Discrete Ligand Binding and Electron Transfer Properties of ba3-Cytochrome c Oxidase from Thermus thermophilus: Evolutionary Adaption to Low Oxygen and High Temperature Environments

Time-resolved serial crystallography to track the dynamics of carbon monoxide in the active site of cytochrome c oxidase

Cytochrome c oxidase (CcO) is part of the respiratory chain and contributes to the electrochemical membrane gradient in mitochondria as well as in many bacteria, as it uses the energy released in the reduction of oxygen to pump protons across an energy-transducing biological membrane. Here, we use time-resolved serial femtosecond crystallography to study the structural response of the active site upon flash photolysis of carbon monoxide (CO) from the reduced heme a3 of ba3-type CcO. In contrast with the aa3-type enzyme, our data show how CO is stabilized on CuB through interactions with a transiently ordered water molecule. These results offer a structural explanation for the extended lifetime of the CuB-CO complex in ba3-type CcO and, by extension, the extremely high oxygen affinity of the enzyme.

New insights into the proton pumping mechanism of ba3 cytochrome c oxidase: the functions of key residues and water

As the terminal oxidase of cell respiration in mitochondria and aerobic bacteria, the proton pumping mechanism of ba3-type cytochrome c oxidase (CcO) of Thermus thermophiles is still not fully understood. Especially, the functions of key residues which were considered as the possible proton loading sites (PLSs) above the catalytic center, as well as water located above and within the catalytic center, remain unclear. In this work, molecular dynamic simulations were performed on a set of designed mutants of key residues (Asp287, Asp372, His376, and Glu126II). The results showed that Asp287 may not be a PLS, but it could modulate the ability of the proton transfer pathway to transfer protons through its salt bridge with Arg225. Maintaining the closed state of the water pool above the catalytic center is necessary for the participation of inside water molecules in proton transfer. Water molecules inside the water pool can form hydrogen bond chains with PLS to facilitate proton transfer. Additional quantum cluster models of the Fe-Cu metal catalytic center are established, indicating that when the proton is transferred from Tyr237, it is more likely to reach the OCu atom directly through only one water molecule. This work provides a more profound understanding of the functions of important residues and specific water molecules in the proton pumping mechanism of CcO.

Beating Heart of Cytochrome c Oxidase: The Shared Proton of Heme a3 Propionates

Cytochrome c oxidase (CcO) pumps protons from the N-side to the P-side and consumes electrons from the P-side of the mitochondrial membrane driven by energy gained from reduction of dioxygen to water. ATP synthesis uses the resulting proton gradient and electrostatic potential difference. Since the distance a proton travels through CcO is too large for a one-step transfer process, proton-loading sites (PLS) that can carry protons transiently are necessary. One specific pump-active PLS couples to the redox reaction, thus energizing the proton to move across the membrane against electric potential and proton gradient. The PLS should also prevent proton backflow. Therefore, the propionates of the two redox-active hemes in CcO were suggested as PLS candidates although, according to CcO crystal structures, none of the four propionates can be protonated on account of strong H-bonds. Here, we show that modeling the local structure around heme a₃ propionates enhances significantly their capability of carrying a proton jointly. This was not possible for the propionates of heme a. The modeled structures are stable in molecular dynamics simulations (MDS) and are energetically similar to the crystal structure. Precise electrostatic energy computations of MDS data are used to estimate the pK_A values of all titratable residues in CcO. For the modeled structures, the heme a₃ propionates have pK_A values high enough to host a proton transiently but not too high to fix the proton permanently. The change in pK_A throughout the redox reaction is sufficient to push the proton to the P-side of the membrane and to provide the protons with the necessary amount of energy for ATP synthesis.

Screening and characterization of an α-L-fucosidase from Bacteroides fragilis NCTC9343 for synthesis of fucosyl-N-acetylglucosamine disaccharides

Fucosyl-N-acetylglucosamine disaccharides are present in many biologically important oligosaccharides, such as human milk oligosaccharides, Lewis carbohydrate antigens, and glycans on cell-surface glycoconjugate receptors, and thus have vast potential for infant formulas, prebiotics, and pharmaceutical applications. In this work, in order to screen biocatalysts for enzymatic synthesis of fucosyl-N-acetylglucosamine disaccharides, we performed sequence analysis of 12 putative and one known α-L-fucosidases of Bacteroides fragilis NCTC9343 and constructed a phylogenetic tree of the nine GH29 α-L-fucosidases. After that, five GH29A α-L-fucosidases were cloned, and four of them were successfully heterogeneous expressed and screened for transglycosylation activity, and a GH29A α-L-fucosidase (BF3242) that synthesized a mix of Fuc-α-1,3/1,6-GlcNAc disaccharides using pNPαFuc as donor and GlcNAc as acceptor was characterized. The effects of initial substrate concentration, pH, temperature, and reaction time on its transglycosylation activity were studied in detail. Under the optimum conditions of 0.05 U/mL enzyme, 20 mM pNPαFuc, and 500 mM GlcNAc in sodium buffer (pH 7.5) at 37 °C for 45 min, BF3242 efficiently synthesized Fuc-α-1,3/1,6-GlcNAc at a maximum yield of 79.0% with the ratio of 0.48 for 1,3/1,6. The molecular dynamics simulation analysis revealed that Loop-4 (His220-Ser245) in the putative 3D model of BF3242 displayed significant changes throughout the thermal simulations, might being responsible for the changes in the ratio of two regioisomeric products at different temperatures. This work provided not only a potential synthetic tool for enzymatic synthesis of fucosyl-N-acetylglucosamine disaccharides but also a possibility for the formation of regioisomeric products in glycosidase-catalyzed transglycosylation. KEY POINTS: • Sequence analysis of α-L-fucosidases of Bacteroides fragilis NCTC9343 • Obtainment of an α-L-fucosidase with high transglycosylation activity • Explanation why temperature affected the ratio of two regioisomeric products.

