Pyrochlores for Advanced Oxygen Electrocatalysis

Defect Engineering in Composition and Valence Band Center of Y2(YxRu1-x)2O7-δ Pyrochlore Electrocatalysts for Oxygen Evolution Reaction

Oxygen evolution reaction (OER) takes place in various types of electrochemical devices that are pivotal for the conversion and storage of renewable energy. This paper describes a strategy in the design of solid-state structures of OER electrocatalysts through controlling the cation substitution on the active metal site and consequently valence band center position of site-mixed Y2(YxRu1-x)2O7-δ pyrochlore to achieve high catalytic activity. We found that partially replacing the B-site Ru4+ cation with A-site Y3+ in pyrochlore-structured Y2Ru2O7-δ modifies the oxidation state of B-site Ru from 4+ to 5+, as observed by electron paramagnetic resonance (EPR) spectroscopy but does not continuously increase the oxygen vacancy concentration in these oxygen substoichiometric compositions, as quantified by thermogravimetric analysis (TGA) decomposition studies. We found the increased Ru oxidation state leads to a downshift in valence band center. X-ray photoelectron spectroscopy (XPS) analysis was performed to quantitatively determine the optimal band center to be ∼1.27 eV below the Fermi energy level based on the analysis of the valence band edge of these Ru-based Y2(YxRu1-x)2O7-δ OER electrocatalysts. This work highlights that defect engineering can be a practical, effective approach to the optimization of oxidation state and electronic band center for high OER catalytic performance in a quantitative manner.

Promotion of Acid-Water Oxidation by Lattice Distortion and Orbital Hybridization Induced by Ionic Dopant in Pyrochlore Y2Ru2O7

For acid-water oxidation, pyrochloric ruthenates are thought to be extremely effective electrocatalysts. In this work, through partial B-site replacement with larger M2+ cations, the electronic states of Y2Ru2O7 with strong electron correlations are reasonably managed, by which the inherent performance is tremendously promoted. Based on this, the improved Y2Ru1.9Sr0.1O7 electrocatalyst exhibits an outstanding durability and presents a highly inherent mass activity of 1915.1 A gRu-1 (at 1.53 V vs RHE). The enhanced oxygen-evolving reaction (OER) activity by ionic dopant in YRO pyrochlore can be attributed to two aspects, i.e., the lattice distortion induced inhibition of the grain coarsening, which results in a large surface area for YRO-M and increases the OER active sites, and the weakening of electron correlation via broadening of the Ru 4d bandwidths due to the increase of the average radius of B-site ions, which gives rise to an enhancement of conductivity and a strengthened hybridization between Ru 4d and O 2p orbitals and improves the reaction kinetics. The synergistic effects of lattice distortion and orbital hybridization promote the enhanced OER activity. The results would provide fresh concepts for the design of improved electrocatalysts and underscore the significance of managing the intrinsic performance through the dual modification of microstructure morphology and electronic structure.

The Promising Seesaw Relationship Between Activity and Stability of Ru-Based Electrocatalysts for Acid Oxygen Evolution and Proton Exchange Membrane Water Electrolysis

The development of electrocatalysts that are not reliant on iridium for efficient acid-oxygen evolution is a critical step towards the proton exchange membrane water electrolysis (PEMWE) and green hydrogen industry. Ruthenium-based electrocatalysts have garnered widespread attention due to their remarkable catalytic activity and lower commercial price. However, the challenge lies in balancing the seesaw relationship between activity and stability of these electrocatalysts during the acid-oxygen evolution reaction (OER). This review delves into the progress made in Ru-based electrocatalysts with regards to acid OER and PEMWE applications. It highlights the significance of customizing the acidic OER mechanism of Ru-based electrocatalysts through the coordination of adsorption evolution mechanism (AEM) and lattice oxygen oxidation mechanism (LOM) to attain the ideal activity and stability relationship. The promising tradeoffs between the activity and stability of different Ru-based electrocatalysts, including Ru metals and alloys, Ru single-atomic materials, Ru oxides, and derived complexes, and Ru-based heterojunctions, as well as their applicability to PEMWE systems, are discussed in detail. Furthermore, this paper offers insights on in situ control of Ru active sites, dynamic catalytic mechanism, and commercial application of PEMWE. Based on three-way relationship between cost, activity, and stability, the perspectives and development are provided.

Progress in Anode Stability Improvement for Seawater Electrolysis to Produce Hydrogen

Seawater electrolysis for hydrogen production is a sustainable and economical approach that can mitigate the energy crisis and global warming issues. Although various catalysts/electrodes with excellent activities have been developed for high-efficiency seawater electrolysis, their unsatisfactory durability, especially for anodes, severely impedes their industrial applications. In this review, attention is paid to the factors that affect the stability of anodes and the corresponding strategies for designing catalytic materials to prolong the anode's lifetime. In addition, two important aspects-electrolyte optimization and electrolyzer design-with respect to anode stability improvement are summarized. Furthermore, several methods for rapid stability assessment are proposed for the fast screening of both highly active and stable catalysts/electrodes. Finally, perspectives on future investigations aimed at improving the stability of seawater electrolysis systems are outlined.

