In Situ Catalysis and Extraction Approach for Fast Evaluation of Heterogeneous Catalytic Efficiency

Mathematical model of ion chronogram from in-tube solid-phase microextraction device coupled with mass spectrometry and optimization framework

A mathematical description and experimental outputs exhibited that an ion chronogram from an in-tube solid-phase microextraction (SPME) device linked with mass spectrometry (in-tube-SPME-MS) generally appears as a right-skew unimodal signal with a heavy right tail. Analogous to liquid chromatography coupled with mass spectrometry (LC-MS), in-tube-SPME-MS can utilize the area under its produced ion chronogram for regression analysis and has been shown to be a potential approach for fast quantification of analyte. Different level of unimodity of signal in the ion chronogram could positively or negatively affect the choice of the area used for quantification and finally impact on analysis sensitivity and time efficiency of in-tube-SPME-MS. In the paper, we showed that different in-tube SPME design choices and elution experimental setups produce ion chronograms with controllable varying unimodal peak shape patterns. An improved mathematical model was built based on the plate theory of chromatography and the Van Deemter equation to quantitatively describe the elution process from in-tube-SPME device. A computer simulation was implemented to predict ion chronograms and the results were compared with experimental ion chronograms to show the effectiveness of the model. An optimization framework was further presented based on the model to identify optimal device designs (length and diameter of device) and experimental parameters (flow rate) to track targeted ion chronograms with "desired" peak shape patterns. Empirical elution experiments with the in-tube SPME devices adopting optimized geometric parameters and optimal experimental setups confirmed the consistency between the experimental ion chronograms and the numerical simulations to a certain level.

Quantitative Time-Resolved Visualization of Catalytic Degradation Reactions of Environmental Pollutants by Integrating Single-Drop Microextraction and Fluorescence Sensing

Current methods for evaluating catalytic degradation reactions of environmental pollutants primarily rely on chromatography that often suffers from intermittent analysis, a long turnaround period, and complex sample pretreatment. Herein, we propose a quantitative time-resolved visualization method to evaluate the progress of catalytic degradation reactions by integrating sample pretreatment [single-drop microextraction, (SDME)], fluorescence sensing, and a smartphone detection platform. The dechlorination reaction of chlorobenzene derivatives was first investigated to validate the feasibility of this approach, in which SDME plays a critical role in direct sample pretreatment, and inorganic CsPbBr₃ perovskite encapsulated in a metal-organic framework (MOF-5) was utilized as the fluorescent chromogenic agent (FLCA) in SDME to realize fast in situ colorimetric detection via the color switching from green (CsPbBr₃) to blue (chlorine lead bromide, inorganic CsPbCl₃ perovskite). The smartphone, which can calculate the B/G value of FLCA, serves as a data output window for quantitative time-resolved visualization. Further, a [Eu(PMA)]_n (PMA= pyromellitic acid) fluorescent probe was constructed to use as an FLCA for the in situ evaluation of cinnamaldehyde and p-nitrophenol catalytic reduction. This approach not only minimizes the utilization of organic solvents and achieves quantitively efficient time-resolved visualization but also provides a feasible method for in situ monitoring of the progress of catalytic degradation reactions.

Development of a novel porous cobalt, phosphorus and nitrogen co-doped carbonaceous coating by phosphiding ZIF-67 grown on nitinol fiber for selective solid-phase microextraction of polycyclic aromatic hydrocarbons from water samples

The nature and fabrication of the fiber coatings with good adsorption capacity and selectivity play a decisive role in solid-phase microextraction (SPME). In this work, a facile strategy was proposed to fabricate a cobalt, phosphorus and nitrogen co-doped carbonaceous (Co-P-NC) coating on superelastic nitinol (NiTi) substrate as a binder-free fiber for SPME. In particular, direct electrochemical in situ growth of ZIF-67 crystals served as the N-containing carbon precursor and sacrificial template for subsequent controllable conversion of ZIF-67 into a novel porous Co-P-NC coating on the NiTi wire substrate via a phosphiding process in a N₂ atmosphere. The obtained NiTi wire with the Co-P-NC coating (NiTi@Co-P-NC) was employed to investigate the adsorption of some representative aromatic analytes in water samples for the first time coupling with high-performance liquid chromatography with UV detection (HPLC/UV). The results proved that the resulting fiber showed superior adsorption selectivity for polycyclic aromatic hydrocarbons (PAHs). Therefore, the key parameters were further examined for the adsorption and preconcentration of PAHs. Under the obtained conditions, linear chromatographic responses were achieved over the concentration ranges of 0.03-100 μg L^-1 with the correlation coefficients ranging from 0.9980 to 0.9991. Limits of detection (LODs) were between 0.007 and 0.149 μg L^-1 (S/N = 3). The developed SPME-HPLC/UV method was applied to selective preconcentration and sensitive determination of PAHs in water. Moreover, this fiber had good fiber preparation reproducibility and presented 120 adsorption and desorption cycles at the same time in practical SPME application.

