Sensitivity-Tunable and Disposable Ion-Sensing Platform Based on Reverse Electrodialysis

Dual-Channel-Ion Conductor Membrane for Low-Energy Lithium Extraction

The development of energy-efficient and environmentally friendly lithium extraction techniques is essential to meet the growing global demand for lithium-ion batteries. In this work, a dual-channel ion conductor membrane was designed for a concentration-driven lithium-selective ion diffusion process. The membrane was based on a porous lithium-ion conductor, and its pores were modified with an anion-exchange polymer. Thus, the sintered lithium-ion conductors provided highly selective cation transport channels, and the functionalized nanopores with positive charges enabled the complementary permeation of anions to balance the transmembrane charges. As a result, the dual-channel membrane realized an ultrahigh Li+/Na+ selectivity of ∼1389 with a competitive Li+ flux of 21.6 mmol·m-2·h-1 in a diffusion process of the LiCl/NaCl binary solution, which was capable of further maintaining the high selectivity over 7 days of testing. Therefore, this work demonstrates the great potential of the dual-channel membrane design for high-performing lithium extraction from aqueous resources with low energy consumption and minimal environmental impact.

Harvesting Blue Energy Based on Salinity and Temperature Gradient: Challenges, Solutions, and Opportunities

Greenhouse gas emissions associated with power generation from fossil fuel combustion account for 25% of global emissions and, thus, contribute greatly to climate change. Renewable energy sources, like wind and solar, have reached a mature stage, with costs aligning with those of fossil fuel-derived power but suffer from the challenge of intermittency due to the variability of wind and sunlight. This study aims to explore the viability of salinity gradient power, or "blue energy", as a clean, renewable source of uninterrupted, base-load power generation. Harnessing the salinity gradient energy from river estuaries worldwide could meet a substantial portion of the global electricity demand (approximately 7%). Pressure retarded osmosis (PRO) and reverse electrodialysis (RED) are more prominent technologies for blue energy harvesting, whereas thermo-osmotic energy conversion (TOEC) is emerging with new promise. This review scrutinizes the obstacles encountered in developing osmotic power generation using membrane-based methods and presents potential solutions to overcome challenges in practical applications. While certain strategies have shown promise in addressing some of these obstacles, further research is still required to enhance the energy efficiency and feasibility of membrane-based processes, enabling their large-scale implementation in osmotic energy harvesting.

Au nanoparticle-hydrogel nanozyme-based colorimetric detection for on-site monitoring of mercury in river water

A sensitive on-site mercury sensing platform was developed for simple and effective monitoring of mercury levels in the field. The simple and practical mercury detection system was designed by integrating an Au nanoparticle-PEG hydrogel block nanozyme (Au-HBNz) into a polymer film-based colorimetric device. Upon addition of Hg²⁺ ions, Au-HBNz exhibited excellent peroxidase-like activity, catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine into a blue-colored product, which has a maximum absorbance at 652 nm. The resulting color intensity change was evaluated using a smartphone for simple and rapid Hg²⁺ detection with a broad detection range (0.008-20 μg∙mL^-1) and a linear concentration-response relationship (R² = 0.96). The detection limit (1.10 ng∙mL^-1) was lower than the maximum permissible Hg²⁺ levels in drinking water set by the World Health Organization (6 ng∙mL^-1) and U.S. Environmental Protection Agency (2 ng∙mL^-1). The recoveries of Hg²⁺ determination in river water by spiking Hg²⁺ samples ranged from 92 to 106%, which indicated high validity and applicability of the Hg²⁺ detection system for field measurements. Thus, the developed sensor enables highly selective and efficient real-time monitoring of Hg²⁺.

Two-dimensional nano-layered materials as multi-responsive chemosensors constructed by carbazole- and fluorene-based polyaniline-like derivatives

The development of multi-responsive chemosensors has a bright application prospect in environmental monitoring and biological diagnosis. In this paper, we report two kinds of fluorescent polyaniline-like derivatives containing of carbazole or fluorene moieties with two-dimensional (2D) nano-layered structure and their applications in the detection of Al³⁺, Fe³⁺, Cu²⁺ and HCl in different environments. Through the analysis of the structure and properties of these two 2D materials, we find that the prepared (Poly(9,9'-(9,9-dihexyl-9H-fluorene-2,7-diyl)bis(9H-carbazol-3-amine))) PDFCA material performs excellent sensing properties for above analytes. Relevant density functional theory (DFT) calculation further confirms the potential application of 2D nano-layered PDFCA material in sensing field. This study presents that 2D nano-layered PDFCA material is considerably competitive in the development of multi-responsive chemosensors, and it will greatly accelerate the research of 2D polymer materials.

Self-Powered Electrochromic Readout of Potentiometric pH Electrodes

An absorbance-based colorimetric sensor array that is self-powered by an ion-selective electrode (ISE) in a short-circuited cell is presented. As the cell voltage is maintained at zero, the potential at the ISE serves as the power generator to directly transfer its power to a potential-dependent Prussian blue (PB) film in contact with an electrolyte solution in a separate detection compartment. This allows one to activate the color change of the PB film without the need for an external power supply. The potential of the PB detection element is optimized to change color between 50 and 250 mV (vs Ag/AgCl). Because the potential originates at the ISE, it is proportional to the ion activity in the sample in agreement with the Nernst equation. In this way, a higher cation activity in the sample generates a more positive potential, which enhances the PB absorbance that serves as the analytical signal. A self-powered optical sensor array coupled to poly(vinyl-chloride)-based pH electrodes based on two different ionophores is utilized here as a model. The measuring range is tuned chemically by varying the pH of the inner filling solution of each ISE, giving a measuring range from pH 2 to 10.5. As the optical sensor is driven by a potentiometric probe, the sensor output is independent of solution ionic strength. It is successfully applied for quantitative analysis in unmodified turbid/colored samples that included red wine, coke, coffee, baking soda, and antacid. The colorimetric output correlates well with the reference method, a calibrated pH electrode. Compared to earlier systems where the cell potential is dictated by an external power source, the PB film exhibits excellent reproducibility and a rapid response time of about 44 s.

Optical Sensing with a Potentiometric Sensing Array by Prussian Blue Film Integrated Closed Bipolar Electrodes

The simultaneous optical readout of a potentiometric sensor array of ion-selective electrodes (ISEs) based on PVC membranes is described here for the first time. The optical array consists of electrochromic Prussian Blue (PB) films in multiple closed ion-selective bipolar electrodes (BPEs), which gives a physical separation between the optical detection and sample compartments. The potential-dependent turnover of PB generates Prussian White (PW). A near-Nernstian response of the PB film is confirmed by colorimetric absorbance experiments as a function of applied potential. In the combined bipolar electrode cell, the overall potential is kept constant with a single potentiostat over the entire array where each PB spot indicates the potential change of an individual connected potentiometric probe. For cation-selective electrodes, the absorbance or blue intensity of the connected PB film is enhanced with increasing target cation activity. The colorimetric absorbance changes are simultaneously followed by a digital camera and analyzed by Mathematica software. A multiple cation-BPE array allows one to achieve simultaneous quantitative analysis of potassium, sodium, and calcium ions, demonstrated here in highly colored fruit juices. Mass transport at the PB thin film is shown not to be rate-limiting. The measuring ranges can be tuned in a wide range by potential control. The PB film exhibits greatly improved reproducibility and stability as compared to previous work with a ferroin redox probe confined in a thin solution layer.