“Add on” Dual-Modal Optical Immunoassay by Plasmonic Metal NP-Semiconductor Composites

RuZn NPs with electroactivity and oxidase-like property for dual-mode anti-cancer drug monitoring

6-mercaptopurine (6-MP) as the effective anti-cancer drug was used for the treatment of Crohn's disease and acute lymphoblastic leukaemia, but the response to maintenance therapy was variable with individual differences. In order to control the dosage and decrease the side effects of 6-MP, a sensitive and stable assay was urgently needed for 6-MP monitoring. Herein, RuZn NPs with electrochemical oxidation property and oxidase-like activity was proposed for dual-mode 6-MP monitoring. Burr-like RuZn NPs were prepared and explored to not only exhibit an electrochemical oxidation signal at 0.78 V, but also displayed excellent oxidase-like performances. RuZn NPs were utilized for the dual-mode monitoring of 6-MP, attributing to the formation of Ru-SH covalent bonding. The colorimetric method showed good linearity from 10 μM to 5 mM with the limit of detection (LOD) of 300 nM, while the electrochemical method provided a higher sensitivity with the LOD of 37 nM in range from 100 nM to 200 μM. This work provided a new way for the fabrication of dual-functional nanotags with electroactivity and oxidase-like property, and opened a dual-mode approach for the 6-MP detection applications with complementary and satisfactory results.

A dual-mode lateral flow immunoassay by ultrahigh signal-to background ratio SERS probes for nitrofurazone metabolites ultrasensitive detection

In this work, an ultra-sensitive lateral flow immunoassay (LFIA) with SERS/colorimetric dual signal mode was constructed for the detection of nitrofurazone metabolites, an antibiotic prohibited in animal-origin foods. Au@4-MBN@AgNRs nano-sandwich structural signal tag integrates the unique advantages of high signal-to-background ratio and anti-matrix interference through geometric control of SERS tag and nanoengineering adjustment of chemical composition. Under the optimal conditions, the detection limits of nitrofurazone metabolites by SERS/colorimetric dual-mode LFIA were 20 pg/mL (colorimetric mode) and 0.08 pg/mL (SERS mode). Excitingly, the vLOD of the colorimetric signal improved by a factor of 100 compared to Au NPs-based LFIA. In this study, the proposed dual-mode LFIA was successfully applied to the on-site real-time detection of honey, milk powder, and chicken. It is anticipated that with low background interference and anti-matrix interference output signal, our proposed dual-mode strategy can pave an innovative pathway for the fabrication of a powerful biosensor.

A comprehensive review on the detection of Staphylococcus aureus enterotoxins in food samples

Staphylococcal enterotoxins (SEs), the major virulence factors of Staphylococcus aureus, cause a wide range of food poisoning and seriously threaten human health by infiltrating the food supply chain at different phases of manufacture, processes, distribution, and market. The significant prevalence of Staphylococcus aureus calls for efficient, fast, and sensitive methods for the early detection of SEs. Here, we provide a comprehensive review of the hazards of SEs in contaminated food, the characteristic and worldwide regulations of SEs, and various detection methods for SEs with extensive comparison and discussion of benefits and drawbacks, mainly including biological detection, genetic detection, and mass spectrometry detection and biosensors. We highlight the biosensors for the screening purpose of SEs, which are classified according to different recognition elements such as antibodies, aptamers, molecularly imprinted polymers, T-cell receptors, and transducers such as optical, electrochemical, and piezoelectric biosensors. We analyzed challenges of biosensors for the monitoring of SEs and conclude the trends for the development of novel biosensors should pay attention to improve samples pretreatment efficiency, employ innovative nanomaterials, and develop portable instruments. This review provides new information and insightful commentary, important to the development and innovation of further detection methods for SEs in food samples.

Plasmon enhanced luminescence of Tb/Eu co-doped film by Au NRs-PVA nanocomposite film

Plasmonic nanostructures have great potential for improving the radiation properties of emitters. Here, the plasmonic Au nanorods-PVA nanocomposite films are used to uniformly improve the photoluminescence of Tb/Eu co-doped PMMA film within the local micro-region. Under the excitation of 292 nm, the maximum enhancement factor is 37.2-fold for emission at 612 nm and 21.6-fold for emission at 545 nm. Moreover, the finite different time domain simulations are developed to further explain the experimental results. It is indicated that the modulation of luminescence can be attributed to the increase of the local density of optical states through the Purcell effect and the improvement of the energy transfer efficiency between Tb and Eu. Under the excitation of 360 nm, the maximum enhancement factor is about 71.5-fold. In this case, the Au nanorods are mainly used for modulating the emission process at 612 nm, which deduced a greater enhancement factor at 612 nm. This study provides a deep understanding of the interactions between rare earth ions co-doped materials and plasmonic nanostructures, building a bridge to fabricate a useful platform for several applications, such as thin film-based detectors and sensors.