GaOOH-modified metal-organic frameworks UiO-66-NH2: Selective and sensitive sensing four heavy-metal ions in real wastewater by electrochemical method

Heavy metal pollution in the environment poses a serious threat to the ecosystem and human health, which has attracted widespread attention. In this study, an octahedral structure composite composed of UiO-66-NH₂ MOFs and semiconductor GaOOH materials has been prepared and used as electrode materials successfully. These composites can be used for the real-time and online determination of Cd²⁺, Cu²⁺, Hg²⁺, and Pb²⁺ in real water samples simultaneously or alone via an electrochemical method. Zr-MOF has a large and unique surface area that is beneficial to the adsorption and preconcentration of heavy metal ions. The experiment parameters such as pH, deposition potential, and deposition time were optimized. Under the optimized conditions, the electrochemical performances and practical applications of Zr-MOF composites modified electrode have been investigated, which shows excellent wider linear range and lower detection limit (LOD). The results demonstrated excellent selectivity, reproducibility, stability and applicability for the detection of four metal ions. These superior features stem from the synergistic reaction mechanism of UiO-66-NH₂ and GaOOH. In addition, it has been established a new detection strategy for heavy metal ions through the form of metal-organic framework (MOF) composite in this work. It may provide a novel platform for the quantitative determination of heavy metal ions in various environmental samples.

Polyaniline/titanium dioxide nanorods functionalized carbon fibers for in-tube solid-phase microextraction of phthalate esters prior to high performance liquid chromatography-diode array detection

To improve extraction performance of carbon fibers (CFs) towards phthalate esters (PAEs), titanium dioxide (TiO₂) nanorods array was in-situ grown on the surface of CFs, then polyaniline (PANI) was used to modify it. PANI/TiO₂ nanorods-CFs were placed into a polyetheretherketone tube for solid-phase microextraction (SPME). Combining the tube to high performance liquid chromatography (HPLC), it was evaluated and displayed good extraction performance for several PAEs. Compared with bare CFs, TiO₂ nanorods and PANI, PANI/TiO₂ nanorods presented best performance, attributed to the unique advantages between high surface area of TiO₂ nanorods and multiple adsorption interactions (like π-π stacking, hydrogen bond) of PANI. After the optimization of the important factors (sampling volume, sampling rate, sample pH, concentrations of organic solvent and salt in sample, and desorption time), the online in-tube SPME-HPLC method was established. It provided low limits of detection (0.01-0.05 μg L^-1) and wide linear ranges (0.03-30, 0.10-30, 0.17-30 μg L^-1) with correlation coefficients larger than 0.9991. The relative standard deviations (n=6) between intra-day and inter-day tests were in the ranges of 3.5-10.3% and 4.7-13.9%, respectively. The method was successfully used to determine seven PAEs in real water samples. Besides of satisfactory durability, the material also exhibited superior extraction performance than some materials.

Application of Covalent Organic Porous Polymers-Functionalized Basalt Fibers for in-Tube Solid-Phase Microextraction

To establish an online analytical method towards estrogenic pollutants, a covalent organic porous polymer (COP) was in-situ synthesized on the surface of basalt fibers (BFs) for in-tube solid-phase microextraction (IT-SPME). The extraction tube, obtained via placing the modified BFs into a polyetheretherketone tube, was combined with high-performance liquid chromatography (HPLC) to achieve online IT-SPME-HPLC analysis. The important parameters, including sampling volume, sampling rate, organic solvent content and desorption time, were carefully investigated. Under the optimized conditions, the online analytical method was established for five estrogenic targets, with low limits of detection (0.001–0.005 μg/L), high enrichment factors (1800–2493), wide linear ranges (0.003–20, 0.015–20 μg/L) and satisfactory repeatability. It was successfully applied to detect five estrogens in a wastewater sample and a water sample in a polycarbonate cup. The BFs functionalized with COPs displayed excellent extraction effect for estrogenic pollutants, furthermore it has great potential in sample preparation or other fields.

Application of biocharcoal aerogel sorbent for solid-phase microextraction of polycyclic aromatic hydrocarbons in water samples

A facile method was introduced for preparing a biocharcoal aerogel, which was derived from pomelo peel as the only raw material. The inner spongy layer of pomelo peel was freeze-dried for maintaining three-dimensional structure and then carbonized under high temperature and oxygen-limited conditions. The morphological structure and graphitization degree of biocharcoal aerogel were characterized using a scanning electron microscope and Raman spectrum. After sifting and grinding, the biocharcoal aerogel as an adsorbent was coated onto the surface of stainless steel wires. Through placing the wires into a polyetheretherketone tube, the in-tube solid-phase microextraction device was obtained. Coupled with high-performance liquid chromatography, it exhibited good extraction performance for polycyclic aromatic hydrocarbons, then an online analytical method was established with low limits of detection (0.005-0.050 ng/mL), wide linear ranges (0.017-15 ng/mL) with superior correlation coefficients higher than 0.9990, high enrichment factors (1128-3425), and acceptable intra- and inter-day repeatabilities (relative standard deviations ≤ 6.7%, n = 3). The method was applied to detect polycyclic aromatic hydrocarbons in bottled water samples, environmental water samples, and soft drinks with satisfactory recoveries (83.3-120.9%). This research not only developed a new carbon aerogel but also evaluated its adsorption performance in sample preparation.