Red-Emitting Carbon Nanodot-Based Wide-Range Responsive Nanothermometer for Intracellular Temperature Sensing

Innovative detection mechanism for deltamethrin based on a dual-emitting Fluoroprobe and its application in a smartphone-based photoelectric conversion device

Pyrethroids are widely used insecticides worldwide, while their on-site and rapid detection still faces technological challenges. Herein, an innovative detection mechanism was designed for deltamethrin, a typical kind of type II pyrethroids, based on a dual-emitting fluoroprobe consisting of NH2-SiQDs and Eu3+. Deltamethrin can rapidly hydrolyze into 3-phenoxybenzaldehyde (3-PBD) and react specifically with fluoroprobe, causing fluorescence quenching of SiQDs while maintaining the fluorescent stability of Eu3+. Building upon the above fluorescence-responsive principle, SiQDs@Eu3+ provided satisfactorily dual-emitting signals, realizing the highly-selective and sensitive detection of deltamethrin. Correlation between the surface structure of SiQDs and their absorption spectra was in-depth unraveled by TD-DFT calculation and FT-IR analysis. As for the analytical performance, the recovery and LOD of deltamethrin in lettuce, provided by SiQDs@Eu3+, were comparable or even superior over conventional chromatographic analysis. Meanwhile, an innovative smartphone-based optical device was developed, which greatly decreased errors caused by the previously reported smartphone-based fluorescence detection.

Orange carbon dots based smart sensing platforms for rapid, visual, quantitative identification of sodium copper chlorophyllin

A highly affordable, sensitive and portable detection platform for the quantitative identification of sodium copper chlorophyllin (SCC) in food and environment is a crucial need. Even though many carbon dots (CDs) based sensors have been developed, few reports on using CDs as optical probes for SCC detection have been published so far. In this paper, orange luminescent CDs (OLCDs) were prepared via solvothermal method, which have high fluorescence quantum yield (27.20 %) and excellent photostability. OLCDs can detect SCC via inner filter effect (IFE), with fast response, high selectivity, outstanding sensitivity and superior anti-interference ability. Benefiting from the remarkable properties of OLCDs, a portable sensing platform was triumphantly constructed, which facilitated the in situ, real-time quantitative determination of SCC in diverse actual samples, by catching the fluorescence change of OLCDs-based paper sensors via smartphone RGB colorimetric analysis. This first CDs-based smart sensing system displays great potential for quantification of SCC in various fields.

Chiral carbon dots derived from tryptophan and threonine for enantioselective sensing of L/D-Lysine

Presently, most fluorescent probes for amino acid enantiomers detection require metal ions participation, which greatly increases the detection steps and costs, and affects the accuracy of detection results. To solve this problem, a dual pattern recognition sensor of chiral carbon dots (L-Try-Thr-CDs) with a quantum yield of 36.23 % was prepared by a one-step solvothermal method for the highly selective detection of lysine (Lys) enantiomers. Under optimal experimental conditions, the fluorescence and circular dichroism (CD) signals of the obtained L-Try-Thr-CDs could rapidly and effectively responded to L-Lys with limits of detection (LOD) of 16.51 nM and 24.38 nM, respectively, much lower than previously reported sensors. Importantly, the L-Try-Thr-CDs as a dual-mode sensor could not only detect amino acid enantiomers and simplify the steps, but also avoid inaccurate detection results due to unstable metal ions. Furthermore, the L-Try-Thr-CDs could detect L-Lys in living cells via a fluorescence microscope because of their excellent fluorescence characteristics and low toxicity. These results indicated that the dual-mode sensor not only provided a practical strategy for the design of new fluorescent probes, but also possessed outstanding application prospects in the accurate detection of lysine enantiomers.

Luminescence Thermometry with Nanoparticles: A Review

Luminescence thermometry has emerged as a very versatile optical technique for remote temperature measurements, exhibiting a wide range of applicability spanning from cryogenic temperatures to 2000 K. This technology has found extensive utilization across many disciplines. In the last thirty years, there has been significant growth in the field of luminous thermometry. This growth has been accompanied by the development of temperature read-out procedures, the creation of luminescent materials for very sensitive temperature probes, and advancements in theoretical understanding. This review article primarily centers on luminescent nanoparticles employed in the field of luminescence thermometry. In this paper, we provide a comprehensive survey of the recent literature pertaining to the utilization of lanthanide and transition metal nanophosphors, semiconductor quantum dots, polymer nanoparticles, carbon dots, and nanodiamonds for luminescence thermometry. In addition, we engage in a discussion regarding the benefits and limitations of nanoparticles in comparison with conventional, microsized probes for their application in luminescent thermometry.

