In Situ Formation of Multifunctional DNA Nanospheres for a Sensitive and Accurate Dual-Mode Biosensor for Photoelectrochemical and Electrochemical Assay

Photoelectrochemical signal polarity transition mediated by quercetin for the detection of neuron-specific enolase

A photoelectrochemical (PEC) biosensor with a wide linear detection range was developed for the sensitive detection of neuron-specific enolase (NSE), which was achieved by applying a photocurrent polarity transition strategy mediated by quercetin. The coupling reaction between Cr(VI) and quercetin drives the signal polarity from anodic to cathodic. When only quercetin is present in the test solution, photogenerated electrons are transferred to the electrode to generate anodic photocurrent. However, in the presence of the target, the signal probe released Cr(VI), which interacted with quercetin, and the electron transfer direction was changed to achieve signal polarity conversion. Meanwhile, protoporphyrin-sensitized Bi:SrTiO3 nanocubes were used as matrix photoactive materials to provide basic photocurrent. The doping of Bi element would adjust the bandgap of SrTiO3, and the organic-inorganic composite material exhibits good photostability and chemical stability that can maintain stable photoelectric properties over a long period of time. Such a novel signal polarity transition strategy greatly broadened the sensor detection to the range of 0.00007-170 ng mL-1 and obtained a relatively low detection limit (25 fg mL-1), which greatly improved the detection sensitivity and accuracy of the biosensor.

Dual electrochemical signal "signal-on-off" sensor based on CHA-Td-HCR and CRISPR-Cas12a for MUC1 detection

Mucin 1 (MUC1) is frequently overexpressed in various cancers and is essential for early cancer detection. Current methods to detect MUC1 are expensive, time-consuming, and require skilled personnel. Therefore, developing a simple, sensitive, highly selective MUC1 detection sensor is necessary. In this study, we proposed a novel "signal-on-off" strategy that, in the presence of MUC1, synergistically integrates catalytic hairpin assembly (CHA) with DNA tetrahedron (Td)-based nonlinear hybridization chain reaction (HCR) to enhance the immobilization of electrochemically active methylene blue (MB) on magnetic nanoparticles (MNP), marking the MB signal "on". Concurrently, the activation of CRISPR-Cas12a by isothermal amplification products triggers the cleavage of single-stranded DNA (ssDNA) at the electrode surface, resulting in a reduction of MgAl-LDH@Fc-AuFe-MIL-101 (containing ferrocene, Fc) on the electrode, presenting the "signal-off" state. Both MB and MgAl-LDH@Fc-AuFe-MIL-101 electrochemical signals were measured and analyzed. Assay parameters were optimized, and sensitivity, stability, and linear range were assessed. Across a concentration spectrum of MUC1 spanning from 10 fg/mL to 100 ng/mL, the MB and MgAl-LDH@Fc-AuFe-MIL-101 signals were calibrated with each other, demonstrating a "signal-on-off" dual electrochemical signaling pattern. This allows for the precise and quantitative detection of MUC1 in clinical samples, offering significant potential for medical diagnosis.

A perylene diimide electrochemical probe with persulfate as a signal enhancer for dopamine sensing

Dopamine (DA) is an important biomarker related to parkinsonism, schizophrenia and renal disease. Traditional electrochemical sensors for DA were based on the direct electrochemical oxidation of DA. In this paper, we report a new sensing strategy using N,N'-di(trimethylaminoethyl)perylene diimide (TMPDI) as an electrochemical probe and K2S2O8 as a signal enhancer for DA detection between 0 and -0.7 V with the DPV technique. MoS2 nanoflowers prepared by the hydrothermal method were used as a nanocarrier to load TMPDI. The reduction current of TMPDI was found to show a stepwise and significant increase at -0.24 V with the increase of concentration of K2S2O8 due to the continuous cycle of TMPDI molecules' electrochemical reduction and chemical oxidation. The presence of DA caused a large decrease of the reduction current of TMPDI due to the synergistic interaction of the competitive consumption of DA for K2S2O8 and the blocking effect of polyDA adhering to the electrode surface. The decreased current exhibited a linear response for DA from 10 pM to 100 μM with a detection limit of 4.1 pM and the proposed sensor showed high selectivity and excellent feasibility in human urine/serum sample detection.

A dual-mode "signal-on" split-type aptasensor for bisphenol A via target-induced hybridization chain reaction amplification

Herein, a dual-mode detection system was constructed for efficient and accurate detection of bisphenol A (BPA) with the assistance of the BPA-induced hybridization chain reaction (HCR). The captured DNA (cDNA) was first modified on the surface of magnetic spheres modified with gold nanoparticles and polydopamine and then hybridized with the BPA aptamer to form double-stranded DNA (dsDNA). In the presence of the BPA target, the BPA aptamer was released from the surface of the magnetic sphere. The free cDNA triggered a HCR to construct a DNA duplex. Methylene blue (MB), as a bifunctional probe, was intercalated into the double-stranded DNA to amplify the photocurrent (IPEC) of the CdS-modified electrode and generate an electrochemical current (IEC) at the same time. Under the optimized conditions, the PEC and EC signal responses of the system were linear to the logarithm of BPA concentration in the range of 1.0 × 10-10 M to 1.0 × 10-5 M. The detection limits were found to be 1.27 × 10-11 M and 3.0 × 10-11 M using the PEC and EC methods, respectively. The constructed dual-mode biosensor exhibited good performance for real sample analysis, demonstrating its promising potential for practical applications. In addition, this dual-mode detection strategy provides more accurate and reliable detection results.

Construction of a Dual-Mode Immune Platform Based on the Photothermal Effect of AgCo@NC NPs for the Detection of α-Fetoprotein

Compared with the accuracy of a single signal and the limitation of environmental applicability, the application value of dual-mode detection is gradually increasing. To this end, based on the photothermal effect of Ag/Co embedded N-rich mesoporous carbon nanomaterials (AgCo@NC NPs), we designed a dual-mode signal response system for the detection of α-fetoprotein (AFP). First, AgCo@NC NPs act as a photothermal immunoprobe that converts light energy into heat driven by a near-infrared (NIR) laser and obtains temperature changes corresponding to the analyte concentration on a hand-held thermal imager. In addition, this temperature recognition system can significantly improve the efficiency of Fenton-like reactions. AgCo@NC NPs act as peroxidase mimics to initiate the generation of poly N-isopropylacrylamide (PNIPAM, resistance enhancer) by cascade catalysis and the degradation of methylene blue (MB), thus enabling electrochemical testing. The dual-mode assay ranges from 0.01 to 100 and 0.001-10 ng/mL, with lower limits of detection (LOD) of 3.2 and 0.089 pg/mL, respectively, and combines visualization, portability, and high efficiency, opening new avenues for future clinical diagnostics and inhibitor studies.