pH-Responsive Plasmon-Enhanced Persistent Luminescent ZnGa2O4:Cr3+ Nanopomegranate for Tumor Imaging

Noble metal compositing is a promising method to enhance radiance intensity of persistent luminescent (PersL) nanoparticles (NPs) via surface plasmon resonance (SPR) for better tumor imaging, but it rarely unites with the pH-response strategy due to the challenge of realizing rigorous pH-responsive spatial distance control as a "button switch" of SPR. Here, ZnGa2O4:Cr3+ (ZGC) NPs as "pomegranate seeds" are cladded with sodium alginate to form nanoclusters (ZGC-SA), subsequently coated with carboxyl-rich polymers to acquire "pomegranate rind" (ZSPB) and finally decorated with 10 nm gold NPs (AuNPs) on the surface to obtain nanopomegranate structure (ZSPB@AuNPs). Though without deliberate distance control, there are plenty of "seeds" inside ZSPB@AuNPs fortunately at appropriate positions, which could be plasmon-enhanced by AuNPs. Furthermore, triggered by carboxyl protonation in subacid tumor, ZSPB@AuNPs aggregate and subsequently facilitate such plasmon enhancement effect, resulting in 4.4-fold PersL promotion at pH 5.5 (tumor microenvironment, TME) over pH 7.4 and in a maximum "tumor to normal tissue ratio" of PersL imaging signals of 125.9. Under surgical navigation of ZSPB@AuNPs, intramuscular tumors of mice could be resected without residue signals left. This nanopomegranate achieves TME pH-responsive plasmon-enhanced PersL for the first time and broadens the way for designing plasmon-enhanced PersL nanosystems.

Gold Nanobipyramid Hotspot Aggregation-Induced Surface-Enhanced Raman Scattering for the Ultrasensitive Detection of miRNA

Herein, a surface-enhanced Raman scattering (SERS) biosensor was constructed by gold nanobipyramid (Au NBP) hotspot aggregation-induced SERS (HAI-SERS) for the ultrasensitive detection of microRNA-221 (miRNA-221). Impressively, compared with single Au NBP, the multiple Au NBPs assembled by tetrahedral DNA nanostructures (TDNs) could increase hotspot aggregation to significantly enhance the SERS signal of Raman molecule methylene blue (MB). Meanwhile, in the aid of Exo-III assisted target cycle amplification and TDNs-induced catalytic hairpin assembly (CHA) amplification, the biosensor could achieve the sensitive detection of miRNA-221 with a linear range of 1 fM-10 nM, and the limit of detection (LOD) was 0.59 fM, which could be used for practical application in MHCC-97L and MCF-7 cell lysates. This work provided a method for hotspot aggregation to enhance SERS for the detection of biomarkers and disease diagnosis.

SERS-active plasmonic metal NP-CsPbX3 films for multiple veterinary drug residues detection

Sensitive and multiple veterinary drug residues detection is of important for food safety. Herein, uniform plasmonic Au nanobipyramids@Ag nanorods (Au NBP@Ag NR)-CsPbX₃ films with strong surface-enhanced Raman scattering (SERS) activity were constructed. The effects of different CsPbX₃ (X = Cl, Br, I, or mixed halogens) quantum dots (QDs) on the SERS performances of plasmonic metal NP films were investigated. CsPbI₃ QDs with large dielectric constant could be served as the dielectric media to retard the attenuation of electromagnetic evanescent wave, inducing strong electromagnetic strength for SERS enhancement. Plasmon-induced metal-to-perovskite interfacial charge transfer transition also contributed to SERS enhancement. SERS-active plasmonic Au NBP@Ag NR-CsPbI₃ films had excellent sensitivity and high reproducibility for quantitative, accurate and multiple detection of chloramphenicol, diazepam and malachite green in food matrix. This work deepened the understanding of the SERS enhancement mechanisms of plasmonic metal NP-perovskite hybrid heterostructures, showing potential prospects in food safety monitoring.