Current and future technologies for monitoring cultured meat: A review

The high population growth rate, massive animal food consumption, fast economic progress, and limited food resources could lead to a food crisis in the future. There is a huge requirement for dietary proteins including cultured meat is being progressed to fulfill the need for meat-derived proteins in the diet. However, production of cultured meat requires monitoring numerous bioprocess parameters. This review presents a comprehensive overview of various widely adopted techniques (optical, spectroscopic, electrochemical, capacitive, FETs, resistive, microscopy, and ultrasound) for monitoring physical, chemical, and biological parameters that can improve the bioprocess control in cultured meat. The methods, operating principle, merits/demerits, and the main open challenges are reviewed with the aim to support the readers in advancing knowledge on novel sensing systems for cultured meat applications.

Comprehensive advances in the synthesis, fluorescence mechanism and multifunctional applications of red-emitting carbon nanomaterials

Red emitting fluorescent carbon nanomaterials have drawn significant scientific interest in recent years due to their high quantum yield, water-dispersibility, photostability, biocompatibility, ease of surface functionalization, low cost and eco-friendliness. The red emissive characteristics of fluorescent carbon nanomaterials generally depend on the carbon source, reaction time, synthetic approach/methodology, surface functional groups, average size, and other reaction environments, which directly or indirectly help to achieve red emission. The importance of several factors to achieve red fluorescent carbon nanomaterials is highlighted in this review. Numerous plausible theories have been explained in detail to understand the origin of red fluorescence and tunable emission in these carbon-based nanostructures. The above advantages and fluorescence in the red region make them a potential candidate for multifunctional applications in various current fields. Therefore, this review focused on the recent advances in the synthesis approach, mechanism of fluorescence, and electronic and optical properties of red-emitting fluorescent carbon nanomaterials. This review also explains the several innovative applications of red-emitting fluorescent carbon nanomaterials such as biomedicine, light-emitting devices, sensing, photocatalysis, energy, anticounterfeiting, fluorescent silk, artificial photosynthesis, etc. It is hoped that by choosing appropriate methods, the present review can inspire and guide future research on the design of red emissive fluorescent carbon nanomaterials for potential advancements in multifunctional applications.

Zero-Dimensional Carbon Nanomaterials for Fluorescent Sensing and Imaging

Advances in nanotechnology and nanomaterials have attracted considerable interest and play key roles in scientific innovations in diverse fields. In particular, increased attention has been focused on carbon-based nanomaterials exhibiting diverse extended structures and unique properties. Among these materials, zero-dimensional structures, including fullerenes, carbon nano-onions, carbon nanodiamonds, and carbon dots, possess excellent bioaffinities and superior fluorescence properties that make these structures suitable for application to environmental and biological sensing, imaging, and therapeutics. This review provides a systematic overview of the classification and structural properties, design principles and preparation methods, and optical properties and sensing applications of zero-dimensional carbon nanomaterials. Recent interesting breakthroughs in the sensitive and selective sensing and imaging of heavy metal pollutants, hazardous substances, and bioactive molecules as well as applications in information encryption, super-resolution and photoacoustic imaging, and phototherapy and nanomedicine delivery are the main focus of this review. Finally, future challenges and prospects of these materials are highlighted and envisaged. This review presents a comprehensive basis and directions for designing, developing, and applying fascinating fluorescent sensors fabricated based on zero-dimensional carbon nanomaterials for specific requirements in numerous research fields.