Highly sensitive detection of circulating tumour cells based on an ASV/CV dual-signal electrochemical strategy

Circulating tumour cells (CTCs), as a tumour marker, may provide more information in early diagnosis and accurate therapy of cancer patients. Electrochemical detection of CTCs has exhibited exceptional advantages. However, single-signal electrochemical detection usually has a high probability of false positives coming from interferents, operating personnel, and nonstandard analytical processes. Herein, a dual-signal strategy using anodic stripping voltammetry (ASV) and cyclic voltammetry (CV) for highly sensitive detection of CTCs was developed. When MCF-7 cells were present, aptamer DNA (DNA1)-magnetic beads (MBs) were captured by CTCs and detached from the biosensing electrodes. Following magnetic separation, polystyrene bead (PS)-CdS QDs labelled on MCF-7 cells were dissolved by HNO3 and the intensity of the oxidation peak current of Cd2+ ions was proportional to the amount of MCF-7 cells in ASV (y = 6.8929 lg Ccells + 1.0357 (Ccells, cells per mL; R2, 0.9947; LOD, 3 cells per mL)). Meanwhile, the anodic peak currents of the remaining electrode in CV were also proportional to the amount of MCF-7 cells (y = 3.7891 lg Ccells + 52.3658 (Ccells, cells per mL; R2, 0.9846; LOD, 3 cells per mL)). An ASV/CV dual-signal biosensor for electrochemical detection of CTCs was achieved, which overcame the limitations of any single-signal mode and improved the detection reliability and precision.

Smart enzyme-free amplification dual-mode self-powered platform designed on two-dimensional networked graphdiyne and DNA nanorods for ultra-sensitive detection of breast cancer biomarkers

Research has shown that microRNAs exhibit regular dysregulation in cancers, making them potential biomarkers for cancer diagnosis. However, achieving specific and sensitive detection of microRNAs has been a challenging task. To address this issue, two-dimensional networked graphdiyne is used to fabricate a self-powered biosensor and establish a new approach for ultra-responsive dual-mode detection of miRNA-141, a breast cancer biomarker. This method detects miRNA-141 using both electrochemical and colorimetric modes by measuring the output electrical signal of an enzyme-based biofuel cell and the RGB blue value of the electrolyte solution. Tetrahedral DNA and DNA nanorods also are immobilized on the electrode as a biocathode and methylene blue is used as the electron acceptor, which is fixed in the DNA phosphate backbone through electrostatic adsorption. The bioanode catalyzes the oxidation of glucose to produce electrons, which reduces methylene blue to its reduced form, resulting in a high open-circuit voltage (EOCV) and a highger RGB Blue value, enabling dual-mode detection. A reliable linear correlation is observed between EOCV values and miRNA-141 concentrations ranging from 0.0001 to 100 pM, with a detection limit of 21.9 aM (S/N = 3). Additionally, the colorimetric mode also demonstrates a reliable linear correlation with a concentration range of 0.0001-10000 pM, and this method can detect a concentration of 22.2 aM (S/N = 3). This innovative research realizes sensitive and accurate determination of miRNA-141 and provides an important new method for cancer diagnosis.

Electrochemical nucleic acid sensors: Competent pathways for mobile molecular diagnostics

Electrochemical nucleic acid biosensor has demonstrated great promise in clinical diagnostic tests, mainly because of its flexibility, high efficiency, low cost, and easy integration for analytical applications. Numerous nucleic acid hybridization-based strategies have been developed for the design and construction of novel electrochemical biosensors for diagnosing genetic-related diseases. This review describes the advances, challenges, and prospects of electrochemical nucleic acid biosensors for mobile molecular diagnosis. Specifically, the basic principles, sensing elements, applications in diagnosis of cancer and infectious diseases, integration with microfluidic technology and commercialization are mainly included in this review, aiming to provide new insights and directions for the future development of electrochemical nucleic acid biosensors.

Electrochemical Affinity Biosensors: Pervasive Devices with Exciting Alliances and Horizons Ahead

Electrochemical affinity biosensors are evolving at breakneck speed, strengthening and colonizing more and more niches and drawing unimaginable roadmaps that increasingly make them protagonists of our daily lives. They achieve this by combining their intrinsic attributes with those acquired by leveraging the significant advances that occurred in (nano)materials technology, bio(nano)materials and nature-inspired receptors, gene editing and amplification technologies, and signal detection and processing techniques. The aim of this Perspective is to provide, with the support of recent representative and illustrative literature, an updated and critical view of the repertoire of opportunities, innovations, and applications offered by electrochemical affinity biosensors fueled by the key alliances indicated. In addition, the imminent challenges that these biodevices must face and the new directions in which they are envisioned as key players are discussed.

Construction of electrochemical and electrochemiluminescent dual-mode aptamer sensors based on ferrocene dual-functional signal probes for the sensitive detection of Alternariol

In this study, a novel dual-mode aptamer sensor was developed using Fca-DNA₂ as the quenching electrochemiluminescence (ECL) and electrochemical (EC) signal response probe, and Ru-MOF/Cu@Au NPs were used as the ECL substrate platform to detect Alternariol (AOH) via a competitive reaction between AOH and Fca-DNA₂. Compared with the conventional aptamer sensor with a single detection signal, this dual-mode aptamer sensor has the following advantages: (1) Electrodeposition-based rapid synthesis Ru-MOF on the electrode surface. (2) The Signal amplification substance Cu@Au NPs can synergistically catalyze Triethanolamine (TEOA) to amplify ECL behavior. (3) The aptamer sensor employs the dual-functional material Fca, which can detect both ECL and EC signals, increasing the result accuracy. Both ECL and EC methods have excellent detection performance for AOH in the detection range of 0.1 pg/mL to 100 ng/mL, with detection limits of 0.014 and 0.083 pg/mL, respectively, and are expected to be used for sensitive AOH detection in real samples.

Dual-functional Nanomaterials Polyo-phenylenediamine and Ru-Au Complement Each Other to Construct an Electrochemical and Electrochemiluminescent Dual-Mode Aptamer Sensor for Sensitive Detection of Alternariol

To sensitively monitor trace amounts of alternariol (AOH) in fruits, a dual-mode aptamer sensor utilizing the dual-function nanomaterial PoPD/Ru-Au was developed. This sensor provides both electrochemical (EC) and electrochemiluminescence (ECL) signals, which can greatly avoid the potential false positive of the traditional single signal, thus enhancing the accuracy and reliability of detection results. Polyo-phenylenediamine (PoPD), known for its favorable EC response, can also assist in enhancing the ECL behavior of Ru-Au. Furthermore, Ru-Au demonstrates excellent ECL performance and effectively activates K2S2O8 to amplify the EC response of PoPD. The complementary effect of the two can effectively amplify the final detection signal. Additionally, the PoPD/Ru-Au nanomaterial exhibits excellent electrical conductivity, further enhancing the EC and ECL response signals. The experimental results demonstrate that the EC detection range of AOH was 0.01-100 ng/mL, while the ECL detection range was 0.001-100 ng/mL, both exhibiting a satisfactory linear relationship. Therefore, the mutual verification of the detection results can be highly realized, and the purpose of avoiding wrong detection can be achieved.

