Organic Semiconductor-Organism Interfaces for Augmenting Natural and Artificial Photosynthesis

Spatiotemporal Encapsulation of Tandem Enzymes in Hierarchical Metal-Organic Frameworks for Cofactor-Dependent Photoenzymatic CO2 Conversion

The photo-enzyme coupling system (PECS) holds immense potential in "green" biomanufacturing, encompassing the realms of pharmaceuticals, fuels, and carbon sequestration. Nevertheless, the intricate nature of enzymes' structures significantly impedes the seamless integration of multiple enzymes in a precise, tandem fashion, with exact control over their distribution, posing a formidable challenge. Herein, it has devised a mesoporous csq-type metal organic framework (Zr-MOF) from meso-tetrakis-(4-((phenyl)ethynyl)benzoate)porphyrin (Por-PTP) and Zr6(μ3-O)4(μ3-OH)4(OH)4(H2O)4) nodes (Zr6 clusters), featuring intricate hierarchical hexagonal (5.8 nm) and triangular (2.9 nm) channels, enabling the simultaneous encapsulation of Formate dehydrogenase from Candida boidinii (CbFDH) and ferredoxin-NADP+ reductase (FNR) via a spatiotemporally controlled strategy for cofactor-dependent photoenzymatic carbon dioxide (CO2) conversion. Upon illumination, photoexcited electrons originating from the Zr-MOF frameworks migrate to the adjacent FNR for cofactor NADH regeneration, which is then harnessed by proximal CbFDH for CO2 fixation. Concurrently, the resulting holes are neutralized by AA for system recovery. The results demonstrated the confinement of tandem enzymes within MOF channels significantly enhanced the performance of multi-enzyme cascade pathways as well as augmenting the local NAD+/NADH, which leading to a further improvement in the efficiency of tandem biocatalytic formic acid generation (55 mm) from CO2. Crucially, the photo-enzyme-coupled factories exhibited remarkable stability alongside exceptional recyclability, attributed to the preservation of MOF skeletons.

Evolving Synergy Between Synthetic and Biotic Elements in Conjugated Polyelectrolyte/Bacteria Composite Improves Charge Transport and Mechanical Properties

gLiving materials can achieve unprecedented function by combining synthetic materials with the wide range of cellular functions. Of interest are situations where the critical properties of individual abiotic and biotic elements improve via their combination. For example, integrating electroactive bacteria into conjugated polyelectrolyte (CPE) hydrogels increases biocurrent production. One observes more efficient electrical charge transport within the CPE matrix in the presence of Shewanella oneidensis MR-1 and more current per cell is extracted, compared to traditional biofilms. Here, the origin of these synergistic effects are examined. Transcriptomics reveals that genes in S. oneidensis MR-1 related to bacteriophages and energy metabolism are upregulated in the composite material. Fluorescent staining and rheological measurements before and after enzymatic treatment identified the importance of extracellular biomaterials in increasing matrix cohesion. The synergy between CPE and S. oneidensis MR-1 thus arises from initially unanticipated changes in matrix composition and bacteria adaption within the synthetic environment.

Photoresist Development for 3D Printing of Conductive Microstructures via Two-Photon Polymerization

The advancement of electronic devices necessitates the development of three-dimensional (3D) high-precision conductive microstructures, which have extensive applications in bio-electronic interfaces, soft robots, and electronic skins. Two-photon polymerization (TPP) based 3D printing is a critical technique that offers unparalleled fabrication resolution in 3D space for intricate conductive structures. While substantial progress has been made in this field, this review summarizes recent advances in the 3D printing of conductive microstructures via TPP, mainly focusing on the essential criteria of photoresist resins suitable for TPP. Further preparation strategies of these photoresists and methods for constructing 3D conductive microstructures via TPP are discussed. The application prospects of 3D conductive microstructures in various fields are discussed, highlighting the imperative to advance their additive manufacturing technology. Finally, strategic recommendations are offered to enhance the construction of 3D conductive microstructures using TPP, addressing prevailing challenges and fostering significant advancements in manufacturing technology.

