A Highly Selective Extraction Approach for Per- and Polyfluoroalkyl Substances Based on Protein Affinity

Characterization of Chemical Exposome in A Paired Human Preconception Pilot Study

Parental preconception exposure to synthetic chemicals may have critical influences on fertility and reproduction. Here, we present a robust LC-MS/MS method covering up to 95 diverse xenobiotics in human urine, serum, seminal and follicular fluids to support exposome-wide assessment in reproductive health outcomes. Extraction recoveries of validated analytes ranged from 62% to 137% and limits of quantification from 0.01 to 6.0 ng/mL in all biofluids. We applied the validated method to a preconception cohort of Australian couples (n = 30) receiving fertility treatment. In total, 36 and 38 xenobiotics were detected across the paired biofluids of males and females, respectively, including PFAS, parabens, organic UV-filters, plastic additives, antimicrobials, and other industrial chemicals. Results showed 39% of analytes in males and 37% in females were equally detected in paired serum, urine, and reproductive fluids. The first detection of the sunscreen ingredient avobenzone and the industrial chemical 4-nitrophenol in follicular and seminal fluids suggests they can cross both blood-follicle/testis barriers, indicating potential risks for fertility. Further, the blood-follicle transfer of perfluorobutanoic acid, PFOA, PFHxS, PFOS, and oxybenzone corroborate that serum concentrations can be reliable proxies for assessing exposure within the ovarian microenvironment. In conclusion, we observed significant preconception exposure to multiple endocrine disruptors in couples and identified potential xenobiotics relevant to male and female fertility impairments.

Spatial distribution, source, and fate of per- and polyfluoroalkyl substances in the surrounding environment of closed and converted fluorochemical factories in Fujian, China

Following the closure of perfluorooctanesulfonic acid (PFOS) production to comply with the Stockholm Convention regulations or restrictions, manufacturers have shifted to developing short-chain alternatives like perfluorobutane sulfonic acid (PFBS). However, limited research has been conducted to evaluate the impact of this transition on the surrounding environment. This study focused on the spatial distribution, source, and fate of 18 per- and polyfluoroalkyl substances (PFAS) in the surrounding environment of the closure and transformation of two PFAS manufacturing plants in Fujian, China. The total concentrations of PFAS in surface water, sediment, and fish were within the range of 48.9-72,400 ng/L, 0.930-57.6 ng/g dw, and 3.33-1245 ng/g dw, respectively. The predominant compounds were PFBS, PFOS, and perfluorooctanoic acid (PFOA) among the three matrices. Principal component analysis highlighted significant differences in PFAS profiles across different regions of the Futun River, suggesting diverse sources of PFAS. Source apportionment indicated that despite being closed or converted for almost three years, the two factories still significantly impacted the surrounding environment. The shutdown factory mainly released PFAS characterized by perfluoroalkyl sulfonic acids. In contrast, the PFAS were released from conversion plant with the fingerprint being PFBS and perfluoroalkyl carboxylic acids. The conversion of the factories has resulted in the coexistence of long-chain and short-chain PFAS, which has complicated the composition of PFAS in the environment. As sewage treatment plant could not effectively remove PFBS and perfluorobutanoic acid (PFBA) in wastewater, and due to their strong migration ability, these chemicals had a wider impact range, increasing the difficulty of environmental restoration and management. Risk assessment showed that PFAS downstream of the two factories posed high or moderate ecological risks. Specifically, PFBS, PFOS, and PFOA displayed the highest risk quotients and should be paid further attention.

All-in-one strategy to construct bifunctional covalent triazine-based frameworks for simultaneous extraction of per- and polyfluoroalkyl substances and polychlorinated naphthalenes in foods

Per- and polyfluoroalkyl substances (PFASs) and polychlorinated naphthalenes (PCNs) are of growing concern due to their toxic effects on the environment and human health. There is an urgent need for strategies to monitor and analyze the coexistence of PFASs and PCNs, especially in food samples at trace levels, to ensure food safety. Herein, a novel β-cyclodextrin (β-CD) derived fluoro-functionalized covalent triazine-based frameworks named CD-F-CTF was firstly synthesized. This innovative framework effectively combines the porous nature of the covalent organic framework and the host-guest recognition property of β-CD enabling the simultaneous extraction of PFASs and PCNs. Under the optimal conditions, a simple and rapid method was developed to analyze PFASs and PCNs by solid-phase extraction (SPE) based simultaneous extraction and stepwise elution (SESE) strategy for the first time. When coupled with liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) and gas chromatography-tandem mass spectrometry (GC-MS/MS), this method achieved impressive detection limits for PFASs (0.020 -0.023 ng/g) and PCNs (0.016 -0.075 ng/g). Furthermore, the excellent performance was validated in food samples with recoveries of 76.7-107 % (for PFASs) and 78.0-108 % (for PCNs). This work not only provides a simple and rapid technique for simultaneous monitoring of PFASs and PCNs in food and environmental samples, but also introduces a new idea for the designing novel adsorbents with multiple recognition sites.

