Group-Targeting SERS Screening of Total Benzodiazepines Based on Large-Size (111) Faceted Silver Nanosheets Decorated with Zinc Oxide Nanoparticles

TiO2 nanorod arrays@PDA/Ag with biomimetic polydopamine as binary mediators for duplex SERS detection of illegal food dyes

Based on TiO2 nanorod arrays@PDA/Ag (TNRs@PDA/Ag), a better surface-enhanced Raman scattering (SERS) sensor with effective enrichment and enhancement was investigated for duplex SERS detection of illicit food dyes. Biomimetic PDA functions as binary mediators by utilizing the structural characteristics of polydopamine (PDA), which include the conjugated structure and abundant hydrophilic groups. One PDA functioned as an electron transfer mediator to enhance the efficiency of electron transfer, and the other as an enrichment mediator to effectively enrich rhodamine B (RhB) and crystal violet (CV) through hydrogen bonding, π-π stacking, and electrostatic interactions. Individual and duplex detection of illicit food dyes (RhB and CV) was performed using TNRs@PDA/Ag to estimate SERS applications. Their linear equations and limits of detection of 1 nM for RhB and 5 nM for CV were derived. Individual and duplex food colour detection was successfully accomplished even in genuine chili meal with good results. The bifunctional TNRs@PDA/Ag-based highly sensitive and duplex SERS dye detection will have enormous potential for food safety monitoring.

4-ATP-modified CNTs@NiO-Fe2O3-Ag SERS filter membrane for rapid in-situ detection of furfural in mineral oil

Evaluating the transformer aging state and detecting multi-aging characteristics in transformer oil with high sensitivity and fast speed has become a key challenge. This study introduces a P-N heterojunction (CNTs@NiO-α-Fe2O3) fabricated through electroless nickel plating and a one-step hydrothermal method. Additionally, silver nanoparticles (AgNPs) with adjustable particle sizes are grown on the surface using a chemical reduction method. To obtain high sensitivity and rapid SERS signal, CNTs@NiO-α-Fe2O3-Ag gel is adsorbed on a disposable needle filter (220 nm) surface, and 4-aminothiophene (4-ATP) is grafted onto the surface of SERS substrate. The minimum detection limit was 0.025 mg/L (EF = 5.22 × 104), and the response time of SERS best signal could be shortened to 3 min. Density functional theory (DFT) calculations reveal that by constructing a P-N heterostructure of NiO-Fe2O3 and assessing the adsorption energies of furfural, acetone, and methanol on the surface of the P-N heterojunction. This SERS strategy has a huge application prospect in the aging diagnosis of oil-paper insulation systems in a transformer.

Superhydrophobic Surface Modification of Polymer Microneedles Enables Fabrication of Multimodal Surface-Enhanced Raman Spectroscopy and Mass Spectrometry Substrates for Synthetic Drug Detection in Blood Plasma

Microneedles are widely used substrates for various chemical and biological sensing applications utilizing surface-enhanced Raman spectroscopy (SERS), which is indeed a highly sensitive and specific analytical approach. This article reports the fabrication of a nanoparticle (NP)-decorated microneedle substrate that is both a SERS substrate and a substrate-supported electrospray ionization (ssESI) mass spectrometry (MS) sample ionization platform. Polymeric ligand-functionalized gold nanorods (Au NRs) are adsorbed onto superhydrophobic surface-modified polydimethylsiloxane (PDMS) microneedles through the control of various interfacial interactions. We show that the chain length of the polymer ligands dictates the NR adsorption process. Importantly, assembling Au NRs onto the micrometer-diameter needle tips allows the formation of highly concentrated electromagnetic hot spots, which provide the SERS enhancement factor as high as 1.0 × 106. The micrometer-sized area of the microneedle top and high electromagnetic field enhancement of our system can be loosely compared with tip-enhanced Raman spectroscopy, where the apex of a plasmonic NP-functionalized sharp probe produces high-intensity plasmonic hot spots. Utilizing our NR-decorated microneedle substrates, the synthetic drugs fentanyl and alprazolam are analyzed with a subpicomolar limit of detection. Further analysis of drug-molecule interactions on the NR surface utilizing the Langmuir adsorption model suggests that the higher polarizability of fentanyl allows for a stronger interaction with hydrophilic polymer layers on the NR surface. We further demonstrate the translational aspect of the microneedle substrate for both SERS- and ssESI-MS-based detection of these two potent drugs in 10 drug-of-abuse (DOA) patient plasma samples with minimal preanalysis sample preparation steps. Chemometric analysis for the SERS-based detection shows a very good classification between fentanyl, alprazolam, or a mixture thereof in our selected 10 samples. Most importantly, ssESI-MS analysis also successfully identifies fentanyl or alprazolam in these same 10 DOA plasma samples. We believe that our multimodal detection approach presented herein is a highly versatile detection technology that can be applicable to the detection of any analyte type without performing any complicated sample preparation.

