Pentanuclear Scaffold: A Molecular Platform for Small-Molecule Conversions

Pentanuclear iron complex for water oxidation: spectroscopic analysis of reactive intermediates in solution and catalyst immobilization into the MOF-based photoanode

Photoelectrochemical water splitting can produce green hydrogen for industrial use and CO2-neutral transportation, ensuring the transition from fossil fuels to green, renewable energy sources. The iron-based electrocatalyst [FeII4FeIII(μ-3-O)(μ-L)6]3+ (LH = 3,5-bis(2-pyridyl)pyrazole) (1), discovered in 2016, is one of the fastest molecular water oxidation catalysts (WOC) based on earth-abundant elements. However, its water oxidation reaction mechanism has not been yet fully elucidated. Here, we present in situ X-ray spectroscopy and electron paramagnetic resonance (EPR) analysis of electrochemical water oxidation reaction (WOR) promoted by (1) in water-acetonitrile solution. We observed transient reactive intermediates during the in situ electrochemical WOR, consistent with a coordination sphere expansion prior to the onset of catalytic current. At a pre-catalytic (~+1.1 V vs. Ag/AgCl) potential, the distinct g~2.0 EPR signal assigned to FeIII/FeIV interaction was observed. Prolonged bulk electrolysis at catalytic (~+1.6 V vs. Ag/AgCl) potential leads to the further oxidation of Fe centers in (1). At the steady state achieved with such electrolysis, the formation of hypervalent FeV=O and FeIV=O catalytic intermediates was inferred with XANES and EXAFS fitting, detecting a short Fe=O bond at ~1.6 Å. (1) was embedded into MIL-126 MOF with the formation of (1)-MIL-126 composite. The latter was tested in photoelectrochemical WOR and demonstrated an improvement of electrocatalytic current upon visible light irradiation in acidic (pH=2) water solution. The presented spectroscopic analysis gives further insight into the catalytic pathways of multinuclear systems and should help the subsequent development of more energy- and cost-effective catalysts of water splitting based on earth-abundant metals. Photoelectrocatalytic activity of (1)-MIL-126 confirms the possibility of creating an assembly of (1) inside a solid support and boosting it with solar irradiation towards industrial applications of the catalyst.

Breaking bonds and breaking rules: inert-bond activation by [(iPr3P)Ni]5H4 and catalytic stereospecific norbornene dimerization

The facile carbon atom abstraction reaction by [(ⁱPr₃P)Ni]₅H₆ (1) with various terminal alkenes to give [(ⁱPr₃P)Ni]₅H₄(μ₅-C) (2) occurs via a common highly reactive intermediate [(ⁱPr₃P)Ni]₅H₄ (3), which was isolated by the reaction of 1 with norbornene. Temperature dependent ¹H and ³¹P{¹H} NMR chemical shifts of 3 are consistent with a thermally populated triplet excited state only 2 kcal mol^-1 higher energy than the diamagnetic ground state. Complex 3 catalyzes the dimerization of norbornene to stereoselectively provide exclusively (Z) anti-(bis-2,2'-norbornylidene).

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Brønsted Acid/Base Site Isolated in a Pentanuclear Scaffold

The concept of Brønsted-Lowry acids and bases is long and widely recognized as the most reasonable theory to explain the behavior of H⁺ ions. Here, we report a Brønsted acid/base pair that does not follow this theory. Two heteronuclear metal complexes, in which Brønsted acid/base sites are sterically isolated, were synthesized and characterized. These sterically isolated sites exhibited anomalous behavior, wherein the H⁺ species encapsulated in the Brønsted acid site did not undergo a deprotonation reaction, and the corresponding protonation reaction at the Brønsted base site failed to proceed. As a result, two states that are in a relationship of a Brønsted acid/base pair stably exist over a wide pH range without any interconversion, generating a thermodynamically metastable state. Additionally, these two states exhibited distinct electron transfer abilities and reactivities. The system presented in this study is in sharp contrast with the traditional concept of Brønsted-Lowry acids and bases.

Metal-Corrole-Based Porous Organic Polymers for Electrocatalytic Oxygen Reduction and Evolution Reactions

Integrating molecular catalysts into designed frameworks often enables improved catalysis. Compared with porphyrin-based frameworks, metal-corrole-based frameworks have been rarely developed, although monomeric metal corroles are usually more efficient than porphyrin counterparts for the electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). We herein report on metal-corrole-based porous organic polymers (POPs) as ORR and OER electrocatalysts. M-POPs (M=Mn, Fe, Co, Cu) were synthesized by coupling metal 10-phenyl-5,15-(4-iodophenyl)corrole with tetrakis(4-ethynylphenyl)methane. Compared with metal corrole monomers, M-POPs displayed significantly enhanced catalytic activity and stability. Co-POP outperformed other M-POPs by achieving four-electron ORR with a half-wave potential of 0.87 V vs. RHE and reaching 10 mA cm^-2 OER current density at 340 mV overpotential. This work is unparalleled to develop and explore metal-corrole-based POPs as electrocatalysts.

