratios depend on the concentration of pivalic acid and olefin. For example, when using ethylene, at relatively high pivalic acid concentrations and low ethylene concentrations, the o/m/p regioselectivity is 1:3:1. Conversely, again for use of ethylene, at relatively low pivalic acid concentrations and high ethylene concentrations, the o/m/p regioselectivity is 1:5:10. Mechanistic studies of the conversion of anisoles and olefins to alkenyl anisoles provide evidence that the regioselectivity is likely under Curtin-Hammett conditions.

Transition-Metal-Catalyzed Transformations for the Synthesis of Marine Drugs

Transition metal catalysis has contributed to the discovery of novel methodologies and the preparation of natural products, as well as new chances to increase the chemical space in drug discovery programs. In the case of marine drugs, this strategy has been used to achieve selective, sustainable and efficient transformations, which cannot be obtained otherwise. In this perspective, we aim to showcase how a variety of transition metals have provided fruitful couplings in a wide variety of marine drug-like scaffolds over the past few years, by accelerating the production of these valuable molecules.

Highly Anti-Markovnikov Selective Oxidative Arene Alkenylation Using Ir(I) Catalyst Precursors and Cu(II) Carboxylates

The Ir(I) complex [Ir(μ-Cl)(coe)2]2 (coe = cis-cyclooctene) is a catalyst precursor for benzene alkenylation using Cu(II) carboxylate salts. Using [Ir(μ-Cl)(coe)2]2, propenylbenzenes are formed from the reaction of benzene, propylene, and CuX2 (X = acetate, pivalate, or 2-ethylhexanoate). The Ir-catalyzed reactions selectively produce anti-Markovnikov products, trans-β-methylstyrene, cis-β-methylstyrene, and allylbenzene, along with minor amounts of the Markovnikov product, α-methylstyrene. The selectivity for the anti-Markovnikov products changed as the reaction progressed. For example, in a reaction that uses 240 equiv of Cu(OHex)2 (related to Ir), the selectivity for the anti-Markovnikov products increases from 18:1 at 3 h to 42:1 at 42 h with 30 psig of propylene at 150 °C. Studies of product stability have revealed that the increase in the selectivity for anti-Markovnikov products is not the result of an isomerization process or the selective decomposition of specific products. Rather, the change in selectivity correlates with the ratio of Cu(II) to Cu(I) in the solution, which decreases as the reaction progresses. We propose that the identity of the active catalyst changes as Cu(I) is accumulated, resulting in the formation of an active catalyst that is more selective for anti-Markovnikov products. Using a 4:1 Cu(I)/Cu(II) ratio at the start of the reaction, a 65(3):1 anti-Markovnikov/Markovnikov ratio is observed.

To What Extent Do Iodomethane and Bromomethane Undergo Analogous Reactions?

Iodomethane and bromomethane (CH3I/CH3Br) are common chemicals, but their chemistry on nanometals is not fully understood. Here, we analyze the reactivity of Rhn+ (n = 3-30) clusters with halomethanes and unveil the spin effect and concentration dependence in the C-H and C-X bond activation. It is found that the reactions under halomethane-rich conditions differ from those under metal-rich conditions. Both CH3I and CH3Br undergo similar dehydrogenation on the Rhn+ clusters in the presence of small quantity reactants; however, different reactions are observed in the presence of sufficient CH3I/CH3Br, showing dominant Rh(CH3Br)x+ (x = 1-4) products but a series of RhnCxHyIz+ species (x = 1-4, y = 1-12, and z = 1-5) pertaining to H2, HI, or CH4 removal. Density functional theory calculations reveal that the dehydrogenation and demethanation of CH3Br are relatively less exothermic and will be deactivated by sufficient gas collisions if helium cooling takes away energy immediately; instead, the successive adsorption of CH3Br gives rise to a series of Rh(CH3Br)x+ species with accidental C-Br bond dissociation.