CRISPR/Cas12a-Powered EC/FL Dual-Mode Controlled-Release Homogeneous Biosensor for Ultrasensitive and Cross-Validated Detection of Messenger Ribonucleic Acid

Accurate detection of cancer-associated mRNAs is beneficial to early diagnosis and potential treatment of cancer. Herein, for the first time, we developed a novel CRISPR/Cas12a-powered electrochemical/fluorescent (EC/FL) dual-mode controlled-release homogeneous biosensor for mRNA detection. A functionalized ssDNA P2-capped Fe3O4-NH2 loaded with methylene blue (P2@MB-Fe3O4-NH2) was synthesized as the signal probe, while survivin mRNA was chosen as the target RNA. In the presence of the target mRNA, the nicking endonuclease-mediated rolling circle amplification (NEM-RCA) was triggered to produce significant amounts of ssDNA, activating the collateral activity of Cas12a toward the surrounding single-stranded DNA. Thus, the ssDNA P1 completely complementary to ssDNA P2 was cleaved, resulting in that the ssDNA P2 bio-gate on Fe3O4-NH2 could not be opened due to electrostatic interactions. As a result, there was no or only a little MB in the supernatant after magnetic separation, and the measured EC/FL signal was exceedingly weak. On the contrary, the ssDNA P2 bio-gate was opened, enabling MB to be released into the supernatant, and generating an obvious EC/FL signal. Benefiting from the accuracy of EC/FL dual-mode cross-verification, high amplification efficiency, high specificity of NEM-RCA and CRISPR/Cas12a, and high loading of mesoporous Fe3O4-NH2 on signal molecules, the strategy shows aM-level sensitivity and single-base mismatch specificity. More importantly, the practical applicability of this dual-mode strategy was confirmed by mRNA quantification in complex serum environments and tumor cell lysates, providing a new way for developing a powerful disease diagnosis tool.

A fluorescence-electrochemiluminescence dual-mode sensor based on a "switch" system for highly selective and sensitive K-ras gene detection

Herein, an fluorescence (FL)-electrochemiluminescence (ECL) dual-mode biosensor is constructed based on the dual-signal "turn-on" strategy of functionalized metal-organic frameworks nanosheets (RuMOFNSs)-tetraferrocene for K-ras gene detection, and the mechanism of bursting through front-line orbital theory is explained for the first time. Amino-functionalized tetraferrocene-labeled probe DNA molecules are linked to RuMOFNSs by covalent amide bonds, acting as FL and ECL intensity switches. The target DNA, complementary to the probe DNA, triggers cyclic amplification of the target by nucleic acid exonuclease III (Exo III), repelling tetraferrocene reporter groups away from RuMOFNSs and inhibiting the electron transfer process and photoinduced electron transfer (PET) effect. These phenomena induce a double turn-on of FL and ECL signals with a high signal-to-noise ratio. The developed FL-ECL dual-mode sensing platform provides sensitive detection of the K-ras gene with detection limits of 0.01 fM (the detection range is 1 fM to 1 nM) and 0.003 fM (the detection range is 0.01 fM to 10 pM), respectively. In addition, the proposed dual-mode sensor can be easily extended to detect other disease-related biomarkers by changing the specific target and probe base sequences, depicting potential applications in bioanalysis and early disease diagnosis.

Dual-sensitized heterojunction PDA/ZnO@MoS2 QDs combined with multilocus domino-like DNA cascade reaction for ultrasensitive photoelectrochemical biosensor

In this work, by integrating with a highly efficient multilocus domino-like cascade reaction on DNA nanonet, an ultrasensitive PEC biosensor based on dual-sensitized PDA/ZnO@MoS₂ QDs photoactive material as signal probe was proposed for detection of miRNA-182-5p. The dual-sensitized PDA/ZnO@MoS₂ QD composed by both of p-n and S-scheme heterojunctions on electrode generated an extremely high initial PEC signal, which however quenched by CdTe QDs decorated on DNA nanonet owing to the significant p-n quenching effect. Thereafter, the output DNA (RS) from DSN enzyme-assisted target recycling amplification triggered an ingenious multilocus domino-like DNA cascade reaction on DNA nanonet for releasing numerous CdTe QDs. Thanks to the multilocus domino-like mode that owned abundant binding sites for increasing trigger efficiency and drove cascade reaction automatically advance along four stated pathways, the target conversion rate could be improved effectively compared with that of traditional approaches, significantly enhancing the detection sensitivity. Consequently, the developed PEC biosensor exhibited a low detection limit to 0.17 fM, providing a new avenue for sensitive, fast and reliable sensing of various DNA/RNA.

A convenient fluorescent/electrochemical dual-mode biosensor for accurate detection of Pb2+ based on DNAzyme cycle

The presence of heavy metals in the ecological environment is a serious threat to human health. Therefore, it is very important to establish a simple and sensitive method for the detection of heavy metals. Currently, most of the methods are single-channel sensing, and these methods are prone to false-positive signals, which reduces the accuracy. In this work, Pb²⁺-DNAzyme was immobilized on magnetic beads (MBs) using a linkage of biotin and streptavidin and successfully applied to the construction of a fluorescent/electrochemical dual-mode (DM) biosensor. The supernatant after magnetic separation formed a double strand on the electrode, which was combined with methylene blue (MB) for electrochemical detection (EC). At the same time, FAM-d was added to the precipitate, and after magnetic separation, the supernatant was subjected to fluorescent detection (FL). Under optimal conditions, the signal response of the constructed dual-mode biosensor showed a good linear relationship with the concentration of Pb²⁺. The DNAzyme-based dual-mode biosensor achieved sensitive and selective detection of Pb²⁺ with good accuracy and reliability, opening a new way for the development of biosensing strategies for the detection of Pb²⁺. More importantly, the sensor has high sensitivity and accuracy for the detection of Pb²⁺ in actual sample analysis.