Red emissive carbon dots: a promising next-generation material with intracellular applicability

The accidental discovery of carbon dots (CDs) back in 2004 has led to their widespread use in the biomedical field. CDs have demonstrated their effectiveness in reporting 3D structures of biological specimens, identifying normal and cancer cells, and even detecting analytes within cells. However, the limitations of blue-green emitting CDs, such as their shallow penetration, photodamage, and auto-fluorescence, have hindered their practical applications. To overcome these limitations, red emissive CDs (RCDs) have been developed, which have deep tissue penetration, minimal photo-damage, low auto-fluorescence, and high imaging contrast. In this article, we present a thorough review on the use of RCDs in biomedical applications, including in vivo and in vitro bioimaging, photoacoustic imaging, monitoring temperature and polarity changes in living cells, tumour therapy, and drug delivery. With the rapid progress being made in the development of RCDs for intracellular applications, their clinical application is expected to become a reality in the near future.

Quantitative 3D Temperature Rendering of Deep Tumors by a NIR-II Reversibly Responsive W-VO2@PEG Photoacoustic Nanothermometer to Promote Precise Cancer Photothermal Therapy

Accurately monitoring the three-dimensional (3D) temperature distribution of the tumor area in situ is a critical task that remains challenging in precision cancer photothermal (PT) therapy. Here, by ingeniously constructing a polyethylene glycol-coated tungsten-doped vanadium dioxide (W-VO2@PEG) photoacoustic (PA) nanothermometer (NThem) that linearly and reversibly responds to the thermal field near the human-body-temperature range, the authors propose a method to realize quantitative 3D temperature rendering of deep tumors to promote precise cancer PT therapy. The prepared NThems exhibit a mild phase transition from the monoclinic phase to the rutile phase when their temperature grows from 35 to 45 °C, with the optical absorption sharply increased ∼2-fold at 1064 nm in an approximately linear manner in the near-infrared-II (NIR-II) region, enabling W-VO2@PEG to be used as NThems for quantitative temperature monitoring of deep tumors with basepoint calibration, as well as diagnostic agents for PT therapy. Experimental results showed that the temperature measurement accuracy of the proposed method can reach 0.3 °C, with imaging depths up to 2 and 0.65 cm in tissue-mimicking phantoms and mouse tumor tissue, respectively. In addition, it was verified through PT therapy experiments in mice that the proposed method can achieve extremely high PT therapy efficiency by monitoring the temperature of the target area during PT therapy. This work provides a potential demonstration promoting precise cancer PT therapy through quantitative 3D temperature rendering of deep tumors by PA NThems with higher security and higher efficacy.

Accurate Visualization of Metabolic Aberrations in Cancer Cells by Temperature Mapping with Quantum Coherence Modulation Microscopy

Specific metabolic aberrations of cancer cells rapidly generate energy with a minuscule but detectable temperature variation, which is a typical characteristic providing insight into cancer pathogenesis. However, to date, intracellular temperature mapping of cancer cell metabolism with high temporal and spatial resolution has not been realized. In this study, we mapped and monitored in real-time the intracellular temperature variations of mitochondria and cytoplasm at a subcellular scale via a single-molecule coherent modulation microscopy coupling targeted molecule labeling technique. According to the variation of the decoherence processes of targeted molecules as a function of intracellular temperature, we achieved a high temperature resolution (<0.1 K) and proved that this technique could eliminate interference from fluorescence intensity disturbance and external pH change. Furthermore, we showed a positive correlation between the determined temperature and the adenosine triphosphate production rate of mitochondrial metabolism in combination with a cell energy metabolic analyzer. This technology enables accurate real-time temporal and spatial visualization of cancer metabolism and establishes diagnoses and therapies for cancer.

Water-Soluble Cationic Eu3+-Metallopolymer with High Quantum Yield and Sensitivity for Intracellular Temperature Sensing

Lanthanide-based (Ln³⁺) luminescent materials are ideal candidates for use in fluorescence intracellular temperature sensing. However, it remains a great challenge to obtain a Ln³⁺-ratiometric fluorescence thermometer with high sensitivity and quantum yield in an aqueous environment. Herein, a cationic Eu³⁺-metallopolymer was synthesized via the coordination of Eu(TTA)₃·2H₂O with an AIE active amphipathic polymer backbone that contains APTMA ((3-acrylamidopropyl) trimethylammonium) and NIPAM (N-isopropylacrylamide) units, which can self-assemble into nanoparticles in water solution with APTMA and NIPAM as the hydrophilic shell. This polymer exhibited highly efficient dual-emissive white-light emission (Φ = 34.3%). Particularly, when the temperature rises, the NIPAM units will transform from hydrophilic to hydrophobic in the spherical core of the nanoparticle, while the VTPE units are moved from inside the nanoparticle to the shell, activating its nonradiative transition channel and thereby decreasing its energy transfer to Eu³⁺ centers, endowing the Eu³⁺-metallopolymer with an extremely high temperature sensing sensitivity within the physiological temperature range. Finally, the real-time monitoring of the intracellular temperature variation is further conducted.

