Electrogenerated Chemiluminescence Immunoassays on Nanoelectrode Ensembles Platform with Magnetic Microbeads for the Determination of Carbohydrate Antigen

Automatic Electrochemiluminescence Method for the Detection of Cancerous Exosomes Incorporating Specific Aptamer-Magnetic Beads and Signal Nanoprobes

Exosomes, as an emerging biomarker, have exhibited remarkable promise in early cancer diagnosis. Here, a highly sensitive, selective, and automatic electrochemiluminescence (ECL) method for the detection of cancerous exosomes was developed. Specific aptamer-(EK)4 peptide-tagged magnetic beads (MBs-(EK)4-aptamer) were designed as a magnetic capture probe in which the (EK)4 peptide was used to reduce the steric binding hindrance of cancerous exosomes with a specific aptamer. One new universal ECL signal nanoprobe (CD9 Ab-PEG@SiO2ϵRu(bpy)32+) was designed and synthesized by using microporous SiO2 nanoparticles as the carrier for loading ECL reagent Ru(bpy)32+, polyethylene glycol (PEG) layer, and anticluster of differentiation 9 antibody (CD9 Ab). A "sandwich" biocomplex was formed on the surface of the magnetic capture probe after mixing the capture probe, target exosomes, and ECL signal nanoprobe, and then it was introduced into an automated ECL analyzer for rapid and automatic ECL measurement. It was found that the designed signal nanoprobe shows a 270-fold improvement in the signal-to-noise ratio than that of the ruthenium complex-labeled CD9 antibody signal probe. The relative ECL intensity was proportional to MCF-7 exosomes as a model in the range of 102 to 104 particle/μL, with a detection limit of 11 particle/μL. Furthermore, the ECL method was employed to discriminate cancerous exosomes based on fingerprint responses using the designed multiple magnetic capture probes and the universal ECL signal nanoprobe. This work demonstrates that the utilization of a designed automated ECL tactic using the MBs-(EK)4-aptamer capture probe and the CD9 Ab-PEG@SiO2ϵRu(bpy)32+ signal nanoprobe will provide a unique and robust method for the detection and discrimination of cancerous exosomes.

Ultrasensitive miRNA Detection Based on Magnetic Upconversion Nanoparticle Enhancement and CRISPR/Cas13a-Driven Signal Amplification

MicroRNAs (miRNAs), a class of small molecules with important regulatory functions, have been widely used in the field of biosensing as biomarkers for the early diagnosis of various diseases. Therefore, it is crucial to develop an miRNA detection platform with high sensitivity and specificity. Here, we have designed a CRISPR/Cas13-based enzymatic cyclic amplification system and regarded the magnetic upconversion nanoparticles (MUCNPs) as a biosensor of outputting the detection signal for the highly sensitive and high-fidelity detection of miRNAs. MUCNPs were composed of UCNPs (fluorescence donors) and Fe3O4@AuNPs (fluorescence acceptors) through double-stranded DNA hybrid coupling. The target miRNA acted as an activator, which could activate the trans-cleavage activity of Cas13a to the well-designed Trigger containing two uracil ribonucleotides (rU) in its loop and trigger a strand displacement reaction to generate a large amount of single-stranded DNA, resulting in the release of the UCNPs from MUCNPs. Benefiting from the high fidelity and high selectivity of CRISPR/Cas13a, the great effect of triggered enzymatic cycle amplification, and the high-intensity luminescent signal of MUCNPs, this method possessed miRNA detection capability with high sensitivity and specificity even in the complex environment with 10% fetal bovine serum (FBS) and a serum sample. Meanwhile, the detection limit could be as low as 83.2 fM. In addition, this method effectively reduced the effect of photobleaching and maintained high stability, which was expected to achieve efficient and sensitive miRNA detection.

Washing-free electrogenerated chemiluminescence magnetic microbiosensors based on target assistant proximity hybridization for multiple protein biomarkers

This work reports washing-free electrogenerated chemiluminescence (ECL) magnetic microbiosensors based on target assistant proximity hybridization (TAPH) for multiple protein biomarkers for the first time. As a principle-of-proof, alpha-fetoprotein (AFP) was chosen as a model analyte, and biotin-DNA1 bound streptavidin-coated magnetic microbeads (MMB@SA⋅biotin-DNA1) were designed as the universal capture MMB, while the corresponding two antibodies tagged with DNA2 or DNA3 were utilized as hybrid recognition probes, and ruthenium complex-tagged DNA4-10A was designed as a universal ECL signal probe. When the capture MMB was added into the mixture solution (containing the analyte, hybrid recognition probes, signal probe and tri-n-propylamine), biocomplexes were formed on the MMB. After the resulting MMB was efficiently brought to the surface of a magnetic glassy carbon electrode (MGCE), ECL measurement was performed without a washing step, resulting in an increase in the ECL intensity. A model for ECL measuring the second-order rate constants of hybridization reactions on MMB was derived. It was found that the rate constants for hybridization reactions on MMB in rotating mode are 1.6-fold higher than those in shaking mode, and a suitable DNA length of the signal probe can improve the signal-to-noise ratio. The washing-free ECL method was developed for the determination of AFP with a much lower detection limit (LOD) of 0.04 ng mL^-1. The developed flexible strategy has been extended to determine D-dimer with an LOD of 0.1 ng mL^-1 and myoglobinglobin with an LOD of 1.1 ng mL^-1. This work demonstrated that the proposed strategy of ECL TAPH on MMB at MGCE is a washing-free and flexible promising strategy, and can be extended to qualify other multiple protein biomarkers in real clinical assays.

