Dual-Mode of Fluorescence Turn-On and Wavelength-Shift for Methylamine Gas Sensing Based on Space-Confined Growth of Methylammonium Lead Tribromide Perovskite Nanocrystals

Label-free fluorescent sensor for sensitive detection of ctDNA based on water stabilized CsPbBr3 nanosheet

The detection of circulating tumor DNA (ctDNA), as a practical liquid biopsy technique, was of great significance for the study of cancer diagnosis and prognosis. However, reported methods for detection ctDNA still have some limitations, such as tedious process and high cost. In this study, CsPbBr3 nanosheet (CsPbBr3 NS) with high water stability was prepared by etching, and its fluorescence intensity could be stably stored for 1 year. The Ti3C2Tx possessed high quenching efficiency for CsPbBr3 NS and the HOMO-LUMO orbital study revealed that the PET mechanism was responsible for fluorescence quenching. And the Ti3C2Tx showed stronger affinity towards single-stranded DNA (ssDNA), as compared with double-stranded DNA (dsDNA). The probe ssDNA could be adsorbed on the surface of Ti3C2Tx through π-π stacking. After the targets were recognized by probe ssDNA to form dsDNA, its affinity with Ti3C2Tx decreased and the active site of Ti3C2Tx recovered, causing a high quenching efficiency on CsPbBr3 NS. Based on this, a label-free fluorescent biosensor was designed for the sensitive detection of ctDNA (EGFR 19 Dels for non-small cell lung cancer, NSCLC). Under the optimal experimental conditions, this biosensor exhibited a detection limit of 180 fM and a linear range of 50 pM-350 pM with amplification of magnetic beads through strand displacement reaction. In addition, this sensor was applied to the detection of ctDNA in serum samples and cells lysates. This method for ctDNA detection was expected to have great potential for biomarker detection in the field of liquid biopsy.

Photoluminescence Enhancement in Silica-Confined Ligand-Free Perovskite Nanocrystals by Suppression of Silanol-Induced Traps and Phase Impurities

The detriments of intrinsic silanol groups in mesoporous silica to the photoluminescence (PL) of lead halide perovskite nanocrystals (LHP NCs) confined in the template have never been determined and clearly elucidated. Here, we disclose that silanol-induced Cs+ and Br- deficiencies prompt the generation of traps and CsPb2Br5 impurities. The temperature-dependent PL spectra verify the higher energetic barrier of trap states in CsPbBr3 NCs confined in silanol-rich mesoporous silica. Femtosecond transient absorption spectra reveal the trapped state mediates a broadband photoinduced absorption and long-lived decay pathway of CsPbBr3 NCs in silanol-rich templates. A remarkable improvement (up to 160-fold) in PL quantum yields is realized by simple silanol elimination. This work demonstrates the detrimental effects of silanol sites on the PL properties of LHP NCs impregnated in mesoporous silica and provides a new perspective for the ligand-free synthesis of high-quality LHP NCs in mesoporous templates by facile impregnation for practical applications.

Perovskite Nanocrystals: Superior Luminogens for Food Quality Detection Analysis

With the global limited food resources receiving grievous damage from frequent climate changes and ascending global food demand resulting from increasing population growth, perovskite nanocrystals with distinctive photoelectric properties have emerged as attractive and prospective luminogens for the exploitation of rapid, easy operation, low cost, highly accurate, excellently sensitive, and good selective biosensors to detect foodborne hazards in food practices. Perovskite nanocrystals have demonstrated supreme advantages in luminescent biosensing for food products due to their high photoluminescence (PL) quantum yield, narrow full width at half-maximum PL, tunable PL in the entire visible spectrum, easy preparation, and various modification strategies compared with conventional semiconductors. Herein, we have carried out a comprehensive discussion concerning perovskite nanocrystals as luminogens in the application of high-performance biosensing of foodborne hazards for food products, including a brief introduction of perovskite nanocrystals, perovskite nanocrystal-based biosensors, and their application in different categories of food products. Finally, the challenges and opportunities faced by perovskite nanocrystals as superior luminogens were proposed to promote their practicality in the future food supply.