Metalloporphyrins as Catalytic Models for Studying Hydrogen and Oxygen Evolution and Oxygen Reduction Reactions

The hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) are involved in biological and artificial energy conversions. H-H and O-O bond formation/cleavage are essential steps in these reactions. In nature, intermediates involved in the H-H and O-O bond formation/cleavage are highly reactive and short-lived, making their identification and investigation difficult. In artificial catalysis, the realization of these reactions at considerable rates and close to their thermodynamic reaction equilibria remains a challenge. Therefore, the elucidation of the reaction mechanisms and structure-function relationships is of fundamental significance to understand these reactions and to develop catalysts.This Account describes our recent investigations on catalytic HER, OER, and ORR with metalloporphyrins and derivatives. Metalloporphyrins are used in nature for light harvesting, energy conversion, electron transfer, O₂ activation, and peroxide degradation. Synthetic metal porphyrin complexes are shown to be active for these reactions. We focused on exploring metalloporphyrins to study reaction mechanisms and structure-function relationships because they have stable and tunable structures and characteristic spectroscopic properties.For HER, we identified three H-H bond formation mechanisms and established the correlation between these processes and metal hydride electronic structures. Importantly, we provided direct experimental evidence for the bimetallic homolytic H-H bond formation mechanism by using sterically bulky porphyrins. Homolytic HER has been long proposed but rarely verified because the coupling of active hydride intermediates occurs spontaneously and quickly, making their detection challenging. By blocking the bimolecular mechanism through steric effects, we stabilized and characterized the Ni^III-H intermediate and verified homolytic HER by comparing the reaction behaviors of Ni porphyrins with and without steric effects. We therefore provided an unprecedented example to control homolytic versus heterolytic HER mechanisms through tuning steric effects of molecular catalysts.For the OER, the water nucleophilic attack (WNA) on high-valent terminal Mn-oxo has been proposed for the O-O bond formation in natural and artificial water oxidation. By using Mn tris(pentafluorophenyl)corrole, we identified Mn^V(O) and Mn^IV-peroxo intermediates in chemical and electrochemical OER and provided direct experimental evidence for the Mn-based WNA mechanism. Moreover, we demonstrated several catalyst design strategies to enhance the WNA rate, including the pioneering use of protective axial ligands. By studying Cu porphyrins, we proposed a bimolecular coupling mechanism between two metal-hydroxide radicals to form O-O bonds. Note that late-transition metals do not likely form terminal metal-oxo/oxyl.For the ORR, we presented several strategies to improve activity and selectivity, including providing rapid electron transfer, using electron-donating axial ligands, introducing hydrogen-bonding interactions, constructing dinuclear cooperation, and employing porphyrin-support domino catalysis. Importantly, we used Co porphyrin atropisomers to realize both two-electron and four-electron ORR, representing an unparalleled example to control ORR selectivity by tuning only steric effects without modifying molecular and/or electronic structures.Lastly, we developed several strategies to graft metalloporphyrins on various electrode materials through different covalent bonds. The molecular-engineered materials exhibit boosted electrocatalytic performance, highlighting promising applications of molecular electrocatalysis. Taken together, this Account demonstrates the benefits of exploring metalloporphyrins for the HER, OER, and ORR. The knowledge learned herein is valuable for the development of porphyrin-based catalysts and also other molecular and material catalysts for small molecule activation reactions.

Homogeneous Water Oxidation Catalyzed by First-Row Transition Metal Complexes: Unveiling the Relationship between Turnover Frequency and Reaction Overpotential

The utilization of earth-abundant low-toxicity metal ions in the construction of highly active and efficient molecular catalysts promoting the water oxidation reaction is important for developing a sustainable artificial energy cycle. However, the kinetic and thermodynamic properties of the currently available molecular water oxidation catalysts (MWOCs) have not been comprehensively investigated. This Review summarizes the current status of MWOCs based on first-row transition metals in terms of their turnover frequency (TOF, a kinetic property) and overpotential (η, a thermodynamic property) and uses the relationship between log(TOF) and η to assess catalytic performance. Furthermore, the effects of the same ligand classes on these MWOCs are discussed in terms of TOF and η, and vice versa. The collective analysis of these relationships provides a metric for the direct comparison of catalyst systems and identifying factors crucial for catalyst design.

Design of molecular water oxidation catalysts with earth-abundant metal ions

The four-electron oxidation of water (2H2O → O2 + 4H+ + 4e-) is considered the main bottleneck in artificial photosynthesis. In nature, this reaction is catalysed by a Mn4CaO5 cluster embedded in the oxygen-evolving complex of photosystem II. Ruthenium-based complexes have been successful artificial molecular catalysts for mimicking this reaction. However, for practical and large-scale applications in the future, molecular catalysts that contain earth-abundant first-row transition metal ions are preferred owing to their high natural abundance, low risk of depletion, and low costs. In this review, the frontier of water oxidation reactions mediated by first-row transition metal complexes is described. Special attention is paid towards the design of molecular structures of the catalysts and their reaction mechanisms, and these factors are expected to serve as guiding principles for creating efficient and robust molecular catalysts for water oxidation using ubiquitous elements.

Electrochemical Polymerization Provides a Function-Integrated System for Water Oxidation

Water oxidation is a key reaction in natural and artificial photosynthesis. In nature, the reaction is efficiently catalyzed by a metal-complex-based catalyst surrounded by hole-transporting amino acid residues. However, in artificial systems, there is no example of a water oxidation system that has a catalytic center surrounded by hole transporters. Herein, we present a facile strategy to integrate catalytic centers and hole transporters in one system. Electrochemical polymerization of a metal-complex-based precursor afforded a polymer-based material (Poly-1). Poly-1 exhibited excellent hole-transporting ability and catalyzed water oxidation with high performance. It was also revealed that the catalytic activity was almost completely suppressed in the absence of the hole-transporting moieties. The present study provides a novel strategy for constructing efficient molecule-based systems for water oxidation.