Tracing the Bioaccessibility of Per- and Polyfluoroalkyl Substances in Fish during Cooking Treatment

The effect of cooking on the contents of per- and polyfluoroalkyl substances (PFAS) in foods has been widely studied, but whether cooking-induced structural and chemical modifications in foods affect the oral bioaccessibility of PFAS remains largely unknown. In this study, three kinds of fishes with different fat contents were selected, and the bioaccessibility of PFAS during cooking treatment (steaming and frying) was evaluated using in vitro gastrointestinal simulation with gastric lipase addition. The results showed that related to their molecular structures, the bioaccessibility of an individual PFAS varied greatly, ranging from 26.0 to 108.1%. Cooking can reduce the bioaccessibility of PFAS, and steaming is more effective than oil-frying; one of the possible reasons for this result is that the PFAS is trapped in protein aggregates after heat treatment. Fish lipids and cooking oil ingested with meals exert different effects on the bioaccessibility of PFAS, which may be related to the state of the ingested lipid/oil and the degree of unsaturation of fatty acids. Gastric lipase boosted the release of long-chain PFAS during in vitro digestion, indicating that the degree of lipolysis considerably influences the bioaccessibility of hydrophobic PFAS. Estimated weekly PFAS intakes were recalibrated using bioaccessibility data, enabling more accurate and reliable dietary exposure assessments.

Trends in the Analysis and Exploration of per- and Polyfluoroalkyl Substances (PFAS) in Environmental Matrices: A Review

Per- and polyfluoroalkyl substances (PFAS) is an emerging class of organic pollutants of concern and is now prevalent in environmental matrices including water, soil, air, and biological. So far, several standard analytical methods have been developed to systematically analyze PFAS in different environmental matrices. However, the complexity of environmental matrices makes the effective extraction of PFAS difficult, and the legacy PFAS is gradually changing into a new PFAS with short chain and unknown structure in production, which makes the analysis of PFAS challenging. In this review, the following aspects are summarized: (1) the advances in standard analytical methods for PFAS in different environmental matrices, and further generalizes the updating novel extraction and detection methods; (2) the analysis of unknown PFAS, the suspect and non-targeted screening analysis method of PFAS based on high-resolution mass spectrometry (HRMS) is systematically described.

Electrospun fluorinated carbon nanotubes/silk fibroin composite nanofibers for the analysis of perfluoroalkyl and polyfluoroalkyl substances

Assessment of the exposure risk of perfluoroalkyl and polyfluoroalkyl substances (PFASs) has been of public concern for many years. However, it is a challenging undertaking because of the trace levels of these contaminants in the environment and biological systems. In this work, fluorinated carbon nanotubes/silk fibroin (F-CNTs/SF) nanofibers were for the first time synthesized by electrospinning and evaluated as a new adsorbent in pipette tip-solid-phase extraction to enrich PFASs. The addition of F-CNTs increased the mechanical strength and toughness of the SF nanofibers, thus improving the durability of composite nanofibers. The proteophilicity of silk fibroin formed the basis of the good affinity of this material with PFASs. The adsorption behaviors of PFASs on the F-CNTs/SF were investigated by adsorption isotherm experiments to understand the mechanism of extraction. With analysis using ultrahigh performance liquid chromatography-Orbitrap high-resolution mass spectrometric, low limits of detection (0.006-0.090 μg L^-1) and enrichment factors of 13-48 were obtained. Meanwhile, the developed method was successfully applied to the detection of wastewater and human placenta samples. This work provides a new idea for the design of novel adsorbents with proteins integrated in polymer nanostructures, a potential routine and practical monitoring technique for PFASs in environmental and biological samples.

Interactions between Extracellular DNA and Perfluoroalkyl Acids (PFAAs) Decrease the Bioavailability of PFAAs in Pakchoi (Brassica chinensis L.)

Perfluoroalkyl acids (PFAAs) are emerging ionic organic pollutants worldwide. Great amounts of extracellular DNA (∼mg/kg) coexist with PFAAs in the environment. However, PFAA-DNA interactions and effects of such interactions have not been well studied. Herein, we used isothermal titration calorimetry (ITC), spectroscopy, and computational simulations to investigate the PFAA-DNA interactions. ITC assays showed that specific binding affinities of PFHxA-DNA, PFOA-DNA, PFNA-DNA, and PFOS-DNA were 5.14 × 10⁵, 3.29 × 10⁵, 1.99 × 10⁵, and 2.18 × 10⁴ L/mol, respectively, which were about 1-2 orders of magnitude stronger than those of PFAAs with human serum albumin. Spectral analysis suggested interactions of PFAAs with adenine (A), cytosine (C), guanine (G), and thymine (T), among which grooves associated with thymine were the major binding sites. Molecular dynamics simulations and quantum chemical calculations suggested that hydrogen bonds and van der Waals forces were the main interaction forces. Such a PFAA-DNA binding decreased the bioavailability of PFAAs in plant seedlings. The findings will help to improve the current understanding of the interaction between PFAAs and biomacromolecules, as well as how such interactions affect the bioavailability of PFAAs.