Revisiting Solar Energy Flow in Nanomaterial-Microorganism Hybrid Systems

Nanomaterial-microorganism hybrid systems (NMHSs), integrating semiconductor nanomaterials with microorganisms, present a promising platform for broadband solar energy harvesting, high-efficiency carbon reduction, and sustainable chemical production. While studies underscore its potential in diverse solar-to-chemical energy conversions, prevailing NMHSs grapple with suboptimal energy conversion efficiency. Such limitations stem predominantly from an insufficient systematic exploration of the mechanisms dictating solar energy flow. This review provides a systematic overview of the notable advancements in this nascent field, with a particular focus on the discussion of three pivotal steps of energy flow: solar energy capture, cross-membrane energy transport, and energy conversion into chemicals. While key challenges faced in each stage are independently identified and discussed, viable solutions are correspondingly postulated. In view of the interplay of the three steps in affecting the overall efficiency of solar-to-chemical energy conversion, subsequent discussions thus take an integrative and systematic viewpoint to comprehend, analyze and improve the solar energy flow in the current NMHSs of different configurations, and highlighting the contemporary techniques that can be employed to investigate various aspects of energy flow within NMHSs. Finally, a concluding section summarizes opportunities for future research, providing a roadmap for the continued development and optimization of NMHSs.

Review on Microreactors for Photo-Electrocatalysis Artificial Photosynthesis Regeneration of Coenzymes

In recent years, with the outbreak of the global energy crisis, renewable solar energy has become a focal point of research. However, the utilization efficiency of natural photosynthesis (NPS) is only about 1%. Inspired by NPS, artificial photosynthesis (APS) was developed and utilized in applications such as the regeneration of coenzymes. APS for coenzyme regeneration can overcome the problem of high energy consumption in comparison to electrocatalytic methods. Microreactors represent a promising technology. Compared with the conventional system, it has the advantages of a large specific surface area, the fast diffusion of small molecules, and high efficiency. Introducing microreactors can lead to more efficient, economical, and environmentally friendly coenzyme regeneration in artificial photosynthesis. This review begins with a brief introduction of APS and microreactors, and then summarizes research on traditional electrocatalytic coenzyme regeneration, as well as photocatalytic and photo-electrocatalysis coenzyme regeneration by APS, all based on microreactors, and compares them with the corresponding conventional system. Finally, it looks forward to the promising prospects of this technology.

Organic Semiconducting Polymers for Augmenting Biosynthesis and Bioconversion

Solar-driven biosynthesis and bioconversion are essential for achieving sustainable resources and renewable energy. These processes harness solar energy to produce biomass, chemicals, and fuels. While they offer promising avenues, some challenges and limitations should be investigated and addressed for their improvement and widespread adoption. These include the low utilization of light energy, the inadequate selectivity of products, and the limited utilization of inorganic carbon/nitrogen sources. Organic semiconducting polymers offer a promising solution to these challenges by collaborating with natural microorganisms and developing artificial photosynthetic biohybrid systems. In this Perspective, we highlight the latest advancements in the use of appropriate organic semiconducting polymers to construct artificial photosynthetic biohybrid systems. We focus on how these systems can enhance the natural photosynthetic efficiency of photosynthetic organisms, create artificial photosynthesis capability of nonphotosynthetic organisms, and customize the value-added chemicals of photosynthetic synthesis. By examining the structure-activity relationships and emphasizing the mechanism of electron transfer based on organic semiconducting polymers in artificial photosynthetic biohybrid systems, we aim to shed light on the potential of this novel strategy for artificial photosynthetic biohybrid systems. Notably, these coupling strategies between organic semiconducting polymers and organisms during artificial photosynthetic biohybrid systems will pave the way for a more sustainable future with solar fuels and chemicals.

Conjugated Polymer Composite Nanoparticles Augmenting Photosynthesis-Based Light-Triggered Hydrogel Promotes Chronic Wound Healing

Diabetic chronic wounds are characterized by local hypoxia, impaired angiogenesis, and bacterial infection. In situ, self-supply of dissolved oxygen combined with the elimination of bacteria is urgent and challenging for chronic nonhealing wound treatment. Herein, an oxygen-generating system named HA-L-NB/PFE@cp involving biological photosynthetic chloroplasts (cp)/conjugated polymer composite nanoparticles (PFE-1-NPs@cp) and light-triggered hyaluronic acid-based (HA-L-NB) hydrogel for promoting diabetic wound healing is introduced. Briefly, conjugated polymer nanoparticles (PFE-1-NPs) possess unique light harvesting ability, which accelerates the electron transport rates in photosystem II (PS II) by energy transfer, elevating photosynthesis beyond natural chloroplasts. The enhanced release of oxygen can greatly relieve hypoxia, promote cell migration, and favor antibacterial photodynamic therapy. Additionally, the injectable hydrogel precursors are employed as a carrier to deliver PFE-1-NPs@cp into the wound. Under light irradiation, they quickly form a gel by S-nitrosylation coupling reaction and in situ anchor on tissues through amine-aldehyde condensation. Both in vitro and in vivo assays demonstrate that the oxygen-generating system can simultaneously relieve wound hypoxia, eliminate bacteria, and promote cell migration, leading to the acceleration of wound healing. This study provides a facile approach to develop an enhanced oxygen self-sufficient system for promoting hypoxic tissue, especially diabetic wound healing.

