Helix-Induced Asymmetric Self-Assembly of π-Conjugated Block Copolymers: From Controlled Syntheses to Distinct Properties

Odd-even effect in chiral side-chain cyanobiphenyl block copolymer assemblies prepared by polymerization-induced chiral self-assembly

The precise control of the chirality of polymer assemblies is a challenge faced by scientists and has received significant attention in recent years. In this study, we employed the polymerization-induced chiral self-assembly (PICSA) method to create chiral side-chain cyanobiphenyl (CB) block copolymer (BCP) assemblies. The flexible spacers in chiral CB monomers were regulated to exhibit two distinct odd-even effects in the supramolecular asymmetrical arrangement of the CB mesogens inside BCP assemblies. The research results indicated that the liquid crystalline properties of CB mesogens significantly influence the magnitude and sign of their chiroptical properties. These findings have significant implications for the design of polymer assemblies with designable chiroptical functions.

Optically active poly(diphenylacetylene)s showing solvent-dependent helix inversion accompanied by modulation of helix inversion barriers

Symmetrically substituted poly(diphenylacetylene)s bearing optically active 2-octyloxycarbonyl groups at the para-positions of the pendant phenyl rings not only show a unique solvent-dependent helix inversion to afford diastereomeric right- and left-handed helical polymers but also significant unprecedented solvent-dependent changes in the helix inversion barrier of the polymer backbone resulting in switching between static or dynamic behavior of the helical polymers at approximately room temperature depending on the solvents used.

Size Control of Chiral Nanospheres Obtained via Nanoprecipitation of Helical Poly(phenylacetylene)s in the Absence of Surfactants

Nanostructuration of dynamic helical polymers such as poly(phenylacetylene)s (PPAs) depends on the secondary structure adopted by the polymer and the functional group used to connect the chiral pendant to the PPA backbone. Thus, while PPAs with dynamic and flexible scaffolds (para- and meta-substituted, ω1<165°) generate by nanoprecipitation low polydisperse nanospheres with controllable size at different acetone/water mixtures, those with a quasi-static behavior and the presence of an extended, almost planar structure (ortho-substituted, ω1>165°), aggregate into a mixture of spherical and oval nanostructures whose size is not controlled. Photostability studies show that poly(phenylacetylene) particles are more stable to light irradiation than when dissolved macromolecularly. Moreover, the photostability of the particle depends on the secondary structure of the PPA and its screw sense excess. This fact, in combination with the encapsulation ability of these polymer particles, allows the creation of light stimuli-responsive nanocarriers, whose cargo can be delivered by light irradiation.

Hierarchical assembly of thermoresponsive helical dendronized poly(phenylacetylene)s through photo-crosslinking of the thermal aggregates

Supramolecular assembly of helical homopolymers to form stable chiral entities in water is highly valuable for creating chiral nanostructures and fabricating chiral biomaterials. Here we report on thermally induced supramolecular assembly of helical dendronized poly(phenylacetylene)s (PPAs) in aqueous solutions, and their in-situ photo-crosslinking at elevated temperatures to afford crosslinked nano-assemblies with hierarchical structures and stabilized helicities. These helical dendronized homopolymers carry cinnamate-cored dendritic oligoethylene glycol (OEG) pendants, which exhibit characteristic thermoresponsive behavior. Their thermal aggregation confers hexagonal packing of the polymer chains, and simultaneously resulting in enhancement of their chiralities. Assisted by radial amphiphilicity and worm-like molecular geometry, these dendronized PPAs form supramolecular twisted fibers, spheroid particles or toroids via thermal aggregation. Through UV photoirradiation above their cloud points (Tcps), cycloaddition of cinnamate moieties from the dendritic pendants promotes intermolecular crosslinking of dendronized PPA chains within the thermal aggregates, and simultaneously, the dynamic morphologies and supramolecular chirality from the dendronized PPAs through thermally induced aggregation can be fixed. In addition, photo-crosslinking can be occurred solely within individual aggregates due to the protection of densely packed dendritic OEGs. Therefore, various crosslinked assemblies from the dendronized homopolymers with tailorable morphologies and stabilized chirality are fabricated by tuning their thermally induced dynamic aggregations followed by in-situ photo-crosslinking. We believe that this work paves a convenient route to fabricate chiral assemblies with stabilized morphologies and fixed chiralities from dynamic helical homopolymers through intermolecular crosslinking, which can be promising for various chiral applications.