Highly sensitive photoelectrochemical immunosensor for detecting cancer marker CA19-9 based on a new SnSe quantum dot

A sandwich-type photoelectrochemical (PEC) immunosensor was constructed on a screen-printed electrode (SPE) using gold-coated tin selenide quantum dots (Au-SnSe QDs) to determine the carbohydrate antigen 19 9 (CA19-9). Water-soluble Au-SnSe QDs were prepared by coating low-cost SnSe QDs, prepared by reacting tin(II) 2-ethyl hexanoate with selenium ions (HNaSe) without needing to add an external capping agent (SnSe QDs). SnSe-based QDs were characterized using high-resolution transmission electron microscopy (HR-TEM) and dynamic light scattering (DLS). DSP (dithio-bis (succinimidyl propionate)) as a linker was attached on Au@SnSe QDs and conjugated with CA19-9 monoclonal antibodies (Ab₂-DSP-Au@SnSE QD). For capture probe assembling, an Au nano-layer was electrochemically deposited on a SPE by HAuCl₄ reduction using 12 cycles of cyclic voltammetry (0 to - 1.4 V) at the scan rate of 50 mV s^-1, then covered by self-assembly of DSP and covalent conjugation of CA19-9 Ab₁. Our developed PEC immunosensor showed a significant photoelectrochemical response, recorded using chronoamperometry (0.3 V), for the presence of CA19-9 antigen in serum samples under light irradiation, with a detection limit (LOD) of 0.0011 U mL^-1 and a dynamic range of 0.005-100 U mL^-1. The recovery of CA19-9 determination from serum samples was 101 to 113%.

Recent advances and challenges in developing electrochemiluminescence biosensors for health analysis

This Feature Article simply introduces principles and mechanisms of electrochemiluminescence (ECL) biosensors for the determination of biomarkers and highlights recent advances of ECL biosensors on key aspects including new ECL reagents and materials, new biological recognition elements, and emerging construction biointerfacial strategies with illustrative examples and a critical eye on pitfalls and discusses challenges and perspectives of ECL biosensors for health analysis.

Performance enhancement of electrochemiluminescence magnetic microbiosensors by using double magnetic field actuation for cancer biomarkers and exosomes

This work reports the performance enhancement strategies on magnetic beads (MBs)-based electrochemiluminescence (ECL) platforms by using double magnetic field actuation of the ECL magnetic microbiosensors (MMbiosensors) for highly sensitive determination of cancer biomarker and exosomes. To obtain the high sensitivity and reproducibility of the ECL MMbiosensors, a series of strategies have been developed including replacing a conventional photomultiplier tube (PMT) with a diamagnetic PMT, replacing the stacked ring-disc magnets with circular-disc magnets lain-in glassy carbon electrode, adding a pre-concentration process of MBs using external magnet actuation. For fundamental research, the ECL MBs taken as the substitute of ECL MMbiosensors were prepared by binding biotinylated DNA tagged with Ru(bpy)₃²⁺ derivative (Ru1) to streptavidin-coated MB(MB@SA) were which showed that the developed strategies can enhance 45-fold sensitivity. Importantly, the developed MBs-based ECL platform was estimated by determination of prostate specific antigen (PSA) and exosomes. For PSA, MB@SA•biotin-Ab1(PSA) was taken as the capture probe and Ru1-labeled Ab2 (PSA) was done as ECL probe, while for exosomes, MB@SA•biotin-aptamer (CD63) was taken as the capture probe and Ru1-labeled Ab (CD9) was done as the ECL probe. The experiment results showed that the developed strategies can enhance 33-fold sensitivity of ECL MMbiosensors for PSA and exosomes. The detection limit is 0.28 ng mL^-1 for PSA and 4.9 × 102 particle mL-1 for exosomes. This work demonstrated that a series of proposed magnetic field actuation strategies greatly increase the sensitivity of the ECL MMbiosensors. The developed strategies can be expanded to MBs-based ECL and electrochemical biosensors for clinical analysis with greater sensitivity.