A micro-carbon nanotube transistor for ultra-sensitive, label-free, and rapid detection of Staphylococcal enterotoxin C in food

Staphylococcal enterotoxin C (SEC) is an enterotoxin produced by Staphylococcus aureus, which can cause intestinal diseases. Therefore, it is of great significance to develop a sensitive detection method for SEC to ensure food safety and prevent foodborne diseases in humans. A field-effect transistor (FET) based on high-purity carbon nanotubes (CNTs) was used as a transducer, and a nucleic acid aptamer with high affinity was used for recognition to capture the target. The results indicated that the biosensor achieved an ultra-low theoretical detection limit of 1.25 fg/mL in PBS, and its good specificity was verified by detecting target analogs. Three typical food homogenates were used as the solution to be measured to verify that the biosensor had a swift response time (within 5 min after sample addition). An additional study with a more significant basa fish sample response also showed excellent sensitivity (theoretical detection limit of 8.15 fg/mL) and a stable detection ratio. In summary, this CNT-FET biosensor enabled the label-free, ultra-sensitive, and fast detection of SEC in complex samples. The FET biosensors could be further used as a universal biosensor platform for the ultrasensitive detection of multiple biological toxic pollutants, thus considerably stopping the spread of harmful substances.

Single-Probe-Based Colorimetric and Photothermal Dual-Mode Identification of Multiple Bacteria

Effective identification of multiple pathogenic bacteria in unknown samples is important for disease prevention and control but remains a challenge yet. A single-mode array-based sensing approach is simple and sensitive, but it usually relies on the use of multiple cross-reactive receptors to construct sensor arrays, which is cumbersome and insufficiently accurate. Here, we developed a sensor array with colorimetric and photothermal dual mode of differentiating multiple pathogenic bacteria. The sensor array was based on boronic acid-functionalized Au-Fe₃O₄ nanoparticles (BA-GMNPs), which not only possess localized surface plasmon resonance properties, showing a burgundy color similar to that of AuNPs, but also exhibit mild superparamagnetism, allowing for the differentiation of bacteria before and after binding to the nanoparticles. Immobilization of BA-GMNPs on the bacterial cell surface by covalent bonding would diminish NaCl-induced assembly of BA-GMNPs. Different BA-GMNPs@bacterial complexes differed in their ability to resist assembly and produced different colorimetric and photothermal response signals. A unique molecular fingerprint of each bacterium was obtained by linear discriminant analysis of the response patterns, demonstrating an effective differentiation among the six species studied. Compared with single-mode sensing arrays based on multiple receptors, this method only requires the preparation of a single nanomaterial, which produces two signal outputs for the identification of multiple bacteria with better differentiation. It can distinguish not only multiple pathogenic bacteria but also Gram-negative and Gram-positive bacteria, and, more importantly, it can perform preliminary discrimination of unknown samples.

Tunable Preparation of SERS-Active Au-Ag Janus@Au NPs for Label-Free Staphylococcal Enterotoxin C Detection

Trace staphylococcal enterotoxin C (SEC) in food poses a serious risk to human health, and it is vital to develop a sensitive and accurate approach for SEC monitoring. Herein, a surface-enhanced Raman scattering (SERS) aptasensor was developed for the quantitative detection of SEC. SERS-active gold-silver Janus@gold nanoparticles (Au-Ag Janus@Au NPs) were prepared and showed tunable solid and hollow nanostructures by simply controlling the pH values of the reaction system. Solid Au-Ag Janus@Au NPs exhibited intrinsic and enhanced SERS activity due to the intense plasmonic coupling effect between Au dots and Au-Ag Janus NPs, which was 2.27-fold and 17.46-fold higher than that of Au-Ag Janus NPs and hollow Au-Ag Janus@Au NPs, respectively. The attachment of multiple Au dots also protected Ag islands from oxidization, which increased the stability of Au-Ag Janus@Au NPs. Solid Au-Ag Janus@Au NPs served as a label-free, strong, and stable SERS detection probe and achieved sensitive and reliable detection of SEC. The limit of detection was as low as 0.55 pg/mL. This study will expand the application prospects of label-free SERS detection probes in complex systems for food safety monitoring.

