Post-Chromatographic Dicationic Ionic Liquid-Based Charge Complexation for Highly Sensitive Analysis of Anionic Compounds by Ultra-High-Performance Supercritical Fluid Chromatography Coupled with Electrospray Ionization Mass Spectrometry

Progress in the application of ionic liquids and deep eutectic solvents for the separation and quantification of per- and polyfluoroalkyl substances

Per- and polyfluoroalkyl substances (PFASs), often labeled as "forever chemicals," earned this moniker due to their widespread presence in the environment, bioaccumulative tendencies, and resistance to remediation efforts. Employed for decades in various applications, spanning from stain-resistant fabrics to grease-proof food containers and fire-fighting foams, PFASs have evolved into an anthropogenic nightmare. Their adverse impact on human health, including immune dysfunction, infertility, and a spectrum of cancers, is alarming. Conventional water treatment methods, notably in the case of short-chain congeners, struggle to effectively eliminate PFASs, underscoring the pressing need for enhanced adsorbents. In recent years, there has been a prominent surge in the exploration of innovative techniques centered around ionic liquids (ILs) and deep eutectic solvents (DESs) for the removal of PFASs from various sources, including food samples like cooking oil, as well as environmental waters. In this Review, we delve into key advancements and discoveries related to the utilization of ILs and DESs as media for the liquid-liquid extraction of PFASs, as well as their applications as sorbents on solid-state or nanoscale supports. Our exploration encompasses groundbreaking approaches, including the utilization of dicationic ILs for ultra-sensitive mass spectrometric PFAS detection, alongside the innovative application of fluorinated ILs and hydrophobic DESs, enabling highly efficient PFAS sequestration. The landscape of existing PFAS extraction methods is riddled with formidable challenges, including limited selectivity, matrix interferences, subpar extraction efficiency, exorbitant costs, laborious procedures, ecological consequences, and a lack of standardization. Given these challenges, our review unequivocally asserts the pivotal role ILs and DESs will play in shaping the next generation of PFAS remediation strategies. Rigorous characterization of water solubility, toxicity, and biodegradation, along with improved recyclability and thorough techno-economic analyses, are essential for further progress. Future focus must also extend to addressing short-chain PFASs (such as PFBS) and PFAS alternatives (including ADONA, GenX, F-53B), which often pose higher toxicity risks than the compounds they aim to replace. A forward-thinking approach will integrate cutting-edge data-driven techniques, such as machine learning, to enhance our understanding and response to PFAS-related issues. Finally, we advocate seamless integration of PFAS separation with advanced treatment, efficiently isolating and destroying these compounds for a lasting solution to contamination challenges.

A novel switchable water stationary phase for supercritical fluid chromatography

A novel pH switchable water stationary phase is presented for use in supercritical fluid chromatography (SFC). By adding NH4OH to the water coating and system hydration, changes in CO2 pressure and temperature allow a wide range of stationary phase pH conditions (∼3-9) to be achieved, which impact analyte retention properties. For example, 100 atm and 50 °C produces an acidic water stationary phase (pH near 4.0) where octanoic acid readily elutes while the base caffeine does not. Conversely, at 80 atm and 120 °C a basic water stationary phase (pH near 8.0) is obtained and the opposite occurs. Further, under constant pressure and temperature conditions, simply adding or removing NH4OH from the system is also found to readily allow switching between the basic and acidic water stationary phase modes and demonstrates control over ionizable analyte elution. For instance, hexanoic acid elution is near 40 times more delayed on a basic water stationary phase and, as such, it can be eluted at later points in time as desired by removing the NH4OH and switching to an acidic stationary phase. Experiments indicate that stationary phase pH switching occurs uniformly across the 15 m column length within about 18 s and that analyte retention times are very reproducible upon performing a switch (1.4% RSD; n = 3). Results demonstrate the selectivity factor between acidic and neutral analytes can be reversed and increased about 35 times, while in other trials resolution also similarly increased near 40-fold. By rapidly switching the stationary phase pH back and forth between acidic and basic modes, the selectivity between ionizable analytes could also be increased as desired. Various applications with the system show that it can vastly increase the separation between target analytes and matrix components as required by the dynamics of a particular separation.

Spontaneous In-Source Fragmentation Reaction Mechanism and Highly Sensitive Analysis of Dicofol by Electrospray Ionization Mass Spectrometry

Although dicofol has been widely banned all over the world as a kind of organochlorine contaminant, it still exists in the environment. This study developed a high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS/MS) detection technique for dicofol, an environmental pollutant, for the first time using in-source fragmentation. The results confirmed that m/z 251 was the only precursor ion of dicofol after in-source fragmentation, and m/z 139 and m/z 111 were reasonable product ions. The main factors triggering the in-source fragmentation were the H⁺ content and solution conductivity when dicofol entered the mass spectrometer. Density functional theory can be used to analyze and interpret the mechanism of dicofol fragmentation reaction in ESI source. Dicofol reduced the molecular energy from 8.8 ± 0.05 kcal/mol to 1.0 ± 0.05 kcal/mol, indicating that the internal energy release from high to low was the key driving force of in-source fragmentation. A method based on HPLC-MS/MS was developed to analyze dicofol residues in environmental water. The LOQ was 0.1 μg/L, which was better than the previous GC or GC-MS methods. This study not only proposed an HPLC-MS/MS analysis method for dicofol for the first time but also explained the in-source fragmentation mechanism of compounds in ESI source, which has positive significance for the study of compounds with unconventional mass spectrometry behavior in the field of organic pollutant analysis and metabonomics.