Signal Amplification-Based Biosensors and Application in RNA Tumor Markers

Tumor markers are important substances for assessing cancer development. In recent years, RNA tumor markers have attracted significant attention, and studies have shown that their abnormal expression of post-transcriptional regulatory genes is associated with tumor progression. Therefore, RNA tumor markers are considered as potential targets in clinical diagnosis and prognosis. Many studies show that biosensors have good application prospects in the field of medical diagnosis. The application of biosensors in RNA tumor markers is developing rapidly. These sensors have the advantages of high sensitivity, excellent selectivity, and convenience. However, the detection abundance of RNA tumor markers is low. In order to improve the detection sensitivity, researchers have developed a variety of signal amplification strategies to enhance the detection signal. In this review, after a brief introduction of the sensing principles and designs of different biosensing platforms, we will summarize the latest research progress of electrochemical, photoelectrochemical, and fluorescent biosensors based on signal amplification strategies for detecting RNA tumor markers. This review provides a high sensitivity and good selectivity sensing platform for early-stage cancer research. It provides a new idea for the development of accurate, sensitive, and convenient biological analysis in the future, which can be used for the early diagnosis and monitoring of cancer and contribute to the reduction in the mortality rate.

Self-Powered DNAzyme Walker Enables Dual-Mode Biosensor Construction for Electrochemiluminescence and Electrochemical Detection of MicroRNA

Herein, an electrochemiluminescence (ECL) and electrochemical (EC) dual-mode biosensor platform with a self-powered DNAzyme walking machine was established for accurate and sensitive detection of miRNA-21. By employing a magnesium ion (Mn²⁺)-dependent DNAzyme cleavage cycling reaction, the walking machine was built by assembling DNAzyme walking strands and ferrocene (Fc)-labeled substrate strands on the Au nanoparticles and graphitic carbon nitride nanosheet (g-C₃N₄ NS)-covered electrode. The DNAzyme walking strand was first prohibited by a blocker strand. After the addition of target miRNA-21 and Mn²⁺, the DNAzyme walker could be activated and produce autonomous movements along the electrode track fueled by Mn²⁺-dependent DNAzyme-catalyzed substrate cleavage without additional energy supply. Notably, each walking step resulted in the cleavage of a substrate strand and the release of a Fc-labeled DNA strand fragment, allowing us to acquire an extreme ECL signal recovery of g-C₃N₄ inhibited by Fc. Meanwhile, numerous Fc-labeled DNA fragments escaped from the surface of the electrode, directly producing an obvious decrease in the square wave voltammetry (SWV) signal from Fc on the same sensing platform. This work not only avoided difficultly assembling various signal indicators but also significantly improved the sensitivity through using self-powered DNAzyme-walker amplification. Moreover, the proposed design employed the same reaction to produce two signal output modes, which could eliminate the interference from diverse reactive pathways on the outcome to mutually improve the accuracy. Therefore, the dual-mode miRNA-21 biosensor exhibited wide detection ranges of 100 aM to 100 nM with low detection limits of 54.3 and 78.6 aM by ECL and SWV modes, respectively, which provided an efficient and universal biosensing approach with extensive applications in early disease diagnosis and bioanalysis.

Capacitor-parallel-amplified decoupled photoelectrochemical/electrochromic dual-mode bioassay for sensitive detection of microRNA with high reliability

To achieve sensitive detection of low-content microRNA, photoelectrochemical/electrochromic dual-mode sensor with intrinsically low background signal has been developed, but the two detection modules are usually designed with a series-connected structure, which may cause signal interference and thus affect the detection reliability. To solve the above problems, a decoupled dual-mode bioassay for sensitive miRNA-21 detection with high reliability is constructed in this work, by selecting two capacitors to realize parallel amplification for the two detection modules, supplemented with a 3D DNA nanoring photoelectrode signal amplification strategy. The complete decoupling of the two detection modes, photoelectrochemical and electrochromic, as well as the use of digital multimeter, improves the reliability and accuracy of the sensor, and also frees it from dependence on electrochemical workstation, making detection more intuitive and faster. With simple structure, low cost, good reproducibility, high sensitivity, and easy operation, the capacitor-parallel-amplified decoupled photoelectrochemical/electrochromic dual-mode bioassay has broad application prospect in on-site point-of-care detection of diseases and low-cost clinical diagnosis. The design idea of decoupled dual-mode detector can also be extended to the construction of other dual-mode methods.

Au nano-flower/organic polymer heterojunction-based cathode photochemical biosensor with reduction-accelerated quenching effect of porphyrin manganese

In this work, a novel reduction-accelerated quenching of manganese porphyrin (MnPP) based signal-off cathode photochemical (PEC) biosensor by using Au nano-flower/organic polymer (PTB7-Th) heterojunction as platform was proposed for ultrasensitive detection of Hg²⁺. Firstly, the photoactive PTB7-Th with Au nano-flower on electrode could form a typical Mott-Schottky heterojunction for acquiring an extremely high cathode signal. Meanwhile, the presence of target Hg²⁺ could bring in the formation of T-Hg²⁺-T based scissor-like DNA walker, which thus activated efficient Mg²⁺-specific DNAzyme based cleavage recycling to shear hairpin H2 on electrode to exposure abundant trigger sites of hybridization chain reaction (HCR) for in-situ decoration of quencher MnPP. Here, besides the steric hinderance and light competition effect of MnPP decorated DNA nanowires attributing to signal decrease, we for the first time testified the MnPP reduction-accelerated quenching that constantly consumed the photo-generated electron by using cyclic voltammetry (CV). As a result, the proposed biosensor had excellent sensitivity and selectivity to Hg²⁺ in the range of 1 fM-10 nM with a detection limit of 0.48 fM. The actual sample analysis showed that the biosensor could reliably and quantitatively identify Hg²⁺, indicating an excellent application prospect in routine detection.

High-Efficiency 3D DNA Walker Immobilized by a DNA Tetrahedral Nanostructure for Fast and Ultrasensitive Electrochemical Detection of MiRNA

Herein, by directly limiting the reaction space, an ingenious three-dimensional (3D) DNA walker (IDW) with high walking efficiency is developed for rapid and sensitive detection of miRNA. Compared with the traditional DNA walker, the IDW immobilized by the DNA tetrahedral nanostructure (DTN) brings stronger kinetic and thermodynamic favorability resulting from its improved local concentration and space confinement effect, accompanied by a quite faster reaction speed and much better walking efficiency. Once traces of target miRNA-21 react with the prelocked IDW, the IDW could be largely activated and walk on the interface of the electrode to trigger the cleavage of H2 with the assistance of Mg²⁺, resulting in the release of amounts of methylene blue (MB) labeled on H2 from the electrode surface and the obvious decrease of the electrode signal. Impressively, the IDW reveals a conversion efficiency as high as 9.33 × 10⁸ in 30 min with a much fast reaction speed, which is at least five times beyond that of typical DNA walkers. Therefore, the IDW could address the inherent challenges of the traditional DNA walker easily: slow walking speed and low efficiency. Notably, the IDW as a DNA nanomachine was utilized to construct a sensitive sensing platform for rapid miRNA-21 detection with a limit of detection (LOD) of 19.8 aM and realize the highly sensitive assay of biomarker miRNA-21 in the total RNA lysates of cancer cell. The strategy thus helps in the design of a versatile nucleic acid conversion and signal amplification approach for practical applications in the areas of biosensing assay, DNA nanotechnology, and clinical diagnosis.