A simple and efficient strategy for trace detection of ferroptosis-related miRNAs based on novel hydrophobic paper-based plasmonic substrate and "inverse molecular sentinel (iMS)" nanoprobes

Monitoring ferroptosis-related miRNAs is crucial for the treatment and prognosis of patients with intracerebral hemorrhage. In this work, a novel hydrophobic paper (h-paper)-based plasmonic substrate was produced by dropping DS Au nanorods with a narrow range of sizes and morphologies onto h-paper. Raman reporter molecules were adsorbed to the array surface, and surface-enhanced Raman scattering spectra at randomly selected points reveal uniform and significant SERS enhancement. Hairpin DNAs labelled with Raman reporters and hybridized with placeholder DNAs were decorated on SERS substrate to fabricate SERS biosensor. Target miRNAs initiated the "inverse Molecular Sentinel" process. During the process, PHs were removed and the conformation of HPs changed toward the hairpin structure, thus eliciting the proximity of Raman reporter to substrate and a stronger SERS signal. The proposed SERS biosensor performs well in terms of stability, reproducibility, and selectivity. The limits of detection of miR-122-5p and miR-140-5p in serum were 4.17 aM and 4.49 aM, respectively. Finally, the fabricated SERS biosensor was applied to detect miR-122-5p and miR-140-5p in ICH patients and healthy subjects, and the results obtained by SERS were consistent with the results from quantitative real-time polymerase chain reaction, revealing the accuracy of the method. This simple, rapid approach offers great potential for the simultaneous detection of miRNAs in practical clinical applications.

Nanomaterial-Based Fluorescent Biosensor for Food Safety Analysis

Food safety issues have become a major threat to public health and have garnered considerable attention. Rapid and effective detection methods are crucial for ensuring food safety. Recently, nanostructured fluorescent materials have shown considerable potential for monitoring the quality and safety of food because of their fascinating optical characteristics at the nanoscale. In this review, we first introduce biomaterials and nanomaterials for food safety analysis. Subsequently, we perform a comprehensive analysis of food safety using fluorescent biosensors based on nanomaterials, including mycotoxins, heavy metals, antibiotics, pesticide residues, foodborne pathogens, and illegal additives. Finally, we provide new insights and discuss future approaches for the development of food safety detection, with the aim of improving fluorescence detection methods for the practical application of nanomaterials to ensure food safety and protect human health.

Flexible surface-enhanced Raman scatting substrates: recent advances in their principles, design strategies, diversified material selections and applications

Surface-enhanced Raman scattering (SERS) is widely used as a powerful analytical technology in cutting-edge areas such as food safety, biology, chemistry, and medical diagnosis, providing ultra-fast, ultra-sensitive, nondestructive characterization and achieving ultra-high detection sensitivity even down to the single-molecule level. Development of Raman spectroscopy is strongly dependent on high-performance SERS substrates, which have long evolved from the early days of rough metal electrodes to periodic nanopatterned arrays building on solid supporting substrates. For rigid SERS substrates, however, their applications are restricted by sophisticated pretreatments for detecting solid samples with non-planar surfaces. It is therefore essential to reassert the principles in constructing flexible SERS substrates. Herein, we comprehensively review the state-of-the-art in understanding, preparing and using flexible SERS. The basic mechanisms behind the flexible SERS are briefly outlined, typical design strategies are highlighted and diversified selection of materials in preparing flexible SERS substrates are reviewed. Then the recent achievements of various interdisciplinary applications based on flexible SERS substrates are summarized. Finally, the challenges and perspectives for future evolution of flexible SERS and their applications are demonstrated. We propose new research directions focused on stimulating the real potential of SERS as an advanced analytical technique for commercialization.

SERS-Active Composites with Au-Ag Janus Nanoparticles/Perovskite in Immunoassays for Staphylococcus aureus Enterotoxins

The accurate detection of Staphylococcus aureus enterotoxins (SEs) is vital for food safety owing to their high pathogenicity, which may be performed with surface-enhanced Raman scattering (SERS) if SERS-active nanostructures are used. Herein, a Au-Ag Janus nanoparticle (NPs)/perovskite composite-engineered SERS immunoassay was developed for SEC detection. Plasmonic Au-Ag Janus NPs demonstrated inherent SERS activity from the 2-mercaptobenzoimidazole-5-carboxylic acid ligands. CsPbBr₃@mesoporous silica nanomaterials (MSNs) were prepared and transformed into CsPb₂Br₅@MSNs in the aqueous phase. Paired SEC antibody-antigen-driven plasmonic Au-Ag Janus NP-CsPb₂Br₅@MSN composites were prepared. They showed amplified SERS activity, attributed to the depressed plasmonic decay due to electromagnetic field enhancement and the electron transfer mechanism. A positive relationship was established between SERS signals of composites and the SEC concentration. An additive-free SERS immunoassay was developed for simple, sensitive, and reproducible SEC detection. This study will be extended to develop multiple additive-free SERS-active plasmonic NP/perovskite composites that will open up the possibility of exploring more SERS detection probes for food safety monitoring.

