Input of an Off-Line, Comprehensive, Three-Dimensional Method (CPC×SFC/HRMS) to Quantify Polycyclic Aromatic Hydrocarbons in Vacuum Gas Oils

Online Supercritical Fluid Chromatography Hyphenated to Fourier Transform Ion Cyclotron Resonance Mass Spectrometry with Quadrupole Detection for Microalgae Bio-Oil Characterization

Microalgae are an attractive feedstock for biofuel production thanks to their renewable nature, high growth rate, and ability to use anthropogenic CO2. The conversion of microalgae by hydrothermal liquefaction (HTL) leads to a solid residue, a gaseous phase, and a biocrude. However, the bio-oil is rich in heteroatoms and requires upgrading processes to be used as biofuels. For these treatments to be effective, detailed knowledge of the sample is crucial. The bio-oil was characterized by direct introduction into a Fourier transform ion cyclotron resonance mass spectrometer (DI-FTICR MS) with an electrospray ionization source (ESI). Thousands of molecular formulas were assigned with a high level of confidence, mainly compounds with nitrogen and oxygen atoms. Additionally, the bio-oil was analyzed by coupling supercritical fluid chromatography (SFC) and FTICR to combine the separation power of SFC to the high performances of a 12 T FTICR. Quadrupole detection (2ω) was used in FTICR to have a high resolving power with a lower transient time. The coupling allowed the separation of many isomers along the chromatogram, showing the isomeric complexity of microalgae bio-oils. Moreover, classes of compounds were separated according to their heteroatom class thanks to the SFC separation. In this work, the advantages of DI-FTICR MS and SFC-FTICR MS proved complementary, and DI was useful to study the bio-oil at the molecular scale thanks to the high performances, while SFC proved useful for the characterization at the isomeric scale. This demonstrated the significant potential of this new online hyphenated technique for the characterization of complex matrices.

Analysis of vitamin D and its metabolites in biological samples - Part I: Optimization and comparison of UHPSFC-MS/MS and UHPLC-MS/MS methods

Fat-soluble vitamin D is an essential bioactive compound important for human health. Insufficient vitamin D levels can result not only in bone disease but also in other disorders, such as cancer, metabolic disorders, and diseases related to poor immune function. The current methods commonly used for vitamin D analysis are often applied to determine the levels of the most abundant metabolite in plasma, i.e., 25-OH-D2/D3. These methods do not consider the presence of other hydroxylated and esterified metabolites, including isomers and epimers, which are typically found in low concentrations. In this study, we developed a fast and selective ultra-high performance supercritical fluid chromatography (UHPSFC) method using a 150 mm long 1-amino anthracene (1-AA) column and a mobile phase consisting of carbon dioxide and methanol/isopropanol (1/1, v/v) mixed with 8 % water. After thorough optimization of column temperature and back pressure, the separation of four vitamin D3 esters, vitamin D3 and D2, and eight mono- and di-hydroxylated metabolites, including three groups of isomers, was achieved in 10 min. Two ion sources, atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization optimized within this study, were compared in tandem mass spectrometry (MS/MS) detection. No significant sensitivity differences were observed. Subsequently, the same 1-AA column chemistry was examined in ultra-high performance liquid chromatography (UHPLC) as the stationary phase that could hypothetically bring different selectivity in the separation of vitamin D and its metabolites. However, this hypothesis was rejected, and C18 was used as a stationary phase in the final optimized UHPLC-MS/MS method. Despite detailed optimization, the final 15 min UHPLC method was not able to separate di-hydroxylated isomers of vitamin D3, while it enabled better resolution of esterified forms compared to UHPSFC. Optimized methods provided similar repeatability of retention times and peak areas, with RSD < 2 % and 10 %, respectively. The lowest limits of quantification were in the range of 1.2 - 4.9 ng/mL for UHPSFC-APCI-MS/MS, while for UHPLC-APCI-MS/MS, they were typically in the range of 2.6 - 9.6 ng/mL. Based on the obtained results, the UHPSFC-APCI-MS/MS method was the most promising approach for fast, selective, and sensitive analysis that could be applied in the analysis of biological samples with emphasis on the separation of both hydroxylated and esterified metabolites, including isomeric forms.

GC-FTICR mass spectrometry with dopant assisted atmospheric pressure photoionization: application to the characterization of plastic pyrolysis oil

Pyrolysis is a promising way to convert plastic waste into valuable resources. However, for downstream upgrading processes, many undesirable species, such as conjugated diolefins or heteroatom-containing compounds, can be generated during this pyrolysis. In-depth chemical characterization is therefore required to improve conversion and valorization. Because of the high molecular diversity found in these samples, advanced analytical instrumentation is needed to provide accurate and complete characterization. Generally, direct infusion Fourier transform mass spectrometry is used to gather information at the molecular level, but it has the disadvantage of limited structural insights. To overcome this drawback, gas chromatography has been coupled to Fourier transform ion cyclotron resonance mass spectrometry. By taking advantage of soft atmospheric pressure photoionization, which preserves molecular information, and the use of different dopants (pyrrole, toluene, and benzene), selective ionization of different chemical families was achieved. Differences in the ionization energy of the dopants will only allow the ionization of the molecules of the pyrolysis oil which have lower ionization energy, or which are accessible via specific chemical ionization pathways. With a selective focus on hydrocarbon species and especially hydrocarbon species having a double bond equivalent (DBE) value of 2, pyrrole is prone to better ionize low-mass molecules with lower retention times compared to the dopant benzene, which allowed better ionization of high-mass molecules with higher retention times. The toluene dopant presented the advantage of ionizing both low and high mass molecules.