Precise Construction of Chiral Plasmonic Nanoparticles for Enantioselective Discrimination

Chiral plasmonic nanostructures exhibit potential in the advanced manufacturing industry, due to their fascinating characteristics. However, the limitation of existing fabrication methods as difficulty to precisely manipulate chiral nanostructures at the nanoscale restricts their application and optimization of performance. In this work, we report a simple and robust route for the precise construction of chiral Au nanoparticles (NPs), employing star-like block copolymers with well-defined structures as chiral templates. The globular unimolecular micelles as nanoreactors enabled control over the size, shape, and chirality of in situ grown nanocrystals. Utilizing the chiral anisotropy property of surface-enhanced Raman scattering (SERS), the enantioselective discrimination on various substrates was accomplished with an enhancement factor over 9.3 × 106. NPs with a smaller size exhibited strengthened Raman enhancement and chiral recognition. Furthermore, these chiral unimolecular-micelle-based templates with high efficiency and strong controllability could pave the way for tailor-made chiral nanomaterials.

Enhanced Antibacterial Activity of Vancomycin Loaded on Functionalized Polyketones

Today, polymeric drug delivery systems (DDS) appear as an interesting solution against bacterial resistance, having great advantages such as low toxicity, biocompatibility, and biodegradability. In this work, two polyketones (PK) have been post-functionalized with sodium taurinate (PKT) or potassium sulfanilate (PKSK) and employed as carriers for Vancomycin against bacterial infections. Modified PKs were easily prepared by the Paal-Knorr reaction and loaded with Vancomycin at a variable pH. All polymers were characterized by FT-IR, DSC, TGA, SEM, and elemental analysis. Antimicrobial activity was tested against Gram-positive Staphylococcus aureus ATCC 25923 and correlated to the different pHs used for its loading (between 2.3 and 8.8). In particular, the minimum inhibitory concentrations achieved with PKT and PKSK loaded with Vancomycin were similar, at 0.23 μg/mL and 0.24 μg/mL, respectively, i.e., six times lower than that with Vancomycin alone. The use of post-functionalized aliphatic polyketones has thus been demonstrated to be a promising way to obtain very efficient polymeric DDS.

Supramolecular Polymer Frameworks with Controlled and Uniform Pore Apertures

Porous frameworks with controlled pore structure and tunable aperture are greatly demanded. However, precise synthesis of this kind of materials is a formidable challenge. Herein, we report the fabrication of two-dimensional (2D) supramolecular polymer frameworks using a precisely synthesized rod-like helical polyisocyanide as link. Four three-arm star-shaped polyisocyanides with the degree of the polymerization of 10, 20, 30 and 40, and having 2-ureido-4[1H]-pyrimidinone (UPy) terminals were synthesized. 2D-Crystalline polymer frameworks with apertures of 5.3, 10.1, 13.9, and 19.1 nm were respectively obtained through intermolecular hydrogen bonding interaction between the terminal Upy units. The pore aperture is dependent on the length of polyisocyanide backbone. Thus, well-defined supramolecular polymer frameworks with controlled and uniform hexagonal pores were obtained, as proved by small-angle X-ray scattering (synchrotron radiation facility), atomic force microscopy, and Brunauer-Emmett-Teller analyses. The frameworks with uniform large pore aperture were used to purify nanomaterials and immobilize biomacromolecules. For instance, the membranes of the polymer frameworks could size-fractionation of silver nanoparticles into uniform nanoparticles with very low dispersity. The frameworks with large aperture facilitated the inclusion of myoglobin and enhanced the stability and catalytic activity.