Dual-wavelength responsive photoelectrochemical aptasensor based on ionic liquid functionalized Zn-MOFs and noble metal nanoparticles for the simultaneous detection of multiple tumor markers

A single tumor marker may correspond to a variety of diseases, and a specific disease requires the joint detection of multiple tumor markers for improving the accuracy of diagnoses. An ionic liquid-functionalized metal-organic framework (Zn-MOF microspheres) was used as the substrate to capture the aptamer (Ab1), and noble metal nanoparticles were used to label a signal aptamer (Ab2) to construct a dual-wavelength responsive sandwich-type photoelectrochemical (PEC) aptasensor. Due to the size effect, plasma resonance and the response of the noble metal nanoparticle enhancement system to different excitation wavelengths, the simultaneous detection of CEA and CA153 tumor markers was realized. Under the optimized conditions, CA153 and CEA at concentrations of 0.05-100 U mL^-1 and 0.005-10 ng mL^-1 were detected by the PEC aptasensor. Detection limits calculated for CA153 and CEA determinations were 0.0275 U mL^-1 and 2.85 pg mL^-1 (S/N = 3), respectively. CA153 and CEA in serum samples were detected by the PEC aptasensor, and their concentrations were well consistent with that obtained from the ELISA. In addition, the PEC aptasensor exhibited a recovery rate of 96.98%-103.4%, and a relative standard deviation of 1.1%-3.6%, indicating good practical value and accuracy, further confirming its potential for clinical diagnosis.

Perovskite Nanomaterial-Engineered Multiplex-Mode Fluorescence Sensing of Edible Oil Quality

Water-soluble fluorescence nanomaterials are widely applied for water-phase food safety monitoring. However, there is still a challenge for the development of oil-soluble fluorescence nanomaterials for oil-phase food safety detection. Particularly, the edible oil quality has a huge impact on human health, in which excessive acid number (AN), 3-chloro-1,2-propanediol (3-MCPD), and moisture content (MC) are critical monitoring factors. Herein, orange-emitting oil-soluble CsPbBr_1.5I_1.5 quantum dots (QDs) were prepared and applied for AN and 3-MCPD detection depending on fluorescence quenching and wavelength shifts. A "turn-off" fluorescence sensor and "wavelength-shift" fluorescence colorimetric sensor were fabricated for AN and 3-MCPD detection. Water-sensitive mesoporous silica-coated CsPbBr_1.5I_1.5 QDs were employed for the establishment of ratiometric fluorescence sensors for MC monitoring by introducing water-stable green-emitting CsPbBr₃ nanosheets (NSs) as reference probes. Perovskite nanomaterial-engineered multiplex-mode fluorescence sensors were proposed for the detection of AN, 3-MCPD, and MC in edible oil, with the limits of detection (LODs) of 0.71 mg KOH/g, 39.8 μg/mL 3-MCPD, and 0.45% MC, respectively. This work not only expands the application of perovskite nanomaterials in the bioanalysis field but also provides new materials and novel approaches for the multiplex-mode oil-phase food safety monitoring.

Surface-Enhanced Raman Scattering-Active Plasmonic Metal Nanoparticle-Persistent Luminescence Material Composite Films for Multiple Illegal Dye Detection

Uniform two-dimensional plasmonic nanoparticle (NP)-semiconductor composite films could retard the attenuation of electromagnetic evanescent wave and show intensive Raman activity for the multiplex monitoring of hazards in a practical food matrix. Here, an efficient Raman platform is developed by employing a plasmonic nanoparticle (NP)-persistent luminescence material (PLM) composite film. PLM show upconversion photoluminescence (UCPL) properties. The emitted photons are absorbed by plasmonic NPs, which further boost the surface plasmon resonance for the generation of high polarizability and induce strong electromagnetic strength for surface-enhanced Raman scattering (SERS) enhancement. A UCPL-assisted SERS-enhanced mechanism is proposed and verified. A plasmonic NP-PLM film with superior SERS activity and detection capability becomes an alternative candidate for the sensitive and multiple detection of illegal addition of dyes in a food matrix. The proposed UCPL-assisted SERS-enhanced mechanism provides promising future directions to this end to design a next-generation SERS-active plasmonic NP-PLM composite film for the specific detection in complex samples.