Intramolecular hydrogen bond-tuned thermal-responsive carbon dots and their application to abnormal body temperature imaging

A steric hindrance strategy was used to prepare intramolecular hydrogen bond-controlled thermosensitive fluorescent carbon dots (CDs) via the solvothermal treatment of o-phenylenediamine respectively with three dihydroxybenzene isomers. The CDs obtained from different isomers have very similar morphology, surfaces, and photophysical properties but exhibited different thermal sensitivities. Meanwhile, the orange-emitting CDs (p-CDs) obtained from o-phenylenediamine and p-hydroquinone exhibited an optimal thermal sensitivity of 1.1%/°C. Comprehensive experimental characterizations and theoretical calculations revealed that even a small difference in substituent locations in the phenyl ring of the precursors can considerably affect the formation of intramolecular hydrogen bonds and that the CDs with strong intramolecular hydrogen bonds exhibited poor thermosensitivity. The p-CDs were incorporated with reference CDs (B-CDs) that exhibited heating-quenching blue emission through electrostatic self-assembly to construct a dual-emission probe (p-CDs/B-CDs), which exhibited a thermal sensitivity of 2.0%/°C. Test strips based on the p-CDs/B-CDs were prepared to measure temperature fluctuations based on sensitive and instant fluorescence color evolution. Further, this fluorescent colorimetry was successfully applied to a test strip-integrated wearable wristband to measure the body temperature. This study establishes an inherent relationship between precursors and the resulting intramolecular hydrogen bonds for precisely tuning the thermal sensitivity of CDs. It also offers a visual quantitative strategy for the early warning of abnormal body temperatures.

Circularly Polarized Luminescence of Achiral Carbon Dots in Bi-Solvent Systems Triggered by Supramolecular Self-Assembly

An innovative strategy for circularly polarized luminescence (CPL) of carbon dots (CDs) has been developed: The achiral CDs displayed contrary supramolecular chirality and opposite CPL in two different bi-solvent systems, which are due to the formation of self-assembled helical nanostructures with two diverse assembly modes (P and M) in aggregate state via intermolecular π-π interactions and differential hydrogen bonding (H-bonding) without the need of any additional element of chirality.

Carbon dots enhance extracellular matrix secretion for dentin-pulp complex regeneration through PI3K/Akt/mTOR pathway-mediated activation of autophagy

Pulp injury is one of the most common clinical diseases, and severe cases are usually associated with the functional loss of the tooth, while the current clinical treatment modality is only a cavity filling procedure without the regeneration of the dentin-pulp complex, thus leading to a devitalized and brittle tooth. In this study, carbon dots (CDots) with excellent biocompatibility are prepared from ascorbic acid and polyethyleneimine via a hydrothermal method. The as-prepared CDots can enhance extracellular matrix (ECM) secretion of human dental pulp stem cells (DPSCs), giving rise to increased cell adhesion on ECM and a stronger osteogenic/odontogenic differentiation capacity of DPSCs. Further, the mechanism underlying CDots-enhanced ECM secretion is revealed by the transcriptome analysis, Western blot assay and molecular dynamics simulation, identifying that the pharmacological activities of CDots are originated from a reasonable activation of the autophagy, which is mediated by regulating phosphoinositide 3-kinase/protein kinase B/mammalian target of rapamycin signaling pathway. Based on the abundant CDots-induced ECM and thereby the reinforcement of the cell-ECM adhesion, an intact dental pulp stem cell sheet can be achieved, which in return promote in vivo the efficient regeneration of dentin-pulp complex as well as blood vessels.