Self-Powered Biohybrid Systems Based on Organic Materials for Sustainable Biosynthesis

Sustainable energy conversion and effective biosynthesis for value-added chemicals have attracted considerable attention, but most biosynthesis systems cannot work independently without external power. In this work, a self-powered biohybrid system based on organic materials is designed and constructed successfully by integrating electroactive microorganisms with electrochemical devices. Among them, the hybrid living materials based on S. oneidensis/poly[3-(3'-N,N,N-triethylamino-1'-propyloxy)-4-methyl-2,5-thiophene chloride] (PMNT) biofilms for microbial fuel cells played a crucial role in electrocatalytic biocurrent generation by using biowaste as the only energy source. Without any external power supplies, the self-powered biohybrid systems could generate, convert, and store electrical energy for effective photosynthetic regulation and sustained chemical production. This work provides a new strategy to combine comprehensive renewable energy production with chemical manufacturing without an external power source in the future.

A Broad Light-Harvesting Conjugated Oligoelectrolyte Enables Photocatalytic Nitrogen Fixation in a Bacterial Biohybrid

We report a rationally designed membrane-intercalating conjugated oligoelectrolyte (COE), namely COE-IC, which endows aerobic N2 -fixing bacteria Azotobacter vinelandii with a light-harvesting ability that enables photosynthetic ammonia production. COE-IC possesses an acceptor-donor-acceptor (A-D-A) type conjugated core, which promotes visible light absorption with a high molar extinction coefficient. Furthermore, COE-IC spontaneously associates with A. vinelandii to form a biohybrid in which the COE is intercalated within the lipid bilayer membrane. In the presence of L-ascorbate as a sacrificial electron donor, the resulting COE-IC/A. vinelandii biohybrid showed a 2.4-fold increase in light-driven ammonia production, as compared to the control. Photoinduced enhancement of bacterial biomass and production of L-amino acids is also observed. Introduction of isotopically enriched 15 N2 atmosphere led to the enrichment of 15 N-containing intracellular metabolites, consistent with the products being generated from atmospheric N2 .

Long afterglow particle enables spectral and temporal light management to boost photosynthetic efficiency

Herein, we develop a strategy of matched spectral and temporal light management to improve photosynthetic efficiency by co-assembling natural thylakoid membrane (TM) with artificial long afterglow particle (LAP). To be specific, LAP with excellent stability and biocompatibility possesses the capabilities of light conversion and storage, optically-matched with the absorption of TM. These favorable features permit LAP as an additional well-functioned light source of photosynthesis performed by TM. As a consequence, enhanced photosynthesis is achieved after co-assembly, compared with pure TM. Under light, the rates of electron transfer, oxygen yield and adenosine triphosphate (ATP) production in this biohybrid architecture are boosted owing to down-conversion fluorescence emission from LAP. Under dark, persistent phosphorescence emission in charged LAP facilitates continual photosynthesis of TM, while that of pure TM almost stops immediately. This proof-of-concept work opens a new route to augment the photosynthetic efficiency of green plants by utilizing precise light-managed materials.

Water-soluble conjugated polymers for bioelectronic systems

Bioelectronics is an interdisciplinary field of research that aims to establish a synergy between electronics and biology. Contributing to a deeper understanding of bioelectronic processes and the built bioelectronic systems, a variety of new phenomena, mechanisms and concepts have been derived in the field of biology, medicine, energy, artificial intelligence science, etc. Organic semiconductors can promote the applications of bioelectronics in improving original performance and creating new features for organisms due to their excellent photoelectric and electrical properties. Recently, water-soluble conjugated polymers (WSCPs) have been employed as a class of ideal interface materials to regulate bioelectronic processes between biological systems and electronic systems, relying on their satisfying ionic conductivity, water-solubility, good biocompatibility and the additional mechanical and electrical properties. In this review, we summarize the prominent contributions of WSCPs in the aspect of the regulation of bioelectronic processes and highlight the latest advances in WSCPs for bioelectronic applications, involving biosynthetic systems, photosynthetic systems, biophotovoltaic systems, and bioelectronic devices. The challenges and outlooks of WSCPs in designing high-performance bioelectronic systems are also discussed.

