A Powerful Protocol Based on Anode-Free Cells Combined with Various Analytical Techniques

Anode-Free Li Metal Batteries: Feasibility Analysis and Practical Strategy

Energy storage devices are striving to achieve high energy density, long lifespan, and enhanced safety. In view of the current popular lithiated cathode, anode-free lithium metal batteries (AFLMBs) will deliver the theoretical maximum energy density among all the battery chemistries. However, AFLMBs face challenges such as low plating-stripping efficiency, significant volume change, and severe Li-dendrite growth, which negatively impact their lifespan and safety. This study provides an overview and analysis of recent progress in electrode structure, characterization, performance, and practical challenges of AFLMBs. The deposition behavior of lithium is categorized into two stages: heterogeneous and homogeneous interface deposition. The feasibility and practical application value of AFLMBs are critically evaluated. Additionally, key test models, evaluation parameters, and advanced characterization techniques are discussed. Importantly, practical strategies of different battery components in AFLMBs, including current collector, interface layer, solid-state electrolyte, liquid-state electrolyte, cathode, and cycling protocol, are presented to address the challenges posed by the two types of deposition processes, lithium loss, crosstalk effect and volume change. Finally, the application prospects of AFLMBs are envisioned, with a focus on overcoming the current limitations and unlocking their full potential as high-performance energy storage solutions.

Phosphorized 3D Current Collector for High-Energy Anode-Free Lithium Metal Batteries

The anode-free lithium metal battery (AF-LMB) demonstrates the emerging battery chemistry, exhibiting higher energy density than the existing lithium-ion battery and conventional LMB empirically. A systematic step-by-step while bottom-up calculation system is first developed to quantitatively depict the energy gap from theory to practice. The attainable high energy of AF-LMB necessitates a homogeneous Li+ flux on the anode side to achieve an improved Li reversibility against inventory loss. On such basis, a lithiophilic Cu3P-decorated 3D copper foil to promote dendrite-free lithium deposition is further reported. The phosphorized surface of high affinity toward Li+ incorporating the nanostructure of abundant nucleation sites synergistically regulates the Li nucleation/growth behavior, extending the cycling lifespan of high-loading AF-LMBs. The processed foil featuring lightweight and ultrathin merits further increases the energy density, both gravimetrically and volumetrically. This study provides a novel scheme for simultaneously realizing the uniform deposition of lithium and increasing the energy density of future AF-LMBs.

Chemical Prelithiated 3D Lithiophilic/-Phobic Interlayer Enables Long-Term Li Plating/Stripping

The up-to-date lifespan of zero-excess lithium (Li) metal batteries is limited to a few dozen cycles due to irreversible Li-ion loss caused by interfacial reactions during cycling. Herein, a chemical prelithiated composite interlayer, made of lithiophilic silver (Ag) and lithiophobic copper (Cu) in a 3D porous carbon fiber matrix, is applied on a planar Cu current collector to regulate Li plating and stripping and prevent undesired reactions. The Li-rich surface coating of lithium oxide (Li2O), lithium carboxylate (RCO2Li), lithium carbonates (ROCO2Li), and lithium hydride (LiH) is formed by soaking and directly heating the interlayer in n-butyllithium hexane solution. Although only a thin coating of ∼10 nm is created, it effectively regulates the ionic and electronic conductivity of the interlayer via these surface compounds and reduces defect sites by reactions of n-butyllithium with heteroatoms in the carbon fibers during formation. The spontaneously formed lithiophilic-lithiophobic gradient across individual carbon fiber provides homogeneous Li-ion deposition, preventing concentrated Li deposition. The porous structure of the composite interlayer eliminates the built-in stress upon Li deposition, and the anisotropically distributed carbon fibers enable uniform charge compensation. These features synergistically minimize the side reactions and compensate for Li-ion loss while cycling. The prepared zero-excess Li metal batteries could be cycled 300 times at 1.17 C with negligible capacity fading.