Highly efficient red-emitting carbon dots as a "turn-on" temperature probe in living cells

Nanothermometers, which can precisely detect the intracellular temperature changes, have great potential to solve questions concerning the cellular processes. Thus, the temperature sensors that provide fluorescent "turn-on" signals in the biological transparency window are of highly desirable. To meet these criteria, this work reported a new "turn-on" carbon dot (CD)-based fluorescent nanothermometry device for sensing temperature in living cells. The CDs that emit bright red fluorescence (R-CDs; λ_max = 610 nm in water) were synthesized with o-phenylenediamine as carbon precursor via a facile solvothermal method. The R-CDs in water were almost nonfluorescent at 15 °C. As the temperature increased, the fluorescence intensity of R-CDs exhibited a gradual increase and the final enhancement factor was greater than 21-fold. The fluorescence intensity exhibited a linear response to temperature and a high-sensitive variation of ≈13.3 % °C^-1 was detected within a broad temperature range of 28-60 °C. Moreover, the R-CD thermal sensors also exhibited high storage stability, excellent response reversibility and superior photo- and thermo-stability. Due to its good biocompatibility and "intelligent" response to external temperature, the nanothermometer could be applied for sensing temperature changes in biological media.

The role of molecular fluorophores in the photoluminescence of carbon dots derived from citric acid: current state-of-the-art and future perspectives

Carbon dots (CDs), an emerging class of nanomaterials, have attracted considerable attention due to their intriguing photophysical properties. Despite their indisputable potential of utilization in many fascinating areas of research and life, some fundamental aspects concerning their structure and the origin of their photoluminescence (PL) properties still await clarification. The mechanism of PL emission of CDs is associated with their structure, which is dependent on the carbonization process. At the initial stages of CD synthesis via a bottom-up approach, molecular fluorophores are considered to dominate the optical characteristics of the resulting nanomaterials. In this review, the recent progress in the use of molecular state theory for explanation of the structure-property relationship in CDs is summarized. This review focuses exclusively on the molecular fluorophores existing in nanomaterials prepared from citric acid (CA) as one of the most frequent carbon sources reported for the bottom-up synthesis of CDs. Consequently, the most relevant transformations of CA and the history of molecular fluorophores derived from it are described, followed by an in-depth discussion on their relevance in understanding the specific photophysical properties of blue-, green-, and red-emitting CDs. Finally, the challenging issues and future perspectives of molecular state PL mechanism exploration in CDs are highlighted.

PDA-PEI-Copolymerized Nanodots with Tailorable Fluorescence Emission and Quenching Properties for the Sensitive Ratiometric Fluorescence Sensing of miRNA in Serum

Dopamine and polyethyleneimine (PEI) copolymerized nanodots (PDA-PEI nanodots) with both fluorescence emission and quenching features were synthesized by a simple one-step reaction at room temperature. By adjusting the dopamine and PEI ratio as well as the chain length of PEI, the fluorescence emission and quenching properties of PDA-PEI nanodots can be controlled well. Under optimal conditions, the nanodots showed strong green fluorescence emission with an absolute quantum yield of 1-2% and a quenching efficiency of more than 99% to several fluorophores with emission wavelengths ranging from blue to red light regions. The nanodots with a large number of functional groups also showed strong affinity to nucleic acid strands, excellent solubility in aqueous solution, long-term stability, and uniform size distribution. Integrating these attractive features with the specific enzymatic digestion reaction of the DSN enzyme, a highly sensitive ratiometric fluorescence nanoprobe for miRNA analysis was developed. Aminomethylcoumarin acetate (AMCA), which possesses the same excitation wavelength but a well-resolved blue fluorescence emission with PDA-PEI nanodots, was selected as the signal-reporting unit for capture probe labeling, while the inherent green fluorescence of PDA-PEI nanodots served as the reference. According to the ratiometric fluorescence signal, the ratiometric fluorescence nanoprobes showed high sensitivity and good accuracy for the miRNA assay. Because of the high and universal quenching efficiency, stable fluorescence emission, easily assembled interface, and uniform morphology, the nanodots may have great application prospects to serve as a universal nanoplatform for the fabrication of ratiometric fluorescence nanoprobes.