Pd(II) and Rh(I) Catalytic Precursors for Arene Alkenylation: Comparative Evaluation of Reactivity and Mechanism Based on Experimental and Computational Studies

We combine experimental and computational investigations to compare and understand catalytic arene alkenylation using the Pd(II) and Rh(I) precursors Pd(OAc)₂ and [(η²-C₂H₄)₂Rh(μ-OAc)]₂ with arene, olefin, and Cu(II) carboxylate at elevated temperatures (>120 °C). Under specific conditions, previous computational and experimental efforts have identified heterotrimetallic cyclic PdCu₂(η²-C₂H₄)₃(μ-OPiv)₆ and [(η²-C₂H₄)₂Rh(μ-OPiv)₂]₂(μ-Cu) (OPiv = pivalate) species as likely active catalysts for these processes. Further studies of catalyst speciation suggest a complicated equilibrium between Cu(II)-containing complexes containing one Rh or Pd atom with complexes containing two Rh or Pd atoms. At 120 °C, Rh catalysis produces styrene >20-fold more rapidly than Pd. Also, at 120 °C, Rh is ∼98% selective for styrene formation, while Pd is ∼82% selective. Our studies indicate that Pd catalysis has a higher predilection toward olefin functionalization to form undesired vinyl ester, while Rh catalysis is more selective for arene/olefin coupling. However, at elevated temperatures, Pd converts vinyl ester and arene to vinyl arene, which is proposed to occur through low-valent Pd(0) clusters that are formed in situ. Regardless of arene functionality, the regioselectivity for alkenylation of mono-substituted arenes with the Rh catalyst gives an approximate 2:1 meta/para ratio with minimal ortho C-H activation. In contrast, Pd selectivity is significantly influenced by arene electronics, with electron-rich arenes giving an approximate 1:2:2 ortho/meta/para ratio, while the electron-deficient (α,α,α)-trifluorotoluene gives a 3:1 meta/para ratio with minimal ortho functionalization. Kinetic intermolecular arene ethenylation competition experiments find that Rh reacts most rapidly with benzene, and the rate of mono-substituted arene alkenylation does not correlate with arene electronics. In contrast, with Pd catalysis, electron-rich arenes react more rapidly than benzene, while electron-deficient arenes react less rapidly than benzene. These experimental findings, in combination with computational results, are consistent with the arene C-H activation step for Pd catalysis involving significant η¹-arenium character due to Pd-mediated electrophilic aromatic substitution character. In contrast, the mechanism for Rh catalysis is not sensitive to arene-substituent electronics, which we propose indicates less electrophilic aromatic substitution character for the Rh-mediated arene C-H activation.

p-Xylene Oxidation to Terephthalic Acid: New Trends

Large-scale terephthalic acid production from the oxidation of p-xylene is an especially important process in the polyester industry, as it is mainly used in polyethylene terephthalate (PET) manufacturing, a polymer that is widely used in fibers, films, and plastic products. This review presents and discusses catalytic advances and new trends in terephthalic acid production (since 2014), innovations in terephthalic acid purification processes, and simulations of reactors and reaction mechanisms.

Late-stage ortho-C-H alkenylation of 2-arylindazoles in aqueous medium by Manganese(i)-catalysis

Earth-abundant and water-tolerant manganese(i) catalyzed alkenylation of 2-arylindazole with alkyl and aryl alkynes through C–H bond activation is described with a unique level of E-selectivity. The reaction proceeds through the control of C3 nucleophilicity of 2-aryl indazoles. This method is applied to the late-stage functionalization of complex molecules including ethinylestradiol, norethisterone, and N-protected amino acid derivatives. The kinetic isotope studies suggest that the C–H bond activation step may not be the rate-determining step.

Earth-abundant and water-tolerant manganese(i) catalyzed alkenylation of 2-arylindazole with alkyl and aryl alkynes through C–H bond activation is described with a unique level of E-selectivity.

Electron-Deficient Ru(II) Complexes as Catalyst Precursors for Ethylene Hydrophenylation

Ruthenium(II) complexes with the general formula TpRu(L)(NCMe)Ph (Tp = hydrido(trispyrazolyl)borate, L = CO, PMe3, P(OCH2)3CEt, P(pyr)3, P(OCH2)2(O)CCH3) have previously been shown to catalyze arene alkylation via Ru-mediated arene C–H activation including the conversion of benzene and ethylene to ethylbenzene. Previous studies have suggested that the catalytic performance of these TpRu(II) catalysts increases with reduced electron-density at the Ru center. Herein, three new structurally related Ru(II) complexes are synthesized, characterized, and studied for possible catalytic benzene ethylation. TpRu(NO)Ph2 exhibited low stability due to the facile elimination of biphenyl. The Ru(II) complex (TpBr3)Ru(NCMe)(P(OCH2)3CEt)Ph (TpBr3 = hydridotris(3,4,5-tribromopyrazol-1-yl)borate) showed no catalytic activity for the conversion of benzene and ethylene to ethylbenzene, likely due to the steric bulk introduced by the bromine substituents. (Ttz)Ru(NCMe)(P(OCH2)3CEt)Ph (Ttz = hydridotris(1,2,4-triazol-1-yl)borate) catalyzed approximately 150 turnover numbers (TONs) of ethylbenzene at 120 °C in the presence of Lewis acid additives. Here, we compare the activity and features of catalysis using (Ttz)Ru(NCMe)(P(OCH2)3CEt)Ph to previously reported catalysis based on TpRu(L)(NCMe)Ph catalyst precursors.