A homogeneous cobalt complex mediated electro and photocatalytic O2/H2O interconversion in neutral water

The O2/H2O redox couple is vital in various renewable energy conversion strategies. This work delves into the Co(L-histidine)2 complex, a functional mimic of oxygen-carrying metalloproteins, and its electrochemical behavior driving the bidirectional oxygen reduction (ORR) and oxygen evolution (OER) activity in neutral water. This complex electrocatalyzes O2 via two distinct pathways: a two-electron O2/H2O2 reduction (catalytic rate = 250 s-1) and a four-electron O2 to H2O production (catalytic rate = 66 s-1). The formation of the key trans-μ-1,2-Co(III)-peroxo intermediate expedites this process. Additionally, this complex effectively oxidizes water to O2 (catalytic rate = 15606 s-1) at anodic potentials via a Co(IV)-oxo species. Additionally, this complex executes the ORR and OER under photocatalytic conditions in neutral water in the presence of appropriate photosensitizer (Eosin-Y) and redox mediators (triethanolamine/ORR and Na2S2O8/OER) at an appreciable rate. These results highlight one of the early examples of both electro- and photoactive bidirectional ORR/OER catalysts operational in neutral water.

Modulating the electronic structures of cobalt-organic frameworks for efficient electrocatalytic oxygen evolution

The oxygen evolution reaction (OER) is a key process in various energy storage/generation technologies. Tuning the electronic structures of catalysts is an effective approach to improve the catalyst's activity. In this work, we synthesized Ce-doped cobalt-organic frameworks with benzene-1, 4-dicarboxylic acid (BDC) as the ligand as efficient OER electrocatalysts (denoted as Co3Ce1 BDC) with excellent stability and improved catalytic performance. The introduced Ce in Co3Ce1 BDC changes the surface configuration and tunes electronic structures of the active Co site, leading to enhanced interaction between intermediates and catalysts. Besides, the specific surface area, reaction kinetics, charge transfer efficiency, and turnover frequency are also improved in the presence of Ce. As a result, the Co3Ce1 BDC demonstrated excellent performance with a low overpotential of 285 mV at a current of 10 mA·cm-2, a preferable Tafel slope of 56.1 mV·dec-1, and an excellent durability in 1 M KOH, indicating the potential for practical applications in water splitting and other energy storage technologies wherein the OER plays a critical role. Comprehensive theoretical calculations and modeling further identified the key role of Ce in modulating the electronic structure and OER activity of cobalt-organic frameworks. Most importantly, this work provides a new strategy to the development of efficient cobalt-organic framework catalysts in OER-related applications.

Acid Etching Strategy: Optimizing Bifunctional Activities of Metal/Nitrogen-doped Carbon Catalysts for Efficient Rechargeable Zn-Air Batteries

Transition metal-embedded heteroatom carbon composites are regarded as an important branch of bifunctional catalysts for rechargeable Zn-air batteries. The inevitable transition metal particles on the carbon skeleton may affect the availability of the metal-heteroatom-carbon catalytic site. Herein, we propose an acid treatment strategy to remove the bare transition metal particles, thus regulating the electrochemical surface area. The OER activities are highly related to the electrochemical surface area for the catalysts with different acid treatment times. In addition, there exists an optimal acid treatment time to achieve the highest ORR and OER activities with the ΔE value of 0.75 V. Given the superior bifunctional activities after acid treatment, we further assemble the rechargeable Zn-air batteries with the optimal catalyst, which achieves a peak power density of 364 mW cm-2 and long cycling life of 500 h at 10 mA cm-2 . This work affords an efficient strategy to enhance the ORR/OER activities and may guide the design of transition metal/heteroatom carbon composites.

Atomically dispersed Ni activates adjacent Ce sites for enhanced electrocatalytic oxygen evolution activity

Manipulating the intrinsic activity of heterogeneous catalysts at the atomic level is an effective strategy to improve the electrocatalytic performances but remains challenging. Here, atomically dispersed Ni anchored on CeO₂ particles entrenched on peanut-shaped hollow nitrogen-doped carbon structures (a-Ni/CeO₂@NC) is rationally designed and synthesized. The as-prepared a-Ni/CeO₂@NC catalyst exhibits substantially boosted intrinsic activity and greatly reduced overpotential for the electrocatalytic oxygen evolution reaction. Experimental and theoretical results demonstrate that the decoration of isolated Ni species over the CeO₂ induces electronic coupling and redistribution, thus resulting in the activation of the adjacent Ce sites around Ni atoms and greatly accelerated oxygen evolution kinetics. This work provides a promising strategy to explore the electronic regulation and intrinsic activity improvement at the atomic level, thereby improving the electrocatalytic activity.