A high performance dual-mode biosensor based on Nd-MOF nanosheets functionalized with ionic liquid and gold nanoparticles for sensing of ctDNA

A dual-mode biosensor constructed based on photoelectrochemical (PEC) and electrochemical (EC) property was developed for assaying circulating tumor DNA (ctDNA), which is commonly used for triple-negative breast cancer diagnosis. Ionic liquid functionalized two-dimensional Nd-MOF nanosheets were successfully synthesized through a template-assisted reagent substituting reaction. Nd-MOF nanosheets integrated with gold nanoparticles (AuNPs) were able to improve photocurrent response and supply active sites for assembling sensing elements. To achieve selective detection of ctDNA, thiol-functionalized capture probes (CPs) were immobilized on the Nd-MOF@AuNPs modified glassy carbon electrode surface, thereby generating a "signal-off" photoelectrochemical biosensor for ctDNA under visible light irradiation. After the recognition of ctDNA, ferrocene-labeled signaling probes (Fc-SPs) were introduced into the biosensing interface. After hybridization between ctDNA and Fc-SPs, the oxidation peak current of Fc-SPs generated from square wave voltammetry can be employed as a "signal-on" electrochemical signal for ctDNA quantification. Under the optimized conditions, a linear relationship was obtained to the logarithm of ctDNA concentration in between 1.0 fmol L^-1 to 10 nmol L^-1 for the PEC model and 1.0 fmol L^-1 to 1.0 nmol L^-1 for the EC model. The dual-mode biosensor can provide accurate results for ctDNA assays, effectively eliminating the probable occurrence of false-positive or false-negative results in single-model assays. By switching DNA probe sequences, the proposed dual-mode biosensing platform can serve as a strategy for detecting other DNAs and possesses broad applications in bioassay and early disease diagnosis.

Superior graphdiyne self-powered biosensing platform with highly sensitivity and reliability for dual-mode detection of MicroRNA by integrating T7 Exonuclease and 3D DNA walker induced rolling circle amplification

A highly sensitivity self-powered biosensor is developed based on T7 exonuclease (T7 Exo) and 3D DNA walker induced rolling circle amplification (RCA) for electrochemical/colorimetric dual-mode detection of microRNA-21 (miRNA-21) with improved reliability. Taking its advantage of fascinating properties, such as high structure defects and good conductivity, graphdiyne is prepared and used to prepare high-performance enzyme biofuel cell. T7 Exo-assisted 3D DNA walker target recognition triggers RCA reaction to obtain a significantly amplified signal response. A capacitor is integrated to the enzyme biofuel cell to further amplify the electrochemical output signal of the self-powered biosensor. In detection system, glucose oxidase catalyzes glucose oxidation to produce hydrogen peroxide, and 3,3',5,5'-tetramethylbenzidine (TMB) is then catalyzed to generate colored products, so as to achieve the colorimetric detection of the target. Analysis signals of diverse modes are recorded independently. Consequently, detection of microRNA with improved reliability and wider signal response range are achieved by electrochemical/colorimetric dual-mode with detection limits of 0.15 and 33 fM (S/N = 3) respectively. In addition, the proposed self-powered biosensor successfully applied for the detection of miRNA-21 in human serum samples, confirming its practical applicability in clinical diagnosis. It is powerfully anticipated the proposed self-powered biosensor possesses great potential to be applied to other biomedical domains.

Nucleotide detection mechanism and comparison based on low-dimensional materials: A review

The recent pandemic has led to the fabrication of new nucleic acid sensors that can detect infinitesimal limits immediately and effectively. Therefore, various techniques have been demonstrated using low-dimensional materials that exhibit ultrahigh detection and accuracy. Numerous detection approaches have been reported, and new methods for impulse sensing are being explored. All ongoing research converges at one unique point, that is, an impetus: the enhanced limit of detection of sensors. There are several reviews on the detection of viruses and other proteins related to disease control point of care; however, to the best of our knowledge, none summarizes the various nucleotide sensors and describes their limits of detection and mechanisms. To understand the far-reaching impact of this discipline, we briefly discussed conventional and nanomaterial-based sensors, and then proposed the feature prospects of these devices. Two types of sensing mechanisms were further divided into their sub-branches: polymerase chain reaction and photospectrometric-based sensors. The nanomaterial-based sensor was further subdivided into optical and electrical sensors. The optical sensors included fluorescence (FL), surface plasmon resonance (SPR), colorimetric, and surface-enhanced Raman scattering (SERS), while electrical sensors included electrochemical luminescence (ECL), microfluidic chip, and field-effect transistor (FET). A synopsis of sensing materials, mechanisms, detection limits, and ranges has been provided. The sensing mechanism and materials used were discussed for each category in terms of length, collectively forming a fusing platform to highlight the ultrahigh detection technique of nucleotide sensors. We discussed potential trends in improving the fabrication of nucleotide nanosensors based on low-dimensional materials. In this area, particular aspects, including sensitivity, detection mechanism, stability, and challenges, were addressed. The optimization of the sensing performance and selection of the best sensor were concluded. Recent trends in the atomic-scale simulation of the development of Deoxyribonucleic acid (DNA) sensors using 2D materials were highlighted. A critical overview of the challenges and opportunities of deoxyribonucleic acid sensors was explored, and progress made in deoxyribonucleic acid detection over the past decade with a family of deoxyribonucleic acid sensors was described. Areas in which further research is needed were included in the future scope.

Au NP-Decorated g-C3N4-Based Photoelectochemical Biosensor for Sensitive Mercury Ions Analysis

Herein, an efficient and feasible photoelectrochemical (PEC) biosensor based on gold nanoparticle-decorated graphitic-like carbon nitride (Au NPs@g-C₃N₄) with excellent photoelectric performance was designed for the highly sensitive detection of mercury ions (Hg²⁺) . The proposed Au NPs@g-C₃N₄ was first modified on the surface of the electrode, which possessed a remarkable photocurrent conversion efficiency and could produce a strong initial photocurrent. Then, the thymine-rich DNA (S1) was immobilized on the surface of the modified electrode via Au-N bonds. Subsequently, 1-hexanethiol (HT) was added to the resultant electrode to block nonspecific binding sites. Finally, the target Hg²⁺ was incubated on the surface of the modified glassy carbon electrode (GCE). In the presence of target Hg²⁺, the thymine-Hg²⁺-thymine (T-Hg²⁺-T) structure formed due to the selective capture capability of thymine base pairs toward Hg²⁺, resulting in the significantly decrease of the photocurrent. Thereafter, the proposed PEC biosensor was successfully used for sensitive Hg²⁺ detection, as it possessed a wide linear range from 1 pM to 1000 nM with a low detection limit of 0.33 pM. Importantly, this study demonstrates a new method of detecting Hg²⁺ and provides a promising platform for the detection of other heavy metal ions of interest.