Probing the Proton-Loading Site of Cytochrome C Oxidase Using Time-Resolved Fourier Transform Infrared Spectroscopy

Crystal structure analyses at atomic resolution and FTIR spectroscopic studies of cytochrome c oxidase have yet not revealed protonation or deprotonation of key sites of proton transfer in a time-resolved mode. Here, a sensitive technique to detect protolytic transitions is employed. In this work, probing a proton-loading site of cytochrome c oxidase from Paracoccus denitrificans with time-resolved Fourier transform infrared spectroscopy is presented for the first time. For this purpose, variants with single-site mutations of N131V, D124N, and E278Q, the key residues in the D-channel, were studied. The reaction of mutated CcO enzymes with oxygen was monitored and analyzed. Seven infrared bands in the “fast” kinetic spectra were found based on the following three requirements: (1) they are present in the “fast” phases of N131V and D124N mutants, (2) they have reciprocal counterparts in the “slow” kinetic spectra in these mutants, and (3) they are absent in “fast” kinetic spectra of the E278Q mutant. Moreover, the double-difference spectra between the first two mutants and E278Q revealed more IR bands that may belong to the proton-loading site protolytic transitions. From these results, it is assumed that several polar residues and/or water molecule cluster(s) share a proton as a proton-loading site. This site can be propionate itself (holding only a fraction of H+), His403, and/or water cluster(s).

Infrared Difference Spectroscopy of Proteins: From Bands to Bonds

Infrared difference spectroscopy probes vibrational changes of proteins upon their perturbation. Compared with other spectroscopic methods, it stands out by its sensitivity to the protonation state, H-bonding, and the conformation of different groups in proteins, including the peptide backbone, amino acid side chains, internal water molecules, or cofactors. In particular, the detection of protonation and H-bonding changes in a time-resolved manner, not easily obtained by other techniques, is one of the most successful applications of IR difference spectroscopy. The present review deals with the use of perturbations designed to specifically change the protein between two (or more) functionally relevant states, a strategy often referred to as reaction-induced IR difference spectroscopy. In the first half of this contribution, I review the technique of reaction-induced IR difference spectroscopy of proteins, with special emphasis given to the preparation of suitable samples and their characterization, strategies for the perturbation of proteins, and methodologies for time-resolved measurements (from nanoseconds to minutes). The second half of this contribution focuses on the spectral interpretation. It starts by reviewing how changes in H-bonding, medium polarity, and vibrational coupling affect vibrational frequencies, intensities, and bandwidths. It is followed by band assignments, a crucial aspect mostly performed with the help of isotopic labeling and site-directed mutagenesis, and complemented by integration and interpretation of the results in the context of the studied protein, an aspect increasingly supported by spectral calculations. Selected examples from the literature, predominately but not exclusively from retinal proteins, are used to illustrate the topics covered in this review.

The Reactions of O2 and NO with Mixed-Valence ba3 Cytochrome c Oxidase from Thermus thermophilus

Earlier CO flow-flash experiments on the fully reduced Thermus thermophilus ba₃ (Tt ba₃) cytochrome oxidase revealed that O₂ binding was slowed down by a factor of 10 in the presence of CO (Szundi et al., 2010, PNAS 107, 21010-21015). The goal of the current study is to explore whether the long apparent lifetime (∼50 ms) of the Cu_B⁺-CO complex generated upon photolysis of the CO-bound mixed-valence Tt ba₃ (Koutsoupakis et al., 2019, Acc. Chem. Res. 52, 1380-1390) affects O₂ and NO binding and the ability of Cu_B to act as an electron donor during O-O bond splitting. The CO recombination, NO binding, and the reaction of mixed-valence Tt ba₃ with O₂ were investigated by time-resolved optical absorption spectroscopy using the CO flow-flash approach and photolabile O₂ and NO carriers. No electron backflow was detected after photolysis of the mixed-valence CO-bound Tt ba₃. The rate of O₂ and NO binding was two times slower than in the fully reduced enzyme in the presence of CO and 20 times slower than in the absence of CO. The purported long-lived Cu_B⁺-CO complex did not prevent O-O bond splitting and the resulting P_M formation, which was significantly faster (5-10 times) than in the bovine heart enzyme. We propose that O₂ binding to heme a₃ in Tt ba₃ causes CO to dissociate from Cu_B⁺ in a concerted manner through steric and/or electronic effects, thus allowing Cu_B⁺ to act as an electron donor in the mixed-valence enzyme. The significantly faster O₂ binding and O-O bond cleavage in Tt ba₃ compared to analogous steps in the aa₃ oxidases could reflect evolutionary adaptation of the enzyme to the microaerobic conditions of the T. thermophilus HB8 species.