Next Challenges for the Comprehensive Molecular Characterization of Complex Organic Mixtures in the Field of Sustainable Energy

The conversion of lignocellulosic biomass by pyrolysis or hydrothermal liquefaction gives access to a wide variety of molecules that can be used as fuel or as building blocks in the chemical industry. For such purposes, it is necessary to obtain their detailed chemical composition to adapt the conversion process, including the upgrading steps. Petroleomics has emerged as an integral approach to cover a missing link in the investigation bio-oils and linked products. It relies on ultra-high-resolution mass spectrometry to attempt to unravel the contribution of many compounds in complex samples by a non-targeted approach. The most recent developments in petroleomics partially alter the discriminating nature of the non-targeted analyses. However, a peak referring to one chemical formula possibly hides a forest of isomeric compounds, which may present a large chemical diversity concerning the nature of the chemical functions. This identification of chemical functions is essential in the context of the upgrading of bio-oils. The latest developments dedicated to this analytical challenge will be reviewed and discussed, particularly by integrating ion source features and incorporating new steps in the analytical workflow. The representativeness of the data obtained by the petroleomic approach is still an important issue.

An off-line three-dimensional liquid chromatography/Q-Orbitrap mass spectrometry approach enabling the discovery of 1561 potentially unknown ginsenosides from the flower buds of Panax ginseng, Panax quinquefolius and Panax notoginseng

To comprehensively elucidate the herbal metabolites is crucial in natural products research to discover new lead compounds. Ginsenosides are an important class of bioactive components from the Panax plants exerting the significant tonifying effects. However, to identify new ginsenosides by the conventional strategies trends to be more and more difficult because of the large spans of acid-base property (the neutral and acidic saponins), molecular mass (400-1400 Da), and rather low content. Herein, an off-line multidimensional chromatography/high-resolution mass spectrometry approach was presented: ion exchange chromatography (IEC) as the first dimension of separation, hydrophilic interaction chromatography (HILIC) in the second dimension, and reversed-phase chromatography (RPC) for the third dimension which was hyphenated to a Q Exactive Q-Orbitrap mass spectrometer. By applying to the flower buds of P. ginseng (PGF), P. quinquefolius (PQF), and P. notoginseng (PNF), IEC using a PhenoSphere^TM SAX column could fractionate the total extracts into the neutral (unretained) and acidic (retained) fractions, while HILIC (an XBridge Amide column) and RPC (BEH Shield RP18 column) achieved the hydrophilic interaction and hydrophobic interaction separations, respectively. Q-Orbitrap mass spectrometry offered rich structural information and complementary resolution to the co-eluting components, particular to those minor ones by including precursor ion lists in data-dependent acquisition. We could characterize 803 ginsenosides from PGF, 795 from PQF, and 833 from PNF, and 1561 thereof are potentially unknown. These results can indicate the great potential of this multidimensional approach in the ultra-deep characterization of complex herbal samples supporting the efficient discovery of potentially novel natural compounds.

Accurate and ultrasensitive determination of 72 parent and halogenated polycyclic aromatic hydrocarbons in a variety of environmental samples via gas chromatography-triple quadrupole mass spectrometry

Polycyclic aromatic hydrocarbons (PAHs) and their halogenated derivatives (XPAHs) are ubiquitous in various environmental media. Analytical problems, however, make it difficult to accurately determine their concentrations. To develop a satisfactory analytical method suitable for a diversity of PAHs and XPAHs in multiple environmental samples, we evaluated three commercial analytical columns (DB-5MS, Select PAH, and Rxi-PAH) for better chromatographic separation and optimized the analytical conditions for gas chromatography-triple quadrupole mass spectrometry (GC-MS/MS). Comparison of the abilities of the columns to separate peaks revealed that the Rxi-PAH was the best column for both PAH and XPAH analyses. Optimization of analytical conditions for GC-MS/MS resulted in sensitivities for PAHs and XPAHs that were 4.2-fold-2600-fold higher than the sensitivities of GC-high-resolution MS (GC-HRMS) (an example of a traditional analytical method). Although there were no statistically significant differences between the instrumental detection limits (IDLs) of PAHs and XPAHs measured by GC-HRMS, the IDLs of XPAHs were significantly lower than those of PAHs when measured by GC-MS/MS. This difference could be attributed to the unique ionization patterns of XPAHs in the GC-MS/MS analysis, which suppressed background noise and increased the analytical sensitivity. Analyses of PAHs and XPAHs in grilled chicken, vehicle exhaust, sea sediment, ambient air, and indoor dust via the analytical method optimized in this study revealed that the proposed method was sufficiently sensitive, comprehensive, and versatile for risk assessment purposes, and could eliminate interferences associated with the co-elution of target PAHs and XPAHs.