In Situ Growth of Lead-Free Cs2CuBr4 Perovskite Quantum Dots in KIT-6 Mesoporous Molecular Sieve for CO2 Adsorption, Activation, and Reduction

Metal halide perovskites (MHPs) are emerging as promising candidates for photocatalytic CO₂ conversion. However, their practical application is still restricted by the poor intrinsic stability and weak adsorption/activation toward CO₂ molecules. The rational design of MHPs-based heterostructures with high stability and abundant active sites is a potential solution to this obstacle. Herein, we report the in situ growth of lead-free Cs₂CuBr₄ perovskite quantum dots (PQDs) in KIT-6 mesoporous molecular sieve, obtaining remarkable photocatalytic CO₂ reduction activity and durable stability. The optimized Cs₂CuBr₄@KIT-6 heterostructure exhibits the photocatalytic CO and CH₄ evolution rates of 51.6 and 17.2 μmol g^-1 h^-1, respectively, far exceeding those of pristine Cs₂CuBr₄. On the basis of in situ diffuse reflectance infrared Fourier transform spectra and theoretical investigations, the detailed CO₂ photoreduction pathway is systematically revealed. This work provides a new route for the rational construction of perovskite-based heterostructures with strong CO₂ adsorption/activation and good stability for photocatalytic CO₂ reduction.

Colorimetric Sensing of the Peroxide Number of Milk Powder Using CsPbBr3 Perovskite Nanocrystals

In this study, a wavelength-shift-based colorimetric sensing approach for the peroxide number of milk powder using CsPbBr₃ perovskite nanocrystals (CsPbBr₃ NCs) has been developed. Through the fat extraction, REDOX reactions and halogen exchange, as well as the optimized experimental conditions, a colorimetric sensing method was established to determine the peroxide number of milk powder samples. The integrated process of milk powder fat extraction and the REDOX process greatly shortened the determination time. This colorimetric method has a good linear correlation in the range of the peroxide number from 0.02 to 1.96 mmol/kg, and the detection limit was found to be 3 μmol/kg. This study further deepens the application prospect of wavelength-shift-based colorimetric sensing using CsPbBr₃ NCs.

Traffic light-type ratiometric fluorescence visual sensing of Cs+ in soybean oil based on dimension regulation of 2D perovskite nanosheets

Determination of cesium ion in soybean oil is of high importance since the increasing risk from releasing of main component of nuclear waste cesium 137. The complex composition and high viscosity of soybean oil make it necessary to convert it into water phase by nitration before detection, so developing a simple, accurate and sensitive method for on-site sensing of Cs⁺ in soybean oil is still a big challenge. In this work, we report a traffic light-type ratiometric fluorescence strategy for the visual sensing of Cs⁺ in soybean oil based on dimensional regulation of two dimensional (PEA)₂PbI₄ perovskite nanosheets (NSs). The PEA⁺ in (PEA)₂PbI₄ NSs exchanged with Cs⁺ and lead to dimension of partial (PEA)₂PbI₄ NSs progressively increase from 2D to 3D CsPbI₃ NCs. Resultantly, the fluorescence of (PEA)₂PbI₄ NSs decreases with a concomitant fluorescence enhancement of CsPbI₃ NCs upon increasing the concentrations of Cs⁺, and the emission accordingly change from green, yellow to red with a high fluorescence colorimetric resolution up to 5.0 μM, make it successful to achieve on-site sensing of Cs⁺ in soybean oil just with naked eye in 5 min without any nitration, demonstrating a bright application future for determination of Cs⁺ in the soybean oil.