Recent advances in rhodium-catalysed cross-dehydrogenative-coupling between two C(sp2)-H bonds

Rhodium-catalysed cross-dehydrogenative coupling (CDC) has received considerable attention in recent years. This modern technology has been considered as an attractive synthetic tool for selective C−C bond formation due to (1)...

1H NMR Analysis of the Metathesis Reaction between 1-Hexene and (E)-Anethole Using Grubbs 2nd Generation Catalyst: Effect of Reaction Conditions on (E)-1-(4-Methoxyphenyl)-1-hexene Formation and Decomposition

The metathesis of 1-hexene and (E)-anethole in the presence of Grubbs 2nd generation catalyst was monitored by in situ 1H NMR spectroscopy at different temperatures (15 °C, 25 °C, and 45 °C) and anethole mol fractions (XAnethole ≈ 0.17, 0.29, 0.5, 0.71, 0.83). Time traces confirmed the instantaneous formation of (E)-1-(4-methoxyphenyl)-1-hexene, the cross-metathesis product. A maximum concentration of (E)-1-(4-methoxyphenyl)-1-hexene is reached fairly fast (the time depending on the reaction conditions), and this is followed by a decrease in the concentration of (E)-1-(4-methoxyphenyl)-1-hexene due to secondary metathesis. The maximum concentration of (E)-1-(4-methoxyphenyl)-1-hexene was more dependent on the XAnethole than the temperature. The highest TOF (3.46 min−1) was obtained for the reaction where XAnethole was 0.16 at 45 °C. The highest concentration of the cross-metathesis product was however achieved after 6 min with an anethole mol fraction of 0.84 at 25 °C. A preliminary kinetic study indicated that the secondary metathesis reaction followed first order kinetics.

Ortho C-H Functionalization of 2-Arylimidazo[1,2-a]pyridines

C-H activation and functionalization is quite promising in recent days as the strategy offers a go-to general method for different bond formations and hence grants synthetic versatility. At the same time, imidazopyridine, a fused bicycle of imidazole moiety with pyridine ring, has a profound impact due to its ubiquitous and prodigious application in medicinal as well as material chemistry. The presence of N-1 atom in 2-arylImidazo[1,2-a]pyridine facilitates the coordination with metal catalysts leading to the formation of ortho-substituted products. This review summarizes all the articles on ortho C-H functionalization of 2-arylImidazo[1,2-a]pyridines published till August 2021.

Rhodium-Catalyzed and Chiral Zinc Carboxylate-Assisted Allenylation of Benzamides via Kinetic Resolution

Enantioenriched allenes are important building blocks. While they have been accessed by other coupling methodologies, enantioenriched allenes have been rarely obtained via C-H activation. In this work, kinetic resolution of tertiary propargyl alcohols as an allenylating reagent has been realized via rhodium(III)-catalyzed C-H allenylation of benzamides. The reaction proceeded efficiently under mild conditions, and both the allenylated products and the propargyl alcohols were obtained in high enantioselectivities with an s-factor of up to 139. The resolution results from bias of the two propargylic substituents and is assisted by a chiral zinc carboxylate additive.

Rhodium-Catalyzed Oxidative Annulation of 2- or 7-Arylindoles with Alkenes/Alkynes Using Molecular Oxygen as the Sole Oxidant Enabled by Quaternary Ammonium Salt

Developing an efficient catalytic system using molecular oxygen as the oxidant for rhodium-catalyzed cross-dehydrogenative coupling remains highly desirable. Herein, rhodium-catalyzed oxidative annulation of 2- or 7-phenyl-1H-indoles with alkenes or alkynes to assemble valuable 6H-isoindolo[2,1-a]indoles, pyrrolo[3,2,1-de]phenanthridines, or indolo[2,1-a]isoquinolines using the atmospheric pressure of air as the sole oxidant enabled by quaternary ammonium salt has been accomplished. Mechanistic studies provided evidence for the fast intramolecular aza-Michael reaction and aerobic reoxidation of Rh(I)/Rh(III), facilitated by the addition of quaternary ammonium salt.