Ultra-fast Redox Pulse for Stable Electrochemiluminescence on AuNP-Based Biosensors and Mechanism Investigation

A novel sandwich-type biosensor denoted as "MIP-analyte-Ab" was constructed on a glassy carbon electrode modified with gold nanoparticles (AuNPs@GCE), which is dedicated to explore a general solution for electrochemical tests in a relatively high potential range on Au electrodes. In particular, parasitic reactions of Au oxidation severely hindered the electrochemiluminescence (ECL) reactions of the Ru(bpy)₃²⁺/tripropylamine (TPrA) system. In this work, we designed an ultra-fast redox pulse to alleviate reversible oxidation of Au with a potential range of -0.5 to 0.9 V. Stable ECL signals were generated in the last 3 ms of each run (RSD = 5.86%), and interesting mechanisms were revealed. The ultra-high-frequency sampler indicated that free diffusion of TPrA^•+ was the rate-determining step at 0.9 V, and it followed a totally different route with ECL at 1.3 V. Furthermore, we proposed a particular ECL reaction route at 0.9 V with C5 desosamine of the analyte, azithromycin, involved for the first time, based on results of radical identification. We believe that our work paved the way for the application of Au-based sandwich-type biosensors in environmental monitoring.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Sonochemiluminescence Using Apertureless USB Piezoelectric Ultrasonic Transducer and Its Applications for the Detection of Hydrogen Peroxide, Glucose, and Glucose Oxidase Activity

The mesh-type USB piezoelectric ultrasonic transducer (USB-PUT) used in household humidifiers and inhalation therapy devices is very cheap, small, and energy saving. It holds great promise for sonochemistry. However, the microtapered apertures in the center of the stainless steel substrate of mesh-type USB-PUT can lead to rapid atomization of solution, leakage of solutions containing surfactants and organic solvent through the apertures, and high background emission. Herein, we design a new type of USB-PUT by replacing the meshed stainless steel substrate with an apertureless stainless steel substrate. We have found that this apertureless USB-PUT can not only induce intense sonochemiluminescence (SCL) but can also enable sensitive luminol SCL detection of hydrogen peroxide which is practically impossible using mesh-type PUT because of the strong background SCL emission. By using this apertureless device to induce SCL and using smart phone as a detector, a visual hydrogen peroxide SCL detection method with a linear range of 0.5-50 μM and a detection limit of 0.32 μM is established. Moreover, the device can achieve the detection of glucose oxidase (GOD) activity and glucose by enzymatic conversion of glucose to hydrogen peroxide. The linear range of GOD detection is 1-200U/L with a detection limit of 0.86 U/L. The linear range of glucose detection is 0.5-70 μM with a detection limit of 0.43 μM. The cheap (a few dollars) and user-friendly apertureless USB-PUT is promising for sonochemistry applications and chemical education.

Electrochemiluminescence of water-dispersed nitrogen and sulfur doped carbon dots synthesized from amino acids

A facile one-pot hydrothermal approach for synthesizing water-dispersed nitrogen and sulfur doped carbon dots (NS-CDs) with high luminescence quantum yield was explored, using cysteine and tryptophan as precursors. The NS-CDs were characterized by means of FT-IR spectroscopy, XRD, TEM, etc. It was found that the absolute photoluminescence quantum yield (QY) of the NS-CDs determined with an integrating sphere can reach up to 73%, with an average decay time of 17.06 ns. Electrochemiluminescence (ECL) behaviors and mechanisms of the NS-CDs/K₂S₂O₈ coreactant system were investigated. When the working electrode was modified with the prepared NS-CDs, the ECL efficiency of the NS-CDs with K₂S₂O₈ was 24%, relative to Ru(bpy)₃Cl₂/K₂S₂O₈. This work shows great potential for the NS-CDs to be used in bioanalytical applications.

Signal Amplification Strategy Using Atomically Gold-Supported VO2 Nanobelts as a Co-reaction Accelerator for Ultrasensitive Electrochemiluminescent Sensor Construction Based on the Resonance Energy Transfer Platform

Luminol, as a classical luminophore, plays a crucial role in electrochemiluminescence (ECL). However, the traditional luminol-H₂O₂ ECL system suffers from the self-decomposition of H₂O₂ at ambient temperature, which hinders its further application in quantitative analysis. In this work, for the first time, we developed atomically gold-supported two-dimensional VO₂ nanobelts (Au/VO₂) as an advanced co-reaction promoter to speed up the reduction of dissolved oxygen to superoxide radicals (O₂^•-), which react with the luminol anion radical and greatly promote the ECL emission. The ECL resonance energy transfer (ECL-RET) between the hollow manganese dioxide nanospheres and luminol results in a conspicuously decreased ECL signal response, and in the presence of glutathione (GSH), effective redox reaction between manganese dioxide and GSH restores the ECL signal. As a consequence, the designed sensor based on ECL-RET-assisted Au/VO₂ signal amplification showed outstanding performance for "signal-on" detection of GSH in the concentration range of 10^-3 to 10^-10 M, and the detection limit was as low as 0.03 nM. The ECL sensor displayed excellent specificity and was successfully utilized to target GSH in real human serum samples. Importantly, this work not only highlights a powerful avenue for constructing an ultrasensitive ECL sensor for GSH but also provides some inspiration for the further design of high-performance co-reaction accelerators using the ECL technique.