A novel ratiometric sensor prepared based aggregation-induced emission for ultrafast detection of SO2 derivatives in food samples and living cells

As one of the gaseous signaling molecules, aberrant levels of SO₂ are usually associated with many diseases. it is of great significance to develop sensitive methods for detection SO₂ on real. In this paper, a D-π-A near-infrared aggregation-induced fluorescent probe (DPA-CN) was built using diphenylamino-4-benzaldehyde and malononitrile for sensing SO₂. The DPA-CN exhibit AIE characterization that can quickly recognize SO₂ via the Michael addition mechanism. The DPA-CN displayed emission blue drift from 650 nm to 560 nm after adding SO₂, thereby realizing rapid and sensitive colorimetric detection of SO₂. The mechanism for recognition of SO₂ was verified via magnetic resonance imaging ⁽¹H NMR), electrospray ionization mass spectrometry (ESI-MS), scanning electron microscopy (SEM) and dynamic light scattering (DLS). The DPA-CN realized rapid and sensitive recognition of SO₂ with high specificity in 10 s within the concentration range of 0-100 μM. The limit of detection (LOD) is as low as 0.31 μM. Owing to its high sensitivity and low toxicity, the DPA-CN can be applied in monitoring of SO₂ in living cells and food analysis. Furthermore, the DPA-CN was used to prepare a visible and ultrafast semiquantitative paper-based SO₂ sensor with low cost and easy operation.

Response surface methodology optimization for the synthesis of N, S-codoped carbon dots and its application for tetracyclines detection

In this study, using a convenient one-pot microwave-assisted method, we rapidly fabricated a N, S-codoped fluorescent carbon dots (NSCDs) through using citric acid (CA) and _d-penicillamine (DPA) for the detection of tetracyclines (TC). To rapidly and efficiently optimize the various synthesis parameters and significantly decrease the number of experimental runs, the effect of the synthesis factors on quantum yield (QY) by NSCDs was implemented through means of response surface methodology (RSM). The as-synthesized NSCDs presented superior photoluminescence stability with a strong quantum yield (QY) of 91.55% under optimal conditions, which was consistent with the predicted value using RSM. The fluorescence intensity of the NSCDs could be quenched effectively after adding TC by the inner filter effect (IEE) and photoinduced electron transfer (PET). Thus, the determination of TC by using NSCDs as a facile fluorescent probe was constructed in the range of 0.2-70 μM with a limit detection of 0.072 μM. Moreover, this detection approach has been utilized to detect TC in actual samples with satisfactory results.

A light-controlled DNA nanothermometer for temperature sensing in the cellular membrane microenvironment

Precise sensing of cellular temperature is one significant yet challenge task for studying miscellaneous biological processes. Herein, we report a light-controlled DNA nanothermometer that allow for real-time thermal sensing in extracellular microscope with high spatiotemporal resolution. The light-controlled DNA nanothermometer three key elements: a thermal-sensitive molecular beacon (MB) labelled with fluorophore Cy5 and Cy3 at its 5' and 3' termini, an inhibitor strand containing two photocleavable linkers (pc-linker), and a biotin modified strand, which could modify this three-strand hybridization complex onto the cell surface. Upon exposing to UV light irradiation, the light-controlled DNA nanothermometer could be remotely activated and enable to perform highly sensitive and practical ratiometric temperature sensing. Meanwhile, the light-controlled DNA nanothermometer could conduct temperature sensing in the extracellular microscope and demonstrates desirable sensitivity, excellent reversibility, and quantitative ability for extracellular temperature measurement. Therefore, this light-controlled DNA can serve as a promising tool for elucidating thermal-related cell physiological and pathological processes.

RGB-multicolor fluorescent carbon dots by changing the reaction solvent type for white light-emitting diodes

RGB-multicolor fluorescent carbon dots from o-phenylenediamine and phenylalanine by changing the solvent type and for white light-emitting diodes.