Stereoselective rhodium-catalyzed 2-C-H 1,3-dienylation of indoles: dual functions of the directing group

A rhodium-catalyzed intermolecular highly stereoselective 1,3-dienylation at the 2-position of indoles with non-terminal allenyl carbonates has been developed by using 2-pyrimidinyl or pyridinyl as the directing group. The reaction tolerates many functional groups affording the products in decent yields under mild conditions. In addition to C-H bond activation, the directing group also played a vital role in the determination of Z-stereoselectivity for the C-H functionalization reaction with 4-aryl-2,3-allenyl carbonates, which is confirmed by the E-selectivity observed with 4-alkyl-2,3-allenyl carbonates. DFT calculations have been conducted to reveal that π-π stacking involving the directing 2-pyrimidinyl or pyridinyl group is the origin of the observed stereoselectivity. Various synthetic transformations have also been demonstrated.

Rh(III)-Catalyzed Chemoselective C-H Alkenylation and [5 + 1] Annulation with Gem-Difluoromethylene Enabled by the Distinctive Fluorine Effect

The efficient couplings of diverse N-arylureas and gem-difluoromethylene alkynes have been realized via Rh(III)-catalyzed chemoselective C-H alkenylation and [5 + 1] annulation, which were induced by the distinctive fluorine effect to provide the different coordination mode of the Rh(III) catalyst binding to the directing group, thereby giving the direct access to difluorinated 2-alkenyl arylureas and 3,4-dihydroquinazolin-2(1H)-ones bearing both an α-quaternary carbon center and a monofluoroalkenyl moiety with broad substrate compatibility and good functional group tolerance. The synthetic application in C-H alkenylation of the N-pyridylaniline, the late-stage [3 + 2] annulation, and the derivation of the obtained products has been also demonstrated to further strengthen the synthetic utility of the chemodivergent transformations.

Hydroarylation of olefins catalysed by a dimeric ytterbium(II) alkyl

Although the nucleophilic alkylation of aromatics has recently been achieved with a variety of potent main group reagents, all of this reactivity is limited to a stoichiometric regime. We now report that the ytterbium(II) hydride, [BDIDippYbH]2 (BDIDipp = CH[C(CH3)NDipp]2, Dipp = 2,6-diisopropylphenyl), reacts with ethene and propene to provide the ytterbium(II) n-alkyls, [BDIDippYbR]2 (R = Et or Pr), both of which alkylate benzene at room temperature. Density functional theory (DFT) calculations indicate that this latter process operates through the nucleophilic (SN2) displacement of hydride, while the resultant regeneration of [BDIDippYbH]2 facilitates further reaction with ethene or propene and enables the direct catalytic (anti-Markovnikov) hydroarylation of both alkenes with a benzene C-H bond.

Rhodium chemistry: A gas phase cluster study

Due to the extraordinary catalytic activity in redox reactions, the noble metal, rhodium, has substantial industrial and laboratory applications in the production of value-added chemicals, synthesis of biomedicine, removal of automotive exhaust gas, and so on. The main drawback of rhodium catalysts is its high-cost, so it is of great importance to maximize the atomic efficiency of the precious metal by recognizing the structure-activity relationship of catalytically active sites and clarifying the root cause of the exceptional performance. This Perspective concerns the significant progress on the fundamental understanding of rhodium chemistry at a strictly molecular level by the joint experimental and computational study of the reactivity of isolated Rh-based gas phase clusters that can serve as ideal models for the active sites of condensed-phase catalysts. The substrates cover the important organic and inorganic molecules including CH₄, CO, NO, N₂, and H₂. The electronic origin for the reactivity evolution of bare Rh_x ^q clusters as a function of size is revealed. The doping effect and support effect as well as the synergistic effect among heteroatoms on the reactivity and product selectivity of Rh-containing species are discussed. The ingenious employment of diverse experimental techniques to assist the Rh₁- and Rh₂-doped clusters in catalyzing the challenging endothermic reactions is also emphasized. It turns out that the chemical behavior of Rh identified from the gas phase cluster study parallels the performance of condensed-phase rhodium catalysts. The mechanistic aspects derived from Rh-based cluster systems may provide new clues for the design of better performing rhodium catalysts including the single Rh atom catalysts.