Biomimetic Chiral Nanomaterials with Selective Catalysis Activity

Chiral nanomaterials with unique chiral configurations and biocompatible ligands have been booming over the past decade for their interesting chiroptical effect, unique catalytical activity, and related bioapplications. The catalytic activity and selectivity of chiral nanomaterials have emerged as important topics, that can be potentially controlled and optimized by the rational biochemical design of nanomaterials. In this review, chiral nanomaterials synthesis, composition, and catalytic performances of different biohybrid chiral nanomaterials are discussed. The construction of chiral nanomaterials with multiscale chiral geometries along with the underlying principles for enhancing chiroptical responses are highlighted. Various biochemical approaches to regulate the selectivity and catalytic activity of chiral nanomaterials for biocatalysis are also summarized. Furthermore, attention is paid to specific chiral ligands, materials compositions, structure characteristics, and so on for introducing selective catalytic activities of representative chiral nanomaterials, with emphasis on substrates including small molecules, biological macromolecule, and in-site catalysis in living systems. Promising progress has also been emphasized in chiral nanomaterials featuring structural versatility and improved chiral responses that gave rise to unprecedented chances to utilize light for biocatalytic applications. In summary, the challenges, future trends, and prospects associated with chiral nanomaterials for catalysis are comprehensively proposed.

Homochiral π-Rich Covalent Organic Frameworks Enabled Chirality Imprinting in Conjugated Polymers: Confined Polymerization and Chiral Memory from Scratch

Optically active π-conjugated polymers (OACPs) have garnered increasing research interest for their resemblance to biological helices and intriguing chirality-related functions. Traditional methods for synthesizing involve decorating achiral conjugated polymer architectures with enantiopure side substituents through complex organic synthesis. Here, we report a new approach: the templated synthesis of unsubstituted OACPs via supramolecularly confined polymerizations of achiral monomers within nanopores of 2D or 3D chiral covalent organic frameworks (CCOFs). We show that the chiral π-rich nanospaces facilitate the in situ enantiospecific polymerization and self-propagation, akin to nonenzymatic polymerase chain reaction (PCR) system, resulting in chiral imprinting. The stacked polymer chains are kinetically inert enough to memorize the chiral information after liberating from CCOFs, and even after treatment at temperature up to 200 °C. The isolated OACPs demonstrate robust enantiodiscrimination, achieving up to 85 % ee in separating racemic amino acids. This underscores the potential of utilizing CCOFs as templates for supramolecularly imprinting optical activity into CPs, paving the way for synthetic evolution and advanced functional exploration of OACPs.

Amplified Circularly Polarized Luminescence Behavior in Chiral Co-assembled Liquid Crystal Polymer Films via the Strategic Manipulation of Chiral Inducers

One of the most important factors for the future application of circularly polarized luminescence (CPL) materials is their high dissymmetry factors (gem), and more and more studies are working tirelessly to focus on increasing the gem value. Herein, we chose an achiral liquid crystal polymer (LC-P) and two chiral binaphthyl-based inducers (R/S-3 and R/S-6) with different substitution positions (3,3' positions for R/S-3 and 6,6' positions for R/S-6) to construct chiral co-assemblies and explored their induced amplification CPL behaviors. Interestingly, after the thermal annealing treatment, this kind of chiral co-assembly (R/S-3)0.05-(LC-P)0.95 can emit a superior CPL signal (|gem| = 0.31 and λem = 424 nm), which achieves about 13-fold signal amplification in the spin-coated film, compared to (R/S-6)0.1-(LC-P)0.9 (|gem| = 0.023 and λem = 424 nm). This is because (R/S-3)0.05-(LC-P)0.95 could further co-assemble to form a more ordered arrangement LC state and generate regular helix nanofibers than that of (R/S-6)0.1-(LC-P)0.9. This work provides an efficient method for synthesizing high-quality CPL-active materials through the strategic manipulation of the structure of chiral binaphthyl-based inducers in chiral co-assembled LCP systems.

Photoisomerization and thermal reconstruction induced supramolecular chirality inversion in nanofiber determined by minority isomer

Here, amphiphile GCH based on glutamide-cyanostilbene is designed and synthesized, it is found that it can assembly in acetonitrile, and shows circular dichroism signals. After Z-E isomerizaition by UV irradiation, the CD signal of the assembly can be inverted. Unexpectedly, after another heating and cooling process, the circular dichroism signals can be totally inverted even though the E-isomers are in minority. Finally, the molecular dynamics (MD) simulations deeply elucidate the supramolecuar chirality inversion mechanism. This work brings some new insights into the control of chirality inversion, which may provide a perspective for the smart chiroptical materials construction.