Space-confined growth of nanoscale metal-organic frameworks/Pd in hollow mesoporous silica for highly efficient catalytic reduction of 4-nitrophenol

The development of confined growth of metal-organic frameworks (MOFs) in a nano-space remains a challenge mainly due to the spatial size randomness and inhomogeneity of host materials and the limitation of MOF species. In this study, we developed a general "stepwise vacuum evaporation" strategy, which allows the nano-confined growth of MOFs in hollow mesoporous silica nanospheres (HMSN) by the vacuum forces and the capillary effect. A series of nanoscale MOFs including ZIF-8, ZIF-90, HKUST-1, MIL-53(Cr) and UiO-66-NH2 were confinely synthesized inside the cavities of HMSN, resulting in hierarchically porous composites with core-shell structures. Further functionalization was studied by anchoring Pd to obtain UiO-66-NH2/Pd@HMSN catalyst, which exhibited excellent activity in the catalytic reduction of 4-nitrophenol to 4-aminophenol under ambient condition.

Gas-Mediated Immunoassay for the Carcinoembryonic Antigen at Atmospheric Pressure with Smartphone Coupling with the Fluorescence Quenching Length of Perovskite Capillary

By combining the photothermal properties of the 3,3',5,5'-tetramethylbenzidine oxidation product (TMBox) with the sensitive quenching of perovskite fluorescence by ammonia gas, a gas-mediated immunoassay at atmospheric pressure was constructed, which took the fluorescence quenching length of perovskite fluorescent capillary as the signal output. First, a CsPbBr₃ perovskite with surface modification of 3-aminopropyl triethoxysilane was synthesized by thermal injection and decorated to the capillary wall by glutaraldehyde cross-linking. In the presence of H₂O₂ and the tumor marker carcinoembryonic antigen (CEA), TMB was oxidized to TMBox by the horseradish peroxidase (HRP)-labeled CEA antibody. The photothermal effect of TMBox at 808 nm laser irradiation increases the concentration of ammonia gas, and the prepared fluorescent capillary can respond sensitively to ammonia gas. The fluorescence quenching length can be observed by the naked eye for a semiquantitative evaluation of CEA concentration. At the same time, we developed a mobile APP for the first time to measure the fluorescence quenching length. In the range of 0-20 ng mL^-1, the quenching length increased linearly with the increase in CEA concentration, and the detection limit was 0.078 ng mL^-1. This method has been successfully used for the detection of CEA in human serum with a recovery of 95.8%-106.5%.

Recent Progress of Perovskite Nanocrystals in Chem/Bio Sensing

Perovskite nanocrystals (PNCs) are endowed with extraordinary photophysical properties such as wide absorption spectra, high quantum yield, and narrow emission bands. However, the inherent shortcomings, especially the instability in polar solvents and water incompatibility, have hindered their application as probes in chem/bio sensing. In this review, we give a fundamental understanding of the challenges when using PNCs for chem/bio sensing and summarize recent progress in this area, including the application of PNCs in various sensors and the corresponding strategies to maintain their structural integrity. Finally, we provide perspectives to promote the future development of PNCs for chem/bio sensing applications.

CsPbBr3 and CsPbBr3/SiO2 Nanocrystals as a Fluorescence Sensing Platform for High-Throughput Identification of Multiple Thiophene Sulfides

Air pollution is a serious problem. Refractory thiophene sulfides, which cause air pollution, bring great challenges to their rapid and accurate identification. In this work, we propose a fluorescent sensor array based on two perovskite nanocrystals (CsPbBr₃ NCs and CsPbBr₃/SiO₂ NCs) to distinguish different thiophene sulfides. The hydrogen bonding force between the thiophenics of thiophene sulfides and the amino groups of the perovskite NCs results in the weakening of the fluorescence signals of the perovskite NCs. The diverse interactions between thiophene sulfides and two perovskite NCs provide rich information, which can be obtained on the sensor array and identified by linear discriminant analysis. Five thiophene sulfides (i.e., benzothiophene, dibenzothiophene, 2-methylbenzothiophene, 3-methylthiophene, and thiophene) were discriminated by the sensor array at concentrations of 10-50 ppm. The effectiveness of the sensor array was further verified in the discrimination of blinded samples, in which all 10 samples were correctly identified. In addition, it is gratifying that even binary mixtures of thiophene sulfides could be distinguished by the proposed sensor array.