In situ construction of Fe3O4@PDA@Au multi hotspot SERS probe for trace detection of benzodiazepines in serum

The abuse of benzodiazepines is a serious health hazard that can cause damage to the central nervous system.Trace monitoring of benzodiazepines in serum can effectively prevent the damage caused by these drugs. Therefore, in this study, a Fe₃O₄@PDA@Au core-shell satellite nanomaterial SERS(Surface-Enhanced Raman Scattering) probe that integrates magnetic separation techniques and a multi-hotspot structure was synthetized by in situ growth of gold nanoparticles on the surface of PDA(Polymerized dopamine)-coated Fe₃O₄. The size and gap of Au nanoparticles on the surface of the SERS probe can be modulated by regulating the amount of HAuCl₄ to create 3D multi-hotspot structures. The good dispersion and superparamagnetic properties of this SERS probe enable it to fully contact and load the target molecules in the serum, and the applied magnetic field facilitates separation and enrichment.This process increases the molecular density and number of SERS hotspots, thereby enhancing detection sensitivity. Based on the above considerations, this SERS probe can detect traces of eszopiclone and diazepam in serum at concentrations as low as 1 μg/ml with good linearity, offering promising applications in clinical monitoring of drug concentrations in blood.

A Review on Integrated ZnO-Based SERS Biosensors and Their Potential in Detecting Biomarkers of Neurodegenerative Diseases

Surface-enhanced Raman spectroscopy (SERS) applications in clinical diagnosis and spectral pathology are increasing due to the potential of the technique to bio-barcode incipient and differential diseases via real-time monitoring of biomarkers in fluids and in real-time via biomolecular fingerprinting. Additionally, the rapid advancements in micro/nanotechnology have a visible influence in all aspects of science and life. The miniaturization and enhanced properties of materials at the micro/nanoscale transcended the confines of the laboratory and are revolutionizing domains such as electronics, optics, medicine, and environmental science. The societal and technological impact of SERS biosensing by using semiconductor-based nanostructured smart substrates will be huge once minor technical pitfalls are solved. Herein, challenges in clinical routine testing are addressed in order to understand the context of how SERS can perform in real, in vivo sampling and bioassays for early neurodegenerative disease (ND) diagnosis. The main interest in translating SERS into clinical practice is reinforced by the practical advantages: portability of the designed setups, versatility in using nanomaterials of various matter and costs, readiness, and reliability. As we will present in this review, in the frame of technology readiness levels (TRL), the current maturity reached by semiconductor-based SERS biosensors, in particular that of zinc oxide (ZnO)-based hybrid SERS substrates, is situated at the development level TRL 6 (out of 9 levels). Three-dimensional, multilayered SERS substrates that provide additional plasmonic hot spots in the z-axis are of key importance in designing highly performant SERS biosensors for the detection of ND biomarkers.