Ultrasensitive and Visual Electrochemiluminescence Ratiometry Based on a Constant Resistor-Integrated Bipolar Electrode for MicroRNA Detection

In this work, a new electrochemiluminescence (ECL) platform was constructed for detecting the prostate cancer marker microRNA-141 (miRNA-141) on a constant resistor-integrated closed bipolar electrode (BPE). It consisted of two reservoirs and a constant resistor, and both ends were connected to the anode of the driving electrode and the cathode of BPE. The cathode of BPE was modified with boron nitride quantum dots (BNQDs), and the anode reservoir was the [Ru(bpy)₃](PF₆)₂/TPrA system. After introducing a certain amount of hairpin DNA 3 (H3) and ferrocene-labeled single-stranded DNA (Fc-ssDNA) on the surface of the BNQDs, the ECL emission signal of the BNQDs was difficult to be observed by the naked eye, while [Ru(bpy)₃](PF₆)₂ emitted a strong and visible ECL signal. In the presence of the target, bipedal DNA assembled by catalytic hairpin assembly (CHA) took away the Fc-ssDNA and the ECL intensity of the BNQDs was enlarged, and as the concentration of miRNA-141 increased to the cutoff value, yellow-green light was visible by the naked eye. Meanwhile, the red emission signal of [Ru(bpy)₃](PF₆)₂/TPrA became weakened. Thus, an ultrasensitive "color switch" ECL biosensor for detection of miRNA-141 was constructed and endowed with a wide linear range from 10^-17 to 10^-7 M and a detection limit of 10^-17 M (S/N = 3). This study provides the potential for investigating portable devices in the detection of low-concentration nucleic acids.

Target-Induced In Situ Formation of Organic Photosensitizer: A New Strategy for Photoelectrochemical Sensing

Small-molecule photosensitizers have great application prospects in photoelectrochemical (PEC) sensing due to their defined composition, diversified structure, and adjustable photophysical properties. Herein, we propose a new strategy for PEC analysis based on the target-induced in situ formation of the organic photosensitizer. Taking thiophenol (PhSH) as a model analyte, we designed and synthesized a 2,4-dinitrophenyl (DNP)-caged coumarin precursor (Dye-PhSH), which was then covalently coupled onto the TiO₂ nanoarray substrate to obtain the working photoanode. Due to the intramolecular photoinduced electron transfer process, Dye-PhSH has only a very weak photoelectric response. Upon reacting with the target, Dye-PhSH undergoes a tandem reaction of the detachment of the DNP moiety and the intramolecular cyclization process, which leads to a coumarin dye with a pronounced photoelectric effect, thus achieving a highly selective turn-on PEC response to PhSH. For the first time, this study was to construct a PEC sensor by exploiting specific organic reactions for the in situ generation of small molecule-based photoactive material. It can be anticipated that the proposed strategy will expand the paradigm of PEC sensing and holds great potential for detecting various other analytes.

Photoelectrochemical aptasensor for sensitive detection of tetracycline in soil based on CdTe-BiOBr heterojunction: Improved photoactivity enabled by Z-scheme electron transfer pathway

Exploring effective methods for tetracycline (TC) detection in soil has great significance because of its emerging environmental problem and increasing threat to soil quality and general public health worldwide. In this work, a sensitive photoelectrochemical (PEC) aptasensor toward TC detection was designed and constructed based on an efficient photosensitive material of Z-scheme CdTe-BiOBr heterojunction. Due to the sensitization of CdTe quantum dots (QDs) on the BiOBr nanoflowers, the photocurrent intensity of the CdTe-BiOBr heterojunction was enhanced about 5.0-fold and 8.0-fold than that of pure BiOBr and CdTe under visible-light irradiation, which was attributed to the low electron-hole combination efficiency, high visible light utilization efficiency, and high carrier density of the heterojunction. On the merits of the excellent PEC activity of the CdTe-BiOBr and the specificity of the aptamer, the proposed PEC aptasensor has the advantages of satisfying linear range (from 10 to 1500 pM), low detection limit (9.25 pM), good selectivity, and reproducibility. In addition, acceptable accuracy was obtained for TC detection in real soil sample, giving acceptable accuracy in comparison with the referenced high-performance liquid chromatography-diode array detector method, revealing a promising avenue for accurate and ultrasensitive estimation of other kinds of contaminants in the broad field of analysis.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

MOF-derivated MnO@C nanocomposite with bidirectional electrocatalytic ability as signal amplification for dual-signal electrochemical sensing of cancer biomarker

Dual-signal strategy has great potential in improving the accuracy and sensitivity of cancer biomarker determination. However, most sensors based on nanomaterials as signal amplification usually output single detectable signal. It is still a challenge to achieve dual-signal sensing of biomarkers with nanomaterials as signal amplification. Herein, MnO@C nanocomposite was prepared with Mn-MOF-74 as precursor by pyrolysis. It possesses bidirectional electrocatalytic ability toward both oxidation and reduction of H₂O₂ for its fully exposed crystal facets. After loading AuNPs, MnO@C@AuNPs can connect aptamer (Apt) via Au-S and then as a signal amplification for the construction of sandwich-type aptasensor for dual-signal electrochemical sensing of cancer biomarker. Thus, taking mucin 1 (MUC1) as a model system. The aptasensor has the parallel output of differential pulse voltammetry (DPV) and chronoamperometry responses based on oxidation and reduction of H₂O₂, respectively, which implemented sensitive and accurate measurements to avoid false results. The linear response ranges of 0.001 nM-100 nM (detection limit of 0.31 pM) for DPV technique and 0.001 nM-10 nM (detection limit of 0.25 pM) for chronoamperometry technique were obtained. It opens up a new way to design elegant dual-signal aptasensors with potential applications in early disease diagnosis.

MOF@COF Heterostructure Hybrid for Dual-Mode Photoelectrochemical-Electrochemical HIV-1 DNA Sensing

We developed a novel metal-organic framework (MOF)@covalent-organic framework (COF) hybrid with a hierarchical nanostructure and excellent photoactivity, which further acted as the bifunctional platform of a dual-mode photoelectrochemical (PEC) and electrochemical (EC) biosensor for detecting HIV-1 DNA via immobilizing the HIV-1 DNA probe. First, the presynthesized Cu-MOF nanoellipsoids were used as the template for the in situ growth of the COF network, which was synthesized using copper-phthalocyanine tetra-amine (CoPc-TA) and 2,9-bis[p-(formyl)phenyl]-1,10-phenanthroline as building blocks through the Schiff base condensation. In view of the large specific surface area, abundant reserved amino group, excellent electrochemical activity, and high photoactivity, the obtained Cu-MOF@CuPc-TA-COF heterostructure not only can serve as the sensitive platform for anchoring the HIV-1 DNA probe strands but also can be utilized as the signal transducers for PEC and EC biosensors. Thereby, the constructed biosensor shows the sensitive and selective analysis ability toward the HIV-1 target DNA via the complementary hybridization between probe and target DNA strands. The dual-mode PEC and EC measurements revealed that the Cu-MOF@CuPc-TA-COF-based biosensor displayed a wide linear detection range from 1 fM to 1 nM and an extremely low limit of detection (LOD) of 0.07 and 0.18 fM, respectively. In addition, the dual-mode PEC-EC biosensor also demonstrated remarkable selectivity, high stability, good reproducibility, and preferable regeneration ability, as well as acceptable applicability, for which the detected HIV-1 DNA in human serum showed good consistency with real concentrations. Thereby, the present work can open a new dual-mode PEC-EC platform for detecting HIV-1 DNA based on the porous-organic framework heterostructure.