Recent advances in aggregation-induced emission materials for enhancing solar energy utilization

Aggregation-induced emission (AIE) materials possessing unique properties in both the solution state and the aggregate state in the aspects of absorption, photoluminescence and heat generation have been well-established for wide applications in the past two decades. In recent years, several emerging applications of AIE materials in solar energy utilization, including luminescent solar concentrators, photosynthesis augmentation and solar steam generation have been reported. This mini-review provides a concise summary of these AIE materials in these aspects.

Solar-powered multi-organism symbiont mimic system for beyond natural synthesis of polypeptides from CO2 and N2

Developing artificial symbionts beyond natural synthesis limitations would bring revolutionary contributions to agriculture, medicine, environment, etc. Here, we initiated a solar-driven multi-organism symbiont, which was assembled by the CO₂ fixation module of Synechocystis sp., N₂ fixation module of Rhodopseudomonas palustris, biofunctional polypeptides synthesis module of Bacillus licheniformis, and the electron transfer module of conductive cationic poly(fluorene-co-phenylene) derivative. The modular design broke the pathway to synthesize γ-polyglutamic acid (γ-PGA) using CO₂ and N₂, attributing to the artificially constructed direct interspecific substance and electron transfer. So, the intracellular ATP and NADPH were enhanced by 69 and 30%, respectively, and the produced γ-PGA was enhanced by 104%. The strategy was further extended to produce a commercial antibiotic of bacitracin A. These achievements improve the selectivity and yield of functional polypeptides with one click by CO₂ and N₂, and also provide an innovative strategy for creating photosynthetic systems on demand.

Soft Fiber Electronics Based on Semiconducting Polymer

Fibers, originating from nature and mastered by human, have woven their way throughout the entire history of human civilization. Recent developments in semiconducting polymer materials have further endowed fibers and textiles with various electronic functions, which are attractive in applications such as information interfacing, personalized medicine, and clean energy. Owing to their ability to be easily integrated into daily life, soft fiber electronics based on semiconducting polymers have gained popularity recently for wearable and implantable applications. Herein, we present a review of the previous and current progress in semiconducting polymer-based fiber electronics, particularly focusing on smart-wearable and implantable areas. First, we provide a brief overview of semiconducting polymers from the viewpoint of materials based on the basic concepts and functionality requirements of different devices. Then we analyze the existing applications and associated devices such as information interfaces, healthcare and medicine, and energy conversion and storage. The working principle and performance of semiconducting polymer-based fiber devices are summarized. Furthermore, we focus on the fabrication techniques of fiber devices. Based on the continuous fabrication of one-dimensional fiber and yarn, we introduce two- and three-dimensional fabric fabricating methods. Finally, we review challenges and relevant perspectives and potential solutions to address the related problems.

Enhancing the light reactions of photosynthesis: Strategies, controversies, and perspectives

Photosynthesis is central to life on Earth, employing sunlight, water, and carbon dioxide to produce chemical energy and oxygen. It is generally accepted that boosting its efficiency offers one promising way to increase crop yields under agronomically realistic conditions. Since the components, structure, and regulatory mechanisms of the light reactions of photosynthesis are well understood, concepts for enhancing the process have been suggested and partially tested. These approaches vary in complexity, from targeting single components to comprehensive redesign of the whole process on the scales from single cells or tissues to whole canopies. Attempts to enhance light utilization per leaf, by decreasing pigmentation, increasing levels of photosynthetic proteins, prolonging the lifespan of the photosynthetic machinery, or massive reconfiguration of the photosynthetic machinery and the incorporation of nanomaterials, are discussed in this review first. Secondly, strategies intended to optimize the acclimation of photosynthesis to changes in the environment are presented, including redesigning mechanisms to dissipate excess excitation energy (e.g., non-photochemical quenching) or reduction power (e.g., flavodiiron proteins). Moreover, schemes for improving acclimation, inspired by natural or laboratory-induced adaptation, are introduced. However, all these endeavors are still in an early exploratory phase and/or have not resulted in the desired outcome, largely because photosynthesis is embedded within large networks of closely interacting cellular and metabolic processes, which can vary among species and even cultivars. This explains why integrated, systems-wide approaches are required to achieve the breakthroughs required for effectively increasing crop yields.