Quantitative Analysis of Acetone in Transformer Oil Based on ZnO NPs@Ag NWs SERS Substrates Combined with a Stoichiometric Model

Acetone is an essential indicator for determining the aging of transformer insulation. Rapid, sensitive, and accurate quantification of acetone in transformer oil is highly significant in assessing the aging of oil-paper insulation systems. In this study, silver nanowires modified with small zinc oxide nanoparticles (ZnO NPs@Ag NWs) were excellent surface-enhanced Raman scattering (SERS) substrates and efficiently and sensitively detected acetone in transformer oil. Stoichiometric models such as multiple linear regression (MLR) models and partial least square regressions (PLS) were investigated to quantify acetone in transformer oil and compared with commonly used univariate linear regressions (ULR). PLS combined with a preprocessing algorithm provided the best prediction model, with a correlation coefficient of 0.998251 for the calibration set, 0.997678 for the predictive set, a root mean square error in the calibration set (RMSECV = 0.12596 mg/g), and a prediction set (RMSEP = 0.11408 mg/g). For an acetone solution of 0.003 mg/g, the mean absolute percentage error (MAPE) was the lowest among the three quantitative models. For a concentration of 7.29 mg/g, the MAPE was 1.60%. This method achieved limits of quantification and detections of 0.003 mg/g and 1 μg/g, respectively. In general, these results suggested that ZnO NPs@Ag NWs as SERS substrates coupled with PLS simply and accurately quantified trace acetone concentrations in transformer oil.

Detection of 3,4-Methylene Dioxy Amphetamine in Urine by Magnetically Improved Surface-Enhanced Raman Scattering Sensing Strategy

Abuse of illicit drugs has become a major issue of global concern. As a synthetic amphetamine analog, 3,4-Methylene Dioxy Amphetamine (MDA) causes serotonergic neurotoxicity, posing a serious risk to human health. In this work, a two-dimensional substrate of ITO/Au is fabricated by transferring Au nanoparticle film onto indium–tin oxide glass (ITO). By magnetic inducing assembly of Fe₃O₄@Au onto ITO/Au, a sandwich-based, surface-enhanced Raman scattering (SERS) detection strategy is designed. Through the use of an external magnet, the MDA is retained in the region of hot spots formed between Fe₃O₄@Au and ITO/Au; as a result, the SERS sensitivity for MDA is superior compared to other methods, lowering the limit of detection (LOD) to 0.0685 ng/mL and attaining a corresponding linear dynamic detection range of 5–10⁵ ng/mL. As an actual application, this magnetically improved SERS sensing strategy is successfully applied to distinguish MDA in urine at trace level, which is beneficial to clinical and forensic monitors.

Ag Nanoparticles Decorated ZnO Nanorods as Multifunctional SERS Substrates for Ultrasensitive Detection and Catalytic Degradation of Rhodamine B

Industrial wastewater containing large amounts of organic pollutants is a severe threat to the environment and human health. Thus, the rapid detection and removal of these pollutants from wastewater are essential to protect public health and the ecological environment. In this study, a multifunctional and reusable surface-enhanced Raman scattering (SERS) substrate by growing Ag nanoparticles (NPs) on ZnO nanorods (NRs) was produced for detecting and degrading Rhodamine B (RhB) dye. The ZnO/Ag substrate exhibited excellent sensitivity, and the limit of detection (LOD) for RhB was as low as 10⁻¹¹ M. Furthermore, the SERS substrate could efficiently degrade RhB, with a degradation efficiency of nearly 100% within 150 min. Moreover, it retained good SERS activity after multiple repeated uses. The interaction between Ag NPs, ZnO, and RhB was further investigated, and the mechanism of SERS and photocatalysis was proposed. The as-prepared ZnO/Ag composite structure could be highly applicable as a multifunctional SERS substrate for the rapid detection and photocatalytic degradation of trace amounts of organic pollutants in water.