"Matching Rule" for Generation, Modulation and Amplification of Circularly Polarized Luminescence

ConspectusCircularly polarized luminescence (CPL) generated by chiral luminescent systems has sparked enormous attention in multidisciplinary field as it brings infinite potential for applications, such as 3D optical displays, biological probes, and chiroptical sensors. Satisfying both the conditions of chirality and luminescence (including fluorescence or phosphorescence) is a prerequisite for constructing CPL materials. In this regard, whether in organic, inorganic, or hybrid systems, chiral and luminescent components generally involve effective coupling through covalent or noncovalent bonds. For covalent interactions, such as the copolymerization of chiral and luminescent monomers, although covalent bonds provide high stability for the system, they inevitably involve tedious preparation procedures that connect chirality and luminescence together. For noncovalent bonds, take supramolecular assembly as an example, chiral elements and achiral light-emitting units are chiral transferred through intermolecular interactions, and their advantages include the diversity of luminescent and chiral building blocks, the stimuli responsiveness brought by noncovalent bonds, as well as the potential amplification of CPL signals by coassembly. However, the stability of the assembly system may be poor, and the assembly chiroptical performance and morphology are difficult to predict. Gratifyingly, matching rule that do not rely on covalent together with noncovalent interactions allows for the effortless construction, modulation, as well as amplification of CPL systems.In this Account, we overview different strategies based on matching rule, including fluorescence-selective absorption, circularly polarized reflection, and circularly polarized fluorescence energy transfer (CPF-ET). Examples of these strategies are illustrated with a focus on helical polymers in light of their appealing structures and wide uses. For instance, for fluorescence-selective absorption, chiral helical polymers can convert racemic fluorescence light into a circularly polarized one with specific handedness by simply overlapping the helical polymer's circular dichroism (CD) spectra with the luminophore's emission spectra. For circularly polarized reflection, employing the selective reflection of certain handedness's circularly polarized light, the high helical twisting power (HTP) of the helical polymer in the cholesteric liquid crystals (N*-LCs) gives the system high glum. Additionally, for CPF-ET, only the emission spectrum of the donor and the absorption (or excitation) spectrum of the achiral acceptor are required to overlap, and no covalent or noncovalent interactions between the two are required. An outlook for the CPL materials related to matching rule which will avail the optimization and extension of this intriguing approach concludes the Account. We hope that the Account will offer insightful inspiration for the flourishing progress of chiroptical systems and present exciting opportunities.

Polymer Network Film with Double Reflection Bands Prepared Using a Thermochromic Cholesteric Liquid Crystal Mixture

Cholesteric liquid crystal polymer network (CLCN) films with a single reflection band have found applications for decoration and anticounterfeiting. The CLCN films with double reflection bands were more suitable for these applications. Herein, they were prepared by using thermochromic cholesteric liquid crystals (CLCs) through a two-step photopolymerization approach. At the first step, due to oxygen inhibition, the CLC monomers near the substrate surface were polymerized at a certain temperature. At the second step, those near the air were polymerized at another temperature. The wavelengths of these two reflection bands of the CLCN film were dominated by the two polymerization temperatures. Based on this approach, patterns with composite colors were prepared, which were suitably applied for decoration. Moreover, a double-layered CLCN film with a broad reflection band was prepared that could potentially be applied for displays.

Enabling robust blue circularly polarized organic afterglow through self-confining isolated chiral chromophore

Creating circularly polarized organic afterglow system with elevated triplet energy levels, suppressed non-radiative transitions, and effective chirality, which are three critical prerequisites for achieving blue circularly polarized afterglow, has posed a formidable challenge. Herein, a straightforward approach is unveiled to attain blue circularly polarized afterglow materials by covalently self-confining isolated chiral chromophore within polymer matrix. The formation of robust hydrogen bonds within the polymer matrix confers a distinctly isolated and stabilized molecular state of chiral chromophores, endowing a blue emission band at 414 nm, lifetime of 3.0 s, and luminescent dissymmetry factor of ~ 10-2. Utilizing the synergistic afterglow and chirality energy transfer, full-color circularly polarized afterglow systems are endowed by doping colorful fluorescent molecules into designed blue polymers, empowering versatile applications. This work paves the way for the streamlined design of blue circularly polarized afterglow materials, expanding the horizons of circularly polarized afterglow materials into various domains.