Highly Selective and Sensitive microRNA-210 Assay Based on Dual-Signaling Electrochemical and Photocurrent-Polarity-Switching Strategies

Highly sensitive and selective microRNA (miRNA) assay is of great significance for disease diagnosis and therapy. Herein, a magnetic-assisted electrochemistry (EC)-photoelectrochemistry (PEC) dual-mode biosensing platform was developed for miRNA-210 detection based on dual-signaling EC and photocurrent-polarity-switching PEC strategies. Porous magnetic Fe₃O₄ octahedra with a large surface area were synthesized by calcining Fe-based metal-organic frameworks. Subsequently, the magnetic photoelectric materials (Fe₃O₄@CdS) were developed by the successive ionic layer adsorption and reaction method in Cd²⁺ and S^2- solutions. Then, the self-assembled DNA nanoprisms contained three thiols/hanging arms that could capture miRNA-210 efficiently and were anchored to the Fe₃O₄@CdS octahedra via the Cd-S bond. When miRNA-210 was present, the double-stranded DNA concatemers [the self-assembled duplex helixes based on a pair of methylene blue (MB)-labeled single-stranded DNAs (AP1 and AP2) through the hybridization chain reaction and then intercalated with adriamycin (Dox) into their grooves] were connected with the Fe₃O₄@CdS-DNA nanoprisms. MB and Dox not only acted as the electrochemical probes but also synergistically switched the photocurrent polarity of the Fe₃O₄@CdS octahedra. Thus, miRNA-210 was assayed sensitively and selectively via the proposed EC-PEC dual-mode biosensing platform. Additionally, the abovementioned recognition steps occurred in a homogeneous system, and the effects of the impurities and interferences on the miRNA-210 assay could be easily avoided by magnetic separation due to the good magnetic properties of Fe₃O₄ octahedra. The proposed EC-PEC dual-mode biosensing platform showed a wide range of potential applications in bioanalysis and early diagnosis of disease.

"Dual-Signal-On" Integrated-Type Biosensor for Portable Detection of miRNA: Cas12a-Induced Photoelectrochemistry and Fluorescence Strategy

The abnormal expression of microRNA (miRNA) can affect the RNA transcription and protein translation, leading to tumor progression and metastasis. Currently, the accurate detection of aberrant expression of miRNA, particularly using a portable detection system, remains a great challenge. Herein, a novel dual-mode biosensor with high sensitivity and robustness for miR-21 detection was developed based on the cis-cleavage and trans-cleavage activities of Cas12a. miRNA can be combined with hairpin DNA-horseradish peroxidase anchored on a CdS/g-C₃N₄/B-TiO₂ photoelectrode, thus the nonenzymatic amplification was triggered to form numerous HRP-modified double-stranded DNA (HRP-dsDNA). Then, HRP-dsDNA can be specifically recognized and efficiently cis-cleaved by Cas12a nucleases to detach HRP from the substrate, while the remaining HRP on HRP-dsDNA can catalyze 4-chloro-1-naphthol (4-CN) to form biocatalytic precipitation (BCP) on the surface of the photoelectrode, and thus the photocurrent can be changed. Meanwhile, the trans-cleavage ability of Cas12a was activated, and nonspecifically degrade the FQ-reporter and a significant fluorescence signal can be generated. Such two different kinds of signals with independent transmission paths can mutually support to improve the performance of the detection platform. Besides, a portable device was constructed for the point-of-care (POC) detection of miR-21. Moreover, the dual-mode detection platform can be easily expanded for the specific detection of other types of biomarkers by changing the sequence of hairpin DNA, thereby promoting the establishment of POC detection for early cancer diagnosis.

Aptamer and bifunctional enzyme co-functionalized MOF-derived porous carbon for low-background electrochemical aptasensing

To improve the efficiency of aptasensors, a signal amplification strategy by coupling tyrosinase (Tyr)-triggered redox cycling with nanoscale porous carbon (NCZIF) has been proposed. The NCZIF was obtained by calcining ZIF-8 crystals in an inert atmosphere. It had high surface areas, great biocompatibility, and ease of functionalization, which was beneficial for immobilizing sufficient Tyr and aptamer covalently. When the target prostate-specific antigen (PSA) was present, the NCZIF functionalized with Tyr and an aptamer bound to the aptamer-modified Au electrode specifically through the sandwich structure. Then, Tyr acted to oxidize the electroinactive phenol, which led to low-background signal, in the substrate to electroactive catechol, and triggered the redox cycling under the action of NADH. The low detection limit of the proposed electrochemical aptasensor for PSA was 0.01 ng mL^-1, and the wide detection range was from 0.01 to 50 ng mL^-1. The use of ZIF-8 derived porous carbon and Tyr-triggered redox cycling system provided a promising solution for the development of simple, rapid, reliable, and low-background aptasensing methods, which had great potential in the field of disease diagnosis and biomedicine.

A dual-model "on-super off" photoelectrochemical/ratiometric electrochemical biosensor for ultrasensitive and accurate detection of microRNA-224

A dual-model "on-super off" photoelectrochemical (PEC)/ratiometric electrochemical (EC) biosensor based on signal enhancing and quenching combining three-dimensional (3D) DNA walker strategy was designed for the ultrasensitive and accurate detection of microRNA-224 (miRNA-224). The "signal on" PEC state was achieved by methylene blue labeled hairpin DNA (MB-DNA) for sensitizing CdS QDs. Then numerous transformational ferrocene labeled DNAs (Fc-DNAs) converted by target-induced 3D DNA walker amplification with the help of Ag nanocubes (NCs) label DNA (Ag-DNA) were introduced to open hairpin MB-DNA. Such configuration change would relocate the sensitizer MB and the quencher Fc, whereas energy transfer placed between Ag NCs and CdS QDs, thereby significantly quenching the PEC signal to obtain "super off" state. Meanwhile, these changes resulted in a decreased oxidation peak current of MB (I_MB) and an increased that of Fc (I_Fc). MiRNA-224 was also detected on basis of the dual-signaling EC ratiometric method for complementary PEC detection. Benefiting from different mechanisms and relatively independent signal transduction, this approach not only avoided interference from difficult assembly but also outstandingly increased sensitivity by distance-controllable signal enhancing and quenching strategies. As a result, the detection ranges of 0.1-1000 fM with a low detection limit of 0.019 fM for PEC, and 0.52 to 500 fM with a low detection limit of 0.061 fM for EC, were obtained for miRNA-224, which opens a new avenue for designing numerous elegant biosensors with potential utility in bioanalysis and early disease diagnosis.