Facile Synthesis of Porous Ag Crystals as SERS Sensor for Detection of Five Methamphetamine Analogs

Porous noble metal nanomaterials have attracted extensive attention due to their high specific surface area and surface plasmon resonance effect. However, it is difficult to form porous structures due to the high mobility and low reduction potential of noble metal precursors. In this article, we developed a facile method for preparing porous Ag with a controllable structure at room temperature. Two kinds of Ag crystals with different porous structures were successfully prepared by using AgCl cubes as sacrificial templates. Through the galvanic replacement reaction of Zn and AgCl, Ag crystals with a sponge-like porous structure were successfully prepared. Additionally, using NaBH₄ as the reducing agent, we prepared granular porous Ag cubes by optimizing the amount of reducing agent. Both the sponge-like and granular porous Ag cubes have clean and accessible surfaces. In addition, we used the prepared two porous Ag cubes as substrate materials for SERS detection of five kinds of methamphetamine analogs. The experimental results show that the enhancement effect of granular porous Ag is better than that of sponge-like porous Ag. Furthermore, we probed the hot spot distribution of granular porous Ag by Raman mapping. By using granular porous Ag as the substrate material, we have achieved trace detection of 5 kinds of methamphetamine analogs including Ephedrine, Amphetamine, N-Methyl-1-(benzofuran-5-yl)propan-2-amine (5-MAPB), N-Methyl-1-(4-methoxyphenyl)propan-2-amine (PMMA) and N-Methyl-1-(4-fluorophenyl)propan-2-amine (4-FMA). Furthermore, to achieve qualitative differentiation of analogs with similar structures we performed density functional theoretical (DFT) calculations on the Raman spectra of the above analogs. The DFT calculations provided the vibrational frequencies, Raman activities, and normal mode assignment for each analog, enabling the qualitative differentiation of the above analogs.

Highly sensitive and reproducible CNTs@Ag modified Flower-Like silver nanoparticles for SERS situ detection of transformer Oil-dissolved furfural

Accurately evaluating the aging state of oil paper insulation in electrical equipment is a key to ensure the safe operation of the power transformer. For achieving highly sensitive in-situ detection of dissolved furfural in transformer oil with good reproducibility, flower-like silver nanoparticles modified with carbon nanotubes (CNTs@Ag-F-AgNPs) was synthesized by a combination of electroless silver plating and redox method. The large specific surface area and strong adsorption capacity of CNTs@Ag promoted the formation of more "hot spots". CNTs@Ag-F-AgNPs were adsorbed on Si-Au substrate via mercapto groups on the coupling agent 1'4 phenyldimercaptan molecule (BDT). Using rhodamine 6G (R6G) as probe molecule, the enhanced factor reached 6.96 × 10⁹. Then, the substrate was used for in-situ SERS detection of transformer oil-dissolved furfural at different concentrations and the detection limit was 2.25 mg/L at 1703 cm^-1 (Stretching vibration of C = O in furfural molecule), fulfilling requirements of furfural content detection after severe aging of transformer (4 mg/L). Besides, the relative standard deviation (RSD) of characteristic peak intensity at ten different positions was only 1.74%. These results exhibite that three-dimensional nanostructure with high sensitivity and good reproducibility exhibited a wide application range for in situ detection of dissolved trace furfural in transformer oil.

Hydrophobic Wafer-Scale High-Reproducibility SERS Sensor Based on Silicon Nanorods Arrays Decorated with Au Nanoparticles for Pesticide Residue Detection

High sensitivity and reproducibility are highly desirable to a SERS sensor in diverse detection applications. Moreover, it is a great challenge to determine how to promote the target molecules to be more concentrated on the hotspots of the SERS substrate by engineering a surface with switching interfacial wettability. Along these lines, wafer-scale uniformly hydrophobic silicon nanorods arrays (SiNRs) decorated with Au nanoparticles were designed as the SERS substrate. Typically, the SERS substrate was fabricated by enforcing the polystyrene (PS) sphere self-assembly, as well as the plasma etching and the magnetron sputtering techniques. Consequently, the SERS substrate was treated by soaking within a n-dodecyl mercaptan (NDM) solution at different times in order to obtain adjustable wettabilities. By leveraging the electromagnetic enhancement resulted from the Au nanostructures and enrichment effect induced by the hydrophobicity, the SERS substrate is endowed with efficient SERS capabilities. During the detection of malachite green (MG), an ultralow relative standard deviation (RSD) 4.04-6.14% is achieved and the characteristic signal of 1172 cm^-1 can be detected as low as 1 ng/mL. The proposed SiNRs' structure presents outstanding SERS activity with sensitivity and reproducibility rendering thus an ideal candidate for potential application in analytical detection fields.