Synthesis of carbon dots with strong luminescence in both dispersed and aggregated states by tailoring sulfur doping

Carbon dots (CDots), a class of environmentally friendly carbon-based luminescent nanomaterial, have been applied in a wide variety of fields, including bioimaging and light-emitting diodes (LEDs). Prior to these applications, however, CDots usually require modifications because some of its limitations (e.g., the aggregation-induced luminescence quenching) make it difficult to apply in solid state. In order to realize CDots-based multiple applications simultaneously, this paper examines how CDots with a strong greenish-yellow fluorescence in both dispersed and aggregated states are prepared by microwave-assisted heating salicylic acid and thiourea. Based on control testing and the analysis of density functional theory calculations, S element from thiourea is doped into CDots and proves to be critical in governing the photoluminescence (PL) emission color. Featured with excellent biocompatibility and photostability, the dispersed CDots with photoluminescence quantum yields (32%) are able to function as a biological imaging reagent in vitro and in vivo without any side effect. Furthermore, the aggregated CDots also exhibit high photoluminescence quantum yields (26%) and remarkable resistance to organic solvent. These advantages will ensure that S-doped CDots can be applied as a color conversion layer so that white LEDs with different Commission International de L'Eclariage coordinates and tunable color temperature can be fabricated.

Stimulus-responsive nanomaterials under physical regulation for biomedical applications

Cancer is a growing threat to human beings. Traditional treatments for malignant tumors usually involve invasive means to healthy human tissues, such as surgical treatment and chemotherapy. In recent years the use of specific stimulus-responsive materials in combination with some non-contact, non-invasive stimuli can lead to better efficacy and has become an important area of research. It promises to develop personalized treatment systems for four types of physical stimuli: light, ultrasound, magnetic field, and temperature. Nanomaterials that are responsive to these stimuli can be used to enhance drug delivery, cancer treatment, and tissue engineering. This paper reviews the principles of the stimuli mentioned above, their effects on materials, and how they work with nanomaterials. For this aim, we focus on specific applications in controlled drug release, cancer therapy, tissue engineering, and virus detection, with particular reference to recent photothermal, photodynamic, sonodynamic, magnetothermal, radiation, and other types of therapies. It is instructive for the future development of stimulus-responsive nanomaterials for these aspects.

Green-emissive water-dispersible silicon quantum dots for the fluorescent and colorimetric dual mode sensing of curcumin

Curcumin, an active ingredient in Curcuma longa, which possesses good biological and pharmacological activities, is effective in treating many diseases. Developing simple and sensitive methods for the detection of curcumin is of great significance. In this study, novel water-dispersible silicon quantum dots (SiQDs), which can sensitively respond to curcumin through fluorescent and colorimetric dual modes were synthesized via a one-step hydrothermal treatment of N-[3-(trimethoxysilyl) propyl]-ethylenediamine (DAMO) and p-phenylenediamine. The fluorescence of SiQDs could be remarkably quenched by curcumin via the inner filter effect (IFE) and static quenching effect (SQE). A good linear relationship was obtained in the range of 0.25-75 μM with a detection limit of 91 nM. More interestingly, curcumin could also be visually detected using SiQDs via an obvious color change of the solution from pale yellow to orange-red, which allows the establishment of a sensitive colorimetric method for curcumin detection in the linear range of 0.05-57.5 μM with a detection limit of 32 nM. The proposed method was successfully applied to detect curcumin in health care products and spices. Notably, to realize rapid and convenient visual detection of curcumin, a paper sensor was also fabricated.

Optical Properties of Carbon Dots in the Deep-Red to Near-Infrared Region Are Attractive for Biomedical Applications

Carbon dots (CDs) represent a recently emerged class of luminescent materials with a great potential for biomedical theranostics, and there are a lot of efforts to shift their absorption and emission toward deep-red (DR) to near-infrared (NIR) region falling in the biological transparency window. This review offers comprehensive insights into the synthesis strategies aimed to achieve this goal, and the current approaches of modulating the optical properties of CDs over the DR to NIR region. The underlying mechanisms of their absorption, photoluminescence, and chemiluminescence, as well as the related photophysical processes of photothermal conversion and formation of reactive oxygen species are considered. The already available biomedical applications of CDs, such as in the photoacoustic imaging and photothermal therapy, photodynamic therapy, and their use as bioimaging agents and drug carriers are then shortly summarized.

Novel water-dispersible silicon nanoparticles as a fluorescent and colorimetric dual-mode probe for emodin detection

A novel fluorescent and colorimetric dual-mode sensing method based on water-dispersible SiNPs was constructed for the sensitive detection of emodin.