Preparation of cationic hierarchical porous covalent organic frameworks for rapid and effective enrichment of perfluorinated substances in dairy products

Perfluorinated substances (PFASs) are harmful pollutants that have environmental persistence and high bioaccumulation. Effective sample pretreatment must be performed to detect trace or even ultra-trace PFASs in actual samples because of their extremely low contents in complex samples. In this study, a cationic hierarchical porous covalent organic frameworks (C-H-COF) were customized via a template-assisted strategy using polystyrene spheres (PS) as sacrificial materials and a post-synthetic modification method. C-H-COF showed good adsorption selectivity for PFASs owing to the dual effects of the full utilization of the internal adsorption sites and electrostatic interaction. The key role of electrostatic attraction in the extraction of PFASs using C-H-COF was further proven by density functional theory (DFT) calculations. The maximum adsorption capacity of the C-H-COF for perfluorooctanoic acid (PFOA) was 400 mg·g⁻¹, which was superior to that of microporous COFs (M-COF) and hierarchical porous COFs without cationic functionalization (H-COF). Accordingly, an analytical method for sensitively detecting five PFASs was established by employing C-H-COF as a dispersive solid phase extraction (DSPE) adsorbent combined with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS), and the limits of detection were 0.011‒0.29 ng·L⁻¹. Moreover, the hierarchical porous structure of the C-H-COF accelerated the mass transfer of analytes so that the extraction process could be completed within 10 min. This method was employed to analyze PFASs in dairy products, in which the ultra-trace levels of analytes were quickly determined with spiked recoveries of 80.1‒112.6%. This work not only provides a rational synthetic strategy for novel ionic hierarchical porous COFs but also helps to expand the application of COFs in sample pretreatment.

Electrospun UiO-66-F4/polyacrylonitrile nanofibers for efficient extraction of perfluoroalkyl and polyfluoroalkyl substances in environmental media

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are a family of emerging contaminants which are widely present in environment. In this work, novel UiO-66-F₄/polyacrylonitrile (UiO-66-F₄/PAN) hybrid nanofibers were firstly prepared via blend electrospinning or in-situ growth method for the pipette-tip solid phase extraction of PFASs. Characterizations demonstrate the as-synthesized UiO-66-F₄/PAN nanofibers have good chemical and thermal stability, possess large surface area (248 m²/g) and mesoporous framework structure. Several extraction factors including the amount of adsorbent, pH and ionic strength of sample solution, extraction time and eluent were investigated and the optimum conditions are 20 mg of the selected sorbent, adjusting to pH 5 and adding 4% w/v NaCl to sample solution, extraction for 12 min (3 min × 4). The good adsorption affinity of UiO-66-F₄/PAN for PFASs can be attributed to the extensive adsorption sites and multiple interactions including hydrophobic interaction, hydrogen bonding and F-F interaction. Low limit of detection (0.008-0.076 µg/L), limit of quantification (0.010-0.163 µg/L) and recoveries (70.84-113.57%) for 9 PFASs with relative standard deviations < 15% were achieved. When applied in the analysis of target PFASs in lake water, tap water, beverage, and shrimp muscle samples, this method could achieve robust and accurate results with sufficient sensitivity for nine PFASs.

Dual-Functionalized MIL-101(Cr) for the Selective Enrichment and Ultrasensitive Analysis of Trace Per- and Poly-fluoroalkyl Substances

The presence of per- and poly-fluoroalkyl substances (PFASs) even at trace levels poses a potential threat to ecological safety and human health. PFASs often require an extraction pretreatment for enrichment before detection and analysis, which is still challenged by the relatively low efficiency because of the limited specific interactions involved. Here, we deliberately introduced multiple interactions into the solid-phase microextraction (SPME) process via a dual-functional modification of MIL-101(Cr), i.e., amination and subsequent fluorination, which is then used as an adsorbent for the efficient enrichment of PFASs. In combination with ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS), ultrasensitive quantitative analysis is available for nine selected PFASs with high linearities above 0.9941 in the ranges of 0.5-1500 ng/L, low limits of detection of 0.004-0.12 ng/L, satisfactory repeatability and reproducibility with a relative standard deviation (RSD) < 11.6%, as well as excellent performance in complicated real water samples (recovery ratio of 76.2-108.6%). This work represents a rational design of a solid extractant with the desired structure and functionality for the selective enrichment and analysis of PFASs at trace concentrations in real applications.