Si/TiO2/Ag Multistorey Structures with Interfacial Charge Transfer for a Recyclable Surface-Enhanced Raman Scattering Substrate

In this work, highly ordered TiO₂/Ag bilayer structures on p-type silicon (Si) wafers are prepared by photolithography and electrochemical self-assembly methods. The interfacial charge transfer (CT) of this Si/TiO₂/Ag multistorey structure with a specially aligned work function is studied. This is important to deduce the interfacial electron migration behavior of SERS. The three-dimensional finite-difference time-domain (3D FDTD) simulation is used to explore the combined CT-EM enhancement mechanism. The result shows that the electron movement under the CT mechanism can induce the resonance effect of free electrons to further improve EM performance. In addition, the effect of agglomerated Ag nanoparticle size distribution on the SERS property and the self-cleaning property of Si/TiO₂/Ag multistorey structures is investigated. Finally, this unique structure of highly ordered Si/TiO₂/Ag SERS substrate shows superior sensitivity, reproducibility, and stability. Rhodamine 6G (R6G) with trace concentrations as low as 10^-15 M can be detected, and the EF is estimated to be about 8.9 × 10¹³. The relative standard deviation (RSD) at 1511 cm^-1 is about 4.7%. These results are very promising for the practical application of the SERS technique in the rapid trace determination in many fields.

Noble metal modified ReS2 nanocavity for surface-enhanced Raman spectroscopy (SERS) analysis

The rhenium disulphide (ReS₂) nanocavity-based surface enhanced Raman scattering (SERS) substrates ware fabricated on the gold-modified silicon pyramid (PSi) by thermal evaporation technology and hydrothermal method. In this work, the ReS₂ nanocavity was firstly combined with metal nanostructures in order to improve the SERS properties of ReS₂ materials, and the SERS response of the composite structure exhibits excellent performance in sensitivity, uniformity and repeatability. Numerical simulation reveals the synergistic effect of the ReS₂ nanocavity and the plasmon resonance generated by the metal nanostructures. And the charge transfer between the metal, ReS₂ and the analytes was also verified and plays an non-ignorable role. Besides, the plasmon-driven reaction for p-nitrothiophenol (PNTP) to p,p'-dimercaptobenzene (DMAB) conversion was successfully in-situ monitored. Most importantly, it is found for the first time that the SERS properties of ReS₂ nanocavity-based substrates are strongly temperature dependent, and the SERS effect achieves the best performance at 45 °C. In addition, the low concentration detection of malachite green (MG) and crystal violet (CV) molecules in lake water shows its development potential in practical application.

Rapid Formation of Nanoclusters for Detection of Drugs in Urine Using Surface-Enhanced Raman Spectroscopy

We developed a method based on surface-enhanced Raman spectroscopy (SERS) and a sample pretreatment process for rapid, sensitive, reproducible, multiplexed, and low-cost detection of illegal drugs in urine. The abuse of new psychoactive substances (NPS) has become an increasingly serious problem in many countries. However, immunoassay-based screening kits for NPS are usually not available because of the lack of corresponding antibodies. SERS has a great potential for rapid detection of NPS because it can simultaneously detect multiple kinds of drugs without the use of antibodies. To achieve highly sensitive SERS detection of drugs, sodium bromide was first employed to induce the rapid formation of Ag nanoclusters by aggregating silver nanoparticles (AgNPs) in the extracted sample solution. SERS measurements were performed immediately after the sample pretreatment without incubation. The three-dimensional SERS hot spots were believed to form significantly within the nanoclusters, providing strong SERS enhancement effects. The displacement of citrate molecules on the surfaces of the AgNPs by bromide ions helped increase the adsorption of drug molecules, increasing their areal density. We demonstrated the simultaneous detection of two kinds of NPS, methcathinone and 4-methylmethcathinone, in urine at a concentration as low as 0.01 ppm.