Determination of Ultratrace Level 135Cs and 135Cs/137Cs Ratio in Small Volume Seawater by Chemical Separation and Thermal Ionization Mass Spectrometry

Disproportionately High Contributions of 60 Year Old Weapons-137Cs Explain the Persistence of Radioactive Contamination in Bavarian Wild Boars

Radionuclides released from nuclear accidents or explosions pose long-term threats to ecosystem health. A prominent example is wild boar contamination in central Europe, which is notorious for its persistently high 137Cs levels. However, without reliable source identification, the origin of this decades old problem has been uncertain. Here, we target radiocesium contamination in wild boars from Bavaria. Our samples (2019-2021) range from 370 to 15,000 Bq·kg-1 137Cs, thus exceeding the regulatory limits (600 Bq·kg-1) by a factor of up to 25. Using an emerging nuclear forensic fingerprint, 135Cs/137Cs, we distinguished various radiocesium source legacies in their source composition. All samples exhibit signatures of mixing of Chornobyl and nuclear weapons fallout, with 135Cs/137Cs ratios ranging from 0.67 to 1.97. Although Chornobyl has been widely believed to be the prime source of 137Cs in wild boars, we find that "old" 137Cs from weapons fallout significantly contributes to the total level (10-68%) in those specimens that exceeded the regulatory limit. In some cases, weapons-137Cs alone can lead to exceedances of the regulatory limit, especially in samples with a relatively low total 137Cs level. Our findings demonstrate that the superposition of older and newer legacies of 137Cs can vastly surpass the impact of any singular yet dominant source and thus highlight the critical role of historical releases of 137Cs in current environmental pollution challenges.

Innovative ICP-MS/MS Method To Determine the 135Cs/137Cs Ratio in Low Activity Environmental Samples

The ¹³⁵Cs/¹³⁷Cs isotopic ratio is a powerful tool for tracing the origin of radioactive contamination. Since the Fukushima accident, this ratio has been measured by mass spectrometry in several highly contaminated environmental matrices mainly collected near nuclear accident exclusion zones and former nuclear test areas. However, few data were reported at ¹³⁷Cs environmental levels (<1 kBq kg^-1). This is explained by the occurrence of analytical challenges related to the very low radiocesium content at the environmental level with the large presence of mass interferences, making ¹³⁵Cs and ¹³⁷Cs measurements difficult. To overcome these difficulties, a highly selective procedure for Cs extraction/separation combined with an efficient mass spectrometry measurement must be applied on a quantity of ca. 100 g of soil. In the current research, an innovative inductively coupled plasma-tandem mass spectrometry (ICP-MS/MS) method has been developed for the ¹³⁵Cs/¹³⁷Cs ratio measurement in low activity environmental samples. The use of ICP-MS/MS led to a powerful suppression of ¹³⁵Cs and ¹³⁷Cs interferences by introducing N₂O, He, and, for the first time, NH₃, into the collision-reaction cell. By adjusting the flow rates of these gases, the best compromise between a maximum signal in Cs and an effective interference elimination was achieved allowing a high Cs sensitivity of more than 1.10⁵ cps/(ng g^-1) and low background levels at m/z 135 and 137 lower than 0.6 cps. The accuracy of the developed method was successfully verified by analyzing two certified reference materials (IAEA-330 and IAEA-375) commonly used in the literature as validation samples and three sediment samples collected in the Niida River catchment (Japan) impacted by the Fukushima fallout.

Determination, Separation and Application of 137Cs: A Review

In the context of the rapid development of the world's nuclear power industry, it is necessary to establish background data on radionuclides of different samples from different regions, and the premise of obtaining such basic data is to have a series of good sample processing and detection methods. The radiochemical analysis methods of low-level radionuclides ¹³⁷Cs (Cesium) in environmental and biological samples are introduced and reviewed in detail. The latest research progress is reviewed from the five aspects of sample pretreatment, determination, separation, calculation, application of radioactive cesium and the future is proposed.

Determination of low-level 135Cs and 135Cs/137Cs atomic ratios in large volume of seawater by chemical separation coupled with triple-quadrupole inductively coupled plasma mass spectrometry measurement for its oceanographic applications

Radioisotopes of cesium are powerful tracer for oceanographic studies. In this work, a novel method was developed for determination of ultra-low level ¹³⁵Cs and ¹³⁷Cs in seawater using triple-quadrupole inductively coupled plasma mass spectrometry (ICP-MS/MS). Cesium was pre-concentrated from up to 45 L seawater samples using ammonium molybdophosphate (AMP) adsorption, following a selective leaching of cesium using Sr(OH)₂. The cesium was further purified from interfering elements using AMP-PAN and cation-exchange chromatography. Sr(OH)₂ leaching was found to be an effective approach for selective exchange of cesium from the AMP sorbent without dissolution, which avoids the problem of separation of huge amount of NH₄⁺ and MoO₄^2- in the following steps. The decontamination factors for barium and rubidium with the developed method were more than 4 × 10⁷ and 800, respectively. The separated ¹³⁵Cs and ¹³⁷Cs were measured using ICP-MS/MS by employing N₂O as reaction gas to further elimination of isobaric (i.e. ¹³⁵Ba and ¹³⁷Ba) and polyatomic ions interferences. A detection limit of 1.5 × 10^-16 g L^-1 for ¹³⁵Cs in seawater was achieved. The concentrations of ¹³⁵Cs in seawater from Baltic Sea, Danish straits and Roskilde Fjord were determined using the developed method to identify the sources of ¹³⁵Cs, the water masses exchange in this region was investigated using ¹³⁵Cs and ¹³⁷Cs.