A pyrylium salt-based fluorescent probe for the highly sensitive detection of methylamine vapour

The MTPY exhibits an obvious fluorescence response from yellow to cyan when reacted with CH3NH2 with a low detection limit (2.6 ppt, 8.4 × 10−8 M). The sensing mechanism was traced by mass spectrometry.

Multifunctional MgO/HKUST-1 Composite for Capture, Catalysis, and Cyclic Cataluminescence Detection of Esters All-In-One to Rapidly Identify Scented Products

The integration of metallic oxide and metal-organic frameworks has attracted considerable attention as obtained composite materials because they show synergistic effects in applications of catalysis and sensing. Herein, we developed the hybrid MgO and HKUST-1 for efficient capture, catalysis, and cyclic cataluminescence (CCTL) detection of esters all-in-one to rapidly identify scented products. The multifunctional MgO/HKUST-1 composite with high CCTL activity was synthesized and characterized. The multifunctional MgO/HKUST-1 composite acts as an enrichment material for ester capture and serves as a catalyst, assisting the analyte to trigger multistage signals. The multistage signals of ester-containing scented products also satisfy the exponential decay equation with a certain τ-value. The τ-values obtained by the CCTL system were applied to identify the brands of essential oils. The working temperature served as the sensor element to obtain various τ-values. The τ-values constituted a digital code to label the different brands of cigarettes with the same aroma type. The multistage signals could be used to distinguish the origin regions of essential oils and tobacco. This work combines the CCTL strategy with the sample pretreatment, opening up a new direction to develop CCL and providing a new platform to rapidly identify ester-containing scented products.

Ultrasensitive Temperature Sensing Based on Ligand-Free Alloyed CsPbClx Br3-x Perovskite Nanocrystals Confined in Hollow Mesoporous Silica with High Density of Halide Vacancies

Temperature sensing based on fluorescent semiconductor nanocrystals has recently received immense attention. Enhancing the trap-facilitated thermal quenching of the fluorescence should be an effective approach to achieve high sensitivity for temperature sensing. Compared with conventional semiconductor nanocrystals, the defect-tolerant feature of lead halide perovskite nanocrystals (LHP NCs) endows them with high density of defects. Here, hollow mesoporous silica (h-SiO₂ ) template-assisted ligand-free synthesis and halogen manipulation (chloride-importing) are proposed to fabricate highly defective yet fluorescent CsPbCl_1.2 Br_1.8 NCs confined in h-SiO₂ (CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ ) for ultrasensitive temperature sensing. The trap barrier heights, exciton-phonon scattering, and trap state filling process in the CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ and CsPbBr₃ NCs@h-SiO₂ are studied to illustrate the higher temperature sensitivity of CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ at physiological temperature range. By integrating the thermal-sensitive CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ and thermal-insensitive K₂ SiF₆ :Mn⁴⁺ phosphor into the flexible ethylene-vinyl acetate polymer matrix, ratiometric temperature sensing from 30.0 °C to 45.0 °C is demonstrated with a relative temperature sensitivity up to 13.44% °C^-1 at 37.0 °C. The composite film shows high potential as a thermometer for monitoring the body temperature. This work demonstrates the unparalleled temperature sensing performance of LHP NCs and provides new inspiration on switching the defects into advantages in sensing applications.

Fluorometric determination of ziram using CsPbBr3 quantum dots

A strategy based on CsPbBr₃ quantum dots (QDs) is described for the determination of ziram pesticide. A facile and inert gas-free method was used for the synthesis of CsPbBr₃ QDs. The obtained CsPbBr₃ QDs displayed turn-off fluorescence behavior for ziram. The fluorescence intensity of the CsPbBr₃ QDs (E_x/E_m = 365/516 nm) was inversely proportional to the concentration of ziram (0.10 to 50.0 ppm) with a detection limit of 0.086 ppm. Notably, satisfactory recoveries (100 ± 0.25 to 107 ± 5.72%) were obtained in spiked fruit samples, which demonstrated that this method is capable of detecting ziram in real samples. In addition, the mechanism for the detection of ziram was investigated in detail. According to the results, this mechanism can be tentatively explained by fluorescence quenching originating from the increased surface defects and the structural changes of the CsPbBr₃ QDs. The detection ability of this strategy shows promising applicability in food safety.