Mechanistic Study on Artificial Stabilization of Lithium Metal Anode via Thermal Pyrolysis of Ammonium Fluoride in Lithium Metal Batteries

The use of the "Holy Grail" lithium metal anode is pivotal to achieve superior energy density. However, the practice of a lithium metal anode faces practical challenges due to the thermodynamic instability of lithium metal and dendrite growth. Herein, an artificial stabilization of lithium metal was carried out via the thermal pyrolysis of the NH4F salt, which generates HF(g) and NH3(g). An exposure of lithium metal to the generated gas induces a spontaneous reaction that forms multiple solid electrolyte interface (SEI) components, such as LiF, Li3N, Li2NH, LiNH2, and LiH, from a single salt. The artificially multilayered protection on lithium metal (AF-Li) sustains stable lithium stripping/plating. It suppresses the Li dendrite under the Li||Li symmetric cell. The half-cell Li||Cu and Li||MCMB systems depicted the attributions of the protective layer. We demonstrate that the desirable protective layer in AF-Li exhibited remarkable capacity retention (CR) results. LiFePO4 (LFP) showed a CR of 90.6% at 0.5 mA cm-2 after 280 cycles, and LiNi0.5Mn0.3Co0.2O2 (NCM523) showed 58.7% at 3 mA cm-2 after 410 cycles. Formulating the multilayered protection, with the simultaneous formation of multiple SEI components in a facile and cost-effective approach from NH4F as a single salt, made the system competent.

Design Strategies for Aqueous Zinc Metal Batteries with High Zinc Utilization: From Metal Anodes to Anode-Free Structures

Aqueous zinc metal batteries (AZMBs) are promising candidates for next-generation energy storage due to the excellent safety, environmental friendliness, natural abundance, high theoretical specific capacity, and low redox potential of zinc (Zn) metal. However, several issues such as dendrite formation, hydrogen evolution, corrosion, and passivation of Zn metal anodes cause irreversible loss of the active materials. To solve these issues, researchers often use large amounts of excess Zn to ensure a continuous supply of active materials for Zn anodes. This leads to the ultralow utilization of Zn anodes and squanders the high energy density of AZMBs. Herein, the design strategies for AZMBs with high Zn utilization are discussed in depth, from utilizing thinner Zn foils to constructing anode-free structures with theoretical Zn utilization of 100%, which provides comprehensive guidelines for further research. Representative methods for calculating the depth of discharge of Zn anodes with different structures are first summarized. The reasonable modification strategies of Zn foil anodes, current collectors with pre-deposited Zn, and anode-free aqueous Zn metal batteries (AF-AZMBs) to improve Zn utilization are then detailed. In particular, the working mechanism of AF-AZMBs is systematically introduced. Finally, the challenges and perspectives for constructing high-utilization Zn anodes are presented.

One-Pot Preparation of Lithium Compensation Layer, Lithiophilic Layer, and Artificial Solid Electrolyte Interphase for Lean-Lithium Metal Anode

Lithium metal is an ideal anode for high-energy-density batteries. However, the low Coulomb efficiency and the generation of dendrites pose a significant limitation to its practical application, while the excess lithium in the battery also generates serious safety concerns. Herein, a layer-by-layer optimized multilayer structure integrating an artificial solid electrolyte interphase (LiF) layer, a lithiophilic (Li_xAu alloy) layer, and a lithium compensation layer is reported for a lean-lithium metal battery, where each layer acts synergistically to stabilize the lithium deposition behaviors and enhances the cycling performance of the battery. The optimized anode could effectively induce homogeneous reversible lithium deposition under the synergistic effect of multilayer films and keep the integrity of the morphological structure unbroken during the deposition. The presence of the lithium compensation layer allows the half-cell to have a high initial CE of 158.9%, and the action of the LiF layer and lithiophilic layer maintains an average CE of 98.8% over 160 cycles, which further demonstrates the stability of the structure. As a result, when combined with LiFePO₄ cathode, an initial capacity of 148 mAh g^-1 and a retention rate of 97.5% over 130 cycles were achieved.