Online coupling of matrix solid-phase dispersion to direct analysis in real time mass spectrometry for high-throughput analysis of regulated chemicals in consumer products

The current work is the first study on online coupling of matrix solid-phase dispersion (MSPD) to direct analysis in real time mass spectrometry (DART-MS) bridging with solid-phase analytical derivatization (SPAD) based on a graphene oxide nanosheets (GONs)-coated cotton swab. Proof-of-concept demonstrations were explored for high-throughput analysis of a diversity of regulated chemicals in consumer products such as textiles, toys, and cosmetics. On-demand sorbent combinations were blended with samples, packed into MSPD columns, and mounted on a homemade 3D-printed rack module for automated sample feeding. To achieve good synergy between MSPD and DART-MS, a cotton swab with a conical tip deposited with GONs was attached to the bottom of the MSPD column. The swabs serve as a solid-phase microextraction probe for convenient enrichment of the eluted analytes from MSPD, thermal desorption of the enriched analytes by DART, and sensitive detection by a hybrid quadrupole-Orbitrap mass spectrometer. Furthermore, the utility of an on-swab SPAD strategy was demonstrated for the detection of formaldehyde by use of the derivatizing reagent of dansyl hydrazine, contributing to improved ionization efficiency without compromising the overall coherence of the analytical workflow. The MSPD-DART-MS methodology was systematically optimized and validated, obtaining acceptable recovery (71.7-110.3%), repeatability (11.8-19.3%), and sensitivity (limits of detection and quantitation in the ranges of 6.2-19.5 and 23.7-75.9 μg/kg) for 32 target analytes. The developed protocol streamlined sample extraction, clean-up, desorption, ionization, and detection, highlighting the appealing potential for high-throughput analysis of samples with complex matrices.

Optimization and validation of a fast supercritical fluid chromatography tandem mass spectrometry method for the quantitative determination of a large set of PFASs in food matrices and human milk

An Ultra-High Performance Supercritical Fluid Chromatography coupled with tandem Mass Spectrometry analytical method (UHPSFC-MS/MS) was developed for the determination of 34 perfluoroalkylated substances (PFASs) in food-related matrices. Two parameters (i.e. stationary phase and co-solvent) were selected and optimized using a step-by-step method, while a design of experiment (DoE) method using a central composite design (CCD) was implemented to optimize column temperature, mobile phase flow rate, co-solvent concentration and automated back pressure regulator (ABPR). The Torus 2-PIC column was selected along with ammonium acetate AcoNH₄ as additive in the co-solvent. DoE optimization of both peak width and resolution enabled validating an optimized model (desirability 0.613) and setting column temperature at 38.7 °C, AcoNH₄ concentration at 8 mM, mobile phase flow rate of 1.9 mL/min and ABPR at 1654 psi. The validated resulting method enabled reaching limits of quantification below 0.2 ng/g (w.w.) for 97 % PFASs in accordance with current EU requirements. The strategy was successfully applied to the characterization of a range (n > 30) of food-related matrices (red meat, poultry meat, eggs, fish and breast milk) collected in Algeria in 2019. PFOA and PFBA were observed as the most frequently detected PFASs, i.e. in 96.96 % and 90.9 % of the samples respectively. The highest concentrations were determined in fishery products up to 4.42 ng/g (w.w.) for PFTeDA and 0.75 ng/g (w.w.) for PFOS.

Electromembrane Extraction and Dual-Channel Nanoelectrospray Ionization Coupled with a Miniature Mass Spectrometer: Incorporation of a Dicationic Ionic Liquid-Induced Charge Inversion Strategy

Green analytical chemistry aims at developing analytical methods with minimum use and generation of hazardous substances for the protection of human health and the environment. To address this need, a green analytical protocol has been developed for the analysis of anionic compounds integrating electromembrane extraction (EME), dual-channel nanoelectrospray ionization (nanoESI), and a miniature mass spectrometer. Haloacetic acids (HAAs) have attracted considerable public concern due to their adverse effects on human health and were selected as model analytes for method development. A flat membrane EME device was developed and assembled in-house. Optimization of fundamental operational parameters was performed using single-factor test and response surface methodology. Both the EME acceptor phase and an imidazolium-based dicationic ionic liquid (DIL), 1,1-bis(3-methylimidazolium-1-yl) butylene difluoride (C₄(MIM)₂F₂), were subjected to dual-channel nanoESI and miniature mass spectrometry analysis based on a charge inversion strategy, where positively charged complexes were formed. Enhancement in signal intensity by as much as 2 magnitudes was achieved in the positive-ion mode compared to the negative-ion mode in the absence of the dicationic ion-pairing agent. The developed protocol was validated, obtaining good recoveries ranging from 82.7 to 109.9% and satisfactory sensitivity with limits of detection (LODs) and quantitation (LOQs) in the ranges of 1-5 and 2-10 μg/L, respectively. The greenness of the analytical procedure was assessed with a calculated score of 0.71, indicating a high degree of greenness. The developed method was applied to the analysis of real environmental or municipal water samples (n = 16), exhibiting appealing potential for outside-the-laboratory applications.