Construction of Supramolecular Polymers and Covalent Polymers via the Same Monomers

Nature owns the ability to construct structurally different polymers from the same monomers. While polymers can be classified as covalent polymers (CPs) and supramolecular polymers (SPs), it is still difficult to synthesize CPs and SPs using same monomers like nature do. Herein, M1 with two diazo salts on both the ends was designed. Additionally, hydroquinone was chosen to be M2 for the existence of two hydroxyl groups. When mixing at room temperature, M1 and M2 self-assembled to SPs via N…H hydrogen bonds. In another way, upon the exposure to ultraviolet irradiation when blending M1 with M2, CPs were fabricated in the presence of covalent bonds. The excellent thermal stability of CPs was determined by TGA and DSC, while the great corrosion resistance of covalent polymers was detected by acid or alkali immersion. In this way, constructing two kinds of polymers using the same monomers was successfully achieved. This shows tremendous potential in fields of polymer science, supramolecular chemistry, which would boom the development of polymers.

Helical Superstructures from the Hierarchical Self-Assembly of Coil-Coil Block Copolymer Guided by Side Chain Amyloid-β(17-19) LVF Peptide

The rational design of precisely controlled hierarchical chiral nanostructures from synthetic polymers garnered inspiration from sophisticated biological materials. Since chiral peptide motifs induce helix formation in macromolecules, herein we report the synthesis of a novel type of hybrid polymer consisting of a β-sheet forming a LVF [L = leucine, V = valine, and F = phenylalanine] tripeptide pendant polymethacrylate block and a poly[poly(ethylene glycol) methyl ether methacrylate] (PPEGMA) block. The designed block copolymer self-organized into helical superstructures with a left-handed twisting sense, as visualized by field emission scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. This intriguing hierarchical self-assembly is driven by the minimalistic peptide motif that itself has a high propensity to adopt an antiparallel β-sheet conformation. We also report the generation of a diverse array of nanostructures, including spherical micelles, spindle micelles, rod-like micelles, vesicles, helical supramolecular fibers, and helical toroids via self-assembly of the designed block copolymer in tetrahydrofuran/water mixed solvents. To realize the observable helical superstructure, a twisted two-dimensional core-shell tape is proposed as a structure model in which the peptide segments form an antiparallel β-sheet with a polymer shell. The findings contribute to the advancement of a helical polymer or the superhelical self-assembly of polymers, paving the way for diverse applications in materials science and related fields.

One-Pot Synthesis, Circularly Polarized Luminescence, and Controlled Self-Assembly of Janus-Type Miktoarm Star Copolymers

With the aim of broadening the scope of Janus-type polymers with new functionalities, Janus-type miktoarm star copolymers comprising helical poly(phenyl isocyanide) (PPI) and a vinyl polymer were designed and synthesized via a combination of Pd(II)-initiated isocyanide polymerization and atom transfer radical polymerization (ATRP). A functional β-cyclodextrin bearing 7 Pd(II) complexes at one side and 14 bromine groups at the other side ((Pd(II))7-CD-(Br)14) was prepared and used as an initiator for the one-pot polymerization of phenyl isocyanide and the ATRP of vinyl monomers in a living and controlled manner. A variety of Janus-type copolymers with different structures and tunable compositions were facilely obtained by using this method. Thus, Janus-type copolymers composed of helical PPIs and tetraphenylethylene-modified vinyl polymers exhibited a significant circularly polarized luminescence performance in both soluble and aggregated states. Meanwhile, Janus-type copolymers containing PPIs and hydrophilic vinyl polymers presented amphiphilicity and self-assembled into diverse morphologies.