Advances in Group 10 Transition-Metal-Catalyzed Arene Alkylation and Alkenylation

On a large scale, the dominant method to produce alkyl arenes has been arene alkylation from arenes and olefins using acid-based catalysis. The addition of arene C-H bonds across olefin C═C bonds catalyzed by transition-metal complexes through C-H activation and olefin insertion into metal-aryl bonds provides an alternative approach with potential advantages. This Perspective presents recent developments of olefin hydroarylation and oxidative olefin hydroarylation catalyzed by molecular complexes based on group 10 transition metals (Ni, Pd, Pt). Emphasis is placed on comparisons between Pt catalysts and other group 10 metal catalysts as well as Ru, Ir, and Rh catalysts.

Rhodium-Catalyzed Redox-Neutral Olefination of Aryldiazenes with Acrylate Esters via C-H Activation and Transfer Hydrogenation

Rh(III)-catalyzed redox-neutral C-H olefination of aryldiazenecarboxylates has been realized using arylate esters as the olefinating reagents. This reaction proceeds under mild and redox-neutral conditions, resulting in integration of C-H activation and transfer hydrogenation. The chemoselectivity complements that of previously reported rhodium-catalyzed coupling of the same substrates.

Rh(III)-Catalyzed Redox-Neutral C-H Activation/[3 + 2] Annulation of N-Phenoxy Amides with Propargylic Monofluoroalkynes

An efficient and redox-neutral Rh(III)-catalyzed C-H activation/[3 + 2] annulation of N-phenoxy amides with propargylic monofluoroalkynes has been realized to afford 3-alkylidene dihydrobenzofurans with an interesting α-quaternary carbon center. Combined experimental and computational mechanistic studies revealed that a Rh(III)-Rh(V)-Rh(III) catalytic pathway/uncatalyzed intramolecular [H···F] bonding-assisted S_N2'-type substitution cascade might be involved in the catalytic cycle, thereby enabling an excellent site-/regioselectivity with broad substrate/functional group compatibility, including the complete retention of the highly strained cyclobutyl structure in the 3-position.

Olefin Hydroarylation Catalyzed by a Single-Component Cobalt(-I) Complex

A single-component Co(-I) catalyst, [(PPh₃)₃Co(N₂)]Li(THF)₃, has been developed for olefin hydroarylations with (N-aryl)aryl imine substrates. More than 40 examples were examined under mild reaction conditions to afford the desired alkyl-arene product in good to excellent yields. Catalysis occurs in a regioselective manner to afford exclusively branched products with styrene-derived substrates or linear products for aliphatic olefins. Electron-withdrawing functional groups (e.g., -F, -CF₃, and -CO₂Me) were tolerated under the reaction conditions.

Recent advances in Rh(iii)/Ir(iii)-catalyzed C–H functionalization/annulation via carbene migratory insertion

The review highlighted diverse annulations, including nitrogen, oxygen, sulfur heterocycles and carbocylizations via Rh(iii)/Ir(iii)-catalyzed C–H functionalization/annulation with various arene and carbene precursors.

Cp*Co(III)-Catalyzed C-H Hydroarylation of Alkynes and Alkenes and Beyond: A Versatile Synthetic Tool

The use of earth-abundant first-row transition metals, such as cobalt, in C-H activation reactions for the construction and functionalization of a wide variety of structures has become a central topic in synthetic chemistry over the last few years. In this context, the emergence of cobalt catalysts bearing pentamethylcyclopentadienyl ligands (Cp*) has had a major impact on the development of synthetic methodologies. Cp*Co(III) complexes have been proven to possess unique reactivity compared, for example, to their Rh(III) counterparts, obtaining improved chemo- or regioselectivities, as well as yielding new reactivities. This perspective is focused on recent advances on the alkylation and alkenylation reactions of (hetero)arenes with alkenes and alkynes under Cp*Co(III) catalysis.

Deaminative carbonylative coupling of alkylamines with styrenes under transition-metal-free conditions

Transition-metal-free deaminative carbonylation through C–N bonds activation via Katritzky salts has been successful developed. Various α,β-unsaturated ketones were obtained in moderate to good yields with alkylamines and styrenes as the substrates.