Perovskite Nanomaterial-Engineered Multiplex-Mode Fluorescence Sensing of Edible Oil Quality

Water-soluble fluorescence nanomaterials are widely applied for water-phase food safety monitoring. However, there is still a challenge for the development of oil-soluble fluorescence nanomaterials for oil-phase food safety detection. Particularly, the edible oil quality has a huge impact on human health, in which excessive acid number (AN), 3-chloro-1,2-propanediol (3-MCPD), and moisture content (MC) are critical monitoring factors. Herein, orange-emitting oil-soluble CsPbBr_1.5I_1.5 quantum dots (QDs) were prepared and applied for AN and 3-MCPD detection depending on fluorescence quenching and wavelength shifts. A "turn-off" fluorescence sensor and "wavelength-shift" fluorescence colorimetric sensor were fabricated for AN and 3-MCPD detection. Water-sensitive mesoporous silica-coated CsPbBr_1.5I_1.5 QDs were employed for the establishment of ratiometric fluorescence sensors for MC monitoring by introducing water-stable green-emitting CsPbBr₃ nanosheets (NSs) as reference probes. Perovskite nanomaterial-engineered multiplex-mode fluorescence sensors were proposed for the detection of AN, 3-MCPD, and MC in edible oil, with the limits of detection (LODs) of 0.71 mg KOH/g, 39.8 μg/mL 3-MCPD, and 0.45% MC, respectively. This work not only expands the application of perovskite nanomaterials in the bioanalysis field but also provides new materials and novel approaches for the multiplex-mode oil-phase food safety monitoring.

Colorimetric Determination of Chloridion in Domestic Water Based on the Wavelength Shift of CsPbBr3 Perovskite Nanocrystals via Halide Exchange

Cubic phase CsPbBr3 perovskite nanocrystals (PNCs) was prepared by a high-temperature hot-injection method. The high photoluminescence quantum yield (PLQY) of as-prepared CsPbBr3 PNCs was 87%, which can be used for the determination of chloridion in domestic water samples based on their wavelength-shift characteristics via halide exchange. The proposal approach for the determination of chloridion reveals a linear correlation ranged from 10 to 200 μM of the chloridion concentration and the wavelength shift of CsPbBr3 PNCs with a correlation coefficient of R2 = 0.9956. The as-mentioned method reveals neglectable responses towards those co-existing ions in the water aside from chloridion, due to the quick exchange between Cl and Br and the outstanding color change caused by wavelength shift. The strategy has been applied to the determination of chloridion in water samples with the recoveries of 98.9–104.2% and the limit of detection (LOD) of 4 μM. These results show that the suggested approach is promising for the development of novel fluorescence detection for chloridion in water.

Review on Sensing Applications of Perovskite Nanomaterials

Recently, perovskite-based nanomaterials are utilized in diverse sustainable applications. Their unique structural characteristics allow researchers to explore functionalities towards diverse directions, such as solar cells, light emitting devices, transistors, sensors, etc. Many perovskite nanomaterial-based devices have been demonstrated with extraordinary sensing performance to various chemical and biological species in both solid and solution states. In particular, perovskite nanomaterials are capable of detecting small molecules such as O2, NO2, CO2, etc. This review elaborates the sensing applications of those perovskite materials with diverse cations, dopants and composites. Moreover, the underlying mechanisms and electron transport properties, which are important for understanding those sensor performances, will be discussed. Their synthetic tactics, structural information, modifications and real time sensing applications are provided to promote such perovskite nanomaterials-based molecular designs. Lastly, we summarize the perspectives and provide feasible guidelines for future developing of novel perovskite nanostructure-based chemo- and biosensors with real time demonstration.