"Dual Signal-On" Split-Type Aptasensor for TNF-α: Integrating MQDs/ZIF-8@ZnO NR Arrays with MB-Liposome-Mediated Signal Amplification

Ultrasensitive and accurate detection of biomarkers in serum is of great importance for disease diagnosis and treatment. So far, the commonly used single-mode signal suffers from certain instinct drawbacks that restrict assay performances. Herein, we report the proof-of-concept fabrication of a split-type photoelectrochemical (PEC) and electrochemical (EC) dual-modal aptasensor for ultrasensitively tracing tumor necrosis factor-α, a noteworthy biological biomarker with essential clinical importance. By smart integrating molybdenum disulfide QDs/zeolitic imidazolate framework-8@ZnO nanorod arrays with a methylene blue-liposome-mediated signal amplification strategy, "dual signal-on" detection is accomplished based on a sandwich reaction of the target with aptamer-anchored carboxyl magnetic beads and an aptamer-confined MB liposome. Linear ranges of 5 fg/mL-5 μg/mL (detection limit 1.46 fg/mL) for PEC and 10 fg/mL-0.5 μg/mL (detection limit 6.14 fg/mL) for EC are obtained, respectively. An independent signal transduction mechanism supports the accuracy improvement, and a separate biological process from a translator enables convenient fabrication, short-time consumption, wider linearity, as well as outstanding reproducibility and stability in practical application. This work presents a universal bioassay route with prospects in biomedical and related areas.

Sensitive Dual-Mode Biosensors for CYFRA21-1 Assay Based on the Dual-Signaling Electrochemical Ratiometric Strategy and "On-Off-On" PEC Method

Herein, an electrochemical (EC)-photoelectrochemical (PEC) dual-mode biosensor was constructed for cytokeratin 19 fragment 21-1 (CYFRA21-1) assay based on the dual-signaling electrochemical ratiometric strategy and "on-off-on" PEC method. The indium tin oxide (ITO) electrode was modified by 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA)@C₆₀ and gold nanoparticles (Au NPs), and the double-stranded DNA composed of thiol/methylene blue (MB)-labeled single-stranded DNA (ssDNA) (S0-MB) and antibody/ferrocene (Fc)-labeled ssDNA (Ab1-S1-Fc) was immobilized on the Au NPs/PTCDA@C₆₀/ITO electrode via the Au-S bond between Au NPs and thiol of S0-MB. With the help of another antibody-labeled ssDNA (Ab2-S2), the presence of CYFRA21-1 triggered a typical antigen-antibody sandwich immune reaction (Ab1, CYFRA21-1, and Ab2) and proximity hybridization between Ab1-S1-Fc and Ab2-S2. This caused the release of Ab1-S1-Fc from the modified electrode and the change of S0-MB to a hairpin structure, resulting in a decrease (an increase) of the oxidation peak current of Fc (MB) and an increase of the photocurrent due to the enhancing (inhibiting) effect of MB (Fc) on the photoelectric performance of the Au NPs/PTCDA@C₆₀/ITO electrode. Thus, CYFRA21-1 was detected by the developed EC-PEC dual-mode sensing platform sensitively, and the linear response ranges of 0.001-40 ng/mL with a detection limit of 0.3 pg/mL for the EC technique and 0.0001-4 ng/mL with a detection limit of 0.03 pg/mL for the PEC method were obtained. Furthermore, by changing the specific antibodies of disease-related biomarkers, the developed dual-mode biosensing platform could be readily extended to detect other antigens, implying its great potential applications in biological analysis and early disease diagnosis.

Rolling Circle Replication for Biosensing, Bioimaging, and Biomedicine

Rolling circle replication (RCR), including rolling circle amplification (RCA) and rolling circle transcription (RCT), is an isothermal enzymatic reaction. Because of its high amplification efficiency, RCR is a powerful biosensing tool for detecting biomolecules. In recent years, RCR has also been extended to the field of bioimaging to better understand biological pathways. Furthermore, RCR provides a simple technique to design and generate DNA/RNA structures with unique advantages in delivering drugs and enhanced targeting ability. In this review, we introduce the fundamentals of RCR and describe the most recent advances in RCR-based detection methods and delivery vehicles for biosensing, bioimaging, and biomedicine. Finally, some challenges and further opportunities of RCR-based biotechnology are discussed.

A signal amplification of p DNA@Ag2S based photoelectrochemical competitive sensor for the sensitive detection of OTA in microfluidic devices

In this work, a signal amplification competitive-type photoelectrochemical system comprised of bismuth sulfide/bismuth oxyiodide/zinc oxide (Bi₂S₃/BiOI/ZnO) nano-array as platform and Ag₂S-modified aptamers probe DNA (p DNA@Ag₂S) as competition content for rapid and sensitive detection of OTA in microfluidic devices. The BiOI nano-array was first growth on surfaces of ZnO by a simple electrodeposited method, which provided large specific surface area and high stability to solve distribution of sensing platform and loose of combination of sensing substrate. Then, the Bi₂S₃ could be in-situ growth by self-sacrificial part Bi³⁺ of BiOI to form heterojunction without destroying the structure of the nano-array. A strong photocurrent intensity was acquired by the Bi₂S₃/BiOI/ZnO modified onto indium tin oxide (ITO) electrode, due to its good matching cascade band-edge levels could improve efficient separation of photo-generated e^-/h⁺ pairs. After immobilizing with the capture DNA (c DNA) and the sequential hybridization of p DNA@Ag₂S, the photocurrent intensity reduced obviously because part photo-generated electron transformed to Ag₂S rather than Bi₂S₃/BiOI/ZnO electrode. Subsequently, the photocurrent intensity increased evident when immobilized the target OTA, owing to the OTA could bind the p DNA@Ag₂S to form the specific-complex that were released from the electrode surface. Under optimal conditions, the prepared PEC microfluidic sensor exhibited a linear concentration of OTA from 0.01 pg/mL to 200 ng/mL with a low detection limit of 0.0035 pg/mL (S/N = 3). Furthermore, it achieved high sensitivity, good specificity, and acceptable stability and further provided an efficient method for sensitive detection of other target mycotoxins in practical application.