Begonia-Inspired Slow Photon Effect of a Photonic Crystal for Augmenting Algae Photosynthesis

Plant photosynthesis is considered to be an environmentally friendly and effective measure for reducing carbon dioxide levels to meet the global objective of carbon neutrality. However, the light energy utilization of photosynthetic pigments is insufficient. Begonia pavonine (B. pavonina) with blue leaves exhibits a photosynthetic quantum yield 10% higher than those of other plants by virtue of their photonic crystal (PC) thylakoids. Inspired by this property, we prepared non-angle-dependent PC hydrogels and assembled them with algae Chlorella pyrenoidosa (C. pyre). The band edge of PC hydrogels matched the absorption peaks of C. pyre, and the resulting slow photon effect increased the interaction time between incident light and photosynthetic pigments, which in turn induced the expression of light-harvesting proteins and the synthesis of pigments, thereby improving the light energy utilization. Further, we introduced an artificial antenna into the assembly, which assisted the slow photon effect in increasing the oxygen evolution and carbon sequestration rate by more than 200%. This method avoids the photobleaching problems faced by methods of synthesizing artificial antenna pigments and the biosafety problems faced by genetically engineered methods of editing pigments or proteins.

Photodynamic Antimicrobial Therapy Based on Conjugated Polymers

Pathogenic microorganisms have been a serious threat to human life and have become a public health problem of global concern. However, in the actual treatment there is a lack of efficient antimicrobial strategies which do not easily develop drug resistance; this can lead to inaccurate drug treatment that worsens the infection and even threatens life. With the emergence of a variety of drug-resistant bacteria and fungi, photodynamic therapy has gradually become one of the most promising treatment methods for drug-resistant bacteria infection; this is because it is controllable, non-invasive, and not prone to cause the development of drug resistance. Organic conjugated polymers that possess high fluorescence intensity, a large molar extinction coefficient, excellent light stability, an adjustable energy band, easy modification, good biocompatibility, and the ability to photosensitize oxygen to produce reactive oxygen species have been widely used in the fields of solar cells, highly sensitive detection systems, biological imaging, and anti-cancer and anti-microbial treatment. Photodynamic therapy is non-invasive and has high temporal and spatial resolution and is a highly effective antimicrobial treatment that does not easily induce drug resistance; it has also stimulated the scientific research enthusiasm of researchers and has become a research hotspot in the antimicrobial field. In this review, the photodynamic antibacterial applications of conjugated polymers with different structure types are summarized, and their development directions are considered.

AIEgens in Solar Energy Utilization: Advances and Opportunities

Solar energy is the most abundant energy resource on earth. Unfortunately, only a very small portion of the solar radiation can be utilized by current light-harvesting materials, thus leading to the poor utilization efficiency of solar energy. In this regard, aggregation-induced emission luminogens (AIEgens) have demonstrated versatile properties that can enhance energy conversion and potentially revolutionize solar utilization systems. AIEgens with great processability can selectively absorb radiation across multiple spectral regions and transform solar energy into longer-wavelength light, heat, or alternative forms of energy. These processes can considerably enhance the solar energy utilization performance by either developing light-harvesting systems based on AIEgens or hybridizing modern light-harvesting systems with AIE technology. In this Perspective, based on material properties, we highlight different functions of AIEgens related to solar light utilization, including sunlight transformation, chemical conversion, and thermal conversion.

Solar-Driven Producing of Value-Added Chemicals with Organic Semiconductor-Bacteria Biohybrid System

Photosynthetic biohybrid systems exhibit promising performance in biosynthesis; however, these systems can only produce a single metabolite and cannot further transform carbon sources into highly valuable chemical production. Herein, a photosynthetic biohybrid system integrating biological and chemical cascade synthesis was developed for solar-driven conversion of glucose to value-added chemicals. A new ternary cooperative biohybrid system, namely bacterial factory, was constructed by self-assembling of enzyme-modified light-harvesting donor-acceptor conjugated polymer nanoparticles (D-A CPNs) and genetically engineered Escherichia coli (E. coli). The D-A CPNs coating on E. coli could effectively generate electrons under light irradiation, which were transferred into E. coli to promote the 37% increment of threonine production by increasing the ratio of nicotinamide adenine dinucleotide phosphate (NADPH). Subsequently, the metabolized threonine was catalyzed by threonine deaminase covalently linking with D-A CPNs to obtain 2-oxobutyrate, which is an important precursor of drugs and chemicals. The 2-oxobutyrate yield under light irradiation is increased by 58% in comparison to that in dark. This work provides a new organic semiconductor-microorganism photosynthetic biohybrid system for biological and chemical cascade synthesis of highly valuable chemicals by taking advantage of renewable carbon sources and solar energy.